Database Info

[Q] Is there any true 'anti-slip' case out there?

Hey all,
ive been trying some of the best cases out there for my SGS including PDair, Case-Mate Though, TPU, SGP and some other cheap onens..
(the SGP one actually claims to be an anti slip material but got nothing to support it..)
Some of them have a great design, othere are very protective but non have the feature im realy looking for which is what called 'Anti-Slip'. most of my IPod cases for example had that ability in them. a simple silicone that that helps your device not slip from your hands.
Does anyone knows about any silicone case that have this?
Thanks!

Have you ever tried gel type cases - they feel like rubber and very grippy

k!pps said:
Have you ever tried gel type cases - they feel like rubber and very grippy
Click to expand...
Click to collapse
Thanks for your reply.
I saw it before on some IPhones and didnt like its touch feeling very much. also, i think its too hard to provide a good protection..
btw, please also forgive me for any wrong word selection, english is not my mother lang

Hi there...
Did you already saw this one??
Samsung Galaxy S Commuter Series Case from OTTERBOX
Do a search on Youtube to see review...
I can't post any links yet...

I have one just like this
http://cgi.ebay.com/Samsung-Vibrant-Galaxy-S-I9000-Genuin-Mesh-Case-Red-/320605390228
Surf around and you might find a slightly better deal, but make sure its that same one. It has a very rubbery feel which doesnt slip at ALL, i loved it. Only thing is that it doesnt offer much protection from falls.

the cheapest safest option is to just put some industrial tape around your hand and stick your phone to it
this way your phone will never slip and is always in your hand.... you dont need to waste time searching your pockets ..
but the only downside i have is i have to wipe my rear with my left hand now

apache86 said:
Hey all,
ive been trying some of the best cases out there for my SGS including Case-Mate Though
Click to expand...
Click to collapse
Seriously?! What do you do to have such slippery hands? On second thought, don't answer that
I have a Case-Mate Tough Case and that's not only "rubbery", but also very structured giving a VERY good grip. In fact, I had problems getting it in and out of my pocket, which annoyed me so much I gave it up.
If the Case-Mate Tough wasn't grippy enough, superglue is the only option (or duct tape if you're going for the not-so-permanent option)

Go get some skateboard Grit Tape. Guaranteed non slip...

[Q] What case is better Otterbox Commuter vs. Casemate?

I saw reviews on the Casemate but not the Otterbox Commuter and I was wondering by experience which of the two are better and why?

I never tried the Otterbox but I do have the active Seidio vase and Casemate Tough. The casemate is one solid case. Protection all around and it feels great.

Anyone else have any more thoughts? I was going to post the exact same question until I used the feature to search

joogle said:
Anyone else have any more thoughts?
Click to expand...
Click to collapse
I have the Case Mate "Barely There" and I must say it is exactly what I expected.
Good protection for the phone back, sides & lower part. The upper part (at the power button) is less protected as you can see HERE but for me it will do.
The design is perfect, it fits like a glove; all case openings for camera lens & volume buttons are at the good location, see HERE & HERE!
Also, the cover is very thin (but still plastic so still better protection than rubber) so the design of my precious Sensation isn't ruined by it.
Finally, I'd suggest to use an original HTC screenprotector together with this case. Your phone will last for years that way. I tried an external party screenprotector but that was a waste of money because of the worse fit.
Hope this helped you a bit, as you asked for Otterman comments

I have both of the cases mentioned and i like them both. They both do there job. My only gripes are that with the otter-box case i have to fully disassemble the case to use my desktop dock. I have always been a fan of otter-box and have used there cases since owning my Hd2 and will continue to be partial to them for that reason, just wished there were a kickstand on the commuter series for the sensation when you buy it.

