Database Info

[Safestrap]UnofficalV.2 **Safe strap is having issues please be patient**

*please hold off use of safe strap until further notice. I promise you we are hard at work on it************************************************************There is a new version at the bottom of the post. Please uninstall recovery from with in your currently installed v.1 then uninstall safestrap app. Download and install v.2 and install recovery. If you already have a safe system installed you will need to reflash the zip and wipe data/factory reset. Thanks Jim for the fix! There are now 2 different versions 1 for those not running jims webtop hack and one for those of you that are. Please download the safestrap appropriate for your setup at the bottom of the page. ********************************************************************************************************************************************************************************
What works?
-Everything except mounting usb in recovery.
-Cant seem to format safe system /data
Here it is!!! Our very own Unofficial safestrap recovery!
Whats this mean? Custom rom's!!! CM7 CM9 etc! And no more fxz or cwm on every boot just to save from a softbrick.
How'd we do it?
This was a pain in the A**, Jimbridgeman and myself have worked our butts off on this. We changed the recovery.fstab around so that we are able to use the sd card as a mount point to install the /system partition as well as a separate partition for /data. So in laymen's terms, were booting from the sd.
How to Install -(From Windows)
(Partition sizes are up to you but ext3 partition should be no less then 350mb and the second fat partition should be not less then 500mb)
1.Backup your sdcard
2.Format your sdcard from your phone under settings-storage
3.Put your sdcard into some kind of card reader and place into computer
4.Download, install, and open Mini Tool http://www.partitionwizard.com/free-partition-manager.html
5. Right click on your sd card, click resize
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Re size so that you have at least 850mb left "Unallocated"
7.Click OK
8.Click apply changes
9.Right click on unallocated partition and select create
10. Click Yes
11.I went with 1gb, this is the data partition, It needs to be at least 500mb and your settings must match mine. Primary,Fat32
12.Click apply changes
13.Right click on unallocated space, select create
14.Click Yes
15. This is the System partition and needs to be at least 350mb, Your settings must match mine. Ext3,Primay
16.Click on apply changes.
17.Click Yes.
18.You are all done! Should look something like this.
Now to install the safestrap
http://db.tt/y6xKucmg (V.2)
http://db.tt/RzY6VJTi (V.2-Running webtob hack)
Special thanks to jimbridgeman and hashcode. (JIM... I LOVE YOU!!!)
Head down below and click the thanks button, then head over to jimbridgeman's profile and click thanks again!
**You do not need to quick toggle safe system to wipe/format anymore in v.2**

Omg yes
Sent from my MB865 using XDA App

One noob question so the safe system is on the mobile internal memory or on the SD card? If on SD card is it fast enough not to cause performance issues?
Sent from my MB865 using XDA App

alcatel444 said:
One noob question so the safe system is on the mobile internal memory or on the SD card? If on SD card is it fast enough not to cause performance issues?
Sent from my MB865 using XDA App
Click to expand...
Click to collapse
The safe system is stored to the sd card, no real performance issues.. 5500ish in antutu running cm7 for the droid 3!

And with that strap i can remove my main stock rom not just install a 2nd rom on sd card ?
Thanks alot to you and jim and hashcode for your grest work i will make sure to press the thanks button alot when i get on my pc
Sent from my MB865 using XDA App

I'm assuming that like with the razr if you are using the bootstrap with on boot you have to remove it before installing the safe strap version?

Thank you
I knew it was only a matter of time!!!!!!
Thank you guys

A link worth sharing http://hash-of-codes.blogspot.com/p/how-to-safestrap.html , this is the original safestrap for D3 and RAZR done by hashcode , take a look at his blog to understand more about safestrap if you are a noob like me.
but there is only one question i need to understand using this hack can we install roms on the 1st system ( device memory ) or just on the 2nd system ( SD Card ) ?

