Related
Can I sommehow install Android 3.0 or 4.0 on my tablet. It has 1Ghz Cortex-A8 and 512MB RAM, 800x600 res. Please help. It is great device but with 2.3
If it is possible, tell me how to do it, how to root it, I will really try to do whatever it takes to upgrade it.
edin.dino.u said:
Can I sommehow install Android 3.0 or 4.0 on my tablet. It has 1Ghz Cortex-A8 and 512MB RAM, 800x600 res. Please help. It is great device but with 2.3
If it is possible, tell me how to do it, how to root it, I will really try to do whatever it takes to upgrade it.
Click to expand...
Click to collapse
I've just bought the same device.
It seems that only temporary rooting can be done ATM- /system is a cramfs image (not writable).
SuperOneClick gives shell root (via adb) but messes "internal sd" access
EDIT:
There is a prerooted custom firmware available- source (4pda.ru).
What you need:
-get Rockchip Batch Tool from HERE (contains USB drivers)
-get a firmware:
a) PMP3384BRU_20111206_V1.1.9_root -prerooted image, no other changes
b) PMP3384BRU_20111206_V1.1.9_root_607Mb_free - 607 MB for /data, prerooted, Golauncher, Gokeyboard, Adobe Reader, CoolReader, Dolphin browser HD, ButtonSaviour- only for RockChip Batch Tool flashing
How to flash:
1. fully charge your MultiPad
2. backup internal flash- it will be erased
3. unpack Rockchip Batch Tool and launch it as admin
4. press and hold Reset (on the back), plug USB cable, release Reset
5. there should be a popup asking for drivers- they are placed in Rockchip_Batch_Tool_v1.4\drivers\[windows version]. If there is no popup go to Device Manager and install drivers
6. load firmware .img file to Rockchip Batch Tool and click Update button
NOTE
PMP3384B is the same as PMP3384BRU, the only difference is initial localization (B= english, BRU= russian)
Working or no working ? Can you geave me TOOL_RK2918.zip ?
I've tested it, and it's fully working,
i've flashed PMP3384BRU_20120116_V1.1.9_Full_root_v2 (available at that link)
which is official 1.1.09 firmare with rw filesystem and down button reassigned to back, among other things
He gave you the tools, it's the first link
Still no info about 4.0? I have installed the PMP5080B_2.0.0_20120401 (has ICS) on it and the button worked as volume but the touchscreen doesn't respond. i use Rockchip Batch Tool
Im going to root him.I think nothing will hapend.
EDIT : Working, thanks !
Prestigio PMP3384B
Is it 3.0 or 4.0? Please let me know.
Greetings
Paul
gen_scheisskopf said:
I've just bought the same device.
It seems that only temporary rooting can be done ATM- /system is a cramfs image (not writable).
SuperOneClick gives shell root (via adb) but messes "internal sd" access
EDIT:
There is a prerooted custom firmware available- source (4pda.ru).
What you need:
-get Rockchip Batch Tool from HERE (contains USB drivers)
-get a firmware:
a) PMP3384BRU_20111206_V1.1.9_root -prerooted image, no other changes
b) PMP3384BRU_20111206_V1.1.9_root_607Mb_free - 607 MB for /data, prerooted, Golauncher, Gokeyboard, Adobe Reader, CoolReader, Dolphin browser HD, ButtonSaviour- only for RockChip Batch Tool flashing
How to flash:
1. fully charge your MultiPad
2. backup internal flash- it will be erased
3. unpack Rockchip Batch Tool and launch it as admin
4. press and hold Reset (on the back), plug USB cable, release Reset
5. there should be a popup asking for drivers- they are placed in Rockchip_Batch_Tool_v1.4\drivers\[windows version]. If there is no popup go to Device Manager and install drivers
6. load firmware .img file to Rockchip Batch Tool and click Update button
NOTE
PMP3384B is the same as PMP3384BRU, the only difference is initial localization (B= english, BRU= russian)
Click to expand...
Click to collapse
links are down, anyone have a working link to the firmware and tools?
Bricked it!
