Hey,
I got this android tv box to watch online channels from this company. This company went out of business and now when I try to turn on the box, it gets stuck on attempting to connect. Before they closed I download a firmware update and installed it, it worked fine but then one day it would just hang on this connection after it finished booting. I am not able to do anything except go into settings. I try to click on app list, browser etc and nothing happens. I am guessing it is trying to connect to that online tv provider, and since its gone it just gets stuck. Anything I can do with this box? I thought it was my wifi so I used the Ethernet cable and still.
Here is the box I have viptv.com/viptv-technology
Thanks
Related
I have a 2011 Jeep Grand Chreokee. When I first got the phone, it paired fine and I was able to make and receive calls through the BT. I had this setup for about 1-2 days. I then rooted the phone with the stock ROM only removing bloat ware...now I cannot connect via bluetooth back to the car. It seems to connect then disconnect me right away. Ideas?
I know this seems obvious but have you tried unpairing and repairing the phone to the car? Sometimes bluetooth can get fidgety and most of the time it requires you to repair the device. In my experience that generally solves the issues I have had with bluetooth.
Any time I have factory restored my phone I have had to repair it to any Bluetooth devices it was once connected to. Not sure if the Bluetooth address changes for the phone or not on a reset or ROM change, but it seems to be the case. My Infiniti G37s has Bluetooth and I experienced the same issue as you, pair it again and see if that helps.
Thanks for replies...I tried to repair about 6 different times...same result. It seem that the phone and audio connections both connect for about 2 seconds, then the phone disconnects.
Funny, I wanted to try this but kept forgetting. So I just went down to my garage and tried it, and it paired successfully on the first try. Tried making a call via number/phonebook and it all worked.
I'm rooted running Das BAMF 1.3, and paired it with a '11 Sonata Limited.
So I got it working...but without the phone book downloaded. The issue is in fact when it tries to download the phone book. Need to get another phone loaded up with my contacts and do a sync to get phone book loaded to car.
DieselvRR said:
So I got it working...but without the phone book downloaded. The issue is in fact when it tries to download the phone book. Need to get another phone loaded up with my contacts and do a sync to get phone book loaded to car.
Click to expand...
Click to collapse
Did you do anything to get it working?
When the device asked me to allow connection to download the phone book, I declined, only then would it pair properly.
I think I figured it out, I have the Infiniti G37, when I rooted & re-paired the Bluetooth, somehow I ignored the question when it popped up asking to "allow" or "deny" the connection.
Yesterday during the whole 4G fiasco, I reflashed & had to re do everything this morning, when I paired my BT, it asked me whether to allow & this time I clicked allow & my BT connects & stays connected fine now.
My question is, is there a way to delete the BT pairing on the phone without having to completely wipe the phone with a reflash?
ruddogg said:
I think I figured it out, I have the Infiniti G37, when I rooted & re-paired the Bluetooth, somehow I ignored the question when it popped up asking to "allow" or "deny" the connection.
Yesterday during the whole 4G fiasco, I reflashed & had to re do everything this morning, when I paired my BT, it asked me whether to allow & this time I clicked allow & my BT connects & stays connected fine now.
My question is, is there a way to delete the BT pairing on the phone without having to completely wipe the phone with a reflash?
Click to expand...
Click to collapse
nevermind, I just found the answer
http://support.vzw.com/clc/devices/knowledge_base.html?id=39262
just hold down "paired"
I believe the issue is just with the MyGig radio on the Chrysler products. I have a SRT8 Magnum with the MyGig and allowing it to download the address book "Breaks" the B.T. connection. I don't know what the issue is? Perhaps too much information being sent to the MyGig and it "locks up"?
I also have a Ford Focus for a daily driver and allowing it to download the Address Book over the phone has no such issue.
DieselvRR said:
When the device asked me to allow connection to download the phone book, I declined, only then would it pair properly.
Click to expand...
