Database Info

CM11 Unable to update profile/PRL (Sprint)

Hello again!
So my latest issue is that I can't update my PRL or profile under carrier settings. The options are there but nothing happens when I select either.
Sent from my Nexus 5 using Tapatalk

I've already reported this. They should be fixing it. I would in the meantime just flash a stock rom and update then go back.

ssconceptz said:
I've already reported this. They should be fixing it. I would in the meantime just flash a stock rom and update then go back.
Click to expand...
Click to collapse
i did that and the PRL did not stick

dwreck420 said:
i did that and the PRL did not stick
Click to expand...
Click to collapse
PRL/Profile are not ROM dependent so there is no reason for it to not stick. Try again; make sure you update both before flashing back to another ROM.

it wont even run for me

ajf64 said:
it wont even run for me
Click to expand...
Click to collapse
What won't run? Are you stock?
Sent from my Nexus 5 using Tapatalk

thamajam said:
What won't run? Are you stock?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
prl and profile wont run im on cm 11 latest nightly

ajf64 said:
prl and profile wont run im on cm 11 latest nightly
Click to expand...
Click to collapse
I've never been able to update PRL and Profile on any non stock ROM. I'd recommend keeping a stock nandroid backup to restore to when you need to update.
Sent from my Nexus 5 using Tapatalk

thamajam said:
I've never been able to update PRL and Profile on any non stock ROM. I'd recommend keeping a stock nandroid backup to restore to when you need to update.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
i have been able to update profile and prl on almost all aosp based roms

[CM ROM [hlte/universal] OFFICIAL CyanogenMod Builds (Nightlies)

New thread for CyanogenMod builds (currently nightlies) for hlte devices. Previously, Note 3 (qualcomm devices) builds were separate, but now they are unified. So, hltespr, hltetmo, hltevzw, htlexx are now all in one build: hlte.
Download page can be found here: http://download.cyanogenmod.org/?device=hlte.
FAQs (please read before asking any questions):
AlecRobertson said:
Does this build work on the 4.4 bootloader? Yes! It works on the 4.4.2 NA6/NA7/NB3 bootloaders.
Is this build stable? No. There will be issues (see known issues below)
Where can I get the latest recovery that is compatible with this ROM? http://d-h.st/users/xiaolu/?fld_id=31963. You can also use the latest version of TWRP.
Can I update OTA from an hltexx, etc. build to an hlte build? No.
Is there any advantage to upgrading to the 4.4 bootloader? No, not really, unless you call not being able to downgrade an advantage .
Can I downgrade from a 4.4 bootloader to a 4.3 bootloader. No (you can thank Samsung for that)! The only exception to this is if you have a Canadian variant of the Note 3. Then, you can downgrade
Can I install this on an Eyxnos device? No!
Which GApps should I use? I would recommend the Paranoid Android GApps. You can them from here: http://forum.xda-developers.com/showthread.php?t=2397942. If you want the Nexus experience, get the GOOGLE STOCK PACKAGE.
Click to expand...
Click to collapse
Known issues:
AlecRobertson said:
LED doesn't seem to work [Being fixed. See: http://review.cyanogenmod.org/#/c/59879/] [FIXED]
Cannot set a preferred network type (com.android.phone crashes), unless using English (United States) as the system language.
Setting provider settings causes com.android.phone to crash, unless using English (United States) as the system language.
Sensors (e.g. humidity and temperature) stop working after the phone goes into a deep sleep (for some minutes)
Time settings are lost after every reboot.
MNVO network names are not shown correctly, e.g. Virgin is shown as Orange or T-Mobile UK,
Sometimes, after using the phone for a continued length of time, the screen becomes multi-coloured and the only fix is to reboot.
Audio channels are reversed when using headphones.
Phone randomly reboots.
USB OTG mounting doesn't work
Error while searching for mobile network
NFC doesn't work on any device, except the N9005.
Click to expand...
Click to collapse
What is the current build?
Current build: cm-11-20140303-NIGHTLY-hlte (direct download link by clicking on the build name) [Last updated: 03/03/14]
Please add any issues to the maintainer thread: http://forum.xda-developers.com/showthread.php?p=50427578

First! Downloading now
Sent from my SM-N900T using Tapatalk

Where i find Changelog build?
Sent from my SM-N9005 using XDA Premium 4 mobile app

rubino90 said:
Where i find Changelog build?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think it is this one (there isn't one for hlte yet): http://www.cmxlog.com/11/hltexx/.

rubino90 said:
Where i find Changelog build?
Click to expand...
Click to collapse
http://jenkins.cyanogenmod.com/view/All/job/android/59548/artifact/archive/CHANGES.txt/*view*/
This is the first CyanogenMod build of this type for device hlte
Click to expand...
Click to collapse
I know, today's changelog is not very useful. But "Tomorrow is another day"

Seems like date and time doesn't work on the 18/02/14 build except when synced with carrier, but it will lose the time data again after reboot.