Any help would be much appreciated
I followed the instructions to the letter. After rockbatch finished I checked the tab and it wouldn't even turn on
if bricked
Bricked it too...
But i solved that very easy !!! Im so happy :laugh: I registered here just cause i wanna share this with others who have same problem
so....
Follow gen_scheisskopf 2nd post on this topic + you need to hold RESET button whole the time while Rockchip Batch Tool download firmware...
steps (only if you have bricked PMP 3384B):
1.Unzip PMP3384BRU_20111206_V1.1.9_root.zip and Rockchip Batch Tool.zip
2.Install drivers from Rockchip Batch Tool/driver folder
3.Open Rockchip Batch Tool.exe
4.Device is off,hold reset button 3,4sec. and put usb cable,release Reset button.
5.Now,if you install drivers properly from Rockchip Batch Tool folder (folder Drivers) you should see green light on 1. connected device in rockchip software...
6.FW PATH : (first option in this program)Pick this img - PMP3384BRU_20111206_V1.1.9_root.img
7.If firmware load success then do next step
8.Hit restore button and hold reset button(on your tablet) whole the time till process end.
9.Thats it...after success download firmware it will probably fail at next process -Checking firmware ,but nevermind,you have already unbrick your PMP and flash new ROM + now you have rooted ROM :victory: .
this works for me,but you need to hold reset button while process ONLY IF you have bricked pmp3384b!!!!
contact me on my mail [email protected] if you need more help.
This is the method to root Micromax Funbook & install CWM recovery.
1) Download the attachment funbook.rar
2) Extract it , it contains CWM recovery & CWM-SuperSU.zip two .rar files
3) Extract CWM recovery to desktop & connect your funbook via usb
4) If the device is not detected then install the ADB driver in the attachment
5) open CWM recovery run Recovery-Install.bat
it has 3 option select 1 to install CWM recovery
select 2 to reboot into recovery
select 3 to quit.
6) then move CWM-SuperSU.zip to internal sd of funbook
7) boot into CWM recovery by pressing menu button & power button simultaneously.
8) select install zip from internal sd card & select the CWM-SuperSU.zip & press power button, select yes to continue.
now you are Rooted
Before installing any custom rom perform a NANDROID backup.
This method is successfully tested by me however use this at your own risk!
How exactly is CWM recovery supposed to be installed on the tablet?
just run the Recovery-Install.bat with micromax funbook connected & ADB driver installed on your computer, it will autometically install CWM recovery on your funbook.
Funbook is Pre-Rooted. No Need to root it again.
Thank You
Thank You..
I Love you...
not working
Its say system remount failed, could not copy recovery image
Please help me I want to install custom rom ,
I am using micromax funbook
Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.
pls help
when i run recovery-install.bat
permission denied can somone pls help
I am Getting The following error
remount failed: Operation not permitted
failed to copy 'recovery.img' to '/data//recovery.img': Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Problem with installation of CWM on Funbook
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.
help me
dushmanta.bgh said:
Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.
Click to expand...
Click to collapse
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it
JetMOD 5.0.1 stuck on Funbook logo, u may tru FunSeries or CyanBook for micromax funbook.Hit Thanks button
For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
INSTALLING CUSTOM RECOVERY
1. Download CWM Recovery 5 ICS.zip
2. Extract it.
These are the requirements fo Flash CWM...
- tablet must be running Android ICS version (4.0.x)
- tablet must have Superuser installed with SU binary loaded
- tablet must have Debugging enabled (ADB drivers included)
Your Funbook is Pre-Rooted, so we'll just proceed with installing Superuser App from Market
3. Go to Play Store and download Superuser.
4. Go to Superuser App > Settings > Su Binary > Install the Binary
5. Reboot.
Now we'll enable USB Debugging
6. Go to Settings > Developer Options > Turn On USB Debugging.
Now we'll increase the screen timeout to prevent screen from getting turned off in the middle of these procedures
7. Go to Settings > Display > Select Never at Sleep.
8. So now connect the USB Cable to your PC and Funbook and you should see USB Debugging Connected notification.
At this point, if this is your first time, you may see Windows trying to find Drivers which will fail ofcourse. Go to Device Management [Press Windows Key + R > Type devmgmt.msc] > Right Click on Unknown Devices > Update Driver Software > Browse My Computer for Driver Software > Both 64bit [Drivers-AllwinnerA10-64bits] and 32bit [Drivers-AllwinnerA10-32bits] Drivers are provided there within a folder named ADB_Drivers under the Recovery Package, so just browse them according to your OS Specification. A screen may appear up saying "The Publisher of this Driver could not be verified", just ignore that and "Continue Anyway".