Thanks for the feedback, how are the usb ports on the otterbox and does the flap close well?
Basically between the two you would prefer the otterbox more?
thanks again
snoop101 said:
I have both of the cases mentioned and i like them both. They both do there job. My only gripes are that with the otter-box case i have to fully disassemble the case to use my desktop dock. I have always been a fan of otter-box and have used there cases since owning my Hd2 and will continue to be partial to them for that reason, just wished there were a kickstand on the commuter series for the sensation when you buy it.
Click to expand...
Click to collapse

Case mate tough case is better, otterbox seemed like cap and the silicone surrounding the phone was just bad
Sent from my HTC Sensation using Tapatalk

with my experience with the HTC Sensation Pop! Case is was ok. The silicone warped a little bit on the sides but it was very durable. Be careful when taking the phone out of this case because the silicone popped off the hard part of the case on the top.

are you referring to the case mate or otterbox?
skylinejay88 said:
with my experience with the HTC Sensation Pop! Case is was ok. The silicone warped a little bit on the sides but it was very durable. Be careful when taking the phone out of this case because the silicone popped off the hard part of the case on the top.
Click to expand...
Click to collapse

joogle said:
Thanks for the feedback, how are the usb ports on the otterbox and does the flap close well?
Basically between the two you would prefer the otterbox more?
thanks again
Click to expand...
Click to collapse
the usb ports function well, the flap closes alright a little hard to open and close and i have used case for about four months and the silicone surround is starting to wear a bit but this is because i remove my phone frequently to use with my desktop cradle. I like the design of the otterbox more it is more ergonomic in my book. Here the way i look at it for the money casemate is a just as logical choice as the otterbox. I prefer the otterbox just becasue i like there product and had never used a casemate before. So in my opinion otterbox.

ballistic
try the ballistic case, its awesome, and its cheaper than otterbox, i bought mine off ebay, it has a silicone plus a hard plastic cover on top of it, its very cool

I've got the Casemate Tough on mine. Had it since December, and it's a great case.
Nice and grippy in the hand, but won't stick in your pocket like the silicon ones can.
The only gripes I can have with it are that it's a pain to disassemble to pull the battery or the SD card, and it could do with being in a few different colours.
I always like bright cases on my phones (yellow is a particular fave) because I do a lot of fishing, and it's always easier to see something bright yellow if you drop it or put it down in a hurry!
I'd say it's worth the money.

Leather Backplate or Case

I'm looking for a leather backplate replacement for my Galaxy S4. Really dislike the grimy feel and fingerprints of the stock plate, so I'm thinking a nice leather feel would be great. Don't want any kind of metal or aluminum to possibly interfere with signals. Also prefer it to be quality not cheap PU leather.
Also a leather back cover case may work as long as its not too bulky. I like the Spigen Argos case but don't want any flip front cover.
I've spent a few hours searching this forum, any recommendations?

ChuckWow550 said:
I'm looking for a leather backplate replacement for my Galaxy S4. Really dislike the grimy feel and fingerprints of the stock plate, so I'm thinking a nice leather feel would be great. Don't want any kind of metal or aluminum to possibly interfere with signals. Also prefer it to be quality not cheap PU leather.
Also a leather back cover case may work as long as its not too bulky. I like the Spigen Argos case but don't want any flip front cover.
I've spent a few hours searching this forum, any recommendations?
Click to expand...
Click to collapse
Haven't tried it, but this looks good: http://www.amazon.com/Bear-Motion-Genuine-Buffalo-Leather/dp/B00BRT6FUW/ref=cm_rdp_product
If you end up getting it let us know how it is!

Cool, I went ahead and purchased it. Will report back when I get it in 4-5 days.

ChuckWow550 said:
Cool, I went ahead and purchased it. Will report back when I get it in 4-5 days.
Click to expand...
Click to collapse
Has it come in the mail yet? How does it look/fit? Thanks!

Been using this new Bear Motion leather case for several days now, and so far I'm very happy with it. Upon first glance and feel its pretty flimsy and cheap, and that's because its so thin. But after you put it on it looks and feels fantastic. I wanted a thin leather case that look and feels nice and this is just that. It claims to be buffalo leather and I suppose it really is. Looks like real leather, feels like real leather and even smells like real leather. Someone else's review on it was that the edges or the lip would start the fade or shred. I can see that possible happening as that seems to be the weak point. Hopefully it doesn't happen for me since I always have my phone in my right front pocket by itself.

