Database Info

[q] i9001 xxkf8

Hey guys,
I want to downgrade from 2.3.4 to 2.3.3 on a Samsung Galaxy Plus.
Where can I find the I9001 XXKF8 firmware, because someone told me that this is the original, and please tell me wich tutorial to use.
Thaks a lot.

have u check samfirmware? and u can flash with odin.

XXKF8
http://supportsamsung.pl/f1416/rom-i9001-rom-open-i9001xxkf8_oxakf1-6444/

annoymous1234 said:
have u check samfirmware? and u can flash with odin.
Click to expand...
Click to collapse
What to do ?
Please post me a corect tutorial link because I have finded 3 diffenrent tutotials.

AsafteiLaurentiu said:
What to do ?
Please post me a corect tutorial link because I have finded 3 diffenrent tutotials.
Click to expand...
Click to collapse
The link for the ROM is posted above, download that. Extract that, the password is linked to the post.
-Download ODIN Multidownloader 4.43. Link: http://www.google.fi/url?sa=t&rct=j...n4WHBA&usg=AFQjCNEnkhKjmSRxlKLFcVNdXh8nnFxU1A
-After it has downloaded, extract it anywhere u want (i suggest desktop, easier)
-RUN ODIN.
-Power off your phone.
-Put your phone into downloading mode. Hold together: Power+Volume Down+Home (phone boots to Downloading mode)
-Connect your phone to PC via USB cable.
-Wait for the drivers to install. After that, in ODIN, one of the top line "bars" should turn yellow and some text should appear there.
-Download the AriesVE.ops file and check it as OPS. Then check one package from the top left. Link to download: http://forum.xda-developers.com/attachment.php?attachmentid=770410&d=1320332631
-The ROM you've downloaded, check it as one package. Then click flash.
-Flashing will take about 9 minutes.
-Enjoy!

Thank`s dude .. I just hitted your thank`s button

Wich part must load, because when I extracted the firmware I founded 2 files:
SMD_CSC_GT-I9001-MULTI-CSC-OXAKF1_EMMC.smd 539MB
and
SMD_I9001XXKF8_I9001XXKF8_CL310526_REV00_user_low_ ship_EMMC.smd 50MB
Or I don`t extract and loar the archive ?
Thanks
Edit: It was the larger file. Thanks all.

So ... please tell me .. why in Kies I am receiving the message: This version of software can`t be upgraded .. or something like this ...

AsafteiLaurentiu said:
So ... please tell me .. why in Kies I am receiving the message: This version of software can`t be upgraded .. or something like this ...
Click to expand...
Click to collapse
Because there is no official update for your region or carrier. Just use odin to update

And when will be I will be able to update ... ?

AsafteiLaurentiu said:
And when will be I will be able to update ... ?
Click to expand...
Click to collapse
Right now if you want to. Theres already a thread on how to flash roms with odin. Reading strongly recommended

mikeeo019 said:
Right now if you want to. Theres already a thread on how to flash roms with odin. Reading strongly recommended
Click to expand...
Click to collapse
I want to update with the next official firmware ...
What I have to do ?

AsafteiLaurentiu said:
I want to update with the next official firmware ...
What I have to do ?
Click to expand...
Click to collapse
All the ROMs in this forum are stock roms from different carriers.
Edit: except Cranium RC3
Just read the guide. There's damn step by step instructions.

But I want it original from Kies ... understand ?

then connect ur device with kies and wait for an update

AsafteiLaurentiu said:
But I want it original from Kies ... understand ?
Click to expand...
Click to collapse
The ROMs here are similar to those updated via Kies. Maybe some applications can be different. I mean it can take quite long to get a regional update. If you're worried about your warranty, just take a backup of your current system.