9. DO NOT TURN ON USB STORAGE. LEAVE IT AS IT IS.
Time to install CWM. There are two methods. One is easy, by running a script and another is using ADB by typing commands. You'll get an _Instructions.txt there which lists both the methods in case you want to try out the 2nd method. Here I'll only cover the easy one i.e. using Script.
10. Run recovery-install.bat [Windows] / recovery-install.sh [Linux] and press any key and just wait and watch the show
11. Within few mins recovery will be installed.
To reboot in Recovery Mode -> Press Options Key and by keeping it pressed, Press Power Key. Release Power Key and then Release Options Key.
12. Reboot.
Code:
=======================================================
| How to control ClockworkMod Recovery 5 |
| |
| VOL+: up |
| VOL-: down |
| POWER: select |
| BACK: back |
=======================================================
Credit goes to tkin
HAVING PROBLEM WHILE INSTALLING CWM?? GETTING PERMISSION DENIED ERROR??
Ok, for those who cannot install CWM from the normal steps(most probably new funbook users having Base 1.2 and ICS 4.0.3) follow these steps.
1. Install Superuser from playstore, update binary, you'll notice it will fail one part(red text), re do the update 2,3 times staright away until all the text become green, no need to reboot phone, but you might want to.
2. Install Android terminal from playstore, in terminal put su and press enter, if you get a warning allow it, if # comes you have root access. If not, re do step one. Don't continue till you get this step correct.
3. Download ES File manager from playstore, go to settings, allow all root access related options and also tick go upto root option.
4. Now start ES file manager, go to root, long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steaps for nandg file.
5. Allow USB debugging from dev options, connect the cable, install drvers.
6. Run the ICS recovery script, wait for it to finish, if it fails then you need to check and set permission again, if all goes well you have successfully installed CWM.
Warning: When setting permissions in ES File Manager make sure the USB cable is not attached, if so it might cause a hard crash and brick the device.
I had used this method to flash CWM on mine and on my friends device, both Base 1.2 and ICS 4.0.3(made in may 2012, the rom build no is: 97F1-D1-H2-H01-MMX.20120512) hence I think funbooks made after may 2012 must use this method, otherwise the script will fails due to permission denial.
Click to expand...
Click to collapse
Worked like a charm for me after setting permissions... Good luck..
Guys try the new Rom
http://forum.xda-developers.com/showthread.php?p=28353648
Sent from my HTC Desire S using xda app-developers app
sudhirrawal20 said:
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it
Click to expand...
Click to collapse
If you want Custom to Jetmod you have to flash yuor ROM into ployer Momo9 Based ROM...
Please use search tool forum before asking question like this.
sukhjit321 said:
For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
Worked like a charm for me after setting permissions... Good luck..
Click to expand...
Click to collapse
dude 'm suck wit a problem!!
I can't change permission of nandg. file and the file name on my funbook is '2012nandg'
I time root browser es explorer
help!! and es explorer gives me on root access to change permission
how to root?
Micromax Funbook ICS 4.0.3 how to root it?
guys i had lots of troubles in installing custom recovery so i tried sparky root but that crappy app can only unroot.
after that i cant update su binary.so used superoneclick it can only root 2.2 and 2.3 now am stuck with rooting.
please guide me to root funbook
neo.abyss said:
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.
Click to expand...
Click to collapse
Try this:_
Right click on 'recovery-install.bat' and run as administrator.....
Unable to install recovey on funbook
Is there anybody to help, i am getting the same error while trying to install recovery on my funbook....
