Database Info

Moto G 3rd gen. not bootable

Hey Mates!
I've been looking for a solution but cant find any helpful advices.
I have rooted my Motorola G; 2 days ago, no problem. As soon as I rebooted it, it wont boot.
these are the errors that occur when I try to boot it
-hab check failed for boot
-failed to verify hab image boot
-failed to validate boot image
Fastboot Reason: Fall-through from normal boot mode
When I try to go to recovery, it says "no command".
It also says that my device is locked.
Meanwhile I've connected it with my PC and I tried to run the desktop version, but no changes so far.
I'd really need your help

Have you tried to reflash the stock kernel?
Sent from my MotoG3 using Tapatalk

ExaHamza said:
Have you tried to reflash the stock kernel?
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
No I did not. Do you recommend it?
This "how to" is for Samsung Galaxy, I know, but I guess it would be a similiar way to reflash the stock kernel of the Moto G?
Thanks in advance.

Vairo said:
No I did not. Do you recommend it?
This "how to" is for Samsung Galaxy, I know, but I guess it would be a similiar way to reflash the stock kernel of the Moto G?
Thanks in advance.
Click to expand...
Click to collapse
How do you rooted?
Sent from my MotoG3 using Tapatalk

It seems like the link between your pc and phone was lost during data transfer. Ensure to have the link between the mobile and pc secured. Try replacing the drivers and the usb cable with a good quality one. Loose connections can also cause this type of problem. Something similar happened to me too...
After above flash factory firmware to revive your device first. You can root it subsequently.
You can get all the information in the forum under the Factory Firmware thread. Be careful to download the firmware compatible for your mobile model only.

ExaHamza said:
How do you rooted?
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
I did root it with RootKing.

arunhebbare said:
It seems like the link between your pc and phone was lost during data transfer. Ensure to have the link between the mobile and pc secured. Try replacing the drivers and the usb cable with a good quality one. Loose connections can also cause this type of problem. Something similar happened to me too...
After above flash factory firmware to revive your device first. You can root it subsequently.
You can get all the information in the forum under the Factory Firmware thread. Be careful to download the firmware compatible for your mobile model only.
Click to expand...
Click to collapse
When I rooted my phone I never connected it with my Moto G; after I couldnt boot it, I tried if it would work somehow. I rooted my device with RootKing which was an app on my device.

Vairo said:
When I rooted my phone I never connected it with my Moto G; after I couldnt boot it, I tried if it would work somehow. I rooted my device with RootKing which was an app on my device.
Click to expand...
Click to collapse
It is not clear if your phone's bootloader has been unlocked or not. Rooting apps have been known to create issues with Moto G3. I tried to root my phone (which has its bootloader unlocked) with the Kingroot app. Although I could succeed and boot the device, the signals vanished. Hence I adapted the traditional way of rooting using the fastboot mode.
If you have still issues of not being able to boot your phone, then please flash stock firmware available in Factory Firmware thread of this forum (you can flash even though your bootloader is unlocked) as per details given there in. You can root your phone later. If you have an unlocked bootloader, there are other posts to guide you how to ulock the bootloader first. Please note you cannot modify software if your bootloader is locked.

Stuck at Powered by Android please help SM-N915G

My Fried gave this phone to me (SM-N915G) which is stuck at Powered by Android, and told me to fix it.
He said that when he update to MM from LP without KIES or Odin, the phone suddenly restarted and stuck there getting HOT
He had no experiece to repair it so he asked me to fix it.
So for 3 days lately, i have tried many ways to fix it but wihout any progress, as follow :
1. Flashing Official MM wby using Odin -> still stuck
2. Downgrading Flash Official LP using Odin -> still stuck
3. Installed TWRP, and flasing CFW Micky387_MM_V3.0 for 915F/FY/G (flashing Bootloader and modem as required) -> still stuck with set warranty bit : kernel
4. After Flashing Micky CFW and Failde, i try to flash Emotion Kernel -> still stuck with Kernel is Seandroid Enforcing
5. Redoing Flash Micky CFW with other CSC -> Still Stuck (even i tried with 915F and 915FY as in the aroma installer)
6. Never failed during flash procedure with Odin or TWRP, everything is smooth
7. When stuck, the device is getting Hot slowly but and when left as long as 15 minutes, the HH is getting HOT (TWRP read 72 degree at most)
**Update
8. Tried using Official SmartSwitch sucessfully but the result is still the same -> Still Stuck and getting hot as usual T.T
Last Download Mode status is :
Odin Mode (High Speed)
Product name: SM-N915G
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox warranty void: 0x1 (2)
Quallcomm secureboot : Enable (CSB)
RP SWREV: S1, T1, R1, A1, P1
Secure Download: Enable
UDC START
I am now thinking, should i flash another Kernel or PIT or Bootloader? but i still cant decide what to do next to revive this Phone
Please help, any suggestion is greatly appreciated, thank you.