This is what I have been using instead of the bootstrap, to use my custom ROMS... it will allow you to use your paid version of CWM the way it should be used. You can now go into CWM and select boot to CWM or flash from sdcard while still in android, and it will boot you into CWM and start flashing....
Thanks for all your hard work!
Jim
Sent from my MB865 using xda premium

So essentially, this is a dual boot system of sorts? This allows me to install a custom ROM and run it in Safe mode then go back to my factory ROM by turning off Safe mode?

lilhaiti said:
So essentially, this is a dual boot system of sorts? This allows me to install a custom ROM and run it in Safe mode then go back to my factory ROM by turning off Safe mode?
Click to expand...
Click to collapse
Yes, that pretty much sums it up.

Will this work for something like, flashing a them to the stock rom on the internal system?

same question
lilhaiti said:
Will this work for something like, flashing a them to the stock rom on the internal system?
Click to expand...
Click to collapse
Yea i have same question will this hack help us flash a rom on internal system or just on the 2nd boot

alcatel444 said:
Yea i have same question will this hack help us flash a rom on internal system or just on the 2nd boot
Click to expand...
Click to collapse
This will not work to flash ANYTHING to your internal system. It will only flash to the safe system.

Got it thanks!!!

MOD please sticky this thread.

lfaber06 said:
MOD please sticky this thread.
Click to expand...
Click to collapse
great works，and thanks for that

lfaber06 said:
*************************************************************I found a bug in the safestrap that prevents us from being able to wipe the * *dalvik cache, I beleive it is in the way i set up the partitions, I will have a re-work and a new apk out by tomorrow night hopefully********************* 1/4/2010*****************************************************************************************************************
Click to expand...
Click to collapse
great work man
but is it ... 2012 ?

Should I wait to setup safestrap until you get this fixed, or can I go ahead with it and just replace the .apk later?

mathk said:
great work man
but is it ... 2012 ?
Click to expand...
Click to collapse
Opps... lol
Calundle said:
Should I wait to setup safestrap until you get this fixed, or can I go ahead with it and just replace the .apk later?
Click to expand...
Click to collapse
I'm working on it now so it'd probably be easier to wait.

[ MOD-CWM FLASHABLE ZIP ] SWAP eMMC and EXTSD for Micromax Funbook

IM NOT RESPONSIBLE IF THIS MOD DO ANY HARM TO UR DEVICE,SDCARD,INTERNAL STORAGE.
ONLY PROCEED IF U KNOW WHAT U R DOING.​File pulled from "Micromax FunBook running Ployer Momo9" Firmware,and modified by me.
This mod will allow u to interchange ur eMMC (by default internalstorage-2GB onboard) and EXTSD (external memory card),so that u can install large data games and many more.
Direct to installation point
1) Download "SWAP_SCRIPT_FOR_EXTSD_AND_SDCARD.zip" and reboot into recovery
2) Mount all available options in "Mounts and Storage" menu in CWM
[Important step,otherwise cwm will say the mod is successfully installed and u will not see the swap of the memories]
3) Flash the zip, reboot and enjoy.
To Revert the changes:
1) Download "RESTORE_SCRIPT_FOR_SDCARD_AND_EXTSD.zip" and reboot into recovery
2) Mount all available options in "Mounts and Storage" menu in CWM
[Important step,otherwise cwm will say the mod is successfully installed and u will not see the swap of the memories]
3) Flash the zip, reboot and enjoy.
SCREENSHOT: With 8 GB Class 4 Memory Card
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tested on:
-> Micromax Funbook running momo ployer9 firmware
-> CWMR v5.5.0.4

Reserved
Reserved !!!

Awesome!

Nihar.G said:
Awesome!
Click to expand...
Click to collapse
try it ...

Swapped successfully but after swapping my internal SD shows damaged..I have some useful data and this alternative didn't worked for me

Sorry, I'm a noob.
Where do I copy the downloaded file?
How do I boot into recovery?
Will this work with stock ROM?

I tried running it on HTC Chacha,as i am running CM9 on Micromax Funbook and HTC Chacha both,i tried installing it on Funbook,it was installed on the first time only..as for HTC Chacaha,i am getting error:installation aborted,please help me on that.