Success on Rogers SM-N900W8 ...
Well, I took the plunge … once again … with surprising success.
Installation was quite simple on my Rogers (Canadian) SM-N900W8, so I would imagine that all Canadian variants will provide similar results.
Prior to installing the 20140218 unified (hlte) version of CM, I had stock Touchwiz installed, with TWRP 2.6.3.7 as my recovery.
I first performed a Nandroid (always suggested), and then simply flashed both CM and GAPPS through TWRP. Yes, you read the previous sentence correctly. I flashed right from my existing TWRP recovery.
Prior to flashing, I wiped System, Data, Dalvik and Cache, which I did twice (moderate OCD here); however, I did NOT touch Internal Storage.
So far, so good. The device booted very quickly, much more quickly than usual. I then entered all the initial set-up information, and arrived, quite smoothly, at the initial home screen. I then went into Settings and set-up virtually everything.
As I said above, so far, so good. Wifi works very well. LTE works, although, I had to manually go into the APN settings and select the pre-configured Rogers LTE APN. It took a few minutes, but LTE finally popped-up on the Notification Bar.
So, that's it. I'm now installing all my apps. I'll let you know how everything goes once they are all installed (about 100).
Good luck everyone.
Peter

wilfredlams said:
Seems like date and time doesn't work on the 18/02/14 build except when synced with carrier, but it will lose the time data again after reboot.
Click to expand...
Click to collapse
Thank you. Issue added to other thread. Please post issues in there instead of/in addition to here, thank you .
Link here if you've missed it: http://forum.xda-developers.com/showthread.php?t=2653031.

where can i get the newest recovery for note 3 kitkat ? woud like to flash it now but in rom manager on rooted stock rom it isnt there !!

Der_Flooo said:
where can i get the newest recovery for note 3 kitkat ? woud like to flash it now but in rom manager on rooted stock rom it isnt there !!
Click to expand...
Click to collapse
Here it is :good: : http://d-h.st/users/xiaolu/?fld_id=31963

​
LaZer713 said:
Here it is :good: : http://d-h.st/users/xiaolu/?fld_id=31963
Click to expand...
Click to collapse
thanks a lot bro :good:

Hey op just some advice. The main user page should be in general section for everyday talk of the builds.
The dev section should be problem solving and log cats.
Are you the maintainer as per cm or just another user making another thread here??
dont forget the thanks button if I helped out!!

Can anybody tell me if this build will appear as an update to those of us already running CM11 for hltexx? Currently no Stable or Nightly update is showing since the 20140130-NIGHTLY-hltexx build.

Robster83 said:
Can anybody tell me if this build will appear as an update to those of us already running CM11 for hltexx? Currently no Stable or Nightly update is showing since the 20140130-NIGHTLY-hltexx build.
Click to expand...
Click to collapse
I don't think so, as you've got an hltexx build, whereas this is an hlte build. I'll add this to the FAQ.

AlecRobertson said:
I don't think so, as you've got an hltexx build, whereas this is an hlte build. I'll add this to the FAQ.
Click to expand...
Click to collapse
Thanks. The blog post earlier (http://www.cyanogenmod.org/blog/unified-builds) mentioned they would add server-side checks to present the unified build via CM Updater, but I wasn't sure if that really meant upgrading from hltexx to hlte unified builds.

Robster83 said:
Thanks. The blog post earlier (http://www.cyanogenmod.org/blog/unified-builds) mentioned they would add server-side checks to present the unified build via CM Updater, but I wasn't sure if that really meant upgrading from hltexx to hlte unified builds.
Click to expand...
Click to collapse
I'd always do a clean install by downloading it on your PC and clean flashing it anyway. I know it's a pain, but you'll get far less issues like this.