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied to install a custom rom...
this is the easiest way to root
1)download this super user by chainsDD on you funbook
2)open it and update you binary from it and you r done
installing cwm is easy use this guide
**************************
MAY 2013 update [root & unROOT]
**************************
Spice mi-1010 is pre-rooted by company. Check by going to android settings -> about device -> kernel version
BUT the su binary is so modified tat u WONT get root access as device user but u WILL get root access as adb user. So all am gonna do here is install the latest unrestricted su binary thru adb
REMEMBER => do NOT mess with the busybox, its custom modded by spice (its better if u donno wat busybox is &/or how to mess/update it)
*************************
all other rooting methods for mi-1010 (wherever u've found it) r simply WRONG!!! because of wat i've just explained. if u have done them, i suggest u to reinstall the stock firmware again. its available in another post of mine, linked below
*************************
Driver Installation...
1. Install attached PDAnet
2. choose BRAND as OTHER
3. MUST exit the pdanet app that'll auto start (system tray) after installation
*************************
Enable on yr device...
1. setting > developer option > USB debugging
2. setting > developer option > allow mock location
3. setting > security > unknown sources
*************************
start DEVICE MANAGER on PC, keep an eye & plugin mi-1010... a new device sud pop up in device manager. it sud NOT have any EXCLAMATION or QUESTION mark beside
*************************
Download attached [size=+1]sadhu.mi1010.may.2013.rar[/size]
*************************
to root => run [size=+1]ROOT.sadhu.mi1010.may.2013.bat[/size]
to unROOT => run [size=+1]unROOT.sadhu.mi1010.may.2013.bat[/size]
*************************
After ROOTing...
1. download latest "superSU" from play store
2. in superSU settings, install it to SYSTEM
3. dont touch the busybox
*************************
hit THANKS if u appreciate
*************************
sadhu_s60 said:
**************************
MAY 2013 update [root & unROOT]
**************************
Spice mi-1010 is pre-rooted by company. Check by going to android settings -> about device -> kernel version
BUT the su binary is so modified tat u WONT get root access as device user but u WILL get root access as adb user. So all am gonna do here is install the latest unrestricted su binary thru adb
REMEMBER => do NOT mess with the busybox, its custom modded by spice (its better if u donno wat busybox is &/or how to mess/update it)
*************************
all other rooting methods for mi-1010 (wherever u've found it) r simply WRONG!!! because of wat i've just explained. if u have done them, i suggest u to reinstall the stock firmware again. its available in another post of mine, linked below
*************************
Driver Installation...
1. Install attached PDAnet
2. choose BRAND as OTHER
3. MUST exit the pdanet app that'll auto start (system tray) after installation
*************************
Enable on yr device...
1. setting > developer option > USB debugging
2. setting > developer option > allow mock location
3. setting > security > unknown sources
*************************
start DEVICE MANAGER on PC, keep an eye & plugin mi-1010... a new device sud pop up in device manager. it sud NOT have any EXCLAMATION or QUESTION mark beside
*************************
Download attached [size=+1]sadhu.mi1010.may.2013.rar[/size]
*************************
to root => run [size=+1]ROOT.sadhu.mi1010.may.2013.bat[/size]
to unROOT => run [size=+1]unROOT.sadhu.mi1010.may.2013.bat[/size]
*************************
After ROOTing...
1. download latest "superSU" from play store
2. in superSU settings, install it to SYSTEM
3. dont touch the busybox
*************************
hit THANKS if u appreciate
*************************
Click to expand...
Click to collapse
any rom for this tab like cm 10
japjit100 said:
any rom for this tab like cm 10
Click to expand...
Click to collapse
donno bro, am out of country with limited internet
Waiting for Rom development.
adb always shows DEVICE NOT FOUND
I have Spice Mi 1010.. I m trying to root this...
I already installed RockChip Drivers... but, still it says "DEVICE NOT FOUND"
Plz help me on this
U need to forget rockchip & any/everything else.... just do ONLY & EXACTLY as described
**rockchip driver is for FIRMWARE purpose ONLY
sadhu_s60 said:
U need to forget rockchip & any/everything else.... just do ONLY & EXACTLY as described
**rockchip driver is for FIRMWARE purpose ONLY
Click to expand...
Click to collapse
Thanks for the Quick Response....
