Today i tried to install the official Kitkat Rom in the Note 10.1
I have the Note 10.1 Wifi N-8010 but with mistake i installed (flashed) the Version for the N-8000
And some hours later i tried to install the right rom for my device.\
But the Software (Odin) wont flash.
I checked that this is the right version
And i redownloaded Odin.
Please Help ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Now I get this COde from Odin
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
I NEED YOUR HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!
PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Problem is with the sboot.bin, I had this problem too (more or less).
I rebooted in odin-mode and flashed the N8010XXUCMA5 official firmware (4.1.2) over it, using Odin 3.07.
At that point, my tablet booted again.
Then I flashed the N8010XXUDNG1_N8010LUXDNG1_LUX official firmware (4.4.2) also with odin 3.07.
Mind to use the official Samsung USB-cable, one attempt failed here when I used an aftermarket cable.
Also don't use a USB-hub but plug cable directly in pc. Odin 3.09 gave me problems too.
Related
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even get a green light in 3.04 - just a blue light. In 1.85 I get a yellow light.
I see this on my phone:
SECURE CHECK FAIL: recovery
I see this on the phone's screen twice, as I tried to flash it with ODIN 3.04 and 1.85.
Any ideas? Could this be a direct result of the most recent software update?
Thanks in advance for any light shed on this issue.
Since I have a low post count I am unable to post the link, but it was on droidviews.
djcronos said:
Since I have a low post count I am unable to post the link, but it was on droidviews.
Click to expand...
Click to collapse
As you do not have I9300 any firmware root from this I9300 forum may brick your not a I9300 phone ,read the sticky top of the page please .
jje
Jee speaks the truth. Even though you have a galaxy S3 the original s3 in Europe is not the same as here in the states (i535). I went into the development section of xda in the i535 Verizon section and d/l the tar file foe my phone. Worked great with Odin
Sent from my SCH-I535 using Tapatalk 2
djcronos said:
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
...
SECURE CHECK FAIL: recovery
Click to expand...
Click to collapse
Same thing here.
Verizon GS3 sch-I535
Android version: 4.1.2
Build: JZO54K.I535VRBMB1
It fails after the build chain while trying to flash recovery.
Any help would be appreciated!
http://forum.xda-developers.com/showthread.php?t=2046439
Try this method!
djcronos said:
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even get a green light in 3.04 - just a blue light. In 1.85 I get a yellow light.
I see this on my phone:
SECURE CHECK FAIL: recovery
I see this on the phone's screen twice, as I tried to flash it with ODIN 3.04 and 1.85.
Any ideas? Could this be a direct result of the most recent software update?
Thanks in advance for any light shed on this issue.
Click to expand...
Click to collapse
here is "how to" just to root your new phone without unlocking and flashing bootloader etc...check post#6
http://forum.xda-developers.com/show...9#post39980019
djteotancolis said:
http://forum.xda-developers.com/showthread.php?t=2046439
Try this method!
Click to expand...
Click to collapse
This works, I am running 4.1.2 and was able to root, unlock and flash. Very easy
Sent from my SCH-I535 using Tapatalk 2
Hello. Sorry for my enlgish.
Theres a soft-bricked SM-P900, I can normally open download mode. (But on normal system loading it asking for Kies)
(Samsung Galaxy Note Pro 12.2 WiFi SM-P900)
No ROM installed now. I just can't install it.
Here's the Odin log:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's always stucks on "system.img" in ANY .tar I try to flash.
Yesterday, it could power on. But now it's not powering on at all. I hope this is because of battery charge.
===UPD: Yes, it was because of battery charge. Now it's powered on
===UPD2: Now it's powered off again and I can't power it on, what the hell?...
What should I do, guys? Help, please!
Thread closed / Duplicate
Hey guys,
I'm trying to root my S6 (Canada/Bell Provider/SM-G920W8) and running into the following issue,
Enabled Developer options and USB debugging
Downloaded CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Downloaded and installed the latest drivers
Turned off and back on into Download mode
Opened Odin3 v3.10 as Administrator
Selected AP and added CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Clicked start
and I'm getting the following from Odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not quite sure how fix the issue. Any help would be great.
