My phone was bricked due to OTA update.
Then i reflashed it via RSD and using latest stock kitkat firmware.
Phone is working great , but when I switch it off and then start it ,
it always goes to bootloader mode and I have to use three button combination ( Vol up , down and power button ) for boot start up menu
and select normal boot to make it work again.
Any way to make normal boot up as default because it always goes to bootloader mode when I start my device.
Droid Razr Maxx HD
Lastest Kitkat Firmware.
Thank You.
What does it say when it's it in BL mode? Are you getting a sticky-bit or flash failure message?
Sent from my HTC6525LVW using Tapatalk
MATHReX said:
My phone was bricked due to OTA update.
Then i reflashed it via RSD and using latest stock kitkat firmware.
Phone is working great , but when I switch it off and then start it ,
it always goes to bootloader mode and I have to use three button combination ( Vol up , down and power button ) for boot start up menu
and select normal boot to make it work again.
Any way to make normal boot up as default because it always goes to bootloader mode when I start my device.
Droid Razr Maxx HD
Lastest Kitkat Firmware.
Thank You.
Click to expand...
Click to collapse
Have you modified the sbf xml before flashing? Have you tried to factory reset after flashing? Try to download again the original sbf and reflash it.
RikRong said:
What does it say when it's it in BL mode? Are you getting a sticky-bit or flash failure message?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Yeah I Had Sticky Bit Bootloader . I Found The Solution For It , Just Need To Run Simple Command via cmd And It's Done.
Still Thanks For Your Help Buddies.
MATHReX said:
Yeah I Had Sticky Bit Bootloader . I Found The Solution For It , Just Need To Run Simple Command via cmd And It's Done.
Still Thanks For Your Help Buddies.
Click to expand...
Click to collapse
What command do you used?
MATHReX said:
My phone was bricked due to OTA update.
Then i reflashed it via RSD and using latest stock kitkat firmware.
Phone is working great , but when I switch it off and then start it ,
it always goes to bootloader mode and I have to use three button combination ( Vol up , down and power button ) for boot start up menu
and select normal boot to make it work again.
Any way to make normal boot up as default because it always goes to bootloader mode when I start my device.
Droid Razr Maxx HD
Lastest Kitkat Firmware.
Thank You.
Click to expand...
Click to collapse
Use this command in fastboot mode:
Code:
fastboot oem fb_mode_clear
Related
I've just tried to root my wifi only Xoom using the 1 click method, but didn't see there was a tab for wifi only & a 3G tab. I went through the options using the 3G options.
Now my Xoom's stuck at the red Motorola screen & won't go any further.
Are there any threads to reverse my balls up?? I've had a look but can't see anything
Please tell me I've not bricked it?!?
tell me why you posted this in the wrong section
I could tell you that it's not bricked...but then I might be lying.
Moved to Q&A. This is not development.
You will need to adb and flash recovery then flash the rom again.
Sent from my PC36100 using Tapatalk
PaulG1488 said:
tell me why you posted this in the wrong section
Click to expand...
Click to collapse
Sorry, I didn't realise I'd put it in the wrong place.
Do you know if I've stuffed my Xoom?
thanks
alex2792 said:
You will need to adb and flash recovery then flash the rom again.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Do you know how I do this. I can't get adb working??
So the Xoom isn't recognizes when you type adb devices?
Sent from my PC36100 using Tapatalk
alex2792 said:
So the Xoom isn't recognizes when you type adb devices?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
It's ok alex, I've managed to get the stock boot & system images on it again. Just updating to 3.1 again now.
clemo71 said:
It's ok alex, I've managed to get the stock boot & system images on it again. Just updating to 3.1 again now.
Click to expand...
Click to collapse
how do you solved ? ive the same problem on my xoom...
davidebeatrice said:
how do you solved ? ive the same problem on my xoom...
Click to expand...
Click to collapse
clemo71 said:
It's ok alex, I've managed to get the stock boot & system images on it again. Just updating to 3.1 again now.
Click to expand...
Click to collapse
Please let us poor souls know how you did it!!! I am stuck with the same problem - the screen freezes with the Motorola logo and the tablet wouldn't boot up!
For those still having issues, try going into fastboot and flashing the stock images.
You can access fastboot by restarting your xoom (power and vol up) and then once the red M comes up, tap the volume down key around a second later. You have a decent window of opportunity to press the key. This should take you to the bootloader. Once in there, use the volume down key to enter fastboot.