Please give some help, thank you.

Help Please anyone?
This is Hard Brick or Soft Brick?
Any suggestion or Opinion please
Thank you

wingz17 said:
Help Please anyone?
This is Hard Brick or Soft Brick?
Any suggestion or Opinion please
Thank you
Click to expand...
Click to collapse
Have you tried a reinstall using KIES?

The Radius Kid said:
Have you tried a reinstall using KIES?
Click to expand...
Click to collapse
Yes i have try to recover but not using KIES, but using smartswitch...
Is it diffrent by using KIES or SmartSwitch?
Thank you.

wingz17 said:
Yes i have try to recover but not using KIES, but using smartswitch...
Is it diffrent by using KIES or SmartSwitch?
Thank you.
Click to expand...
Click to collapse
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.

The Radius Kid said:
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
Click to expand...
Click to collapse
Thank you for the suggestion,
I will try that one out and let you know.

wingz17 said:
Thank you for the suggestion,
I will try that one out and let you know.
Click to expand...
Click to collapse
The Radius Kid said:
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
Click to expand...
Click to collapse
Sorry For the long response, i have tried flasing using KIES but still stuck on the android, and no progress.
Right now i am run out of option, please help, thank you.

wingz17 said:
Sorry For the long response, i have tried flasing using KIES but still stuck on the android, and no progress.
Right now i am run out of option, please help, thank you.
Click to expand...
Click to collapse
I'm going to guess that you've tried installing MM using Kies directly from Sammobile?
If so,have you tried turning off your computer's antivirus when you download/install?
It sounds like the bootloader is looking for something and can't find it.....kind of like what happened to me when I totally ripped KNOX out of my phone.
Restore time!
Good thing I did CWM backups.
In your case,your computer's anti virus could be seeing something in the download and ripping it out.
I've seen my browsers do that when I download stuff....pain in the....
Have you tried a different battery?
Maybe a search of the forums to see if anyone else has had this problem and solved it?
I kind of remember seeing something like this a while back.

The Radius Kid said:
I'm going to guess that you've tried installing MM using Kies directly from Sammobile?
If so,have you tried turning off your computer's antivirus when you download/install?
It sounds like the bootloader is looking for something and can't find it.....kind of like what happened to me when I totally ripped KNOX out of my phone.
Restore time!
Good thing I did CWM backups.
In your case,your computer's anti virus could be seeing something in the download and ripping it out.
I've seen my browsers do that when I download stuff....pain in the....
Have you tried a different battery?
Maybe a search of the forums to see if anyone else has had this problem and solved it?
I kind of remember seeing something like this a while back.
Click to expand...
Click to collapse
Thank you for the response,
I was using KIES 2.64 that downloaded from Samsung website to fix the phone as your suggestion (tools->firmware upgrade and initialisation) but still fail to fix it.
Nope, the antivirus still active when KIES download the FW and Flash it into the phone, but it is new to me that antivirus will intercept ongoing dowloaded files, if so i think the antivirus will give some notification or warning about the content of the file that being downloaded and in my case, my antivirus is still cool and no notification whatsoever.
The bad thing is i do not have any cwm backup and since this is my friend phone and not mine, well... we dont have any backup for this phone.
Regarding the battery, i admit that i havent try other battery, since i dont see any connecton between it, in my opinion, the phone works well, the charging animation working, and no sign of weak battery... but i will try to do it if i can get some other battery
I have surfed many forums and websites, but almost 90% can be fixed with simple flashing from odin or just by clearing up cache and data from recovery.
Other that that, wither, no one respond to the problem, or just some discussion without conclusion, really frustrating.
I even go further to read about android booting sequence to identify whats wrong with the boot sequence, but still confused...
But i have some question if you would to answer :
1 . Stuck at Android logo, bootloader or kernel problem?
2 . Is it possible that one of the mainboard chip that have some part in booting process is malfunctioning? But if so, the phone will be dead bricked right?
3. How about the booting process is halted due some hardware failure? ex : some chip (other than chip that have part in booting process) is bad and so the bootloader init is halted
4. The Worst guess, is it possible that the phone is fake? (the serial number behind the baterry is accepted by kies though)
Thank you very much, you are the only one who still response to my problem. :good:

