Hi everyone!
New to this form, and i need you guys help. I'm located in HK (using One2free)
got me a China OPO, flashed to CM11 and now I can't make or receive calls when in 4G mode.
I can make and take calls when i switched to 3G or 2G.
how can i fix this issue.
Thanks in advance
Jerome
The OPO does not support Voice over LTE (VoLTE). Do not limit your phone to LTE only
Go to dialer, dial in *#*#4636#*#*... phone settings... set it to LTE/GSM auto PRL under preferred network type.
zephiK said:
The OPO does not support Voice over LTE (VoLTE). Do not limit your phone to LTE only
Go to dialer, dial in *#*#4636#*#*... phone settings... set it to LTE/GSM auto PRL under preferred network type.
Click to expand...
Click to collapse
thanks for the quick reply, i did completely what you suggested but still no luck.. when i call it still says out of service area.:crying:
sljer said:
thanks for the quick reply, i did completely what you suggested but still no luck.. when i call it still says out of service area.:crying:
Click to expand...
Click to collapse
Your phone should switch back to 3G/2G when you make the phone call. Do you have anything on your phone to prevent that from happening?
zephiK said:
Your phone should switch back to 3G/2G when you make the phone call. Do you have anything on your phone to prevent that from happening?
Click to expand...
Click to collapse
ya, it didn't switch... i don't think i have anything preventing to switch back to 3G/2G. How do i check? Sorry I'm such a noob on this thing.
sljer said:
ya, it didn't switch... i don't think i have anything preventing to switch back to 3G/2G. How do i check? Sorry I'm such a noob on this thing.
Click to expand...
Click to collapse
I have no idea, normally it should just switch to 2G/3G when making the call.
Maybe this would help? http://forum.xda-developers.com/showthread.php?t=2793471 ask there. I'm not familiar with the chinese OPO
This is a kernel issue or your apn settings are wrong.
i think its your apn setting
165
no_username_available said:
i think its your apn setting
Click to expand...
Click to collapse
thank you for you guys comments! much appreciated:good:!
how do i check and how do i fix it? sorry for the noob questions again.
sljer said:
thank you for you guys comments! much appreciated:good:!
how do i check and how do i fix it? sorry for the noob questions again.
Click to expand...
Click to collapse
well i don't exactly know how to change it but i think it involves getting to the service menu and changing it there
It's due to the radio of CM11S using is not compatible.
Flash this rom. https://download.cyanogenmod.org/?device=bacon&type=snapshot
Then you'll get your device working in all bands.
I just fixed this problem yesterday.
Related
If your someone whos stuck on 1x this will at least get you back to 3g.
Use the ##778# menu (hit call after ##778#)-->password is 000000-->modem settings-->Rev A-->choose enable-->hit the menu button on the tbolt and commit changes
Update:
So to answer the question of should you change this back?
The default setting is eHPRD which is verizons simultaneous voice and data 3G network. By hitting enable your switching your phone do EVDO or Rev A is pretty much their older 3G netowrk. The info is yours now you make the call of weather you should or shouldnt
To Revert back once everything is fixed:
Use the ##778# menu (hit call after ##778#)-->password is 000000-->modem settings-->Rev A-->choose eHPRD-->hit the menu button on the tbolt and commit changes
So is this a network problem or a phone problem because of flashing radios?
nationwide network issue with 4g and 3g
davezaff said:
nationwide network issue with 4g and 3g
Click to expand...
Click to collapse
Actually I think it is just 4G. The reason our phones lose 3G as well is explained in this article.
http://forum.androidcentral.com/htc...blems-3g-data-dont-hard-reset-read-first.html
The issue with not getting 3G can be fixed by following the instructions in the OP.
jvward said:
If your someone whos stuck on 1x this will at least get you back to 3g.
Use the ##778# menu (hit call after ##778#)-->password is 000000-->modem settings-->Rev A-->choose enable-->hit the menu button on the tbolt and commit changes
Click to expand...
Click to collapse
this does not work on most devices i'm learning unless 3G is totally out in chicago as well.
mojonation1487 said:
this does not work on most devices i'm learning unless 3G is totally out in chicago as well.
Click to expand...
Click to collapse
did you do this and reboot?
mojonation1487 said:
this does not work on most devices i'm learning unless 3G is totally out in chicago as well.
Click to expand...
Click to collapse
It worked on my phone, although it did take a minute or two once my phone rebooted before the 3G connection started. That was probably because I am in a building that actually gets great 4G coverage, but spotty 3G coverage.
psufan5 said:
did you do this and reboot?
Click to expand...
Click to collapse
lol you have to
sdorn77 said:
It worked on my phone, although it did take a minute or two once my phone rebooted before the 3G connection started. That was probably because I am in a building that actually gets great 4G coverage, but spotty 3G coverage.
Click to expand...
Click to collapse
are you in chicago. All my friends are still screwed too.