Problem- FB not detecting USB Cable
Have i done anything wrong?
I transferrred the script file in my external sd card.. followed ur instructions exaclty but still the memory is 1.83 gb.. i have a 8 gb card installed.
Another problem is that i cannot access my fb through usb now.. the option "turn on usb" does not pop up when i connect the usb..
Please help.. have i done something wrong?
Best,
Amit

plz reply
can someone plz reply..
amitsharma37428 said:
Have i done anything wrong?
I transferrred the script file in my external sd card.. followed ur instructions exaclty but still the memory is 1.83 gb.. i have a 8 gb card installed.
Another problem is that i cannot access my fb through usb now.. the option "turn on usb" does not pop up when i connect the usb..
Please help.. have i done something wrong?
Best,
Amit
Click to expand...
Click to collapse

amitsharma37428 said:
can someone plz reply..
Click to expand...
Click to collapse
I do have the same problem. I am using Kangbook for my FB and it is working awesome but the only problem i have got at the moment is my internal SD card is not getting detected, although its showing the capacity and free space, neither i am able to download any file from the internet nor i am getting an option for the FB to get detected for the USB Storage mode when i connect it to the PC on Windows or on Linux.

Thank you for replying
Thanks for the reply man..
I hope you rectify the problem soon.. I think i will operate my Funbook with the stock ROM for some time. I will wait for a custom ROM in which everything is working..
Hope the developers will fix all the bugs..
Tell me something after u upload a custom ROM can you revert back on the stock ROM without any problems????
Best,
Amit
abhee386 said:
I do have the same problem. I am using Kangbook for my FB and it is working awesome but the only problem i have got at the moment is my internal SD card is not getting detected, although its showing the capacity and free space, neither i am able to download any file from the internet nor i am getting an option for the FB to get detected for the USB Storage mode when i connect it to the PC on Windows or on Linux.
Click to expand...
Click to collapse

Tata Photon Working?
Also is Tata Photon working on Kangbook??
Thanks,
Amit
amitsharma37428 said:
Thanks for the reply man..
I hope you rectify the problem soon.. I think i will operate my Funbook with the stock ROM for some time. I will wait for a custom ROM in which everything is working..
Hope the developers will fix all the bugs..
Tell me something after u upload a custom ROM can you revert back on the stock ROM without any problems????
Best,
Amit
Click to expand...
Click to collapse

thank's working fine on my tab. i just copy the vold.fstab on my etc folder then restart and its working. no problem at all.

I can't get my SD card working, whenever i select choose zip from sd card,it shows can't mount sd card,also..earlier my sd card showed 29.84 GB something but now it is showing only 25 GB,where do rest 4GB go?

help with GB rom
hey ,
i just moved to GB(2.3.4) rom for momo9 on mm funbook cuz of games not working on ICS, (asphalt 7, frontline commando, etc etc.)
this script does not working in GB. can you tell me how can i install this in GB rom ??
thanks !!!

CM 13 for Lenovo A536 custom rom [android 6.0]

CM 13 for Lenovo A536 custom rom [android 6.0][marshmallow]​by lenovoved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"still in beta"
language:multilanguage (including english)
CM 13 - Marshmallow All Android 6.0.1​screenshots:
We aspire to new versions of Android without the help of the manufacturer.​
It works fairly decent.
critical bugs:
-Bluetooth
-GPS
-Perhaps even something he had not noticed.
Click to expand...
Click to collapse
Setting:
To use an SD card to copy/move all the data on a PC or somewhere else:
-dropdown the noticedrawer
-Choose " Portable medi
Click to expand...
Click to collapse
a "
follow the instructions
.- If you do not see the SIM-card (for some reason when I first installed, I installed the second time the problem was not there):
-Download the utility SELinuxModeChanger_v3.2_release.apk (669.81 KB ) - Give Root rights to it . -
Toggle SELunix mode (can hang phone, distorting the battery for a while)
-Removes utility -
Rejoice .
Gapps: do not load/boot to system without flashing gapps .
If for some reason does not work online, and data transfer is enabled , turn airplane mode on or off. Internet work.
Click to expand...
Click to collapse
1. Download the files to the SD card
2. Loaded in recovery mod Philz or TWRP /cwm
3. Make a backup
4. Make wipes (data,cache,system)
5. Select the each zip file one by one for installation
a)firstly flash rom
b)then after flash gapps
(for storage either choose one of them)
Waiting for the end, reboot.
Click to expand...
Click to collapse
Download:
ROM-HERE
Click to expand...
Click to collapse

getting error that installation aborted?...
can you help me please. send me an email please.
[email protected]