As it seems you use the wrong Bootlaoder. Is his phone N915P or N915G? When you flash N915G Bootloader to N915P, it will not boot but the bootloader will work correctly. Try to flash the N915P bootloader.
I have N915FY phone but did not know first if I had N915F or FY. I flashed the N915F bootloader version, which flashed successfully, but was not booting. Bootloader said that my phones model is N915F. After flashing the FY Bootloader version, it successfully booted to system.

Bordo_Bereli51 said:
As it seems you use the wrong Bootlaoder. Is his phone N915P or N915G? When you flash N915G Bootloader to N915P, it will not boot but the bootloader will work correctly. Try to flash the N915P bootloader.
I have N915FY phone but did not know first if I had N915F or FY. I flashed the N915F bootloader version, which flashed successfully, but was not booting. Bootloader said that my phones model is N915F. After flashing the FY Bootloader version, it successfully booted to system.
Click to expand...
Click to collapse
Thank you for the Response,
First, his phone is N915G (according to the box and the information in the battery compartment)
(Really sorry for the mistake i made at the thread title)
And regarding bootloader, that is also my concern at first, i think maybe i was flasing wrong region and bootloader, and so i search the way to find out the real version of the phone, but after trying many ways described on the net (by imei or serial number) , i still cannot found out the way.
But one instance when i try using KIES, and KIES asked for the version and serial number when device upgrade and initialisation, i entered the exact version and serial number that is found behind the phone in battery compartment. KIES immediately confirms that the version and serial number is valid, (i still wonder though, is KIES check it online at Samsung server or there are some serial number database embedded in the KIES) and continue to run trough the official fw download and installation by KIES but at the end still no success.
Is it possible that the version and serial number is wrong ? if so, how to determine the correct one?
and is it safe to try flasing another bootloader?
Thank you very much

Hello, there is no bootloader related to serial number or something. There are different bootloaders for different models and android version. When you flash MM-Version, you need to be sure that you use the right bootloader and baseband files for MM. If you flash different region-locked firmware/bootloader, it will not affect btw. not solve the boot-stuck problem.
http://samsung-updates.com/device/?id=SM-N915G Try to flash 6.0.1 firmware that is related to your region if you still want to try to flash different region-firmware.
Maybe download the XSA 6.0.1 Firmware with the pit file XSA http://gsm-firmware.com/index.php?a=browse&b=file-info&id=15892.
Then flash XSA 6.0.1 and TBLTE_SEA_XSA.pit together in odin. Under Odin 3 V3.12 ticke the re-partition at option-tab and select TBLTE_SEA_XSA.pit under pit-tab.