AlecRobertson said:
I'd always do a clean install by downloading it on your PC and clean flashing it anyway. I know it's a pain, but you'll get far less issues like this.
Click to expand...
Click to collapse
Agreed. I've been flashing for two years and I've never done a dirty flash. One less thing to troubleshoot if there's a problem.
Click thanks if I helped you.
Sent from my SM-N900W8 using XDA Premium mobile app

Does anybody know of any big benefits to having the KK bootloader over the JB one? I'm on the JB bootloader but can upgrade to the KK one (I think?) by flashing the SM-N900W8 KitKat leak.
Sent from my SM-N900W8 using XDA Premium 4 mobile app

skadude66 said:
Does anybody know of any big benefits to having the KK bootloader over the JB one? I'm on the JB bootloader but can upgrade to the KK one (I think?) by flashing the SM-N900W8 KitKat leak.
Click to expand...
Click to collapse
The KK bootloader doesn't offer any benefit/new feature over the JB one, SS just changed it to give us a hard time with custom ROMs and prevent us from downgrading. All the bootloader does is to allow the device to... boot (!)

I like this new version, I haven't gotten the black screen of death yet, and things seem to run smoother (probably placebo), and the battery seems better
Sent from my SM-N900W8 using xda app-developers app

Problem while checking for update

I am trying to check update but showing a message that "we are unable to update" (as showing in the screenshot). I am rooted but using the stock rom. can somebody explain and give some information regarding this issue ..?? :silly:
PS: I am using the phone in India so i'm using wifi to update.

Somebody can correct me if I'm wrong but I'm pretty sure you can't update over wifi. You need a data connection and I'm pretty sure it has to be a Verizon connection. There's a few other posts regarding this around here somewhere but I don't think a solution has ever been found other than to flash a rom that has the update in it.

robocuff said:
Somebody can correct me if I'm wrong but I'm pretty sure you can't update over wifi. You need a data connection and I'm pretty sure it has to be a Verizon connection. There's a few other posts regarding this around here somewhere but I don't think a solution has ever been found other than to flash a rom that has the update in it.
Click to expand...
Click to collapse
no i hav updated it before... over my wifi ...u just need to put ur netwrk on LTE mode which ever network it is..

Why not just find the stock updated rom version here on XDA your seeking and install it yourself?

aryan1312 said:
no i hav updated it before... over my wifi ...u just need to put ur netwrk on LTE mode which ever network it is..
Click to expand...
Click to collapse
If it's a Verizon version of the one (which is what this section is for) then you do indeed need to have a connection to Verizon's network to check for the update, yes it can be downloaded on WiFi but the initial check for an update must be done wit h a Verizon connection

There's an update? Are we finally get extreme power saver?

Kinny89 said:
There's an update? Are we finally get extreme power saver?
Click to expand...
Click to collapse
No theirs no update for the Verizon m8 at this time

aryan1312 said:
I am trying to check update but showing a message that "we are unable to update" (as showing in the screenshot). I am rooted but using the stock rom. can somebody explain and give some information regarding this issue ..?? :silly:
PS: I am using the phone in India so i'm using wifi to update.
Click to expand...
Click to collapse
You're rooted.
Sent from my HTC6525LVW using XDA Free mobile app

naturecannon said:
Why not just find the stock updated rom version here on XDA your seeking and install it yourself?
Click to expand...
Click to collapse
Yes i can do that... infact i will do that just got curious... so asked if dre is a work around regarding this issue...

trook said:
You're rooted.
Sent from my HTC6525LVW using XDA Free mobile app
Click to expand...
Click to collapse
yes I'm

Any TRUE fix for signal drops

Ive a chinese oneplus one but no matter what i do the 3G which had ask the right frequencys constantly drops im mostly on 2G which is no good so is there a fix. Yet?

Be sure to report it here.
https://jira.cyanogenmod.org/plugins/servlet/mobile#issue/BACON-132/comment/34921
And no. Still no fix.
Going through the same issue myself except I get LTE but no 3G due to which all my calls go to voicemail
Sent from my A0001 using XDA Free mobile app

hashim71 said:
Be sure to report it here.
https://jira.cyanogenmod.org/plugins/servlet/mobile#issue/BACON-132/comment/34921
And no. Still no fix.
Going through the same issue myself except I get LTE but no 3G due to which all my calls go to voicemail
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Is your Preferred Signal on LTE/GSM (auto)? Check *#*#4636#*#* into phone.

Doesn't matter. I've tried too. It's a little better but the problem still exists. The phone fails to drop to 2G when a call is incoming.
Sent from my A0001 using XDA Free mobile app

Hope it is solved

https://forums.oneplus.net/threads/poor-signal-strength-not-looking-good.93350/
Let's all complain at OnePlus. Something might happen. Something good too...