1985djfs.apk said:
getting error that installation aborted?...
can you help me please. send me an email please.
[email protected]
Click to expand...
Click to collapse
may be your package is corrupted during download.
(extract zip with winrar extractor , check whether it shows an error)
redownload.

IMEI
Hello, how do I set IMEI please?

sebiiik said:
Hello, how do I set IMEI please?
Click to expand...
Click to collapse
use this method:http://forum.xda-developers.com/showthread.php?t=2399037
or
droid tool method

CM 13 [android 6.0.1]by lenovoved
CM 13 [android 6.0.1]by lenovoved, installation error. Not working!

CM 13 [android 6.0.1]by lenovoved
Nobody knows why crashes during installation? Thank you.

adrianp1955 said:
Nobody knows why crashes during installation? Thank you.
Click to expand...
Click to collapse
sometime rar file get corrupted during download?
what recovery are you using?
can you give me error log details

SIM card not detected, even after switching SELinux. Also I can't access internal memory with any sort of File Explorer (Using ES). Any solutions pls? I have also read somewhere that flashing the ROM with a different version of TWRP might fix this problem.

Using TWRP. Follow the instructions and after a while crashes. I downloaded from somewhere else and do the same. Thank you.

While toggling selinux mode .. Phone hangs... N heats up .. A lot ... For more than hour.... BT when removed battery N restarted the mode was same ... Tried many times ... BT no Sol..

Downloading
Feedback later. Thanks

Apparently a team of porters over at MTKRoms beat you to it. They fixed the critical bugs and are still fixing bugs left and right. I was sad when I saw that Bluetooth was still a critical bug in the only CM13 that was built specifically for the Lenovo A536.
I hope it's worth it, if auto-rotate works and the home button is not bugged out.

prateetsingh said:
While toggling selinux mode .. Phone hangs... N heats up .. A lot ... For more than hour.... BT when removed battery N restarted the mode was same ... Tried many times ... BT no Sol..
Click to expand...
Click to collapse
Same here +1
Sent from my Lenovo A536 using Tapatalk

Bluetooth is buggy..
Sent from my Lenovo A536 using XDA Labs

adoptable storage problem
CAN'T ADOPT SD CARD AS INTERNAL STORAGE. EVERY TIME WHEN I TRY IT, IT SAYS I HAVE SLOW SD CARD THOUGH I HAVE CLASS 10 SANDISK CARD. AND AT THE END IT CORRUPTS MY SD CARD, SO I HAVE TO AGAIN MAKE IT PORTABLE TO USE IT. :crying:

I encoutered the following issues after installing CM13 on my lenovo a536
I encoutered the following issues after installing CM13 on my lenovo a536
> The phone doesnt charge when power off
> there is no way to close one of the two SIM cards and leave the other one on ... the SIM control apps in google play also dont work such way
> the camera sometimes stops and i get the message can't connect to camera and the phone needs to be rebooted to solve the problem
>>> Is there any permanent solution to these problems ???
[email protected]
---------- Post added at 06:14 PM ---------- Previous post was at 06:09 PM ----------
sneh01 said:
CAN'T ADOPT SD CARD AS INTERNAL STORAGE. EVERY TIME WHEN I TRY IT, IT SAYS I HAVE SLOW SD CARD THOUGH I HAVE CLASS 10 SANDISK CARD. AND AT THE END IT CORRUPTS MY SD CARD, SO I HAVE TO AGAIN MAKE IT PORTABLE TO USE IT. :crying:
Click to expand...
Click to collapse
I have the same problem tooo >>> ???? is there any solution ?????