Bordo_Bereli51 said:
Hello, there is no bootloader related to serial number or something. There are different bootloaders for different models and android version. When you flash MM-Version, you need to be sure that you use the right bootloader and baseband files for MM. If you flash different region-locked firmware/bootloader, it will not affect btw. not solve the boot-stuck problem.
http://samsung-updates.com/device/?id=SM-N915G Try to flash 6.0.1 firmware that is related to your region if you still want to try to flash different region-firmware.
Maybe download the XSA 6.0.1 Firmware with the pit file XSA http://gsm-firmware.com/index.php?a=browse&b=file-info&id=15892.
Then flash XSA 6.0.1 and TBLTE_SEA_XSA.pit together in odin. Under Odin 3 V3.12 ticke the re-partition at option-tab and select TBLTE_SEA_XSA.pit under pit-tab.
Click to expand...
Click to collapse
Thanks for the reply!
Although there is no bootloader related to serial number, but if we put the serial number in KIES, it will identify what CSC and region, which can be use as a guide to choose the correct FW or let KIES do the Flashing according to the inputted serial number, and as long as the serial number is correct one, that is my opinion but please CMIIW.
When flashing MM, if i use the MM that has been downloaded, the bootloader and baseband is included in the MM image right? or shouuld i flash it separately?
i have tried your suggestion but with no sucess, i have dowloaded the PIT and the FW, flash it trough odin which was sucess, but still stuck.
I do not tick auto restart at Odin, so i manually restart the phone, but i encounter an event which at 20% installing system update (below the greed droid guy) the progress bar is vanished and replaced with erasing, and after that the phone stuck again at the same spot.
Do you have any idea why?
Thank you very much.

Just thinking, should i erase the NAND in ODIN?
If so, how to restore it?
I think that if i backup the NAND using custom recovery and restore it later, it just bring back the same problem, if the NAND causing all this.
Do anyone have some NAND backup that i could use? or any other suggestion?
Thank you

Can you boot to recovery? if yes, try to wipe data and cache.
If it still not working, try to backup your efs with a custom recovery (ex. TWRP), or better the entire System like data, system, boot, efs, modem and save it to your computer.
After saving the backup, try to flash the firmware with pit file while checked NAND erase all.
When its finished and your device boots up, you can flash back your custom recovery and recover only the efs-partition.
If its not working, then there is maybe problems with your eMMC. But be aware using nand erase all. It is the last riskfully option left after trying several things.
I have a backup of my resurrection rom. If you want it I can upload it.

Sharp A1 / Z2 / FS8002

Dear Friends,
I've recently bought the Sharp A1 (LeEco Inside) and everything was running smooth until it feel on the ground.
The front screen is brooken!
I look everywhere for a replacement...even with SHARP tawain but no luck. No even in Aliexpress or ebay....I don't find parts for this phone anywhere.
Can someone provide some help?
Thanks in advance,
Sergio

Look ebay. Contact your local dealers and shops
Sent from my SHV-E210S using Tapatalk

[email protected] said:
Look ebay. Contact your local dealers and shops
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
I have done all off that....
No luck at all.
It's quite strange the lack of parts for this phone. I'm guessing that "Sharp" only gave the brand...but the hardware is from someone else.
I've already found out that the phone has the following names:
-Sharp A1
-Sharp Z2
-Sharp Aquos Z2
or even
FS8002.
Neverthless....i don't find lcd/digitizer/screen for it.
Thanks!

sasimoes said:
I have done all off that....
No luck at all.
It's quite strange the lack of parts for this phone. I'm guessing that "Sharp" only gave the brand...but the hardware is from someone else.
I've already found out that the phone has the following names:
-Sharp A1
-Sharp Z2
-Sharp Aquos Z2
or even
FS8002.
Neverthless....i don't find lcd/digitizer/screen for it.
Thanks!
Click to expand...
Click to collapse
Contact your phone manufacture
Sent from my SHV-E210S using Tapatalk

[email protected] said:
Contact your phone manufacture
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
I already have.
i've contacted "Commtiva Technology, Limited", the owners of Sharp and the makers of this model of phone in taiwan. And they answered...please contact SHARP Portugal (where I live).
Sharp in Portugal, kindly answered...."Sorry, we can't help, because we don't sell Sharp smartphones...only printers, and copiers...bla bla bla".

any help with an original sharp a1 firmware,or another firmware that can be installed on it?? i have same phone for 5 months and it begins to freeze from time to time for about 1 second,reseted to factory and worked fine for 2 days,then during the call i was hearing the sound of notification as i received messages,but no message arrived.reset again,all ok for a day,then freeze again. reset and ok for 3 days, and now i hear the same notification sounds, for couple of times during on a call. i want to put another android version if i can. now i have on it 6.0. i've tried to root it with all programs,not a chance. pls help. thx