Any change for any of you on the new ota update

The latest color os radio has fixed the signal issue. I downloaded and installed and can confirm it fixes it. Here is the radio. Flash with fast boot
https://app.box.com/s/hl15axfutntfu3d15dve

bash_array said:
The latest color os radio has fixed the signal issue. I downloaded and installed and can confirm it fixes it. Here is the radio. Flash with fast boot
https://www.dropbox.com/s/mqa2zfs1i5p6u79/NON-HLOS.bin?dl=0
Click to expand...
Click to collapse
Thanks for sharing, but you might want to include the actual fastboot command that needs to be issued in your post too.
Transmitted via Bacon

Fastboot flash radio NON-HLOS.bin

bash_array said:
The latest color os radio has fixed the signal issue. I downloaded and installed and can confirm it fixes it. Here is the radio. Flash with fast boot
https://app.box.com/s/hl15axfutntfu3d15dve
Click to expand...
Click to collapse
Do you have a link that cites this fix? I can't seem to find it and just want to confirm.

Ok thanks ill try

bash_array said:
The latest color os radio has fixed the signal issue. I downloaded and installed and can confirm it fixes it. Here is the radio. Flash with fast boot
https://app.box.com/s/hl15axfutntfu3d15dve
Click to expand...
Click to collapse
Don't think it fixes it for me its better i didnt switch to 2g on my daily commute to work which it usually would, but it still drops but not as bad

Same here too. Less troublesome after flashing the ColorOS radio.. My Moto G is leagues ahead...

Hope it's not an hardware issue

bash_array said:
The latest color os radio has fixed the signal issue. I downloaded and installed and can confirm it fixes it. Here is the radio. Flash with fast boot
https://app.box.com/s/hl15axfutntfu3d15dve
Click to expand...
Click to collapse
got another link? it seems to be removed

Flashing again in a very long time..

last time i flash was dec 2013 version 4.4.2
twrp version 6.3.3 i guess something like that
my nexus version is the ca / us version
what should i do first if wanna get back to flashing again?
new twrp? if i flash a new rom should root it again?

elnitrox said:
last time i flash was dec 2013 version 4.4.2
twrp version 6.3.3 i guess something like that
my nexus version is the ca / us version
what should i do first if wanna get back to flashing again?
new twrp? if i flash a new rom should root it again?
Click to expand...
Click to collapse
Always a good idea to update your recovery to the latest.
Root is IN the rom. I pretty much guarantee that any rom you flash via recovery will be pre-rooted.
If you're unsure of the processes for anything, have a read of all the sticky threads linked in my signature

Flash the latest twrp first, then pick a rom
Latest twrp - https://www.dropbox.com/s/05vh73mstsovz9j/twrp2801.zip?dl=0
Flash in recovery then reboot recovery to check version at the top
Sent from my Android L Nexus 5 via Tapatalk

rootSU said:
Root is IN the rom. I pretty much guarantee that any rom you flash via recovery will be pre-rooted.
Click to expand...
Click to collapse
Unless he wants to flash a stock image
Ben36 said:
Flash the latest twrp first, then pick a rom
Latest twrp - https://www.dropbox.com/s/05vh73mstsovz9j/twrp2801.zip?dl=0
Flash in recovery then reboot recovery to check version at the top
Click to expand...
Click to collapse
on that note, is twrp recommended over CWM? I noticed last week that I had cwm on mine

Bonusbartus said:
on that note, is twrp recommended over CWM? I noticed last week that I had cwm on mine
Click to expand...
Click to collapse
CWM is outdated. Use TWRP or Philz

Bonusbartus said:
Unless he wants to flash a stock image
Click to expand...
Click to collapse
Stock factory images aren't flashed in recovery.. That's why rootsu specifically said recovery
Bonusbartus said:
on that note, is twrp recommended over CWM? I noticed last week that I had cwm on mine
Click to expand...
Click to collapse
Personally, I've faced many issues with twrp in the past and ever since I've started using PhilzTouch (advanced version of cwm), I haven't looked back!
- Sent from an IceCold Hammerhead!

I on the other hand have never ever had any problems with twrp across various devices
Sent from my Android L Nexus 5 via Tapatalk

vin4yak said:
Stock factory images aren't flashed in recovery.. That's why rootsu specifically said recovery
Personally, I've faced many issues with twrp in the past and ever since I've started using PhilzTouch (advanced version of cwm), I haven't looked back!
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
I had a lot of issues with TWRP on my S3. We're you having issues on this device?

