My girlfriend dropped her phone and it works but you cannot see anything on the screen because its cracked. She has a passcode lock on it when it boots up and i have no idea how to get her pictures and videos off of it. If anyone can give me some ideas of how to do this that would be awesome. She has some important pictures on there that she woulld like back.
If touch works, you could try going through the movements to enter the passcode and hope it works.
If touch doesn't work, is the bootloader unlocked? If so, boot into recovery. If you use a custom recovery like TWRP, you should have ADB access and will be able to access files on the virtual /sdcard. I don't think you can get into ADB on stock recovery, but doesn't hurt to try.
If you can't get into ADB through recovery, was USB Debugging enabled on the phone? If so, you might be able to get the files through ADB that way.
I found this, maybe it will help:
http://forum.xda-developers.com/showthread.php?t=2620456
You'll need ADB access to use it, however.
If this phone has never been hacked, rooted, and USB debugging never enabled, I think you would just have to replace the screen. It's actually pretty easy on these phones.
Yea she's not into this at all so it is bone stock and USB debugging is not enabled. Could I somehow get a USB OTG cable and hook a hdmi cable into to get the screen to show up on a tv or something? Wish the damn thing had removable memory.
Unfortunately, these phones don't have HDMI out.
It does, however, have USB OTG so you're onto something! Try plugging in a USB keyboard. I just tried setting a passcode and I can enter it using a keyboard.
Good thinking!
GnatGoSplat said:
Unfortunately, these phones don't have HDMI out.
It does, however, have USB OTG so you're onto something! Try plugging in a USB keyboard. I just tried setting a passcode and I can enter it using a keyboard.
Good thinking!
Click to expand...
Click to collapse
Nice! that should do the trick, my pc woulld recognize it after i get it unlocked i woulld assume. Thanks a lot for the input i hope it works (bonus points to me)
Yep, pretty sure your PC should recognize it. I think this will work. Good luck!
Related
after following the root instructions(stickied) in the gs3 development forum, i obtained root. however, my pc no longer shows my phone in the drive list, making it not possible(at least in my limited knowledge) to flash cm10. i have searched this site and much of the internet and have not found a solution. i have tried other usb cords and rebooting phone and computer, turned on/off usb debugging. i would rather not unroot unless that is the only way. also i am leery of doing a factory reset , because if it still does not recognize i will not be able to put my music back on. thanks for any help.
emacpgh said:
after following the root instructions(stickied) in the gs3 development forum, i obtained root. however, my pc no longer shows my phone in the drive list, making it not possible(at least in my limited knowledge) to flash cm10. i have searched this site and much of the internet and have not found a solution. i have tried other usb cords and rebooting phone and computer, turned on/off usb debugging. i would rather not unroot unless that is the only way. also i am leery of doing a factory reset , because if it still does not recognize i will not be able to put my music back on. thanks for any help.
Click to expand...
Click to collapse
stupid question, are u plugging into usb 3 port? if u are it doesnt work on mine either. but usb 2.0 works
Backstory:
My buddy bought 3 ASUS tf300t tablets online with broken screens. Unbeknownst to us they have this weird firmware issue because ASUS is lame and doesn't care about backwards compatibility. I've been trying to fix these tablets for a few weeks now and I'm just spinning myself in circles and getting frustrated. 1 of them is rooted with CWM recovery so that's the one I'm working on.
The issue:
According to http://forum.xda-developers.com/showthread.php?t=2091233&page=11 I can simply adb into the device copy the proper firmware to it's set directory, delete the old firmware, run the firmware update command and touch will be restored.
So how does one use adb without usb debugging enabled?
I tried through CWM, adb worked, but I can't get superuser to work, nor could I get the touch_firmware_update command to work.
So I downloaded the http://forum.xda-developers.com/showthread.php?t=1893714&highlight=root stock rom with usb debugging enabled. I flashed that rom and my computer brings up the normal TF300t drivers for MTP.
ADB doesn't see any devices...
I tried manually replacing those drivers with the ADB drivers from google because I'm a touch retarded and I thought it would work. My mom says that I'm super smart and really handsome, but I feel like she lies to me.
There's just so many new terms and I've spent so many hours on it that frankly, if search did bring up the answer, I would miss it.