[Q] [Help] Rooted but still havin yello triangl..and google play does not work

http://forum.xda-developers.com/showthread.php?t=1406880
Rooted using the above thread..
After installing clock work mod , when trying to install superuser i got some error and it said installation aborted...but after rebooting i found superuser was installed..
while trying to acces market i.e Google play it is not connecting to internet whereas all other applications are connecting to internet which i connected through wifi..
Also the yellow triangle still not gone..Please help me fix guys..?..This is my first post in xda..hope experts are there to help
Sorry guys fixed google play..It was problem with the date..
Now please anyone say how to remove the yellow triangle at start?...
And also i want to know whether superuser is installed perfectly because during the installation it aborted saying an error

Dude do your homework, there are already few threads about removing yellow triangle. You must flash VIA ODIN a stock kernel, or reflash (VIA ODIN) your fw. And then root your phone according to the guide above.
There are also two threads about erasing the download counter, I assume you're gonna be interested in that too.
Error with flashing su.zip means nothing if you find your device rooted anyway. None knows why it is like that.
Sent from my GT-I9103 using xda premium

Kochan ok leave that...
Now i did something and i am stuck in the samsung galxy r with yellow triangle boot screen nothin works..Please help..
Grr this is with warranty
Now what should i do..
I tried to restore and nothing happened after again booting
same place stuck..
waiting for your reply

Yellow triangle is just an additional information that you have flashed an insecure kernel, it's not a problem.
Have you tried to reflash your FW/stock kernel via Odin? that MUST remove your triangle, and that's always does it. Reflashing FW is not equal with factory reset.

Can you please provide me the link for the stock rom...because the link in xda stock rom thread is not working/?

what fw do you use?
Here you have all available firmwares (registrations is needed):
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9103&r=-1#modelsa
Password is: sammobile.com i guess

I9103XWKI5 (2.3.5)
i guess this one...but i am not sure..is it possible to check now..?
Can you please provide your gmail id to my pm so that i can chat directly till i get my mobile to my original state..As am a new user i am not able to post continously after every poost..
And can i restore all the contents from cwm which i backed up after flashing?

U check it this way:
on your dialpad press: *#1234#
Your PDA is your FW.
Here is the link to I9103XWKI5 (INU): http://hotfile.com/dl/138280077/f8390cd/GT-I9103_INU_I9103XWKI5_I9103ODDKH4_I9103DDKH4.rar.html
password: sampro.pl
here is the guide step by step:
http://forum.xda-developers.com/showthread.php?t=1406664
I am sorry but this is everything I can do for you now. I've got some work to do here.

But how doi chk the fw now since it is stuck at boot..Anyways i guess it must be this because i am from india everythin matches which i saif

a sorry I guess I misunderstood you are you able to enter the download mode?

yes i am able to enter the download mode...Now let me...
I am currently downloading the fw from sam mobile and the file size is 336 mb and the one you gave is 301mb..what is the difference? both are for I9103XWKI5?

I guess no difference. Probably just a compression. Anyway, download, extract rar and flash the .tar or .tar.md5 via odin, according to a guide.

Okay after flashing can i restore the backed up contents?..wil i get back the original state with apps and all data??

if you did a backup, then yes

How To Revert Back to Stock Rom (Galaxy Fit)

Hi Friends,
I'm using Galaxy Fit which runs Chocobread V 3.20. I feel Chocobread is litte bit slow. You guys please help me to revert back of stock rom(I'm From India). Kindly explain the way in detail.
Thanks in advance
Regards,
B Balamurali

balamurali said:
Hi Friends,
I'm using Galaxy Fit which runs Chocobread V 3.20. I feel Chocobread is litte bit slow. You guys please help me to revert back of stock rom(I'm From India). Kindly explain the way in detail.
Thanks in advance
Regards,
B Balamurali
Click to expand...
Click to collapse
Install stock ROM with Odin Multi Downloader for Galaxy Fit S5670. Download Beni 1.0.ops.
Download stock ROM for India from here:
http://www.sammobile.com/firmware/
Turn off cell phone. Push the Power, Home and Down button together. When the yellow triangle, connect cell phone and a computer with a USB cable.

so... just flash it,, like flashing a stock rom (that cannot be upgrade via KIES) or like flashing CWM using ODIN? even if i already convert the file system to ext 4. coz for CWM 5 not support RFS system (like creed rom) No bootloop will happend?
-----edit------
just readed here http://forum.xda-developers.com/showthread.php?t=1711857 i'll give it a shot...