I m using Windows 7 64bit... ADB from your zip file didnt work for me, it was showing Side-by-side Error(something like that).. Then, I used new AD B driver and then adb command didnt give any ERROR.
The main issue I had is, We need to ADD ADB_USB.INI file. 'coz, google says, all devices cannot be detected from ADB, in that case, we need to find our device Vendor ID and then put it in ini file. Then my device got detected. Now, Everything is fine...
- My Next attempt is to get CWM installed on this device. Then will make a custom ROM. I read that, RK3066 Retina display modules work on any RK3066 device.. I ll give a try.. If you already installed CWM on this device, plz do let me know.
If you dont mind, can u add a Trouble shooting section in First post and add below data:
1. Unzip and Copy Attached file in C:\users\Username\.android folder. So, file is C:\user\Username\.android\adb_usb.ini
2. Then on ADB, run these commands, adb kill-server and adb devices. Now, you device should be displayed.
In case, if you still cant find it, then search for LUSB.EXE file from google and run it, it displays your device Vendor and Product ID's. Then, open attached file(adb_usb.ini)(use Notepad++ or Textpad editor) and add your device Vendor ID in the last line just like I did
Bro, don't get too excited with spice mi1010... it'll die on U someway or the other, before U develop any FW for it... its a piece of junk
Then when it dies & U give it to service, u'll get a completely bashed up piece of junk which U won't feel like using anymore... then u'll tell them to give U a better condition piece & they'll give U a even more bashed up piece & the circle will go on 1month for each transaction... & finally u'll come home & either use sell_the_****_till_it_turns_on.ini or >adb hammer
I wrote all this during the 1st 1 month tat the device worked... after that 2months of service & then sold off
What I wrote WORKED!!! But now obviously there's better tricks
& I don't have the device or any other android to test anymore... I've moved on to windows ecosystem with Asus vivotab smart LTE
sadhu_s60 said:
I wrote all this during the 1st 1 month tat the device worked... after that 2months of service & then sold off
What I wrote WORKED!!! But now obviously there's better tricks
& I don't have the device or any other android to test anymore... I've moved on to windows ecosystem with Asus vivotab smart LTE
Click to expand...
Click to collapse
Ohh.. Thanks for you suggestion.. Anyway, its working good as of now, I will try to use it with care.
I m very glad to say that CWM worked on my device and I already extracted SYSTEM folder from Stock image. Hope I can create a custom Rom now...
Thanks for this mate.. was helpful to root my 2 yrs old device
Hi everyone!
I've got Sony Xperia M4 Aqua 2303 - stock Lollipop, rooted, TWRP Recovery.
I have installed busybox pro, SELinux Mode set to permissive (by SELinuxModeChanger) and newest version of Viper4Android (installed in recovery). I have also version from market.
And my problem is that ask prompt occurs every time I'm opening V4A app, I'm picking Yes>hugh quality>it show that it's installed and want me to reboot. After reboot the same prompt occurs - install driver :/
I've changed tunnel decode, ipa.decode and ipa.use to false.
Am I doing something wrong?
I can't find solution for this problem.
Has anyone solved it?
nekju said:
Hi everyone!
I've got Sony Xperia M4 Aqua 2303 - stock Lollipop, rooted, TWRP Recovery.
I have installed busybox pro, SELinux Mode set to permissive (by SELinuxModeChanger) and newest version of Viper4Android (installed in recovery). I have also version from market.
And my problem is that ask prompt occurs every time I'm opening V4A app, I'm picking Yes>hugh quality>it show that it's installed and want me to reboot. After reboot the same prompt occurs - install driver :/
I've changed tunnel decode, ipa.decode and ipa.use to false.
Am I doing something wrong?
I can't find solution for this problem.
Has anyone solved it?
Click to expand...
Click to collapse
i have the same problem.... sometimes it works and sometimes not....
saadcore said:
i have the same problem.... sometimes it works and sometimes not....
Click to expand...