Stock Firmware Download
Costi21 said:
any help with an original sharp a1 firmware,or another firmware that can be installed on it?? i have same phone for 5 months and it begins to freeze from time to time for about 1 second,reseted to factory and worked fine for 2 days,then during the call i was hearing the sound of notification as i received messages,but no message arrived.reset again,all ok for a day,then freeze again. reset and ok for 3 days, and now i hear the same notification sounds, for couple of times during on a call. i want to put another android version if i can. now i have on it 6.0. i've tried to root it with all programs,not a chance. pls help. thx
Click to expand...
Click to collapse
Checkout Sharp Mobile Taiwan...w.sharpmobile.com.tw/服務支援-z2

How to Root Sharp Z2?
How to Root Sharp Z2?
I have been search in google but nothing result.

ghopretz57 said:
How to Root Sharp Z2?
I have been search in google but nothing result.
Click to expand...
Click to collapse
Fastboot oem unlock and try flashing this https://drive.google.com/file/d/1XZdnNxF47kWY255igXlebuVIE9k26NpJ/view
msg me if it works and I will link you to Magisk that works for this model and the safetynet fix.

morgs640 said:
Fastboot oem unlock and try flashing this https://drive.google.com/file/d/1XZdnNxF47kWY255igXlebuVIE9k26NpJ/view
msg me if it works and I will link you to Magisk that works for this model and the safetynet fix.
Click to expand...
Click to collapse
not work...

ghopretz57 said:
not work...
Click to expand...
Click to collapse
WHats the problem?

morgs640 said:
WHats the problem?
Click to expand...
Click to collapse
I have been flash that twrp, but when i boot to recovery, it is still stock recovery.

ghopretz57 said:
I have been flash that twrp, but when i boot to recovery, it is still stock recovery.
Click to expand...
Click to collapse
Is your bootloader unlocked?

morgs640 said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
Yes

ghopretz57 said:
Yes
Click to expand...
Click to collapse
When flashing recovery can u send me a screenshot of the cmd prompt after flashing? Or what does it say after flashing?

morgs640 said:
When flashing recovery can u send me a screenshot of the cmd prompt after flashing? Or what does it say after flashing?
Click to expand...
Click to collapse
The messages is:
Transfering OK
Writing OK
But when i boot to recovery, it is still stock recovery, not twrp.

Unbrick my phone?
OMG !
I own a sharp (fs8002) and playing around with it i was trying to root it, unlock the BL and install twrp so i can finally install a custom rom.
With not much info about this low supported phone, i used SP FlashTool and managed to erase everything from it. It is not responsive at all, i don`t see fastboot anymore , no revocery no nothing. SP Flashtool identify the device once plugged as mediatek usb port (com9) but i can not find anywhere the necessary files to UNBRICK it so to make it usable once again!
Is there someone who can help me revive and use this two months old phone ?

Sharp FS8002 stock rom
zeronavigator said:
OMG !
I own a sharp (fs8002) and playing around with it i was trying to root it, unlock the BL and install twrp so i can finally install a custom rom.
With not much info about this low supported phone, i used SP FlashTool and managed to erase everything from it. It is not responsive at all, i don`t see fastboot anymore , no revocery no nothing. SP Flashtool identify the device once plugged as mediatek usb port (com9) but i can not find anywhere the necessary files to UNBRICK it so to make it usable once again!
Is there someone who can help me revive and use this two months old phone ?
Click to expand...
Click to collapse
The stock rom at the Taiwan website (see my earlier post!) is an update-package. It contains a scatter-file that is not suitable for the flashtool...maybe someone can help with that. My guess is that it just does not have the proper format for flashtool. So someone should check that. The firmware seems to be complete, it's 2.1 Gigabyte. I applied the package via update from SD, it works:
Kernel-Version: 3.18.22+ Mon Sep 5 22:19:47 CST 2016
Build Number: NEXCNFN5801509051S release-keys