zack_rains said:
so... just flash it,, like flashing a stock rom (that cannot be upgrade via KIES) or like flashing CWM using ODIN? even if i already convert the file system to ext 4. coz for CWM 5 not support RFS system (like creed rom) No bootloop will happend?
-----edit------
just readed here http://forum.xda-developers.com/showthread.php?t=1711857 i'll give it a shot...
Click to expand...
Click to collapse
*****
sir, I am not tech savvy. can you explain in details with the files needed?
Thanks,
Balamurali

balamurali said:
*****
sir, I am not tech savvy. can you explain in details with the files needed?
Thanks,
Balamurali
Click to expand...
Click to collapse
first you need beni.ops file.. (just google it and download)
and for the firmware either you require a "one package file"(.tar)
or 4 different files BOOT,PHONE,CSC,PDA. You can get a firmware for fit from sammobile.com
last thing you need is ODIN multidownloader 4.38 for fit or later..
open odin.exe
tick onepackage if you have a single .tar firware file.
if you have four files then you need to carefully place respective file in respective option in "select image to download" section of ODIN. leave EFS empty.
Click on start and wait till your phone boots.

Alright! Im back to stock rom
Sent from my GT-S5670 using xda app-developers app

Stock Firmware For Cyprus
Hello!!
Do you know if there is available firmware for Cyprus???
I was looking to google but i didnt find anything
THANKS (Sorry for my bad english)​

thats work dude thnx

I want to return to stock firmware after i install the "cm-10.2-20131012-EXPERIMENTAL-beni" but i can't find anywhere where i can download the latest 2.3.6 stock firmware has this mobile phone.
How i can find out which stock 2.3.6 firmware has this phone?
I don't know if it helps
s5670xwkt6
has it now.
Please HELP ME.

fits79 said:
I want to return to stock firmware after i install the "cm-10.2-20131012-EXPERIMENTAL-beni" but i can't find anywhere where i can download the latest 2.3.6 stock firmware has this mobile phone.
How i can find out which stock 2.3.6 firmware has this phone?
I don't know if it helps
s5670xwkt6
has it now.
Please HELP ME.
Click to expand...
Click to collapse
All the stock firmwares are available on www.sammobile.com/firmwares/

Harpratap said:
All the stock firmwares are available on www.sammobile.com/firmwares/
Click to expand...
Click to collapse
NO IT ISN'T.
Have you try to download any firmware for that site lately???
ALL THE FILES where uploaded to hotfile.com and now you can't download any of that so....

fits79 said:
NO IT ISN'T.
Have you try to download any firmware for that site lately???
ALL THE FILES where uploaded to hotfile.com and now you can't download any of that so....
Click to expand...
Click to collapse
The youtube link that I posted has mirrors to the same file.
Just google if you can't find. There are plenty of links available! :silly:

Which exactly rom i must download and install so the phone has the factory android 2.3.6?
Is that file correct from my gt-s5670?
I install it as one package file with odin program exist in that package as it show at the video and then i make the two clear choices from recovery menu.
THANKS

Happy Flashing
fits79 said:
Which exactly rom i must download and install so the phone has the factory android 2.3.6?
Is that file correct from my gt-s5670?
I install it as one package file with odin program exist in that package as it show at the video and then i make the two clear choices from recovery menu.
THANKS
Click to expand...
Click to collapse
Hi @fits79
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:

Dead link
Everyone gives the same HotFile dead link.I google it to get some more link options but every single one has finally reached the same dead link.
Come on guys! I need that 1.0 ops file! It's not available on the internet right now.

mericturkbikmaz said:
Everyone gives the same HotFile dead link.I google it to get some more link options but every single one has finally reached the same dead link.
Come on guys! I need that 1.0 ops file! It's not available on the internet right now.
Click to expand...
Click to collapse
Meriç bro now(şimdi) its cloosed from ABD hotfile