From fastboot you can either flash a custom recovery then from the recover install the BRD 3.1 rooted update, or you can just use the fastboot flash command to flash each partition back to stock.
Good luck.
willverduzco said:
For those still having issues, try going into fastboot and flashing the stock images.
You can access fastboot by restarting your xoom (power and vol up) and then once the red M comes up, tap the volume down key around a second later. You have a decent window of opportunity to press the key. This should take you to the bootloader. Once in there, use the volume down key to enter fastboot.
From fastboot you can either flash a custom recovery then from the recover install the BRD 3.1 rooted update, or you can just use the fastboot flash command to flash each partition back to stock.
Good luck.
Click to expand...
Click to collapse
Thanks . I have now installed custom recovery (ClockworkMod 3.0.2.8) but where do I get the rooted or stock ROM from? I suppose it has to be in a *.zip format.
Hey guys,
i have a rooted A700 with the 2. method of this thread http://forum.xda-developers.com/showthread.php?t=1727105 . Now i want to install JB, but normal update wont work because of rooting the device, since then i am forced to use CWM. I tried the CWM-based Recovery 6.0.1.4 but getting error "FAILED (remote: (00120000))" when i flash it via fastboot. Note Bootloader is unlocked!
I then tried to flash the stock-recovery, because i thought the rooting might have overwritten something, but i get the same error.. i searched for the code, but didnt find anything which could lead me in a direction to search for the origin of the problem..
Hope any of you guys can help me..
hellooooooooo well.....i ll try to help u:
1) Download the CWM 6.0.1.5 version (http://forum.xda-developers.com/showthread.php?t=1791165)
2) Get the tablet into the fastboot mode (Vol - & PWR....and then cycle the rotation lock)
2) Reflash the CWM (command: fastboot flash recovery <archive.img>
3) Download the JB Rom (recommend: GB Version or Nightly Version)
4) Root the tablet with a JB Root.....NOT A ICS ROOT
I think u dont ve problems with the bootloader then u dont ve to reflash that product.
Tell me.....
Hey,
thanks for the advice, but that was the same thing i have dont over and over again i couldnt flash any new recovery in fastboot mode even it was unlocked..
got my jb update now through flashing the stock French FULL Rom and updating via Acer Update
Chris0706 said:
Hey,
thanks for the advice, but that was the same thing i have dont over and over again i couldnt flash any new recovery in fastboot mode even it was unlocked..
got my jb update now through flashing the stock French FULL Rom and updating via Acer Update
Click to expand...
Click to collapse
Sometimes, as experience with flashboot and NVFlash, we either try a different PC, or a different USB port. Even an improper USB cable can mess things up. Personally, I use my HTC cable for both the 501 and 701.
still not working?
Didnt try cwm mod again since my jelly bean update worked with the stock French ROM.
ok.....did u root it???
i try to follow this thread to flash cwm6.0.1.5 but i got the "waiting for device" for a long time after type this command "fastboot flash recovery recovery-a700-6015.img" anybody encounter the same problem? and any solution?
http://forum.xda-developers.com/showthread.php?t=1791165
Thanks!!
kongheyfatchoy said:
i try to follow this thread to flash cwm6.0.1.5 but i got the "waiting for device" for a long time after type this command "fastboot flash recovery recovery-a700-6015.img" anybody encounter the same problem? and any solution?
http://forum.xda-developers.com/showthread.php?t=1791165
Thanks!!
Click to expand...
Click to collapse
did u get the fastboot mode to flash the recovery? Because your tablet NEED to get that mode.
freejack84 said:
did u get the fastboot mode to flash the recovery? Because your tablet NEED to get that mode.
Click to expand...
Click to collapse
how can i get the fastboot mode? I press power + vol down to start my tablet, but it seems only go to recovery mode.
To get the fasboot mode: Vol - & PWR, wait the short vibrate and then CYCLE THE ROTATION LOCK.
Look the screen, if u have the line: ......USB Fastboot mode......DONE (or something like that)
Use the fastboot command now and then use the command adb reboot to "reboot" again ur tablet.
freejack84 said:
To get the fasboot mode: Vol - & PWR, wait the short vibrate and then CYCLE THE ROTATION LOCK.
Look the screen, if u have the line: ......USB Fastboot mode......DONE (or something like that)
Use the fastboot command now and then use the command adb reboot to "reboot" again ur tablet.
Click to expand...