When will it be stable ?
When will you fix all critical bugs and make it working just like cm 12.1 ?
Btw thanks for your effort !

CM12.1 for lenovo a536[stable][no bugs]

CM12.1 for lenovo a536 by lenovoved​
CM12.1 Build on 11/04/2016
language:multilanguage (including english)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NO BUGS
Click to expand...
Click to collapse
1. Download the files to the SD card
2. Loaded in recovery mod Philz or TWRP /cwm
3. Make a backup
4. Make wipes (data,cache,system)
5. Select the each zip file one by one for installation
a)firstly flash rom
b)then after flash gapps
(for storage either choose one of them)
Waiting for the end, reboot.
Click to expand...
Click to collapse
DOWNLOAD:
ROM HERE
GAPPS HERE
Patch SD card by default is placed after the first run of the system
patch SD card by default + init.d & energy savings
Click to expand...
Click to collapse

bootlop
anyone ca install this rom? im bootlop

Not installing it says:
detected filesystem ext4 for /dev/block/mmcblk0p5
detected filesystem ext4 for /dev/block/mmcblk0p7
Error:Status 7
Installation aborted.

KZSPGE said:
Not installing it says:
detected filesystem ext4 for /dev/block/mmcblk0p5
detected filesystem ext4 for /dev/block/mmcblk0p7
Error:Status 7
Installation aborted.
Click to expand...
Click to collapse
Use philz recovery
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
rejul said:
CM12.1 for lenovo a536 by lenovoved​
CM12.1 Build on 11/04/2016
language:multilanguage (including english)
DOWNLOAD:
Click to expand...
Click to collapse
I'm getting network drop issue sometimes. Once it start, whatever number i dial, network drops. Then i have to reinstall the ROM. This is the only bug i'm facing. Please give some solution...

How much internal memory does it have? 5gb like the stock (or Miui) rom?

DjalieBlogger said:
anyone ca install this rom? im bootlop
Click to expand...
Click to collapse
Well... I'm having a bootloop too... :| :| .Wiped everything then installed it fresh. It doesn't work ... (installed with latest TWRP)

[emoji106] it is really amazing
Is it there any update in future would make Security (Enforcing) ?
Thanks
Sent from my Lenovo A536 using Tapatalk

I have issue when I reboot my phone
Sim didn't appear anymore
And to solve this issue I should do clear cache
Is there any update to solve it ?
Sent from my Lenovo A536 using Tapatalk

After I test it. I encountered one bug. When I plugged-in the USB Cable it allows me to choose among Camera, MTP, USB Debugging and Charging Only.
When I clicked the Charging Only, the next time you plugin your USB again you won't find the other options again like Camera, MTP, USB Debugging.
I tried to click the kernel version to access the USB Debugging mode but no lock.
I'm still looking for a way to fix this problem.

Flashed it successfully!
I just wanted to thank the guy who made this custom rom for lenovo a536 and this is my first flashed rom (btw i am 16 and it took me almost 4 hours to figure everything out and solve the problems), cheers , keep it updated as long as posible :fingers-crossed::good:

Fixed bootloop
Reyul, thank you for sharing this great ROM! For now, all is working well!
One recommendation, in HOW TO, add clearer explain for installing. I had understood like i need to flash all zips from once, without restarting. This was causing a bootloop first time. Then i had formated /cache, dalvik, /system and /data and install it again. After every zip i had formated dalvik cache. And it turns on!!
Very big greetings~!

sim data net is it working............? in my phone its not working

I have question , why if I shutdown the phone and turn in on again my Imei lose and sim card not detected and if I reboot everything is work again?
and if I download Asphalt 8 this is can't open always FC ?