Abhishek_DK said:
Hi @fits79
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:
Click to expand...
Click to collapse
Its not GIO_1.0.ops.
Its BENI_v1.0.ops

all files r very important so always save those important file

Soft bricked Tipo

Hi there,
1. I am fed up of my Tipo's lagging touch (responding after half an hour, miscaliberation). I update the firmware using Sony companion and tried to install one of the Jelly Bean roms on the stock ICS using CMW. It some how soft bricked my phone. Can any one tell the reason?
2. With lot of effort I installed the stock ST21a 11.0.A.4.22 Sony Generic kernel (using Flashtool). It is same laggy and miscaliberating. Did I not reformat, similar to PC? shouldn't it be fresh and new ?
3. I am not trying to install JB rom. What is the correct way to install? Should I worry about any seperate parts like Kernel?
4. To install JB rom (Paranoid Android) I tried to root the device, but the flash tool says "no root exploit for this version". If i cant root. I cant install CMW. I cant install frest rom. Is there any other way to install ROM?
I am stuck in the above points after my research, and will appreciate your help.
Thanks in advance

adithyavr said:
Hi there,
1. I am fed up of my Tipo's lagging touch (responding after half an hour, miscaliberation). I update the firmware using Sony companion and tried to install one of the Jelly Bean roms on the stock ICS using CMW. It some how soft bricked my phone. Can any one tell the reason?
2. With lot of effort I installed the stock ST21a 11.0.A.4.22 Sony Generic kernel (using Flashtool). It is same laggy and miscaliberating. Did I not reformat, similar to PC? shouldn't it be fresh and new ?
3. I am not trying to install JB rom. What is the correct way to install? Should I worry about any seperate parts like Kernel?
4. To install JB rom (Paranoid Android) I tried to root the device, but the flash tool says "no root exploit for this version". If i cant root. I cant install CMW. I cant install frest rom. Is there any other way to install ROM?
I am stuck in the above points after my research, and will appreciate your help.
Thanks in advance
Click to expand...
Click to collapse
First Of All Its CWM
Secondly You Should Try Locking The Bootloader And Reflash The ftf Or in PC Companion Click Update And Then Repair Phone

Re
Asingh18 said:
First Of All Its CWM
Secondly You Should Try Locking The Bootloader And Reflash The ftf Or in PC Companion Click Update And Then Repair Phone
Click to expand...
Click to collapse
Thanks a lot for the insightful post of two lines. Have already tried that. Can any one reply point by point. I want the answer more in perspective of learning than one time solution.
Thanks

OK I Got Your Back
adithyavr said:
Thanks a lot for the insightful post of two lines. Have already tried that. Can any one reply point by point. I want the answer more in perspective of learning than one time solution.
Thanks
Click to expand...
Click to collapse
FIRSTLY BACKUP THE IMPORTANT STUFF
Steps To Follow -
1. Download Flashtool (I'm Guessing You Don't Have That Yet)
2. Click On The Thunder Icon
3. Click Flashmode
4. There You Would Find A .ftf File Saying Device X10 Version V1 BRELock bla bla..Click OK
5. Then Take Out Your Sd Card And SIM Card And Using A USB Cable Connect Your Device While Pressing The Down Button
6. If You See A Green LED Flash On Your Phone Just Wait Until It Flashes
7. After flashing Is Complete Let Your Phone Reboot
8. Then Attach Your Device To Your PC
9. Go to PC Companion And Press Update Device
10. It Would Say You Don't Have An Update And Have An Option "Repair Phone"
11. Click On That Wait Until It Downloads And Updates
And Viola Your Phone Would Look Fresh As A New One

Asingh18 said:
FIRSTLY BACKUP THE IMPORTANT STUFF
Steps To Follow -
1. Download Flashtool (I'm Guessing You Don't Have That Yet)
2. Click On The Thunder Icon
3. Click Flashmode
4. There You Would Find A .ftf File Saying Device X10 Version V1 BRELock bla bla..Click OK
5. Then Take Out Your Sd Card And SIM Card And Using A USB Cable Connect Your Device While Pressing The Down Button
6. If You See A Green LED Flash On Your Phone Just Wait Until It Flashes
7. After flashing Is Complete Let Your Phone Reboot
8. Then Attach Your Device To Your PC
9. Go to PC Companion And Press Update Device
10. It Would Say You Don't Have An Update And Have An Option "Repair Phone"
11. Click On That Wait Until It Downloads And Updates
And Viola Your Phone Would Look Fresh As A New One
Click to expand...
Click to collapse
He said that he already tried that! Oh, and capital letters are just for the first word of a sentence and names. Not Like This.
@OP: have you tried this:
http://forum.xda-developers.com/xperia-j-e/themes-apps/apk-touch-issue-solved-t2068082
It's an .apk that let's you recalibrate your touch(official patch by Sony).
Hope that helps!
Mats
Sent from my Xperia E dual using XDA Premium 4 mobile app