I'd appreciate any help, and if you help me fix it, I'll make a youtube video thanking you in the creepiest way possible.
-Thanks
duffskeeze said:
Backstory:
My buddy bought 3 ASUS tf300t tablets online with broken screens. Unbeknownst to us they have this weird firmware issue because ASUS is lame and doesn't care about backwards compatibility. I've been trying to fix these tablets for a few weeks now and I'm just spinning myself in circles and getting frustrated. 1 of them is rooted with CWM recovery so that's the one I'm working on.
The issue:
According to http://forum.xda-developers.com/showthread.php?t=2091233&page=11 I can simply adb into the device copy the proper firmware to it's set directory, delete the old firmware, run the firmware update command and touch will be restored.
So how does one use adb without usb debugging enabled?
I tried through CWM, adb worked, but I can't get superuser to work, nor could I get the touch_firmware_update command to work.
So I downloaded the http://forum.xda-developers.com/showthread.php?t=1893714&highlight=root stock rom with usb debugging enabled. I flashed that rom and my computer brings up the normal TF300t drivers for MTP.
ADB doesn't see any devices...
I tried manually replacing those drivers with the ADB drivers from google because I'm a touch retarded and I thought it would work. My mom says that I'm super smart and really handsome, but I feel like she lies to me.
There's just so many new terms and I've spent so many hours on it that frankly, if search did bring up the answer, I would miss it.
I'd appreciate any help, and if you help me fix it, I'll make a youtube video thanking you in the creepiest way possible.
-Thanks
Click to expand...
Click to collapse
Short of investing 60 bucks on a docking keyboard, your best bet would be to get a usb dongle that allows you to plug in a keyboard so you can be sure debugging is ticked. Otherwise, if it's enabled and you've installed the proper drivers, Windows should see your device. From there, it's a breeze, if the hardware is good. You don't have to do Youtube. Just stop crying, Gives me the creeps.
graphdarnell said:
Short of investing 60 bucks on a docking keyboard, your best bet would be to get a usb dongle that allows you to plug in a keyboard so you can be sure debugging is ticked. Otherwise, if it's enabled and you've installed the proper drivers, Windows should see your device. From there, it's a breeze, if the hardware is good. You don't have to do Youtube. Just stop crying, Gives me the creeps.
Click to expand...
Click to collapse
Yep, your only for sure way would be a USB OTG adapter or a dock. Heres the adapter in the US for 10 bucks shipped on eBay. This will let you use any regular USB mouse instead of the touch screen
http://www.ebay.com/itm/USB-to-OTG-...ablet_eReader_Accessories&hash=item41700957d7
Heres another for 4 more bucks that gives you Two USB ports :
http://www.ebay.com/itm/Dual-40-Pin...ablet_eReader_Accessories&hash=item3cce7dd4c8
Also you can try giving this a shot ....http://code.google.com/p/androidscreencast/
Its an app that pushes your phones screen to your desktop so you can use a keyboard and mouse on it. Not sure if it will work for you since im sure it needs debugging on, but also worth a shot. I use MyMobiler on mine but it needs to be set up on the device itself first. This looks plug and play but says it has slow refresh rates.
As far as the ADB drivers, Im using the universal drivers found here : http://forum.xda-developers.com/showthread.php?t=2139767 and everything works as it should . Try those out
Oh and one more thing.. You might be able to use fastboot to push a touchpanel firmware zip. This is a different device, but you could try it :
http://forum.xda-developers.com/showthread.php?t=2159863
pyraxiate said:
Yep, your only for sure way would be a USB OTG adapter or a dock. Heres the adapter in the US for 10 bucks shipped on eBay. This will let you use any regular USB mouse instead of the touch screen
http://www.ebay.com/itm/USB-to-OTG-...ablet_eReader_Accessories&hash=item41700957d7
Heres another for 4 more bucks that gives you Two USB ports :
http://www.ebay.com/itm/Dual-40-Pin...ablet_eReader_Accessories&hash=item3cce7dd4c8
Also you can try giving this a shot ....http://code.google.com/p/androidscreencast/
Its an app that pushes your phones screen to your desktop so you can use a keyboard and mouse on it. Not sure if it will work for you since im sure it needs debugging on, but also worth a shot. I use MyMobiler on mine but it needs to be set up on the device itself first. This looks plug and play but says it has slow refresh rates.