Click to collapse
I try to switch on and off repeatedly the rotation lock after the vibrate but still cannot see the line "...USB Fastboot mode..." instead it directly boot to the normal screen.
ROTATION LOCK is the button next to the Vol + key, right?
Thanks
the rotation lock is like a "switch"....
try this:
1) push the Vol - and keep ur finger there.
2) turn on ur tablet
3) wait the vibrate and cycle the rotation lock but WHILE your finger still at the VOL -
Sorry for my bad english.....
freejack84 said:
the rotation lock is like a "switch"....
try this:
1) push the Vol - and keep ur finger there.
2) turn on ur tablet
3) wait the vibrate and cycle the rotation lock but WHILE your finger still at the VOL -
Sorry for my bad english.....
Click to expand...
Click to collapse
Done and successfully flash cwm 6.0.1.5!! Thanks!!
kongheyfatchoy said:
Done and successfully flash cwm 6.0.1.5!! Thanks!!
Click to expand...
Click to collapse
Gooodddddd. Your welcome mate.
Does anyone know the fastboot command to switch the default boot mode back to regular?
slayp00n said:
Does anyone know the fastboot command to switch the default boot mode back to regular?
Click to expand...
Click to collapse
Usually it will boot in fastboot mode if you have a bad flash. What is the message when the phone boots up?
Sent from my XT925 using Tapatalk 2
danifunker said:
Usually it will boot in fastboot mode if you have a bad flash. What is the message when the phone boots up?
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
stickybit factory_fastboot.
I never had a bad flash. I run cm10.1, but gps was not working someone said flashing stock then reflash cm10.1
So i used that stupid RSD LITE to flahs factory, all i did was fix the xml and erase the recovery flash. It worked fine the phone booted... Then I reflashed cm10.1 which works? Is there an oem command to kill the sticky bit?
I have tha solution!
slayp00n said:
stickybit factory_fastboot.
I never had a bad flash. I run cm10.1, but gps was not working someone said flashing stock then reflash cm10.1
So i used that stupid RSD LITE to flahs factory, all i did was fix the xml and erase the recovery flash. It worked fine the phone booted... Then I reflashed cm10.1 which works? Is there an oem command to kill the sticky bit?
Click to expand...
Click to collapse
excuse me for the next font and style, but I have a lot of time reading post forums and any track that help me to resolve this, and I found!! IN French but, no matter!!
To resolve the message and constantly booting into AP Fastboot, you need (into AP FASTBOOT MODE) put this command in your PC with fastboot
fastboot oem fb_mode_clear
Then press power and voilá... you phone boot normally...
:highfive:
:good::good::good:
alvaro_castro said:
excuse me for the next font and style, but I have a lot of time reading post forums and any track that help me to resolve this, and I found!! IN French but, no matter!!
To resolve the message and constantly booting into AP Fastboot, you need (into AP FASTBOOT MODE) put this command in your PC with fastboot
fastboot oem fb_mode_clear
Then press power and voilá... you phone boot normally...
:highfive:
Click to expand...
Click to collapse
this doesnt fix my issue with boot to bootloader.
atifsh said:
this doesnt fix my issue with boot to bootloader.
Click to expand...
Click to collapse
Well, does your fastboot screen have that message?
If not, what does it say?
killrhythm09 said:
Well, does your fastboot screen have that message?
If not, what does it say?
Click to expand...
Click to collapse
device is locked, status code 0
battery ok
.
.
.
.
,
fastboot reason: flash failure
all i tried was test to boot recovery, not flash,
fastboot boot rec.img
ok so i fastboot flashed stock recovery and it flashed fine and now im no more stuck in bootloader.
and that takes me to my second question/.....
1: can i fastboot flash stock recovery in the first place if im 100% stock, locked and non rooted on the latest kitkat ota
2: can i fastboot flash just the system.img like i flashed recovery and if that is possible hope towelroot will do the work????
I was trying to get the latest twrp '2.8.7.2'. I downloaded it and flashed the img to recovery and nothing seemed to happen so I tried flashing it to boot then I tried to reboot the system. Now when I try to turn it on I get stuck on the Google like it is turning but it just gets stuck. I tried Charging it now when I charge it I get stuck on the battery logo. When I try booting it Booting it into recovery(twrp) I get a black screen. I can tell the Screen is on because of the dim glow it gives off but it is not doing anything. Note: I am some what of a noob when it comes to this stuff, My nexus 5 was running Marshmallow, and I was running the Xtra smooth rom (it is very close to stock). Plz help. I have also just found out that the reason im getting the bootloop is I flashed the wrong version of TWRP need a fix PLZ HELP.