Click to collapse
Ok i Fixed that Problem
i found a tutorial on the internet but i am not allowed to post links here at this moment ... so you need to google for gizdev
[Guide] Install Viper4Android On Any Lollipop Devices Android 5.0/5.1
i hope you will find it quickly
you need to do it like method 2 explained in that tutorial
but in other steps like explained.
it is explained in this tutorial like:
####################################
Method 2 For Any Lollipop 5.0 And 5.1
####################################
Install Busy Box
Download The Both Zip Files LolliViPER.zip, Viper4A-_Build.Prop-Tweaks_-CWM.zip, Viper4A-_Soundfix-LibFiles_-CWM.zip
Copy To Sd Or Phone Storage
Flash 3 Zip File Via Cwm Or Twrp
Flash First LolliViPER.zip Don’t Reboot Flash Viper4A-_Build.Prop-Tweaks_-CWM.zip Don’t Reboot Viper4A-_Soundfix-LibFiles_-CWM.zip
Clear Dalvik Cache And Cache
Reboot
Open Viper4Android Install Driver Prompt Yes When Ask For Driver Install
###########################
But that didn´t work on my e2303 device....
the only way it worked for me was like setting up fresh stock rom version .167
then install super SU and go to settings. make sure you set super su is enabled on startup.
this is very important cause if this is not set the selinuxpermissive app will not work while v4a will try to install the driver while booting the device.
after that you need to install the selinuxpermissive app mentioned in method 1 in the tutorial. set it to permissive and boot into TWRP.
It is important that busy box is NOT installed at that time.
now install the files from that tutorial in method 2 in that way:
Download The Both Zip Files LolliViPER.zip, Viper4A-_Build.Prop-Tweaks_-CWM.zip, Viper4A-_Soundfix-LibFiles_-CWM.zip
Copy To Sd Or Phone Storage
Flash 3 Zip File Via Cwm Or Twrp
Flash First LolliViPER.zip Don’t Reboot Flash Viper4A-_Build.Prop-Tweaks_-CWM.zip Don’t Reboot Viper4A-_Soundfix-LibFiles_-CWM.zip
Clear Dalvik Cache And Cache
Reboot
Open Viper4Android Install Driver Prompt Yes When Ask For Driver Install
So if V4A will try to install the driver it will detect that busy box is not installed.... it will ask you to install. go and install busy box via V4A.... after the install the driver and reboot and voila !!! we have that ****in low budget Phone sound like a machine from hell !!!
all files needed can be found on the link you searched from google
I hope everybody understands what i mean feel free to ask ...
it took me about 8 hours to find the right way to set it up properly but respect goes to the one who wrote that tutorial found on google
It sounds like you still have Sony ric on your devices.
Sony ric makes the system read only. So any changes you make when in android will not be saved between boots.
Zips still work because those are installed via recovery.
root tutorial using onda v820w ch v1 for example :
--root tools (root.zip) , unzip to c:\
https://drive.google.com/file/d/0BySA4DPrnBM-eXpsdlFzN21jQm8/view?usp=sharing
or
link：http://pan.baidu.com/s/1pLjJhHp
pwd：h79i
--use cmd and BOOTIMG.EXE to unpack boot.img
bootimg.exe --unpack-bootimg
-- use notepad++ open file \initrd\init*.rc , maybe called init.aosp.rc
--search string "class_start core" , add one line on this line's top
start sysinit
-- and then add these lines to bottom and save
service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
disabled
oneshot
-- find another file called default.prop
modify ro.secure=1 to ro.secure=0
--use cmd and bootimg.exe to repack boot.img
bootimg.exe --repack-bootimg
rename boot-new.img to boot.img
after successfully boot into android , go to developer enable OEM Bootloader Lock and usb debug mode
download lastest supersu TWRP / FlashFire installable ZIP , copy to emmc flash or microsd card
http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
unzip root.zip to c:\
-- install driver follow this order and new driver overwrite old driver
iSocUSB-Driver-Setup-1.2.0.exe
IntelAndroidDrvSetup1.5.0.exe
PhoneFlashTool_5.3.2.0_win32.exe
connect otg usb line and hold "volume-" restart tablet or you can find reboot app to enter fastboot mode
cmd run
fastboot flash boot boot.img
fastboot oem unlock
fastboot reboot
hold "volume-" and enter fastboot mode again
-- if twrp file is not working on your tablet , you can find others twrp version , you need try more by yourself
v820w ch twrp file : I use v919 ch twrp on xda forum , rename to twrp.img
--cmd run to enter twrp recovery mode , if tablet don't automatically to restart to enter recovery , you can use volume key to select recovery mode and power key to ensure
fastboot boot twrp.img
connect mouse because touch fuction maybe not work , twrp install supersu recovery zip , root finish
you can use app like foldermount now
if play store has new version supersu , you can update app
but you can't install "binary" from app , it will damage system , if you do , you will find microsd size always 1GB max
so , how to install supersu "binary" , you only need use above step about flash twrp and install lastest recovery zip , after install lastest supersu zip file , on table you run supersu , it will not show any update "binary" request .