Click to collapse
It does it on my aftermarket Kenwood double-din unit, too. I've seen it happen on several Ford units too.
usafle said:
I believe the issue is just with the MyGig radio on the Chrysler products. I have a SRT8 Magnum with the MyGig and allowing it to download the address book "Breaks" the B.T. connection. I don't know what the issue is? Perhaps too much information being sent to the MyGig and it "locks up"?
I also have a Ford Focus for a daily driver and allowing it to download the Address Book over the phone has no such issue.
Click to expand...
Click to collapse
I updated my 430N radio with the latest firmware update and phone book downloaded and BT is working without getting disconnected.
Thanks
Thanks for that info. Although I can't do it as I have the "MyGig" retro-fitted into my 07 SRT. So, if I apply the "official update" I will lose GPS time and a bunch of other things.
But, nice to know it works.
DieselvRR said:
I updated my 430N radio with the latest firmware update and phone book downloaded and BT is working without getting disconnected.
Thanks
Click to expand...
Click to collapse
My "smart display" was working fine, but when I tried to update the system, I got the error message that it couldn't connect to the network. WiFi was connected, so I contacted ViewSonic tech support. They said to connect the tablet to my router with an ethernet cable. I connected the ethernet cable and turned the unit on, and now it can't get past the boot screen.
Tech support says I'll have to return it since there's no way to do a factory reset. I'd rather try to fix it myself before doing that, but I don't know where to start since I don't really know what's wrong. The tablet shows up as a mobile device when connected by USB to my PC, but the OMAP driver is missing.
Any suggestions?
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
paniqueado said:
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
Click to expand...
Click to collapse
I believe i read that there is a specific app that you have to run on these to do the mirror link...easy connect, maybe? Did your HU come with an instruction booklet? I was looking through mine earlier and it went over in detail how to setup mirroring through that app.
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
paniqueado said:
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
Click to expand...
Click to collapse
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
JordanB said:
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
Click to expand...
Click to collapse
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
I seem to have USB connection working now with only one "allow USB Debugging?" popup, only when I first connect.
What I did was turn wifi off on the headunit. I am not sure why it worked, but I just wanted to turn everything not needed off, and see if the headunit would stop disconnecting all the time. So far so good. I can probably live with one annoying popup, instead of one every few minutes.
Of course you have to keep the screen on the phone on, and the battery in the phone will deplete faster than the headunit charges it, but still an improvement. I had a 30 minute drive today, and the USB never disconnected!
paniqueado said:
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
Click to expand...
Click to collapse
paniqueado, try the da_anton ROM. I just installed it and easyconnect finally works as it should. I just plug in my phone to the USB and it fires right up! One prompt if any on the head unit, and NO disconnects whatsoever.
Anyone know how to watch Xfinity live TV on an external monitor?
I get the error
"Because of security protocols required by our network partners, you can enjoy this video on your mobile device only"
This is on an RCA 10" Viking Pro with Keyboard.
Android 5.0 and rooted.
I tried HDMI virtual switch with no luck, don't believe it supports 5.0. I also tried modifying the HDMI state file but I get an error when trying to save the file
I know this has to be possible, when my dad was showing me the problem he had it plugged into the keyboard and he unplugged it and all of a sudden the error went away and it worked and started playing live TV on the external screen! We got it to do it one other time but haven't been able to repeat it.
So really just need some way to mirror the display to and external monitor without the device knowing and telling other apps it is I guess
Hi,
I have this Android TV set top box from my internet and cable provider, codenamed dcn88_72604_ln, and I have one crazy issue : It crashes almost every time I use my phone (LG G7+), if both in the same network (WiFi).
I already contacted my provider but their solution is to give me replacement unit, which have the same issue, as this is my 3rd unit in just 5 days. I've tried playing games on my android tablet, browsing on my iPhone, nothing happens. Grab my G7+, open app drawer, suddenly the STB crashes. I have to unplug & plug the power cable and let it boot again.
The only solution is to turn off WiFi on the STB, but of course it lost abilities like controlling smart devices and casting videos. I also have other android TV box (Mi Box 3) but it works perfectly.
Any help would be greatly appreciated, thanks!
Sent from my LM-G710 using Tapatalk