MatsPunt said:
He said that he already tried that! Oh, and capital letters are just for the first word of a sentence and names. Not Like This.
@OP: have you tried this:
http://forum.xda-developers.com/xperia-j-e/themes-apps/apk-touch-issue-solved-t2068082
It's an .apk that let's you recalibrate your touch(official patch by Sony).
Hope that helps!
Mats
Sent from my Xperia E dual using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey man appreciate it
He said that he tried flashing the stock ftf i'm recommending him to use PC Companion

Asingh18 said:
Hey man appreciate it
He said that he tried flashing the stock ftf i'm recommending him to use PC Companion
Click to expand...
Click to collapse
Yeah, but those two have the same effect. Repairing with PC Companion is exactly the same as flashing a .ftf. And if that didn't work, PC Companion won't.
Mats
Sent from my Xperia E dual using XDA Premium 4 mobile app

[Resolved] needing help with a philips android phone

Hi everyone,
After being guest for a long time here i decided to register to ask for help.
But first, I want to thank everyone here for the very useful info cuz I revived my old phone and tweaked it a lil thanks to XDA guides. Thank u everyone.
Well. To the business.
I have now a Philips s388_m6582k dual sim smartphone and I did a hard reset due to apps laggin and other problems. But after it rebooted, the 1st use wizard works til a part where it forces closes and stop working. Then the screen stays black and does nothing. I can use the notification area and go to the settings, but I can't make it is to the android desktop aka launcher. I want to try to flash it with the stock ROM to see if I can revive it, but I don't have it and also don't know if it will restore the phone to it's default status as if it were new.
Plz, give me a hand to fix it. Also if I shutdown or reboot the phone from that black screen, it goes boot loop. The phone was rooted before the hard reset. What I can do now? I need to use it.
hope anyone reply me soon.
thnks in advice.

Download your stock ROM and flash using sp tool I think you know how.(If you don't know how just ask) and yes you will get your phone to default version
But if you're flashing your stock ROM do keep in mind that all your data will be lost,so do a backup

[email protected] said:
Download your stock ROM and flash using sp tool I think you know how.(If you don't know how just ask) and yes you will get your phone to default version
But if you're flashing your stock ROM do keep in mind that all your data will be lost,so do a backup
Click to expand...
Click to collapse
well, thnks for reply.
i forgot to mention that the device is running android kitkat 4.4 and i already backed up user data.
well, about the flashing.... i've never used sp flash tool, just odin.
can u explain me how to use it and where to get the rom?
note that the rom that i need is for the dual sim version of this phone. and i need it on spanish, due to where im located (chile).
so, if u dont mind on helping... :good:
also i found that there are 2 versions of the rom when i searched for it.
but when i get more info about the device, ill post the build version.

rivenroth740 said:
well, thnks for reply.
i forgot to mention that the device is running android kitkat 4.4 and i already backed up user data.
well, about the flashing.... i've never used sp flash tool, just odin.
can u explain me how to use it and where to get the rom?
note that the rom that i need is for the dual sim version of this phone. and i need it on spanish, due to where im located (chile).
so, if u dont mind on helping... :good:
also i found that there are 2 versions of the rom when i searched for it.
but when i get more info about the device, ill post the build version.
Click to expand...
Click to collapse
Download sp flash tool for pc .install it and open it.
Select scatter loading and browse through the stock ROM you downloaded and find the scatter text.click download in sp flash tool ,power off your device and plug to PC using USB ,wait for the success notification
Flash with Odin if you want .http://firmwarefile.com/philips-s388
Also check this page

[email protected] said:
Download sp flash tool for pc .install it and open it.
Select scatter loading and browse through the stock ROM you downloaded and find the scatter text.click download in sp flash tool ,power off your device and plug to PC using USB ,wait for the success notification
Flash with Odin if you want .http://firmwarefile.com/philips-s388
Also check this page
Click to expand...
Click to collapse
does this work with the dual sim version?