p.s. Onda Table Full Gapps Firmware
http://forum.xda-developers.com/android/development/onda-table-gapps-firmware-root-tutorial-t3462774
dual os tablet can use 64gb/128gb microsd card , you need use GUIformat to format to FAT32
dual os all can read/write it
if you have highspeed microsd compatible issue
I suggest you can buy speed < 50 mbps/s sandisk microsd
it work fine on onda tablet
on windows , you can use micorsoft official download win10 version to install
for example onda tablet , you need to do two things
1. backup driverstroe \ FileRepository , after reinstall new win10 , you can use device manager to find lose drivers .
2. backup \system32\drivers\sileadtouch.fw , you need to copy this touch location driver to new win10 .
win10 touch gamepad
china version is free , you don't need to pay to buy 8-axis , function is useless :
https://www.microsoft.com/zh-tw/store/p/微派平板助手/9nblgggzlx51
guide translation here , look attachments pictures : http://forum.xda-developers.com/windows-8-rt/general/tutorial-onsceen-gamepad-touchpad-t3104501
english version is free to try :
https://www.microsoft.com/zh-tw/store/p/touch-anyway/9nblggh31d54
Thank you so much for this detailed guide!
I am having some troubles at the line "fastboot flash boot boot.img": I get "FAILED (remote: Flash failure: Not Found)" on the computer, and "Failed to get partition [the_name]: Not Found" on the tablet screen.
Does anyone know something about this error?
Thanks!
Thanks you for the post! Any idea if I can use this same process to root RemixOS 2.0 on an Onda Obook 11 Plus? I downloaded the RemixOS .zip for the Obook 11 Plus from the Onda site and it seems like the contents are very similar to the process that you describe here...
Or - do you know if I can somehow "convert" the RemixOS partition to run stock Android 5.1? I know that they sell this same device with stock Android as well, but I didn't see an Android .zip file on the Onda site for this device - just the RemixOS .zip file...
Thank you!
Sent from my OBOOK 11 PLUS DUALOS using Tapatalk
Well, not so worried about root now. i already broke my new toy... Was messing with the BIOS brightness level settings (get get lower brightness in RemixOS) and accidentally set GOP Driver to "Disabled" in the BIOS - not I can't get ANY output on the screen or via the HDMI out.. Tried *everything* to try and reset it "blindly", but no luck.. If anyone has any ideas (like how to flash a new BIOS or reset it to defaults), please chime in! Frustrated...
Onda Obook 11 Plus.
Thanks.
Sent from my HP SlateBook 10 x2 PC using Tapatalk
Dificulty
Man, i'm having too much problems to understand exactly what i have to do. I have panic to do something wrong. If you can add some screenshots to post will save my life and my dumbness hahahahah
Thanks a lot
hey i no a way to fix this problem it will cost a little about £10 maybe you need to buy a ch341a flash tool off ebay and the 8 pin clip you will need a computer to plug it into and also your bios .bin file.open up your tablet find the bios chip put the clip on run software load your bios.bin and write it to the chip with software all done good luck
[email protected] said:
hey i no a way to fix this problem it will cost a little about £10 maybe you need to buy a ch341a flash tool off ebay and the 8 pin clip you will need a computer to plug it into and also your bios .bin file.open up your tablet find the bios chip put the clip on run software load your bios.bin and write it to the chip with software all done good luck
Click to expand...