As far as the ADB drivers, Im using the universal drivers found here : http://forum.xda-developers.com/showthread.php?t=2139767 and everything works as it should . Try those out
Oh and one more thing.. You might be able to use fastboot to push a touchpanel firmware zip. This is a different device, but you could try it :
http://forum.xda-developers.com/showthread.php?t=2159863
Click to expand...
Click to collapse
I gave up, but, I appreciate it. I even ended up buying the adapter, ended up bricking the tablets.
Okay I looked far and wide for a solution to my problem before making this thread. I have officially ran dry of any further ideas. Basically this is my problem.
>Dropped phone and broke the LCD screen. I cannot see ANYTHING. Nothing.
>I am trying to pull my sms, pics, videos off of the phone.
>However, I cannot file browse my phone. I tried to use AirDroid and that will not connect to my phone. I tried to plug in the USB cable and do a transfer that way, but my phone connects as camera storage, not external hd. Since the screen is broken, I cannot change the storage mode...
>I cannot put my phone into USB debugging mode to use adb command line to access stuff.
>There is NO SD CARD IN THE PHONE.
>Also, the digitizer will not work at all as well, so I cannot even attempt to blindly change the storage mode from camera to external storage.
I am so stuck, can somebody please assist me here... I know there has got to be a way somehow.
xbrxlunch said:
Okay I looked far and wide for a solution to my problem before making this thread. I have officially ran dry of any further ideas. Basically this is my problem.
>Dropped phone and broke the LCD screen. I cannot see ANYTHING. Nothing.
>I am trying to pull my sms, pics, videos off of the phone.
>However, I cannot file browse my phone. I tried to use AirDroid and that will not connect to my phone. I tried to plug in the USB cable and do a transfer that way, but my phone connects as camera storage, not external hd. Since the screen is broken, I cannot change the storage mode...
>I cannot put my phone into USB debugging mode to use adb command line to access stuff.
>There is NO SD CARD IN THE PHONE.
>Also, the digitizer will not work at all as well, so I cannot even attempt to blindly change the storage mode from camera to external storage.
I am so stuck, can somebody please assist me here... I know there has got to be a way somehow.
Click to expand...
Click to collapse
Sorry
Over my head.
But hachamacha did get a notice.
aviwdoowks said:
Sorry
Over my head.
Click to expand...
Click to collapse
This is a sad day for me.
xbrxlunch said:
Okay I looked far and wide for a solution to my problem before making this thread. I have officially ran dry of any further ideas. Basically this is my problem.
>Dropped phone and broke the LCD screen. I cannot see ANYTHING. Nothing.
>I am trying to pull my sms, pics, videos off of the phone.
>However, I cannot file browse my phone. I tried to use AirDroid and that will not connect to my phone. I tried to plug in the USB cable and do a transfer that way, but my phone connects as camera storage, not external hd. Since the screen is broken, I cannot change the storage mode...
>I cannot put my phone into USB debugging mode to use adb command line to access stuff.
>There is NO SD CARD IN THE PHONE.
>Also, the digitizer will not work at all as well, so I cannot even attempt to blindly change the storage mode from camera to external storage.
I am so stuck, can somebody please assist me here... I know there has got to be a way somehow.
Click to expand...
Click to collapse
I can only try to get this started since I'm leaving town in about 1/2 hour, so maybe this'll help or I hope so:
If the phone is otherwise working OK, and the reason there's "NO SDCARD" is because you didn't physically put one in, then you've still got hope to grab stuff from the internal /sdcard, or anyplace internal. I suppose you must have had USB debugging turned off on the phone. OK: Here is one possible path but it depends on this question:
Can you get to the fastboot screen: (I think on Razr HD, it is +-(Vol) and (Pwr) simultaneously for a few seconds, then let go, wait a few seconds and go to wherever you keep fastboot or mfastboot (and probably adb). On my system it is in /android-system-sdk/platform-tools/. If you need it you can google it and get those tools for your platform (PC/MAC). Instructions once you get a device number back from this: "fastboot devices":
- Get a copy of Philz Touch (maybe other recoveries do the same thing, but I know Philz does) and put it in that same folder as the platform-tools.
