I have a Motorola Droid X2 with MyMobiler. However, when I connect it to the computer w/ via Wifi, it just gives me a black screen with something that goes like "Press Ctrl+Space" and "Change Keyboard (F4). I have tried all possible solutions: Android - [Setup Device] - [Display] - [Display] - [1. or 2. or 3.]
AND
Android - [Setup Device] - [Display] - [Page]
AND
Android - [Setup Device] - [display] - [display] - [3. Other]
And when I use USB, it does not even detect the phone, even when the phone is ready and connected to the computer.
Somebody please help!
Related
Hello to all,
I create this post, because I have a tablet CEM111 or Flytouch, which does not want to start any more after the change of the Rom, and I do not know any more what to make; thank you for your assistant.
I summarize
Tablet CEM111 ARM11 x220, screen of starting up infotmic " 0.6.1.5 ( 587 ) " when she(it) worked!
Already installed Rom:
- 1-android_2.1_2-6-32-9_infomix_Flytouch II " OK, nothing to say as about origin "
Installed with cable USB M/M and the tool Burntool_75
- 2 - then the Rom Android 2.1 v2.2-v3245 froyo " OK, work, except the webcam "
Installed with microSD and the tool win32diskimager
- 3-la Rom flash10.1-android2.2-20110416-v1001 " flash works, but problem of Ethernet, WiFi and more webcam "
Installed with microSD
- 4-Et the last Rom who in blocked the tablet Zenithink ZT-180 Android 2.2 zt-update
Installed(Settled) with the tool burntool_7.41
I installed files below:
System.pack.img
userdata.pack.img
zImage (1024x600
ZT_Bx.boot
ZT_Bx.spl " I think that his(her,its) this file which my raised by the problems? "
Results : in the started, the screen remains black, the tablet begins vibrating continues only a RESET stops it.
She no boot not any more on the SD
Function menu + power for usb does not work any more the recovery: to power + home either buttons: Home + Round Button of the face of the touch-sensitive screen + Power, nothing either
I tested all the buttons in combination with power no result.
And last attempt, defused(unsettled) the tablet and disconnected the alim. (24 hours) absolutely nothing.
Thank you in advance for all your ideas, I stall ….
Anybody cannot help me??????
On others forum, I found the same problem, but no solutions.
Thus, needs he(it) to conclude tablet from it HS or too technical ??
Hello,
I came across a LG G2 D800 and was looking to fix the screen and basically refurbish the phone. However it doesnt boot past fastboot. I am able to get to the stock "recovery" and usb mode but my computer will not recognize it. All i get is the USB device not recognized window. When the phone gets to fastboot mode it says:
[1700] Fastboot mode started
it does recognize being plugged into usb and will continue to give me 10 more lines with random numbers increasing in the brackets like this:
[1700] Fastboot mode started
[1820] - reset -
[1910] - portchange -
[1970] - reset -
[1980] - portchange -
[2440] - reset -
[2450] - portchange -
[2910] - reset -
[2920] - portchange -
[3380] - reset -
[3390] - portchange -
That is when it will stop printing until i unplug and replug the device from the computer.
My computer is currently running Windows 7 ultimate x64. I have tried different driver versions, different flashing tools, and different modes on the phone. each of them come up as unrecognized.
I have searched all over the web and keep coming across people that can only access fastboot or download mode, never both. Im hoping someone can help me here. Thank you. Any input is appreciated.
what is the device listed at in device manager? QHUSB_9006, QHUSB_9008, G2, Android Phone, etc etc.
It shows up as unknown device with mass storage devices
johnny567 said:
It shows up as unknown device with mass storage devices
Click to expand...
Click to collapse
I ran into both the problems you described, though not at the same time, and eventually found solutions for both.
The long list of tons of drives (and no Download mode) is fairly easy to fix thanks to the solution at:
http://forum.xda-developers.com/lg-...lcomm-9006-t2939627/post56739916#post56739916
To simplify, just download his premade package for the D800 (he lists other versions in the description of his YouTube video) at https://mega.nz/#!mN0SkDpb!1R36L-F05b8LxXXzcGwBctKgLEACz88X5OuIqwNdezM
and also download and install the Qualcomm drivers from here:
http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar
In the instructions he shows Computer Management, a Windows tool. If you are unfamiliar, you can find it under Control Panel -> System and Security -> Administrative tools (click on it)
Info:
http://bbs.phoenixstudio.org/en/showthread.php?tid=4710
Update Details
The following bugs has been fixed:
- Realtek network adapter causes device restart when connecting to Wi-Fi.