Well guys, after a two month of usage, i can say it's pretty good. Everything works good and no major bugs. But there is few issues:
- Youtube app:
Youtube app doesn't working good. It really laggy and sound is going faster than video, also video stucks on some part of clip. I tried to unistall it and to delete datas.
- Battery:
When phone shutdowns by battery empty state, there is no valid changing animation. Only battery with the bolt, and no procent. Btw., i can't even turn phone on while it's not changed for 3%. That can take to 10 minutes... But that is not issue for this ROM only, there is that on stock also. Else, battery keeps about day, day and half.
- Signal on wakeup:
When phone shutdowns, and when i turn it on after changing, there is no signal, SIM card is not registered. I need to reboot it again to get it work. This is happens everytime.
- Mobile data:
this nervous me the most... I turn it on, and after 1-2-3 minutes, it's turns off automatically. Doesn't matter what i do.

milosb793 said:
Reyul, thank you for sharing this great ROM! For now, all is working well!
One recommendation, in HOW TO, add clearer explain for installing. I had understood like i need to flash all zips from once, without restarting. This was causing a bootloop first time. Then i had formated /cache, dalvik, /system and /data and install it again. After every zip i had formated dalvik cache. And it turns on!!
Very big greetings~!
Click to expand...
Click to collapse
sorry for that, i will update it.

techGuy7 said:
I just wanted to thank the guy who made this custom rom for lenovo a536 and this is my first flashed rom (btw i am 16 and it took me almost 4 hours to figure everything out and solve the problems), cheers , keep it updated as long as posible :fingers-crossed::good:
Click to expand...
Click to collapse
its most known lenovoved group

does it support OTG ??

The link for rom and gapps says there is no such page.....help plz

need infocus m680 lollipop flash file
dear,
any body can help me to get infocus m680 lollipop android flash file ?
now mobile is android 6.0
i dont like it this 6.0 version.
i search website but there is no use
please help to get lollipop version for infocus m680
link u may send to : [email protected]

[MM290][MT6592][ROM][CM13][6.0.1_r30] Temasek's UNOFFICIAL Build v7.0

temasek's unofficial cm13 build for mmx canvas knight cameo(mt6592)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a ported rom based on cm13 by @temasek for our device Micromax A290
Temasek ROM for MT6592 is an aftermarket ROM based on Android M/CM13, This ROM has top of the line optimizations and awesome performance, One of the smoothest ROM I have used, not only does it come with performance, it comes with loads of awesome customizations and features.
FEATURES
Marshmallow 6.0.1_r30
Ambient Display
Floating Windows
Statusbar Customization
Clock Alignment
Battery Settings
Charging Animation
Battery colour
Battery bar
Statusbar greeting
Network Traffic
Breathing Notification
and many more that comes.
BUGS​
Proximity Sensor
sadly no fix found yet, use sensor disabler(Xposed Module) to disable proximity.
You tell.
INSTRUCTIONS​
I recommend using Philz recovery
Place the downloaded file in internal storage.
Boot into recovery , Philz or TWRP.
Goto Wipe and Format option(Philz)
press clean to install a new rom, before that take a backup first.
Just to be safe(optional) Goto mount/storage and format system , data, cache.
After that flash the downloaded file.
After flashing immediately flash gapps(very important) to prevent force close.
Due to the new permission management system in Marshmallow u will face problems if u dont flash gapps right after flashing the rom.
reboot. enjoy
DOWNLOADS
Download ROM from here
Download GAPPS from here
CREDITS​
First of all the people who made cm13 possible for mtk6592 like ferhung, fire855 and all cm13 devs!!!!
Temasek, Arter97 - For developing Temasek <3
Alot of thanks to my bro @Piyush lalwani for porting for our mm a290. Also from my bro @Mr.Ak and Sam Ramini

wow,looks cool great to see more and more come!