swrisch said:
The stock rom at the Taiwan website (see my earlier post!) is an update-package. It contains a scatter-file that is not suitable for the flashtool...maybe someone can help with that. My guess is that it just does not have the proper format for flashtool. So someone should check that. The firmware seems to be complete, it's 2.1 Gigabyte. I applied the package via update from SD, it works:
Kernel-Version: 3.18.22+ Mon Sep 5 22:19:47 CST 2016
Build Number: NEXCNFN5801509051S release-keys
Click to expand...
Click to collapse
I managed to download the update firmware file from taiwan website (TSP-1360-0-00WW-A03-update.zip) witch is a 1.92 gb file , but as you said the scatter file contained there is not recognized by SP Flash tool.
Is there a way to make a scatter file for fs8002 with a MT6797 chipset so i can proceed with the flashing ?

Sharp a1/z2 (fs8002) Stock rom via SPFlashTool
I am desperate.. Is there someone on this forum with this smartphone that can create a backup or has access and knowledge to Flash it with SPFlashtool ?
I managed to unlock bootloader, flashed a wrong recovery image and accidentally formatted bootloader and everything. The phone is not responding and i am unable to find anywhere the stock rom to flash it via SP Flash tool
I dont know what else to do..
HELP :crying:

Mate 9 Bootloop stuck at recovery

Hello I upgraded few days ago from P9 plus to Mate 9 and stupid me that i followed the same P9 plus method to install oreo on the mate 9
I installed huawei firmware finder and download oreo from it which automatically installed and after that its stuck at erecovery and asking to download new recovery when i try it it fails then only other options are to reboot and shutdown anyone know any way out of it

awais_666 said:
Hello I just upgraded from P9 plus to Mate 9 and stupid me that i followed the same P9 plus method to install oreo on the mate 9
I installed huawei firmware finder and download oreo from it which automatically installed and after that its stuck at erecovery and asking to download new recovery when i try it it fails then only other options are to reboot and shutdown anyone know any way out of it
Click to expand...
Click to collapse
me too, and I tried the hisuite to recovery, it show up "not support this model", is there anyone can help?

odeeew said:
me too, and I tried the hisuite to recovery, it show up "not support this model", is there anyone can help?
Click to expand...
Click to collapse
lets see i checked other threads here seems like not much help available on it it is stuck at huawei erecovery

It is going to get hard bricked,my did when battery drained. Now nothing cant charge,pc doesn't recognise it,cant boot it. Sent it to service centre bcs it is under warranty i lied to them i told them it shut down during playing a game. I didn't hear from them yet.

I have also the same issue... phone stuck at eRecovery...Please need some assistance here

Szilard666 said:
It is going to get hard bricked,my did when battery drained. Now nothing cant charge,pc doesn't recognise it,cant boot it. Sent it to service centre bcs it is under warranty i lied to them i told them it shut down during playing a game. I didn't hear from them yet.
Click to expand...
Click to collapse
its weird there own software gave the update and performed the update i wish i just had followed xda in advance to see how to do it lets see if any developer could help

please tell me u got a solution for this

Waleedaligomaa said:
please tell me u got a solution for this
Click to expand...
Click to collapse
nop no solution yet still its not working i found a HWOTA method which isnt hard but problem is my bootloader is locked i can go to fastboot and erecovery but as bootloader is locked i cant progress in any of the steps i even have the unlock code also tryed the dc unlocker which is useless too as it only gives you unlock code and doesnt unlock you there was oeminfo method too but all methods need permission to write something through adb which i dont have but i wont give up

i have the exact problem have been searching here nd there but useless so far / i will keep u updated if i found a solutin

Waleedaligomaa said:
i have the exact problem have been searching here nd there but useless so far / i will keep u updated if i found a solutin
Click to expand...
Click to collapse
thanks mate i hope some developer might be able to find some solution

If you can enter fastboot you should be able to unlock bootloader. Just download HWOTA and necessary files and rename them properly. Put them on an SD card and let HWOTA prompt u for bootloader key.