- If you got the fastboot devices OK, then try to flash the recovery which will be like this: "fastboot flash recovery {name_of_recovery_above}"
- Using fastboot, do "fastboot reboot-recovery", wait .. , when recovery has booted might see something in systray, but more importantly,
"adb devices" should now return a device number. Adb doesn't require anything(settings) from the phone since the phone is in recovery mode.
- assuming a lot of success ^^ , do this:
- adb shell
- su
- ls /sdcard/* and look at the output for files on the sdcard. (It should be internal sdcard, not your external non-installed one)
- /sdcard should be mounted in recovery since recovery uses it so continuing may be kind of obvious now.
- find what you want to save on /sdcard
- make sure you either can see it on the screen or cut and paste it somewhere (notepad whatever).
- type in exit, then exit, out of adb, back to shell, or cmd.
- do this to get your stuff: "adb pull /sdcard/{your stuff}" #note: If you do it by folder name, it'll just be transferrred to that same platform-tools folder.
Click to expand...
Click to collapse
Good luck. If I don't reply to any questions, it's cause I'm on a plane. There won't be much if any internet where I'm going. I think that's your best bet. Cheers.
edit: oh yeah: Here's a link to the thread where the recovery you want probably is: http://forum.xda-developers.com/showthread.php?t=2686374
hachamacha said:
I can only try to get this started since I'm leaving town in about 1/2 hour, so maybe this'll help or I hope so:
If the phone is otherwise working OK, and the reason there's "NO SDCARD" is because you didn't physically put one in, then you've still got hope to grab stuff from the internal /sdcard, or anyplace internal. I suppose you must have had USB debugging turned off on the phone. OK: Here is one possible path but it depends on this question:
Can you get to the fastboot screen: (I think on Razr HD, it is +-(Vol) and (Pwr) simultaneously for a few seconds, then let go, wait a few seconds and go to wherever you keep fastboot or mfastboot (and probably adb). On my system it is in /android-system-sdk/platform-tools/. If you need it you can google it and get those tools for your platform (PC/MAC). Instructions once you get a device number back from this: "fastboot devices":
Good luck. If I don't reply to any questions, it's cause I'm on a plane. There won't be much if any internet where I'm going. I think that's your best bet. Cheers.
edit: oh yeah: Here's a link to the thread where the recovery you want probably is: http://forum.xda-developers.com/showthread.php?t=2686374
Click to expand...
Click to collapse
If I can get my phone to turn off, then yes I can get it into fast boot. However, since I cannot use the touch screen, I dont think I can select the option to power the phone down. I know how to reset it though, so is there any possible chance that I can still get into hboot from resetting the phone the holding the key combination???
xbrxlunch said:
If I can get my phone to turn off, then yes I can get it into fast boot. However, since I cannot use the touch screen, I dont think I can select the option to power the phone down. I know how to reset it though, so is there any possible chance that I can still get into hboot from resetting the phone the holding the key combination???
Click to expand...
Click to collapse
I do not have a m/HD anymore. But by holding all keys from the booted up state. About 5 sec of holding then toggle pwr off, on then off while continuing to hold vol +, -. This will call the bootloader. Ap fastboot is there. Search for a screen shot. Vol - to scroll too + to select. On 4.1.2 anyway.
aviwdoowks said:
I do not have a m/HD anymore. But by holding all keys from the booted up state. About 5 sec of holding then toggle pwr off, on then off while continuing to hold vol +, -. This will call the bootloader. Ap fastboot is there. Search for a screen shot. Vol - to scroll too + to select. On 4.1.2 anyway.
Click to expand...
Click to collapse
By all keys do you mean Power + VOL- + VOL+? All at same time?
Yes. On the last pwr/toggle off, release vols too.
Not sure what else you could do if you are in camera mode.
At least you should be able to pull all your photos off. I would think that would be pretty important.
The only other thing is to replace the screen.
I have overcome this same problem with a different phone using an HD dock, the type that has the USB ports and hdmi on the back. Plug the phone into TV with hdmi, plug a mouse into a USB port on the dock.
Give me a few minutes to track down some pics.
OK, found where I posted this info. I hope it's ok to post this link for the sake of helping the OP.
http://www.droidrzr.com/index.php?/topic/30847-#entry367661
you could buy a micro hdmi to hdmi cable and a otg mouse that works with you phone.
billycar11 said:
you could buy a micro hdmi to hdmi cable and a otg mouse that works with you phone.
