After I just replaced my digitizer and turning my tablet back on I'm having an issue with my Wi-Fi where it keeps dropping in and out. Could I have messed up a wire inside?
MrKite4 said:
After I just replaced my digitizer and turning my tablet back on I'm having an issue with my Wi-Fi where it keeps dropping in and out. Could I have messed up a wire inside?
Click to expand...
Click to collapse
If it didn't happen before and it does now .... I'd say probably
sbdags said:
If it didn't happen before and it does now .... I'd say probably
Click to expand...
Click to collapse
Do you know where the Wi-Fi adapter or whatever it would be called is located inside?
MrKite4 said:
Do you know where the Wi-Fi adapter or whatever it would be called is located inside?
Click to expand...
Click to collapse
No idea - you tube one of the tear down videos.
Related
does anyone know what causes this issue?
Xspidman said:
does anyone know what causes this issue?
Click to expand...
Click to collapse
Probably the screen's connection cable inside the phone is loose or damaged. I'd recommend taking the device to service for repairs.
Ferrit.fi said:
Probably the screen's connection cable inside the phone is loose or damaged. I'd recommend taking the device to service for repairs.
Click to expand...
Click to collapse
ive already replaced it a while ago with the S4, would it be easy for me to check myself?, its a droid bionic 16gb btw
i also tried to flash a rom on and it keeps failing, and even when i try recovery mode to clear cache or any of the other options, it goes to load screen with glitches on picture and freezes there
Hello guys,
After a screen replacement the sound of the down speakers change and become so poor while the hole phone vibrates cause of the bass.
Does anyone knows how to can i fix it ?
joead2010 said:
Hello guys,
After a screen replacement the sound of the down speakers change and become so poor while the hole phone vibrates cause of the bass.
Does anyone knows how to can i fix it ?
Click to expand...
Click to collapse
Make sure the daughterboard is tightened correctly.
Mr.Ak said:
Make sure the daughterboard is tightened correctly.
Click to expand...
Click to collapse
yea it is
joead2010 said:
yea it is
Click to expand...
Click to collapse
I'm pretty sure it ain't.Check again.
Mr.Ak said:
I'm pretty sure it ain't.Check again.
Click to expand...
Click to collapse
they are :'( the only think is that i didnt glue it with the tape
I just get this n8000 second hand, tried original rom, and two more custom ROM, everything works fine(as far as I know). But there are couple area where s pen does not work. I don't use case, or protective film on it.
Please tell me what part should I change to get the full function of s pen back?
Try replacing the tip nib.
khaywong said:
Please tell me what part should I change to get the full function of s pen back?
Click to expand...
Click to collapse
Sometimes its enough to reconnect the flex cable for the wacom digitizer.
It's the flex cable in the upper area.
html6405 said:
Sometimes its enough to reconnect the flex cable for the waxom digitizer.
It's the flex cable in the upper area.
Click to expand...
Click to collapse
Will try it and see. Thank you.
blackhawk said:
Try replacing the tip nib.
Click to expand...
Click to collapse
It's secondhand, therefore no spare nib. Will get one online later.
You could open the testmode (dial *#0*#) and test which area is dead.
html6405 said:
Sometimes its enough to reconnect the flex cable for the wacom digitizer.
It's the flex cable in the upper area.
Click to expand...
Click to collapse
Tried and failed.
html6405 said:
You could open the testmode (dial *#0*#) and test which area is dead.
Click to expand...
Click to collapse
Is like a reversed L shape
khaywong said:
Tried and failed.
Click to expand...
Click to collapse
Then it could be that you would have to replace your digitizer.
html6405 said:
Then it could be that you would have to replace your digitizer.
Click to expand...
Click to collapse
I will try and find one. But this going to take some time.
Not really worth it for such an old product .
Hello everyone. My S6 initially froze with the screen on so I turned it off to restart. Now it doesn't turn on anymore. I've tried various key combinations (Power+VolDown / Power+VolUp+Home) but it won't turn on. I tried to connect the smartphone to the PC but it is not detected. If I connect the charging cable there is no Led status. I have tried with wireless charging and the phone gets hot so that means the charging is working. What can I do? Help please!