ChuckWow550 said:
Been using this new Bear Motion leather case for several days now, and so far I'm very happy with it. Upon first glance and feel its pretty flimsy and cheap, and that's because its so thin. But after you put it on it looks and feels fantastic. I wanted a thin leather case that look and feels nice and this is just that. It claims to be buffalo leather and I suppose it really is. Looks like real leather, feels like real leather and even smells like real leather. Someone else's review on it was that the edges or the lip would start the fade or shred. I can see that possible happening as that seems to be the weak point. Hopefully it doesn't happen for me since I always have my phone in my right front pocket by itself.
Click to expand...
Click to collapse
Thanks for the review! How is the fit, is it really snug? If you have had any other cases could you compare the fit on them to this case? Lastly, what color is your S4 and what color case did you get?

nyonya said:
Thanks for the review! How is the fit, is it really snug? If you have had any other cases could you compare the fit on them to this case? Lastly, what color is your S4 and what color case did you get?
Click to expand...
Click to collapse
The fit is really snug, it locks in tight and you don't feel any movement once it snaps in. Its not really a case that you can depend on if you drop your phone a lot, the protection is very minimal.
Doesn't cover the entire corner, and I imagine the phone would still get damaged if it were to drop straight onto the top or bottom of the phone. But its still better than nothing, and the grip is good and I just don't drop my phone period. I only got the case because I needed something, anything to cover up the cheap awful plastic backplate, and this case just makes the phone feel really good in the hand.
The only other case I have for the S4 is the S View cover, more of a stylish case and I just got annoyed with having to open up the cover all the time, which is why I didn't want to get the spigen leather flip cases.
My S4 is the black mist so I got the matching black colored leather, simple and classy. I don't want the leather to get dirty or stained in the brown or the red, and well I just prefer all black phones anyways.

Neo Hybrid Review

Ok so i see several posts involving the Neo Hybrid but none with pictures with the phone in it, at least that i found. So i figured i would post with my thoughts and a few photos.
I personally love the Neo Hybrid case and have been a fan of the design since the first one i bought for my Note II. Its slim, doesn't add much bulk, and gives a bit of protection, though not a lot. It's easy to install and fits the phone perfectly, all the holes seem to line up nice and neat. I am using it with a MIME glass screen protector and it still fits over the edges without issue. Im unsure whether they will release just the frames or not, but if they do it makes changing the look of your case easy and inexpensive.
The only issues i have with the case are that it does make it even harder to get the USB cover open, the protection it adds isn't enough to protect from a decent fall, and the plastic buttons feel loose and rattle a bit.
A couple other things to note are that the case does add a small lip to protect the camera and Spigen did also put a taper in the rubber below the heart rate sensor to allow clearance so you could still use it. That being said, i have larger hands and still have a hard time getting a reading without fussing with the sensor quite a bit.

Thank you for the actual pic and content. The side view makes it look like a iPhone lol.

I just got my case today.
It does add a little bit of bulk to the phone.
Also, for the life of me, I can not get the charging cover off with the case on the phone.
The case looks great though, but I think the above points are going to be a deal killer for me. It's too bad, as I really like how the case looks (I got the red border).
I should be getting a cheap ebay TPU case tomorrow to try out. Hopefully will be slimmer and allow the charging cover to be opened easier.

improve grip without adding bulk?