Did you try flashing stock recovery or twrp 2.8.7.1?
audit13 said:
Did you try flashing stock recovery or twrp 2.8.7.1?
Click to expand...
Click to collapse
I cant flash anything because it is stuck. If you can tell me how to do that it would be great. also I gave you the thanks thing.
Judah04 said:
I cant flash anything because it is stuck. If you can tell me how to do that it would be great. also I gave you the thanks thing.
Click to expand...
Click to collapse
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
asawoszc said:
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
Click to expand...
Click to collapse
When i boot into recovery mode the screen is on but it is black.
asawoszc said:
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
Click to expand...
Click to collapse
Also yes i do think I flashed the wrong TWRP. how do I flash the correct TWRP when I can't even get back into a tool to flash it?
Judah04 said:
When i boot into recovery mode the screen is on but it is black.
Click to expand...
Click to collapse
You dont need recovery, you need bootloader.
telep said:
You dont need recovery, you need bootloader.
Click to expand...
Click to collapse
Can you please explain to me exactly what to do. thank you. also my bootloader is unlocked. I also can get to fastboot so what is the diffrence between bootloader and fastboot.
Hold down the volume +, volume -, and power button. You'll be taken to a screen with the word START at the top. Now, connect the phone to your Windows computer using the USB cable, open a command prompt and type "fastboot flash recovery nameof twrpfile.img", press the enter key, use the volume button to select recovery, use the power button to enter recovery, press the power button, press volume + button, and you should enter TWRP.
Thank you but I do not own a windows computer
Then look up the respective commands. You flashed twrp over your kernel, you need to flash a proper boot.img (kernel) if you want the phone to boot. Fastboot is ran through bootloader. Flash the proper kernel in bootloader using fastboot.
wangdaning said:
Then look up the respective commands. You flashed twrp over your kernel, you need to flash a proper boot.img (kernel) if you want the phone to boot. Fastboot is ran through bootloader. Flash the proper kernel in bootloader using fastboot.
Click to expand...
Click to collapse
Thank you this sounds like it will work. But can you put it in more simple terms and give me links? plz. thx in advance.
Do you have access to a Windows computer to flash the commands? How did you flash TWRP?
audit13 said:
Do you have a computer?
Click to expand...
Click to collapse
I have a macbok air running mac os x 10.5.8.
audit13 said:
Do you have access to a Windows computer to flash the commands? How did you flash TWRP?
Click to expand...
Click to collapse
I flashed TWRP using the TWRP app it installed TWRP 2.8.7.1 I also unlocked the bootloader with a similar app.
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
audit13 said:
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
Click to expand...
Click to collapse
Just cheked it out I tried it and it didn't work but thx anyway. btw I am running android 6.0.
audit13 said:
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
Click to expand...
Click to collapse
It might not have been working because I did not enable USB Debuging. :crying:
USB debugging is required for adb commands. With fastboot mode, debugging isn't necessary.
audit13 said:
USB debugging is required for adb commands. With fastboot mode, debugging isn't necessary.
Click to expand...
Click to collapse
Can you please walk me through this i am some what of a beginner when it comes to some of these things. I can try the tool kits agin but need help.
Hi,
I was trying to flash TWRP, but now I am stuck with flashing TWRP logo after rebooting or powering the phone on.
I am unable to get to the fastboot.
STEPS I did before brick:
1. unlocked OEM via official way
2. flashed TWRP
3. after that my phone was reset however most of the apps was missing, I was trying to do factory reset once again but it failed with the message "Data partition was heavily damaged"
4. I re-locked EOM
5. brick as mentioned above
Please help, I have the phone only two weeks and I have no idea how to fix this without fastboot.
Thank you.
Meiton said:
Hi,
I was trying to flash TWRP, but now I am stuck with flashing TWRP logo after rebooting or powering the phone on.
I am unable to get to the fastboot.
STEPS I did before brick:
1. unlocked OEM via official way
2. flashed TWRP
3. after that my phone was reset however most of the apps was missing, I was trying to do factory reset once again but it failed with the message "Data partition was heavily damaged"
4. I re-locked EOM
5. brick as mentioned above
Please help, I have the phone only two weeks and I have no idea how to fix this without fastboot.
Thank you.
Click to expand...