Click to expand...
Click to collapse
Yes, this will do the same as the HD dock.
pistacios said:
I have overcome this same problem with a different phone using an HD dock, the type that has the USB ports and hdmi on the back. Plug the phone into TV with hdmi, plug a mouse into a USB port on the dock.
Give me a few minutes to track down some pics.
OK, found where I posted this info. I hope it's ok to post this link for the sake of helping the OP.
http://www.droidrzr.com/index.php?/topic/30847-#entry367661
Click to expand...
Click to collapse
Hmmm
Ok, I have a micro HDMI cable, but now I just need to figure out a way to navigate around.
xbrxlunch said:
Ok, I have a micro HDMI cable, but now I just need to figure out a way to navigate around.
Click to expand...
Click to collapse
Try to touch your screen while your HDMI is connected and displayed on your TV to confirm if your digitizer is working or not.
To navigate, try billycar11's suggestion with an otg cable and mouse?
Edit: you might want to try different sections of your screen for touch input response.
I did this once with a micro HDMI cable and a USB OTG adapter with a wireless keyboard/mouse combo plugged into it. Worked like a charm.
Hi,
To cut a long story short, my four day old phone was run over by a bus last night and the screen shattered making it unresponsive to any touch, though the phone itself is still "working". I have a pattern lockscreen which I obviously can't undo and Android File Transfer won't let me see the data on the phone until it's unlocked - is there any way I can access the photos I have taken on the phone (they didn't upload to the cloud because I wasn't on wifi)?
If it's relevant, the bootloader is unlocked.
Thanks,
F
First up, count yourself lucky that you were not talking on the phone at the time
You should be able to get them by plugging the phone into your pc should enable you to get your photos from it.
GTCC said:
First up, count yourself lucky that you were not talking on the phone at the time
You should be able to get them by plugging the phone into your pc should enable you to get your photos from it.
Click to expand...
Click to collapse
Thank you!
I was running to catch said bus, tripped, phone went flying, bus moved off and crushed the phone!
I have a Mac and use Android File Transfer which won't recognise the device until the lockscreen is cleared - do you think I'll have more luck if I plug it into a Windows PC?
Should do. I am able to get stuff from mine by just plugging it into my Surface 2
Much appreciated - I'll post again after I've found someone with a Windows-based laptop.
GTCC said:
Should do. I am able to get stuff from mine by just plugging it into my Surface 2
Click to expand...
Click to collapse
You should be able to connect a mouse using an OTG cable and micro USB port.
extrem0 said:
You should be able to connect a mouse using an OTG cable and micro USB port.
Click to expand...
Click to collapse
Yup, that's an idea.
Or you have USB debugging enabled, try adb pull command?
The story so far - I connected the OPO to a Windows PC and it was recognised as a Portable Media Device. That's where the story ends - no files were shown.
When I carried out the same procedure with my Nexus 5, I had to switch between MTP and PTP for any files to be shown on the PC - when initially plugged in (in MTP), nothing was shown but when switched to PTP, all the photos popped up and when switched back to MTP, all data on the OPO was shown.
Obviously, I can't change the USB setting on the OPO. However, now the battery has run down, I can reboot the OPO into fastboot or recovery if required (USB debugging is enabled) with stock recovery. Is there a way of transferring data from the OPO when in recovery or fastboot mode? If there is, a step-by-step guide would be extremely appreciated.
I wasn't able to switch off the phone once the screen was damaged. Is there a way to force it to switch off using only the buttons?
Thanks,
F
extrem0 said:
You should be able to connect a mouse using an OTG cable and micro USB port.
Click to expand...
Click to collapse
This sounds interesting - how does this work and is this the cable I'd need? http://www.maplin.co.uk/p/maplin-tech-on-the-go-micro-usb-to-female-usb-n36qg
If I could just switch wifi on remotely, the photos should upload to my Dropbox storage automatically!
FerozeIyer said:
This sounds interesting - how does this work and is this the cable I'd need? http://www.maplin.co.uk/p/maplin-tech-on-the-go-micro-usb-to-female-usb-n36qg
If I could just switch wifi on remotely, the photos should upload to my Dropbox storage automatically!
Click to expand...
Click to collapse
Exactly.
extrem0 said:
Exactly.