Click to collapse
Thanks - Yeah, I'm aware of that method to re-flash the BIOS, but I have 2 issues with that:
1. Trying to get the damn tablet apart without breaking anything (there isn't a single screw involved here). Considering the cheap materials used on these tablets to begin with, I'd be lucky to get it apart without breaking anything - and honestly, don't really feel like fighting it.
2. More importantly, the BIOS for this device is not available anywhere. The manufacturer has never released it. So if even if I did manage to get the device apart without breaking it, I'd have no BIOS file to flash anyway.
For what I paid for it, I'll write it off as a learning experience and move on. Truth is that I've found a much better device anyway (Chuwi HI10 Pro/Plus). The Onda was OK, but the Chuwi's are MUCH better devices.
But again, thanks for the info - I do appreciate it.
Sent from my Vi10 Plus using Tapatalk
i rooted my onda v80 plus successfully, but now there is no way to access windows again. can anybody tell me how i access windows?
There is no "OS Change" In the android system, the tablet recognices no volume + at the starting process, so i have no chance...
kudi120 said:
i rooted my onda v80 plus successfully, but now there is no way to access windows again. can anybody tell me how i access windows?
There is no "OS Change" In the android system, the tablet recognices no volume + at the starting process, so i have no chance...
Click to expand...
Click to collapse
You can try going in to your bios and check boot mode to see if it says android or windows
I don't know where to start.
I have Cube iwork 8 air. Trying to root but where can i find bootimg which i have to unpack.
Unpacked twrp.img and found init.rc but cannot find line with class_start core, all i have is class_start default#. Is it place where i have to add start sysinit? Where exactly?
Can someone add those lines to file and ad here?
Please explain this as for total noob. Cause for me it looks too complicated like i should do something before which is not include in this tutorial.
Tried iroot, kingroot and this https://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096 method as well, no luck so far.
Thank You in advance.
You can boot Linux or Windows and make a dump of boot partition.
Repacking boot.img error
wgarnett said:
root tutorial using onda v820w ch v1 for example :
]
Click to expand...
Click to collapse
Hi,
I have the onda obook 10 boot.img. Unpacking goes on well including adding the lines instructed using the notepad ++. Repacking however produces the error "set_cmdline <>takes exactly 1 argument <6 given>".
What could I be doing wrong?
First - there is no need to quote the OP fully.
Please upload or attach the 2 original and your 2 changed files (and original boot.img), I will take a look.
Troubles repacking the onda obook 10 boot.img
wgarnett said:
root tutorial using onda v820w ch v1 for example :
]
Click to expand...
Click to collapse
Hi there,
Tried the above rooting method but have a problem repacking the boot image. I get the error "cmdline too many arguments (6 given)". I unpacked stock android boot.img tweaked it and flashed but the tab never booted.
Kindly help
Ivansu said:
Hi there,
Tried the above rooting method but have a problem repacking the boot image. I get the error "cmdline too many arguments (6 given)". I unpacked stock android boot.img tweaked it and flashed but the tab never booted.
Kindly help
Click to expand...
Click to collapse
I already answered you just above your post.
And again, please don't quote the WHOLE message, it is unneeded.
The excessive note on quoting is appreciated. I will take a look on the newbies guide. Attached are the original and modified files. The boot.img size is more than the limit allowed.
Here is the link on Google drive.
https://drive.google.com/file/d/0B7mm7XsgjszUZEY3VEM4ZEVObGc/view?usp=sharing
Thanks
Ivansu said:
The excessive note on quoting is appreciated. I will take a look on the newbies guide. Attached are the original and modified files.
Click to expand...
Click to collapse
modified_files.rar contains no files.
My bad for that. I have it right now
Your changes to default.prop are OK. To init.aosp.rc not:
class_start core
+
+ start sysinit
+ service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
+ disabled
+ oneshot
While I did it like this:
+ start sysinit
class_start core
+ service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
+ disabled
+ oneshot
+ means added lines.
Does it work if you move "start sysinit" before "class_start core"?
Thank you for pointing that error. I modified but still have the same repack error. See the attachment