Hello everyone,
I am having an issue after trying to update my Cyanogen mod 11 ROM. I had a nightly installed before working perfect and I just wanted to update it to the latest one.
I have CWM v6.0.4.7 running just fine.
What I ended up doing before updating CM is formatting /system, /cache, /data, /staging and /boot.
After doing all of that I tried to install a newer version of CM11 and the install completes successfully but after I reboot the device I get to the rotating Cyanogenmod logo and it just stays there rotating without actually booting into the OS.
I have already tried installing the older version of CM11 again with no avail.
I have also tried to install stock Asus firmware from there website and all SKU's produce the install aborted error at time of installation through CWM.
Can someone shine some light on what is going on here please. I know I probably messed it up by reformatting all that stuff I shouldn't have but at this point I just want a working device again.
Thanks to all in advance.
-Moon
Related
Hi everyone!
I have an HTC Desire S, unlocked with HTCDev, s-on, hboot 2.00.002, and ext4 recovery.
I've successfully flashed MIUI, which is working fine, but when trying to update it with last week's release, it gets stuck on the boot screen (MIUI animation / logo). I've also tried flashing other new roms, as well as the JB version of MIUI, and all of them seem to get stuck at the same point after installation (older versions of MIUI used to update normally).
I've tried updating my recovery through the ext4 recovery updater, which says "new recovery flashed successfully!", but when I restart the phone, the recovery is still the old version that was installed before.
Does anyone know what the problem here might be?
Thanks in advance!
-Max
I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?
Sounds like you flashed the wrong recovery, possible that you installed the p3100 recovery.
Try reflashing the recovery.
miksol said:
I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?
Click to expand...
Click to collapse
Flashing KK ROMs on outdated recovery will get you a status 7 error. Grab the latest (I'd go with TWRP as CWM support will be ending soon) version from here...http://forum.xda-developers.com/showthread.php?t=2548257 update to the latest one you like (CWM is 6.0.5.0) Load up a ROM and give it a go. I put all my ROMs on an external card to be safe. Maybe do that and then just install from such.
p,s. CM installer never works, I dont think our tabs are compatible with it. At least I've never got it to work.But, you dont need it anyways.
Hey guys, I Know this phone is old but please help me
I was using official 2.3.5 ROM and it was getting old so I thought to root and install an ICS Rom so i rooted and installed MIUi ICS ROM (http://forum.xda-developers.com/showthread.php?t=2029969) it was really nice and i thought to install Aurora Rom(http://forum.xda-developers.com/showthread.php?t=1492957) and it was Awsome! so i got into installing new ROMs and i was installing new ROMs almost every week and one day i saw CM 11 KitKat ROM for Huawei U8800 and I wanted to install it but before that i had to install Ble-Part Partition (http://forum.xda-developers.com/showthread.php?t=2615712) i flashed it succesfully and i installed the 2.2 version after that i flashed CWM 6.0.4.6 and i installed KitKat CM11 without any problems!
After some time using it for some time i thought to go back to Aurora as CM 11 was a little buggy and Aurora was the most stable ROM but as i was installing Aurora, i accidently formatted Boot instead of formatting System and without realizing it i flashe Aurora which flashed very quickly rather unexpectedely, and when i rebooted a blue screen appeared. I (surprised) installed official 2.3.5 ROM via dload and when it had installed the phone went into bootloop and i performed a factory data reset and it booted normally. But when i rebooted the phone again again it went to bootloop again. So i installed official 2.2 ROM and it installed succesfully and it never bootlooped in 2.2 ROM. But i wanted to install Aurora but it needs a .35 kernel and whenever i install 2.3.5 it keeps on bootlooping and i cant root it, though i can root 2.2 ROM easily and install .32 ROMs but they are quite old and I want to install ICS, JellyBean or KitKat Rom, which unfortunately i cant
Just in case you would be wondering i have tried many methods to go back to stock partition and none of them works and i have 1.8 GB storage! I have read that distorted partition can cause bootloops on 2.3.5 ROM so if anyone can help me to fix this problem, ill be very grateful as this is a very important phone to me!
And if you have any questions please ask!
So i recently got a g2 from tmobile store. I went ahead and updated to lollipop, rooted and installed newest twrp via autorec. This is my first LG device but i figured out yhe different bootstacks to go along with certain roms. I am able to install roms, back them up and restore just fine with full knowledge of proper methods ( wiping and such) except cyanogenmod. Ive tried cm10,11, and 12. Every try i get an error similar to Error "executing update binary in zip failed". I dont know what im doing wrong. I tried going back to an older twrp but couldn't get it to install either. Help
So I've had a chinese version of the opo since last summer, first thing I did was root it and unlock bootloader etc. I've been running a rom for quite a while (really embarrassing, but can't remember what rom). And I tried to flash a new one, but I got greeted with the message "error executing updater binary in zip". I've tried most things, updating firmware, updating to latest recovery, wiped everything, then trying to install, then rebooting and trying again, but no luck. Running CM12 nightlies work, so does oxygenos, however they're not that good tbh. Would love any help
Roxkyp said:
So I've had a chinese version of the opo since last summer, first thing I did was root it and unlock bootloader etc. I've been running a rom for quite a while (really embarrassing, but can't remember what rom). And I tried to flash a new one, but I got greeted with the message "error executing updater binary in zip". I've tried most things, updating firmware, updating to latest recovery, wiped everything, then trying to install, then rebooting and trying again, but no luck. Running CM12 nightlies work, so does oxygenos, however they're not that good tbh. Would love any help
Click to expand...
Click to collapse
Flash latest CM12.1 nightly first
And then flash your desired ROM
Or else
Flash factory images of latest version Cyanogen OS 12.1 and then flash TWRP and then your desired ROM
Guide to flash ROMs and factory images >> http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
Mr hOaX said:
Flash latest CM12.1 nightly first
And then flash your desired ROM
Or else
Flash factory images of latest version Cyanogen OS 12.1 and then flash TWRP and then your desired ROM
Guide to flash ROMs and factory images >> http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
Click to expand...
Click to collapse
Unfortunately these methods did not work for me, I can get on 12.1, but when I want to flash something else (resurection rom in this case) I get the error.
Its a firmware issue you need the correct firmware