Thanks
amirbehain said:
Hey guys,
I'm trying to root my S6 (Canada/Bell Provider/SM-G920W8) and running into the following issue,
Enabled Developer options and USB debugging
Downloaded CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Downloaded and installed the latest drivers
Turned off and back on into Download mode
Opened Odin3 v3.10 as Administrator
Selected AP and added CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Clicked start
and I'm getting the following from Odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not quite sure how fix the issue. Any help would be great.
Thanks
Click to expand...
Click to collapse
im having the same issue did you figure out how to fix it and root ?
Trying to root my galaxy Samsung s6 g920w8 ? Can anyone help ?
rootman81 said:
Trying to root my galaxy Samsung s6 g920w8 ? Can anyone help ?
Click to expand...
Click to collapse
have any of you tried Odin 3.13.1?
So, I know there are ways to flash different firmware on to each Galaxy S7, Metro and T-Mobile are pretty much the most similar of each version. What I'm trying to do is make it so my G S7 is stock T-Mobile so that I can update it to the Nougat Beta. I'm sort of impatient lol. Here's the errors I'm getting:
This one is in Odin and I'm using the modified version that I used originally to root my S7 which BTW is back to stock unrooted.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone shows this in RED:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: aboot
I'm not sure what the problem is, I have my drivers installed, I have debugging checked and I'm using an HTC usb cord only because they are better with data transfers than the stock Samsung cord in my experience. I'm not sure what I'm doing wrong.
Help? :fingers-crossed:
jawshdarnit said:
So, I know there are ways to flash different firmware on to each Galaxy S7, Metro and T-Mobile are pretty much the most similar of each version. What I'm trying to do is make it so my G S7 is stock T-Mobile so that I can update it to the Nougat Beta. I'm sort of impatient lol. Here's the errors I'm getting:
This one is in Odin and I'm using the modified version that I used originally to root my S7 which BTW is back to stock unrooted.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone shows this in RED:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: aboot
I'm not sure what the problem is, I have my drivers installed, I have debugging checked and I'm using an HTC usb cord only because they are better with data transfers than the stock Samsung cord in my experience. I'm not sure what I'm doing wrong.
Help? :fingers-crossed:
Click to expand...
Click to collapse
Use the unmodified version
Okay will do. I'll post again if any issues arise.
kitila said:
Use the unmodified version
Click to expand...
Click to collapse
Used the most up to date version and still getting same error message.
kitila said:
Use the unmodified version
Click to expand...
Click to collapse
I downloaded the zip file from sammobile and used the newest version of Odin and it worked! Thank you so much for your help sir! :good:
Hey!
I decided to install the Resurrection Remix rom on my Samsung J7 2016 (SM-J710FN). But after i flashed it I noticed my IMEI and baseband had disappeared. My phone doesn't recognize my SIM card and my cellular data no longer works. I didn't have a efs backup too. I might have wiped the system partition in my twrp recovery.
If you could help me I would really appreciate it.
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
RS.85243 said:
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
Click to expand...
Click to collapse
I tried to but each time I try to flash the bootloader an error comes out.
Ratbug said:
I tried to but each time I try to flash the bootloader an error comes out.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Ratbug said:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Click to expand...
Click to collapse
find the version of official firmware you had on it last, if you try to flash the boot with an older version of the firmware it will fail. Here is a link to the latest firmware for the 710fn from India https://drive.google.com/open?id=1f_C8REO2ZRwiqBegUGEnUer9DcWy9adR
if i try it this way i get an "PIT" error on my phone in ODIN MODE
Never mind. I took the phone to a Samsung shop and they fixed it.
i have the same problem and I can't find the right FW.
all i know is, that I previously had the last available OTA installed.
when trying to flash the FW given above, i get the error: secure check failed (pit)
I have the same problem now. I've tried many available firmware versions and none of them work. Is there anything I can do to make the phone usable again?