crusht said:
If you can enter fastboot you should be able to unlock bootloader. Just download HWOTA and necessary files and rename them properly. Put them on an SD card and let HWOTA prompt u for bootloader key.
Click to expand...
Click to collapse
yes i tryed the same directions but the problem is there is no oem unlock permission given from software so HWOTA cant write any file on the system

yes exactly fastboot is totally useless because there is no oem unlock permission
i think our only way out is dload update .... placing update.app on internal storage is the problem here
is there anyway to push file into internal through fastboot ? ?
i tried placing update.app on sd card but no use .. i think it must be on internal storage

Waleedaligomaa said:
yes exactly fastboot is totally useless because there is no oem unlock permission
i think our only way out is dload update .... placing update.app on internal storage is the problem here
is there anyway to push file into internal through fastboot ? ?
i tried placing update.app on sd card but no use .. i think it must be on internal storage
Click to expand...
Click to collapse
its actual method is also to keep update.app in sd card so it wont work through internal storage also so still no hope i tryed the sd card method it doesnt work because recovery has been replaced and partitions are disturbed as well

i dont understand
why it want work through internal storage ?

Waleedaligomaa said:
i dont understand
why it want work through internal storage ?
Click to expand...
Click to collapse
because dload method is suppose to be done from external sd card and second thing is our recovery has been damaged which flashes the firmware right now try everything and see what works one guy has given method of changing dns etc

Waleedaligomaa said:
i dont understand
why it want work through internal storage ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
this method might work but i cant find the oem info file for my phone my model is MHA-L09C342

https://forum.xda-developers.com/mate-9/development/oeminfo-library-t3555353
i will try and report
---------- Post added at 10:21 AM ---------- Previous post was at 09:42 AM ----------
cant push oeminfo file .....says adb error device null ... or i mustnt flash it ?!
really confused with the procedure

Waleedaligomaa said:
https://forum.xda-developers.com/mate-9/development/oeminfo-library-t3555353
i will try and report
---------- Post added at 10:21 AM ---------- Previous post was at 09:42 AM ----------
cant push oeminfo file .....says adb error device null ... or i mustnt flash it ?!
really confused with the procedure
Click to expand...
Click to collapse
i am trying it without the oem info lets see if it helps

awais_666 said:
i am trying it without the oem info lets see if it helps
Click to expand...
Click to collapse
i have oem for my model, but what im supposed to do with it ?

Root for J3 v 3rd Gen? Model SMJ337VZKA

Hello, I'm getting in a J3 (2018) V 3rd Gen from Verizon and it's impossible for me to find anything for this model, thus far. Has anyone had any success rooting or unlocking this phone?
SMJ337VZKA

torsitch said:
Hello, I'm getting in a J3 (2018) V 3rd Gen from Verizon and it's impossible for me to find anything for this model, thus far. Has anyone had any success rooting or unlocking this phone?
SMJ337VZKA
Click to expand...
Click to collapse
You won't be able to root that device. It's bootloader locked.

ashyx said:
You won't be able to root that device. It's bootloader locked.
Click to expand...
Click to collapse
Are you certain of that? :crying: I can deal with a locked bootloader but not being able to root it is disappointing

Just for other peoples' reference, the phone came in today and the model on the box is indeed SMJ337VZKA.
SW-VER or Firmware: J337VVRU1ARG1 which I believe I've seen before online (looks familiar). Other documentation online for this phone on Samsungs site and Verizon suggested to me it would have the J337VPP firmware, so it is interesting indeed.

torsitch said:
Hello, I'm getting in a J3 (2018) V 3rd Gen from Verizon and it's impossible for me to find anything for this model, thus far. Has anyone had any success rooting or unlocking this phone?
SMJ337VZKA
Click to expand...
Click to collapse
I requested a more appropriate thread for your device on xda's new device forum requests thread. I recommend you to buy an lg phone because they still have bootloader unlock methods as far as i can tell. since the device your looking at is from verizon well i say your luck isn't there because verizon is notorious for locking bootloaders on all phones.

ashyx said:
You won't be able to root that device. It's bootloader locked.
Click to expand...
Click to collapse
Hi. Is that going to be the case for att variant also? I had a sm-j320a with a locked bootloader and you were able to get us an Odin flashable engineering root. Is that out of the realm of possible anymore?