I really like how the premium materials on the s6 feel but it's likeholding a piece of ice dipped in lube.. crazy slippery. this also makes for very awkward hand positioning if you dare use one hand (which i attempt to do).. this phone is already kinda too-big for me ... also, it's incredibly insecure inside a pocket. if you lie down, it will fall out. if you're wearing something loose like sweat pants and sit down, it will fall out..
i'm looking for a solution to improve grip but i HATE cases .. especially on a phone this big. something like a skin/wrap seemsperfect but I'd like to know how much grip these add. Ideally, I feel like 2 thin strips of a grippy vinyl along the edges would be enough but more realistically, a full back wrap would likely be the way to go.
dbrand and slickwraps seem to be the most popular ones. i like the look of the leather wraps but it seems like they feel more like paper in person (based on youtube reviews). I wish someone made a clear full-back cover made out of a gripper plastic (like old school palm pilot screen protectors).. that would likely work.
anyone have experience/recommendations?

The InvisibleShield HDX by Zagg works really nicely for the S6.
I've got to say, though. Nothing could be more slippery than the HTC One M8. Awesome phone, but very slick.

The official Samsung shell case adds some grip while still retaining the look of the phone. It's lightly textured hard plastic.

I remember seeing a post a long time ago where someone sprayed Plasti-dip on the back of their phone. I'm sure that would definitely add grip, and it is reversible. Not sure it's something I'd want to do, but it is an option.
Just did a quick search :
http://lifehacker.com/5716776/diy-rubberized-phone-backing
P.s.- you can get Plasti-dip in multiple colors, including clear.

I am really loving The neo hybrid by spigen.

Probably a bit thicker than a skin, but still minimalist, try the Spigen thin fit BLACK color. The other colors (maybe there aren't other colors for the S6?) are slippery. The black one has a very nice grip, but still easy to take out of pockets. Also, it protects the camera lens .

I have the Samsung shell case, seriously its like having no case on the phone but does add grip
http://pages.ebay.com/link/?nav=item.view&id=121605073646&alt=web
Comes in other colours.

a suggestion
You might want to look at the Tech21 Evo Check at Best Buy. It adds very little bulk to the phone, but a whole lot of grip. I'm waiting for an Urban Armor Gear Outland to be delivered , and although the Tech21 case is not cheap, it gives me peace of mind until the UAG arrives.

I got a spigen clear flexible skin on ebay for around 12 dollars. Very nice slim and adds a lot of grip and still lets the phone shine thru

I got dbrand leather carbon finer skin for the back. It's less slippery to hold and no bulk added.

there is really not a solution for you.
Just get a SUPER thin case

I always found adding a cheap clear skin protector on the back add just the amount of grip you need. Worked for the Sony Z3 as well as htc one M7/M8 from my personal experience.

You could wrap your phone once around with Saran Wrap. Might look a little funky, but it will give you some more grip.

if you don't want a case but want grip and never drop your phone then checkout the flygrip it uses double sided adhesive to attach to your phone and also works as a kickstand in potrait and landscape mode , been using it for years on all my devices , but if you wireless charge then it will get in the way and wont work

I bought a pure gear case. Very slim with rubber siding and clear!! I've used them on several phones. Great feel and low bulk. I also added a screen protector
Sent from my iPad using Tapatalk

I know these are expensive but they seem to be a great quality and are truly the thinnest case I have ever seen. You should be able to try them out at your local Best Buy to see if you like it.
http://www.evutec.com/category-s/1904.htm

polo79 said:
I know these are expensive but they seem to be a great quality and are truly the thinnest case I have ever seen. You should be able to try them out at your local Best Buy to see if you like it.
http://www.evutec.com/category-s/1904.htm
Click to expand...
Click to collapse
Love those descriptions hahaha japanese warriors wore what these cases are made of... hahaha . It's really just plastic, guys, come on.

jadaress1 said:
I have the Samsung shell case, seriously its like having no case on the phone but does add grip
http://pages.ebay.com/link/?nav=item.view&id=121605073646&alt=web
Comes in other colours.
Click to expand...
Click to collapse
hello dont agree, i think its a very well made case, if the case drop, it will hurt one of the corner and will preserve the metal part,try to put the phone on a table in all position you want, the lens and metal part will never in contact with anything (sorry for my english