[email protected] said:
Download sp flash tool for pc .install it and open it.
Select scatter loading and browse through the stock ROM you downloaded and find the scatter text.click download in sp flash tool ,power off your device and plug to PC using USB ,wait for the success notification
Flash with Odin if you want .http://firmwarefile.com/philips-s388
Also check this page
Click to expand...
Click to collapse
also, what about the imei and the efs partition?
also, i still have to upload some captures of the error.

rivenroth740 said:
also, what about the imei and the efs partition?
also, i still have to upload some captures of the error.
Click to expand...
Click to collapse
I have flashed a stock ROM a handful of time but I never lost my imei number ,maybe once but a normal reboot fixed it.

[email protected] said:
I have flashed a stock ROM a handful of time but I never lost my imei number ,maybe once but a normal reboot fixed it.
Click to expand...
Click to collapse
well, i dont undertand how SP flash tool works.
and i dont know how to install the drivers.
i tried to install drivers using a video tutorial, but it does nothing. any help?
also, how do u use odin to flash this phone?
how i enter download mode on this phone?
i already tried to flash it, but i cant make it work (sp flash tool)

rivenroth740 said:
well, i dont undertand how SP flash tool works.
and i dont know how to install the drivers.
i tried to install drivers using a video tutorial, but it does nothing. any help?
also, how do u use odin to flash this phone?
how i enter download mode on this phone?
i already tried to flash it, but i cant make it work (sp flash tool)
Click to expand...
Click to collapse
Well you don't need to install drivers on windows PC unless your phone can't be recognised. Where are you having trouble in sp ? It's the easiest way to flash stock firmware.

[email protected] said:
Well you don't need to install drivers on windows PC unless your phone can't be recognised. Where are you having trouble in sp ? It's the easiest way to flash stock firmware.
Click to expand...
Click to collapse
well, i open it, i select scatter, then what i do?
i mean, how i do have to connect the phone?
what mode?
volume up+power: recovery
volume down+power: factory test
as i know, the phone shoulda enter a download mode. so the problem is on how i have to connect the phone.

Just extract the zip file for your firmware open sp flash tool ,select scatter loading and browse through the extracted zip file to see android scatter.txt ,just click download on the tool and connect your powered off phone to PC through USB after and wait for the confirmation.
Here's the your phones driver http://gsmusbdriver.com/philips-s388 with tutorial for install BTW.

[email protected] said:
Just extract the zip file for your firmware open sp flash tool ,select scatter loading and browse through the extracted zip file to see android scatter.txt ,just click download on the tool and connect your powered off phone to PC through USB after and wait for the confirmation.
Here's the your phones driver http://gsmusbdriver.com/philips-s388 with tutorial for install BTW.
Click to expand...
Click to collapse
ok, ill try it out :good:

rivenroth740 said:
well, i open it, i select scatter, then what i do?
i mean, how i do have to connect the phone?
what mode?
volume up+power: recovery
volume down+power: factory test
as i know, the phone shoulda enter a download mode. so the problem is on how i have to connect the phone.
Click to expand...
Click to collapse
Just click download in the tool and then turn off your phone completely (no mode) then plug it through USB wait for success notification.
PS first boot take some time 10-15 min maybe

[email protected] said:
Just click download in the tool and then turn off your phone completely (no mode) then plug it through USB wait for success notification.
Click to expand...
Click to collapse
ill try it out when i arrive at home.
then ill post if it worked or not.
hope it works. :good: :fingers-crossed:

[email protected] said:
Just click download in the tool and then turn off your phone completely (no mode) then plug it through USB wait for success notification.
PS first boot take some time 10-15 min maybe
Click to expand...
Click to collapse
well, i tried to do as u said, but when i connect the phone, it does nothing. just start charging (the battery icon appears) then goes stand-by.
also, SP flash tool does nothing when i press download. this is, after selecting the scatter. windows doesn't seems to recognize it.
so,
what i can do?
PD: also, here are some screenshots of what the phone does if i turn it on.
the setup wizard starts, then i can go on til it crashes.
anyways, i can swipe the notification/status bar and open settings. but the setup wizard never finishes and i cant get to the launcher/desktop to use it. no matter if there is a sim/sdcard.
so thats why i got the idea of reflash it to fix this problem.
i atacched some screenshots.
PD2: i forgot to mention that, if i try to shutdown/restart it, it goes to bootloop.

[email protected] said:
Just click download in the tool and then turn off your phone completely (no mode) then plug it through USB wait for success notification.
PS first boot take some time 10-15 min maybe
Click to expand...
Click to collapse
do i have to remove the battery or not?
EDIT: after various attemps, i found a videotutorial on how to fix this.
https://www.youtube.com/watch?v=oMqUdrsfxbw
and i found what was going wrong. it was the sp flash tool version.
i downloaded the same version as shown on the video and did the same as the video and....
VOILE!!! it worked!!! YAY!! n.n
but now, the only thing that i still have to do, is to get a rom with spanish, cuz i dont want it on english.
but at least, i fixed the main problem.
so here are my thanks.

so, now i need the spanish rom. can u help me to get it?
by now, i learned how to use sp flash tool. thnk u so much n.n
edit: the rom must be android 4.4.2
when I have the ROM in Spanish, this issue can be taken for closed and solved.
thanks in advance.
edit 2: hope this thread can be helpful and used by other users to solve this issue on this phone.

rivenroth740 said:
so, now i need the spanish rom. can u help me to get it?
by now, i learned how to use sp flash tool. thnk u so much n.n
edit: the rom must be android 4.4.2
when I have the ROM in Spanish, this issue can be taken for closed and solved.
thanks in advance.
edit 2: hope this thread can be helpful and used by other users to solve this issue on this phone.
Click to expand...
Click to collapse
I'm not using this phone so I've had to look up for this as well.I'll share the link for Spanish ROM when I find it .the country of the ROM doesn't matter. Also can you try to change language in the language and input tab in settings

[email protected] said:
I'm not using this phone so I've had to look up for this as well.I'll share the link for Spanish ROM when I find it .the country of the ROM doesn't matter. Also can you try to change language in the language and input tab in settings
Click to expand...
Click to collapse
thnks for reply.
well, i cant change the language to spanish.due to the fact that the rom dont have the language included. it only includes english, vietnamit, russian, korean, chinese and japanese. so thats why i need the rom including spanish.
about the country...
i dont care about it. i just care about the rom having spanish included. the original one had english, portuguese and spanish. maybe it was the one located for argentina or latin america. but anyways, as i said, the country/locale isnt important.
thnks in advance. :good:
hope u can help me to find the rom. i already made a search, but no luck. there is a jellybean rom, but the phone runs kitkat 4.4.2 as it was the stock system and the 4.2 one is for the single sim version. and the dual sim version that i found with kitkat dont have the spanish included.
waiting for ur reply.

rivenroth740 said:
thnks for reply.
well, i cant change the language to spanish.due to the fact that the rom dont have the language included. it only includes english, vietnamit, russian, korean, chinese and japanese. so thats why i need the rom including spanish.
about the country...
i dont care about it. i just care about the rom having spanish included. the original one had english, portuguese and spanish. maybe it was the one located for argentina or latin america. but anyways, as i said, the country/locale isnt important.
thnks in advance. :good:
hope u can help me to find the rom. i already made a search, but no luck. there is a jellybean rom, but the phone runs kitkat 4.4.2 as it was the stock system and the 4.2 one is for the single sim version. and the dual sim version that i found with kitkat dont have the spanish included.
waiting for ur reply.
Click to expand...
Click to collapse
can't find the Spanish ROM either.
Stick with the English version or a custom ROM like cm12(this is lollipop and is released for your phone ) I recall cm12 having espanol language.