J337VVRU1ARG1_ENG_boot_noidodroid.tar.md5.zip
jonpjingleheimler said:
Hi. Is that going to be the case for att variant also? I had a sm-j320a with a locked bootloader and you were able to get us an Odin flashable engineering root. Is that out of the realm of possible anymore?
Click to expand...
Click to collapse
I have the english boot for this, here download - (Attachment at bottom of post)
Samsung Galaxy J3 2018
9/29/2018
ENG Boot
File Information:
Device Name :
J3 2018
Device Model :
SM-J337V
Version :
J337VVRU1ARG1
OS Version :
File Type :
ENG Boot
Brand :
Samsung
File Size :
21.59 MB
File Name :
J337VVRU1ARG1_ENG_boot_noidodroid.tar.md5.zip
Instructions :
For Samsung Galaxy android devices only.
Extract the (Zip,Rar,7z) file using 7z.
Download Odin
Extract Odin ZIP file
Open Odin.exe
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button and you know the rest

<OSM> MD5 hash value is invalid
repacking without md5 gives a different error
<ID:0/009> boot.img
<ID:0/009> RQT_CLOSE !!
<ID:0/009> Complete(Write) operation failed.

dosent work, say check fail
ant other ideas to bypass Google lock?
Samsung Galaxy J3 2018
9/29/2018
ENG Boot
File Information:
Device Name :
J3 2018
Device Model :
SM-J337V
Version :
J337VVRU1ARG1
OS Version :
File Type :
ENG Boot
Brand :
Samsung
File Size :
21.59 MB
File Name :
J337VVRU1ARG1_ENG_boot_noidodroid.tar.md5.zip
Instructions :
For Samsung Galaxy android devices only.
Extract the (Zip,Rar,7z) file using 7z.
Download Odin
Extract Odin ZIP file
Open Odin.exe
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button and you know the rest[/QUOTE]
---------- Post added at 08:01 PM ---------- Previous post was at 07:59 PM ----------
I was curious if you have had any success with rooting your device. I am stuck, any help would be appreciated.
ashyx said:
You won't be able to root that device. It's bootloader locked.
Click to expand...
Click to collapse

I might be able to root this with our boot root method. Would just need to get the boot.img and give it a try. Ill try to give it a run for its money. While not likely there is still a chance. Not the first boot loader locked device rooted.

P just to catch up this was able to be rooted via or method but it's just a work root

Run sd card as internal storage?
Can you put an sd card in this phone and format the sd card to run as internal storage? If anyone knows please let me know.
P.S. Can this be rooted as well?

Computerguy777 said:
Can you put an sd card in this phone and format the sd card to run as internal storage? If anyone knows please let me know.
P.S. Can this be rooted as well?
Click to expand...
Click to collapse
I don't think you can use a SIM card in that specific model for adopted storage but you can always use app2sd which works great or that other one I forget its name but it is the other top one the competitor of app2sd. I always just use app to SD for most Parts on older phones
Sent from my SM-G955U using Tapatalk

@ashyx So i bought a license for Chimera to temp remove KGLock on the j337u, to unlock OEM toggle.
After flashing the patched boot, almost instantly the phone locks up with a message saying something about Needing Authorization to use phone. Ive thought of anything and everything trying to disable encryption without TWRP to.flash the zip. no dice so far. So... my question to you would be, willing to port it? I have of files, etc.... i beliebe i remember seeing you tagged as a porter of twrp. If not so, would you be anle to point me in the right direction? would be eXtremely grateful. THANKS in advance for takin the time to read this.
Also, question 2. So, i noticed that ONCE knox connects to internet it updates and throws that lock up. I read its in boot or kernel, is it possivle to flash a another j337u fw, that wont have that baked in? Or will every fw i.find be the same, or...?
-MB

I bypassed Google lock on my galaxy J337 v using the sim pin method and it worked awesome. Only took me a month lol.