Showing error and installation aborted plz help

Mr.Ak said:
wow,looks cool great to see more and more come!
Click to expand...
Click to collapse
Installation aborted plz help

abhijeetmandal said:
Installation aborted plz help
Click to expand...
Click to collapse
use philz recovery dude

Mr.Ak said:
wow,looks cool great to see more and more come!
Click to expand...
Click to collapse
Yep thanks to you and Piyush for porting

abhijeetmandal said:
Installation aborted plz help
Click to expand...
Click to collapse
Use this guide to install philz recovery here

Hi all,
how much free ram after installation?
Did someone successfully downgrade from Temasek to stock 4.4.2? What image did you use for downgrading? What's the procedure?
Cheers, and thanks.

mercxda said:
Hi all,
how much free ram after installation?
Did someone successfully downgrade from Temasek to stock 4.4.2? What image did you use for downgrading? What's the procedure?
Cheers, and thanks.
Click to expand...
Click to collapse
400+ free ram..... Yes you can downgrade to stock.
You will need your a290.img ofcourse......
There are guide given to flash stock ROM through recovery or through windows flash tool. Google it!

i ca
I can't root my rom after flashing this rom plz help..

proximity sensors
any patched or radio files are available for proximity sensors???

i have bugs
I somehow able to root my device.
While when I'm checking if everything is fine I found out that I cannot change bw 3g and 2g in sim networks also the mobile data is not working.a exclamation marks appear attach to the mobile network icon in status bar ....
But I can't connect to net even I have mobile data in my phone.
Plzzz help ............any suggestions etc about those two problems......

[email protected] said:
I can't root my rom after flashing this rom plz help..
Click to expand...
Click to collapse
Flash root via philz recovery in advanced >re-root system after that install SuperSU from play store, or you can download latest SuperSu.zip from XDA , flash it then install SuperSU app.
Open the su app and let it update the binary after that reboot.

[email protected] said:
any patched or radio files are available for proximity sensors???
Click to expand...
Click to collapse
Proximity is not a port problem its source problem... No actual development are there for a290.

[email protected] said:
I somehow able to root my device.
While when I'm checking if everything is fine I found out that I cannot change bw 3g and 2g in sim networks also the mobile data is not working.a exclamation marks appear attach to the mobile network icon in status bar ....
But I can't connect to net even I have mobile data in my phone.
Plzzz help ............any suggestions etc about those two problems......
Click to expand...
Click to collapse
Hi you can switch 2g/3g from settings>system profile >choose the current profile and in there go to preferred network type. Mobile data network works fine for me here , just reset the ROM again and it will work just fine if the problem presist.

Thnx for above post...
I was able to root and found that network change option but after changing it to 2g, settings are unfortunately stopped and now I can't access the system profile.everytime I get in system profile in current profile option it closes .how to change default storage to sd card and WiFi also drops every 10 to 15 mins for no reason .Why notification led keeps on when battery is low I mean in KitKat its not continuous on it goes on and off and on and off like this....and imp. thing is that it taking too long to full charge even I m using a 2 ampere output charger.also can't connect to pc via mtp.it didn't working...
Plz help regarding these issues....

Plz help this is serious OTG is not working???
Plz help.....

I'm using Samsung Evo plus 32 gb. Every time I format it as internal it ended up as corrupted sd . I tried many times.everytime corrupts and shows some Java error.plz help....

Meo15 said:
Hi you can switch 2g/3g from settings>system profile >choose the current profile and in there go to preferred network type. Mobile data network works fine for me here , just reset the ROM again and it will work just fine if the problem presist.
Click to expand...
Click to collapse
Plz help me regarding other issues

[email protected] said:
Thnx for above post...
I was able to root and found that network change option but after changing it to 2g, settings are unfortunately stopped and now I can't access the system profile.everytime I get in system profile in current profile option it closes .how to change default storage to sd card and WiFi also drops every 10 to 15 mins for no reason .Why notification led keeps on when battery is low I mean in KitKat its not continuous on it goes on and off and on and off like this....and imp. thing is that it taking too long to full charge even I m using a 2 ampere output charger.also can't connect to pc via mtp.it didn't working...
Plz help regarding these issues....
Click to expand...
Click to collapse
Try clearing data of settings and try again, I have not faced this problem at all. I have not tried about changing the default storage but you have to format the sdcard first so that u can use sdacrd as default storage, try googling "marshmallow default storage". For WiFi It must be bug , I think.
Are there no options on turning the led off on settings> display or Temaske setting menu ? There may have an option on turning the led from blinking.
Charging works fine on my default micromax charger.