Click to expand...
Click to collapse
If I connect a mouse via OTG, what can I do?
EDIT: I've just watched this video:
http://www.xda-developers.com/android/use-your-keyboard-and-mouse-on-android-with-usb-on-the-go-xda-developer-tv/
Will I be able to get past the pattern lockscreen using a mouse? When connecting the OTG cable and mouse, should it work with no further setting changes required on the phone?
FerozeIyer said:
If I connect a mouse via OTG, what can I do?
EDIT: I've just watched this video:
http://www.xda-developers.com/andro...-android-with-usb-on-the-go-xda-developer-tv/
Will I be able to get past the pattern lockscreen using a mouse? When connecting the OTG cable and mouse, should it work with no further setting changes required on the phone?
Click to expand...
Click to collapse
I'd say it will work.
I don't own an Opo, but I can do this in all my cm devices without doing anything. It's possible to past the lock screen. I'd ask someone with an Opo and otg cable to test it for you.
extrem0 said:
I'd say it will work.
I don't own an Opo, but I can do this in all my cm devices without doing anything. It's possible to past the lock screen. I'd ask someone with an Opo and otg cable to test it for you.
Click to expand...
Click to collapse
Thank you. I've ordered this: http://www.ebay.co.uk/itm/121047718336?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
and will connect a mouse when I receive it. Does one hold down the left button while dragging the mouse in the lockscreen pattern?
FerozeIyer said:
Thank you. I've ordered this: http://www.ebay.co.uk/itm/121047718336?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and will connect a mouse when I receive it. Does one hold down the left button while dragging the mouse in the lockscreen pattern?
Click to expand...
Click to collapse
In my S4 I can do that. You need to hold the left button and complete your pattern.
Thank you so much to all who replied and sympathised with my predicament.
SUCCESS!
The OTG cable I ordered from ebay arrived this morning - I connected my mouse to the phone via the OTG cable and, voila, I was able to do everything as if the touchscreen was still working.
Without this forum, I'd have lost some precious memories of earlier in the day, before I smashed my beautiful OnePlus One.
In other news, the replacement OPO arrived this morning!
Thanks again,
F
Nice! How did you replace it? Bought a new one?
extrem0 said:
Nice! How did you replace it? Bought a new one?
Click to expand...
Click to collapse
Yes, I managed to get an invitation from the thread here on xda on Saturday morning. I'll deal with insurance and sell it on in due course....
My car just got stolen. I dropped my (stock) One Plus One when chasing the guys. The screen is cracked and my touchscreen doesnt work anymore. I need a way to access it from my computer so I can still use it until I get a new one.
I know that I can connect a mouse via an otg adapter but I only have wireless mouses and I don't think those will work.
I found a tool which allows me to control the phone with my laptop but it needs usb debugging enabled. I have Google Now enabled so I am able to access some options with voice commands.
So my questions are:
Is there a way to enable usb debugging with voice commands?
Is there an app i can download with voice commands and set up without a touchscreen needed that lets me control it Teamviewer style.
Any other suggestions?
I hope your bootloader is unlocked, is it? if so. go to fastboot mode, flash custom recovery, boot into custom recovery then plug phone into pc- everything will come up. if not. try with stock recovery but im not sure if that works, never tried it
Hope your alright about your car too , hope it all goes well
idonttakedrugs said:
I hope your bootloader is unlocked, is it? if so. go to fastboot mode, flash custom recovery, boot into custom recovery then plug phone into pc- everything will come up. if not. try with stock recovery but im not sure if that works, never tried it
Hope your alright about your car too , hope it all goes well
Click to expand...
Click to collapse
If you don't have USB debugging on, it's very likely you cannot access the phone.
If you have it, TWRP recovery is touch only, though!
If your wireless mouse uses a usb dongle it will still work through OTG mine does aswell.
Otherwise just buy a simple mouse and OTG cable they are not that expensive.
Sorry to hear about your car.
Uqbar said:
If you don't have USB debugging on, it's very likely you cannot access the phone.
If you have it, TWRP recovery is touch only, though!
Click to expand...
Click to collapse
noooopeeee, dont need to touch the recoery. just plug in and it'll appear.
wireless mouse works perfectly i use both mouse and keyboard (i had brought combo dongle )