Click to collapse
Sounds like you flashed the 3030 version of TWRP. Download the 3020 version and put it in your fastboot folder. Plug in the USB to PC
Hold power and volume up untill the phone reboots. While it's still off immediately change to power and volume down and hold till it goes into fastboot (bootloader)
Now fastboot flash recovery TWRP.img
With the 3020 version.
Unplug the USB and hold power and volume up until it says the phone is booting.. let go and TWRP will load.
Go to Wipe / format data / type yes
Reboot to system and your all set
Sent from my Nexus 6P using Tapatalk
clsA said:
Sounds like you flashed the 3030 version of TWRP. Download the 3020 version and put it in your fastboot folder. Plug in the USB to PC
Hold power and volume up untill the phone reboots. While it's still off immediately change to power and volume down and hold till it goes into fastboot (bootloader)
Now fastboot flash recovery TWRP.img
With the 3020 version.
Unplug the USB and hold power and volume up until it says the phone is booting.. let go and TWRP will load.
Go to Wipe / format data / type yes
Reboot to system and your all set
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
So I've tried that but the phone is still booting to recovery (flashing TWRP logo) no matter what.
Basically the phone is always on now because if hold the power button (or any other combination) for a few second it will just reboot back.
I have an access only to ADB, but I am not able to boot to bootloader at all, it seems the bootloader is damaged somehow.
Also that warning about unlocked OEM doesn't have that text saying "hold volume up to boot to recovery" etc. like before brick.
Hi there,
Try using the Huawei Multi Tool with the Unbrick option : https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
Speaking from experience, this little fellow helped me recover my phone when I bricked it ON DAY ONE after failed root attempt... (Derp)
Let me know if it helped you
(Leave a thanks if it did )
EDIT : This tool is also useful if you want to get lazy whilst rooting. I use it constantly when flashing diffrent bits and pieces
Clearly follow My steps To unbrick and get normal device ::
Step 1 ::
Download the full firmware of your device.
Step 2 :
make sure that your bootloader is in unlocking state
Follow the video blindly ::: https://youtu.be/OMKDnBqbi3U?list=PL...eT9J26lkefvVkK
don't panic of mobile.
Step 3 :: done ..enjoy u did it
--------------------------------------------------------------------------
If you bricked on nougat then follow the below steps
step one :::
download the downgrade package to mm .
then extract the zip and open the update.app using HuaweiUpdateextrator in that select recovery and extract
1.now, boot your device into fastboot and flash the recovery (Optional)(try this if it said incompatible version on recovery)
2. on your sd card and make a folder "dload" . and copy the update.app which we have extracted earlier
3.the switch off the device and press all three buttons you will be reboot into recovery and done . you device will be okey
Meiton said:
So I've tried that but the phone is still booting to recovery (flashing TWRP logo) no matter what.
Basically the phone is always on now because if hold the power button (or any other combination) for a few second it will just reboot back.
I have an access only to ADB, but I am not able to boot to bootloader at all, it seems the bootloader is damaged somehow.
Also that warning about unlocked OEM doesn't have that text saying "hold volume up to boot to recovery" etc. like before brick.
Click to expand...
Click to collapse
Booting to the bootloader is just a timing issue
Phone must be hooked to PC with USB
And volume up and power till it goes black
Then immediately volume down and power and Hold untill the bootloader loads
Keep trying until you get it
Sent from my Nexus 6P using Tapatalk
clsA said:
Booting to the bootloader is just a timing issue
Phone must be hooked to PC with USB
And volume up and power till it goes black
Then immediately volume down and power and Hold untill the bootloader loads
Keep trying until you get it
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I appreciate your help but I've tried it multiple times always with the same result.
I also can use "adb reboot bootloader", but it will reboot again to stuck recovery.
DJ Daemonix said:
Hi there,
Try using the Huawei Multi Tool with the Unbrick option : https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
Speaking from experience, this little fellow helped me recover my phone when I bricked it ON DAY ONE after failed root attempt... (Derp)
Let me know if it helped you
(Leave a thanks if it did )
EDIT : This tool is also useful if you want to get lazy whilst rooting. I use it constantly when flashing diffrent bits and pieces
Click to expand...
Click to collapse
I've tried that, but I am still stuck as that tool is using fastboot as every other tool to flash .img files.
Thank you for the tip though.
Plug phone into computer with USB, then hold down power + volume down until it eventually boots into bootloader. I had the same scenario as you and that's how I got into the bootloader. You can flash either a good TWRP or the stock recovery, either one will work.