- Broadcom network adapter causes CapsLock light flashing when connecting to Wi-Fi.
- Unable to enter Phoenix OS after installation.
- Unable to restart or shut down.
Download:
Exe
http://files.phoenixos.com/os/PhoenixOSInstaller-v1.2.2-265.exe
ISO
http://files.phoenixos.com/os/PhoenixOSInstaller-v1.2.2-265.iso
i won a xperia c. one day the battery drained and after that its not turning on.
device history
in starting i used to get sony logo and pressing power+volume down button used to get me the green led light so i tried to flash it with xperia companion and wmshua but it got disconnected from time to time, nothing worked, i read every thread related to xperia c, a lot of guys had that problem. but now i am only getting red led light while charging and no sony logo and when i am connecting to pc it recognizes it for a second and thn disconnects. and now xperia companion and wmshua doest recognize my device. red led light also gets stable for few minutes thn blink once and thn again remain stable for few minutes. now i cant get green led light with any combination of buttons and i used sony xperia flasher, it shows that device is connected with usb debugging off and thn again shows device is disconnected. what should i do? any advice will be appreciated. is my battery gone bad or any other hardware damage or is it a software problem.......i am attaching the log of xperia flasher
12/040/2017 03:40:55 - INFO - <- This level is successfully initialized
12/040/2017 03:40:55 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
12/041/2017 03:41:03 - INFO - Device connected with USB debugging off
12/041/2017 03:41:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
12/041/2017 03:41:20 - INFO - Device disconnected
12/041/2017 03:41:22 - INFO - Device connected with USB debugging off
12/041/2017 03:41:22 - INFO - For 2011 devices line, be sure you are not in MTP mode
it get connected and disconnected like this only and when i check for driver...this is shown
12/041/2017 03:41:25 - INFO - List of connected devices (Device Id) :
12/041/2017 03:41:25 - INFO - - USB\VID_0FCE&PID_D1A0\5&3279CB56&0&1 Driver installed : true
12/041/2017 03:41:25 - INFO - List of ADB devices :
12/041/2017 03:41:25 - INFO - - none
12/041/2017 03:41:25 - INFO - List of fastboot devices :
12/041/2017 03:41:25 - INFO - - none
Hello, long story short, I'm trying to downgrade from Android 8.0 to Android 6.1.1 so I can back up my DRM keys, this is where I got and it's not doing anything more, should I wait or what ?
18/047/2018 20:47:36 - INFO - Selected Bundle for Sony Xperia XZ(F8331). FW release : 39.0.A.3.30_R6B. Customization : Central Europe 1 Generic_1304-9023
18/047/2018 20:47:36 - INFO - Preparing files for flashing
18/049/2018 20:49:03 - INFO - Please connect your device into flashmode.
18/050/2018 20:50:31 - INFO - Using Gordon gate drivers version 3.1.0.0
18/050/2018 20:50:31 - INFO - Opening device for R/W
18/050/2018 20:50:36 - INFO - Device connected with USB debugging on
18/050/2018 20:50:36 - ERROR - Cannot identify your device.
18/050/2018 20:50:36 - INFO - Selecting from user input
18/051/2018 20:51:14 - INFO - Connected device : F83XX
18/051/2018 20:51:14 - INFO - Installed version of busybox : N/A
18/051/2018 20:51:14 - INFO - Android version : / kernel version : / Platform : 32bits / Build number :
18/051/2018 20:51:14 - INFO - Phone in recovery mode
18/051/2018 20:51:14 - INFO - Root Access Allowed
18/051/2018 20:51:15 - INFO - Device connected in flash mode
@QattosOrion , From your logs it seems you are not connecting the phone properly. completely power off your phone and when flashtool asks to plug the phone keep pressing vol-down and plug the cable, don't touch the pwr button, flashing should start automatically.
ptmaniac said:
@QattosOrion , From your logs it seems you are not connecting the phone properly. completely power off your phone and when flashtool asks to plug the phone keep pressing vol-down and plug the cable, don't touch the pwr button, flashing should start automatically.
Click to expand...
Click to collapse
Thanks a lot, it's fixed now.