Sounds like a mobo failure. Was it dropped or ever exposed to water?
blackhawk said:
Sounds like a mobo failure. Was it dropped or ever exposed to water?
Click to expand...
Click to collapse
Absolutely not. Always used with care. I use it as a router so the battery has been under stress.
Obvious hard brick. No idea why. Samsungs Can not be recovered from hardbricks. All you can do is ship it in.
Cronoblack said:
Absolutely not. Always used with care. I use it as a router so the battery has been under stress.
Click to expand...
Click to collapse
I say a battery failure if the display had gone out on its own. Maybe a battery failure but sounds more like a mobo failure. A loose ribbon cable connector is also a possibility.
It be a brick as it is... exploratory surgery is called for.
Arealhooman said:
Obvious hard brick. No idea why. Samsungs Can not be recovered from hardbricks. All you can do is ship it in.
Click to expand...
Click to collapse
Ship it in where?
blackhawk said:
I say a battery failure if the display had gone out on its own. Maybe a battery failure but sounds more like a mobo failure. A loose ribbon cable connector is also a possibility.
It be a brick as it is... exploratory surgery is called for.
Click to expand...
Click to collapse
I don't think that the problem is the battery... maybe mobo, but why? Seems for no real reason!
Cronoblack said:
I don't think that the problem is the battery... maybe mobo, but why? Seems for no real reason!
Click to expand...
Click to collapse
Solder joints can fracture from physical stress or poor design/application. The SOC's are BGA's and are especially susceptible to this.
That doesn't mean it's the mobo but they do fail occasionally.
So is there a solution or not?
Cronoblack said:
So is there a solution or not?
Click to expand...
Click to collapse
Have the rear cover pulled and see what you got.
Repair time. Right now it is bricked.
Hey Guys n' Gals!
Question, has anybody had their primary screen malfunction?
Now when I fold my phone either open or closed, the screen sometimes goes black. After 1-2sec the screen turns on again.
Sometimes the screen also flashes in a bright yellowish or green color when it is being folded.
Anyone have these symptoms? Any fix? or is it a hardware issue?
Thats is EXACT issue i had, i sent it in repair but they could not fix it... but instead put a diffrent firmware on it or something
FattoYosh said:
Thats is EXACT issue i had, i sent it in repair but they could not fix it... but instead put a diffrent firmware on it or something
Click to expand...
Click to collapse
Woah what?
different firmware? they did not change the screen?
Does your screen now work again with no issues?
BWA80 said:
Hey Guys n' Gals!
Question, has anybody had their primary screen malfunction?
Now when I fold my phone either open or closed, the screen sometimes goes black. After 1-2sec the screen turns on again.
Sometimes the screen also flashes in a bright yellowish or green color when it is being folded.
Anyone have these symptoms? Any fix? or is it a hardware issue?
Click to expand...
Click to collapse
Most likely a hardware problem. Could be a lose connection or something more serious. Did you drop your phone or something before this started?
Take it to warranty asap
TheMystic said:
Most likely a hardware problem. Could be a lose connection or something more serious. Did you drop your phone or something before this start?
Click to expand...
Click to collapse
Nope, I have not dropped the phone. It just started all of a sudden.
BWA80 said:
Nope, I have not dropped the phone. It just started all of a sudden.
Click to expand...
Click to collapse
You'll have to get it checked at a good service centre. Let's hope it is a minor issue.
FattoYosh said:
Thats is EXACT issue i had, i sent it in repair but they could not fix it... but instead put a diffrent firmware on it or something
Click to expand...
Click to collapse
There is no way a firmware would resolve a hardware issue (if it was that)
BWA80 said:
Woah what?
different firmware? they did not change the screen?
Does your screen now work again with no issues?
Click to expand...
Click to collapse
It did fix it, lol i just reflashed it with stock firmware, no issues yet