Aerowinder said:
I had a lot of issues with TWRP on my S3. We're you having issues on this device?
Click to expand...
Click to collapse
No mate. I was on HTC One X!
- Sent from an IceCold Hammerhead!

vin4yak said:
Stock factory images aren't flashed in recovery.. That's why rootsu specifically said recovery
Personally, I've faced many issues with twrp in the past and ever since I've started using PhilzTouch (advanced version of cwm), I haven't looked back!
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
according to the official thread:
End Of Support
Quote:
Project Status: No Longer Updated
As I mentioned before, I have a lot of new important projects in my real life. I am very happy to abandon this project for real life alternatives.
CWM is a dead project for now, until some dev resurrects it. I was about to do, until these new projects came.
Current version will probably work a while for many devices. Some devices with new ROM installers could have issues. Just use TWRP or the CM Simple Recovery
If the current version works for you, there is no reason you don't use it though. No need to ***** in all threads because it doesn't work for you. Just move on to other alternatives.
Click to expand...
Click to collapse
but I see that it has been updated 2 days ago...

Philz is good and it works for now. I too had issues with TWRP on my S3, That's why I moved to Philz on that device and brought Philz to the N5.
We may see bug fixes with Philz if the device maintainers notice them. For example, the update 2 days ago was a bug I found and fixed. So if there is something broken, we may see fixes. New features - nope. So lets see what happens when L comes out with its default device encryption. I'm not jumping ship until I have to.

Ben36 said:
Flash the latest twrp first, then pick a rom
Latest twrp - https://www.dropbox.com/s/05vh73mstsovz9j/twrp2801.zip?dl=0
Flash in recovery then reboot recovery to check version at the top
Sent from my Android L Nexus 5 via Tapatalk
Click to expand...
Click to collapse
I did download from your link however when i flash it in twrp itself it says failed..any link for any latest twrp
Sent from my Nexus 5 using XDA Free mobile app

elnitrox said:
I did download from your link however when i flash it in twrp itself it says failed..any link for any latest twrp
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Here you go http://forum.xda-developers.com/showthread.php?p=50042079
Sent from my Nexus 5 using XDA Free mobile app

elnitrox said:
I did download from your link however when i flash it in twrp itself it says failed..any link for any latest twrp
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
well, most recoveries arent going to be in a flash in recovery form. if its in a zip, you might have to extract it and use fastboot to flash the actual twrprecovery.img or you can use the flashify app(if you have root).

simms22 said:
well, most recoveries arent going to be in a flash in recovery form. if its in a zip, you might have to extract it and use fastboot to flash the actual twrprecovery.img or you can use the flashify app(if you have root).
Click to expand...
Click to collapse
Done using flashify.
Flashing complete.
Is the latest version 6.2.3.4 ?
So just choose any rom and thats it right?
Sent from my Nexus 5 using XDA Free mobile app

elnitrox said:
Done using flashify.
Flashing complete.
Is the latest version 6.2.3.4 ?
So just choose any rom and thats it right?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
no, its 2.8 http://teamw.in/project/twrp2/205
anyways, im using an old one as well(2.6.something), and everything works fine.
rom and gapps. most roms will need the google apps to be flashed as well, since its illegal to include them in publically distributed custom roms.

the only reason why i havent flash a new rom again because the rom that im currently running is good doesnt really give problems like random reboots
the only thing is its an older version.
and its really tiring thing to start all over again.
anyways any good rom out there?
its close to stock rom with minor tweaks
im on purity rom btw 4.4.2

elnitrox said:
the only reason why i havent flash a new rom again because the rom that im currently running is good doesnt really give problems like random reboots
the only thing is its an older version.
and its really tiring thing to start all over again.
anyways any good rom out there?
its close to stock rom with minor tweaks
im on purity rom btw 4.4.2
Click to expand...
Click to collapse
rastakat. a very close to stock rom, with the right amount of tweaks(just whats needed), and no more. no issues for anybody on that rom. its in the original development section.

and last thing whats the latest gapps?
any links
thanx for the guidance simms22

elnitrox said:
and last thing whats the latest gapps?
any links
thanx for the guidance simms22
Click to expand...
Click to collapse
heres pa gapps http://forum.xda-developers.com/showthread.php?t=2397942
but you can use any, really. if you get a minimal gapps, you can install the other gapps through the play store
---------- Post added 14th October 2014 at 12:06 AM ---------- Previous post was 13th October 2014 at 11:52 PM ----------
oh, youll also need to flash the latest supersu(for root) http://download.chainfire.eu/supersu