Hi,
I have a Chinese OPO running Color OS 1.2.0, flashed it and installed custom ROMs, 1st CM 11S and than Mahdi.
1. The issue is, earlier on factory Color, even in pitch dark the flash turned ON automatically and took a crystal clear pic. ( on any mode, flash is set at auto........ always)
2. With Custom ROMs pics aren't that crisp, but the main issue is it wont turn on the flash in dark EXCEPT in Auto mode, not in HDR.......any suggestions?
3. When I reverted back to Color OS now again it only turns on flash on Normal and Beauty not in HDR or Oneplus one modes.....any ideas why?
Thanks.
PS: I didn't take a back up of Color 1.2.0 for OPO, where could I download the original one that came with the phone?
Related
Hey guys.
Running zone ICS meant for stingray on my wifi xoom. Was running perfectly two weeks except for camera of course. Today when turning it on, the boot screen was totally red and when booted. Most blacks were showing red with granulation and the stock "grid" honeycomb wallpaper was showing a slightly off hue blue with green around the cells.
Any ideas if a quick flash back to stock would fix this or is this a hardware problem?
Thank you
I would try to flash the TeamEos ICS wifi rom and gapps but only after a complete data wipe cache wipe and dalvik cache wipe.
didnt work
Flashed back to team tiamat rom, but still same black as reds. And white with blue lines
Situation is kinda strange.
Yesterday i was bored and i started to flash some roms on my OPO. I started with the latest ColorOS that i found here on XDA, but i didn't like it. So i flashed PA 4.6 beta 6. I noticed that the red boot logo of colorOS remained despite the full wipe of the internal storage. And the fastboot mode started to show some chinese characters instead of the regular ones.
But that's not the problem. Problem is that this morning i wasn't able to turn off a call because the screen turns off every time a call is made and there's no chance to turn it again on. The only thing i could do is to long press the power button and reset the phone. The call starts, the speaker works, the screen turns on and you can't do nothing than this.
I said "ok, it could be the PA rom, it's in beta, y'know"...So i flashed the PA stable and...same problem.
Then i tried the first rom i saw (vanir lollipop, last build) and...same problem? WTF?
Now i'm flashing the original 44s by fastboot and see what happens. In case nothing happens with the fastboot way, i will try to flash it by recovery. But i have a bad feeling about this.
Any similar experiences? I will keep the thread updated for people with the same problem.
EDIT 1: ok, after the fastboot flash of the cm11 44s i'm able to make calls without those problems. It will be amazing if the problem were still there.
EDIT 2: i have to say that the chinese fastboot and the red logo are gone now.
The reason your proximity sensor stopped working was because of the modem you flashed while you flashed ColorOS.
I flashed ColorOS aswell and has the same proximity sensor issue after flashing back a CM11 rom.
mumaster20 said:
The reason your proximity sensor stopped working was because of the modem you flashed while you flashed ColorOS.
I flashed ColorOS aswell and has the same proximity sensor issue after flashing back a CM11 rom.
Click to expand...
Click to collapse
Damn! I knew it!
That terrible ROM messed up all my phone -_-
Hey guys,
i have 2 from in the title mentioned device(they're both dual core versions with 512 mb ram), and flashed on both a custom rom, because the stock rom available for it and the stock rom which was on it after shipping were working badly. (slow reaction on starting/stopping applications, crashing and low available memory(ram))
But the custom rom i found for them works great, without any problem until now. (only one of them, both has the same rom, but only one of them is faulty, and i don't think so it's caused by the rom flashing)
The problem occured yesterday evening after 2 days of using after flashing the custom rom. The problem itself is, that the screen became white, fully bright white.
I tried to reboot the phone maybe it just stucked or crashed or something like that, but after reboot, on startup/bootup, i got the same white screen, which became sometimes a bit dimmer, sometimes again bright, but i think that's just the screen backlight, the background remained full white.
I tried to boot into recovery mode, the same happened.
Then i tried to boot into bootloader/fastboot mode through my pc with usb cable plugged in and in adb, i tried to log into the shell. (adb shell). That's works, i can see all the folders and files in the internal storage. Anyways, i flashed back a stock rom(system and boot img, there was nothing else in it) through adb without problem, but the problem still remained.
I think the problem is related to the screen, or some cable contact failure or maybe the gpu?
Any suggestion what could be the problem, and what can i do against it?
Thanks for your answer and help in advance.
Matt
PS: i wanted to post the links to the roms too, but i don't have enough post yet.
Hi all,
I have a problem installing Lineage on a (two) Oneplus 6.
I follow the official installation instructions (https://wiki.lineageos.org/devices/enchilada/install) using the latest builds of TWRP/LineageOS/Gapps linked on that site.
All works (using Windows and Linux) until the final reboot. Then it ends in a black screen and a light blue LED.
I have two Oneplus 6. On one, I somehow managed to boot Lineage*. But after an update of Lineage OS it ended in the same black screen and light blue LED.
So it seems to be a boot problem. Fastboot works and it is possible to recover the phone with the MsmDownloadTool. But everytime it ends up in a black screen. And since it once booted, I hope for some magic fastboot/adb command to solve it.
I tried some additional commands like fastboot set_active=a/b but without luck.
Any ideas or suggestion?
Thanks a lot in advance!
*unfortunately I have no idea what was different.
PS: Installing Gapps fails (error 20 iirc) but the result is the same without trying to install Gapps
I have exactly the same issue. *bump*
The LOS "guide" is missing several steps.
I don't recall the details, but I ended up several times at exactly the same place when installing LOS.
Finally, I found
https://www.codetinkerer.com/2019/08/31/install-lineageos-16-on-oneplus-6.html
which is not only very clear, but also includes a lot of explanations about what's going on behind the scenes.
Sadly, it doesn't cover updates via LOS' built-in updater.
After the latest system upgrade to Color 11 (API30) dark mode keeps dropping out and reverting to normal mode.
Phone details; Oppo CPH2069-Qcom; CVH2069_11_C,81. What do I need to do to have a stable dark mode. Thanks.