It works but its in and out for me here in tampa. So let me ask this. When lte comes back on do we go back in and change it back to previous setting?
Sent from my ADR6400L using XDA App
It worked got me, will I have to revert the settings?
Sent from my thunderbolt rooted in the red sand of Mars
Hellzya said:
It works but its in and out for me here in tampa. So let me ask this. When lte comes back on do we go back in and change it back to previous setting?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
If you want to do voice and data at the same time over 3G yes.
Thanks for this. I was beginning to think it was the rom I was using.
I wish i'd have seen this sooner...I thought it was the ROM as well and unrooted my phone this morning just to find that wasn't it. CS informed me there was a nationwide outage after the fact (I have been stuck on 1X since yesterday)
Quick question - I was so quick to try this that I didn't pay attention to the original settings of the phone does anyone know what they are so I can revert back when the system comes back up?
ANDROID 3G said:
Thanks for this. I was beginning to think it was the rom I was using.
Click to expand...
Click to collapse
haha yeah i thought after screwing with the cm7 builds I royally fubarred my radio or something. hahahaha
What do you guys think... if this continues a day, will Verizon give us $$$ off on our bill?
BigMcGuire said:
What do you guys think... if this continues a day, will Verizon give us $$$ off on our bill?
Click to expand...
Click to collapse
Lol they are associated with darth vader. Expect a force choke if you ask that question. hehe
mojonation1487 said:
Lol they are associated with darth vader. Expect a force choke if you ask that question. hehe
Click to expand...
Click to collapse
Haha, sometimes it seems like it!
why wont this work or me?? when i call ##778# , nothing happens....
Hanks for the quick fix! Any negative affects of leaving the settings like this even after big red gets their **** straight? Oh, btw, I am in NC with no 4g coverage at all. This worked like a charm.
Sent from my ADR6400L using XDA App
For some reason I cannot get LTE to work at all on CM10. I've done everything and it still wont work at all. I tried reverting back to stock rom, and when I did, LTE worked. So I thought if I went back to CM10 from stock it would resolve the issue, but it did not. I've checked my APNs and I cannot change the preferred network mode and i tried *#*#info#*#* and i can't change anything there to anything that has LTE on it. I'm not sure if it's just a problem with the ROM or what, but I've done plenty of researched, searched all the forums, and can't find anything that will fix.
Additional information:
Im in ATT
I've tried all the radios
and I AM in an LTE area.
nickd009 said:
For some reason I cannot get LTE to work at all on CM10. I've done everything and it still wont work at all. I tried reverting back to stock rom, and when I did, LTE worked. So I thought if I went back to CM10 from stock it would resolve the issue, but it did not. I've checked my APNs and I cannot change the preferred network mode and i tried *#*#info#*#* and i can't change anything there to anything that has LTE on it. I'm not sure if it's just a problem with the ROM or what, but I've done plenty of researched, searched all the forums, and can't find anything that will fix.
Additional information:
Im in ATT
I've tried all the radios
and I AM in an LTE area.
Click to expand...
Click to collapse
Just making sure, but you know the LTE icon doesn't exist in cm10 , right? LTE is indicated by the 4g icon
xcrazydx said:
Just making sure, but you know the LTE icon doesn't exist in cm10 , right? LTE is indicated by the 4g icon
Click to expand...
Click to collapse
Yeah, I only get HSPA+, HSPA, 3G
nickd009 said:
Yeah, I only get HSPA+, HSPA, 3G
Click to expand...
Click to collapse
Ok, try different apn. Which cm10 are you trying to use?
Does the problem happen on other ROMs? I'm not saying to use a different ROM, just saying that if it doesn't happen on, say, AOKP or Orthus (both CM-based), it's probably an issue with how CM10 is configured on your phone.
If you go into network operators (settings -network)and select att it will allow to change modes.
whassupmyninja said:
If you go into network operators (settings -network)and select att it will allow to change modes.
Click to expand...
Click to collapse
omg.. that was it all along. wtf, I feel so dumb now..
nickd009 said:
omg.. that was it all along. wtf, I feel so dumb now..
Click to expand...
Click to collapse
Haha yeah most of the time this setting is overlooked and this option enables you to turn off LTE if you want (which you don't have to have a RAT unlocked modem as presumed) and if you go to *#*#4636#*#* on your dialer you can have it set to LTE only as well.
UZ7 said:
Haha yeah most of the time this setting is overlooked and this option enables you to turn off LTE if you want (which you don't have to have a RAT unlocked modem as presumed) and if you go to *#*#4636#*#* on your dialer you can have it set to LTE only as well.
Click to expand...
Click to collapse
I actually have another problem now, after a reboot, it doesn't show any options for me to choose under available networks?
it came back after a few tries but then went away again, it's not consistently there to choose.
Does it show a searching animation?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I have the exact same issues. I've done everything on this post plus done all the research as well. For my problem whenever I enter an LTE area my data service completely drops for about 5 seconds and then when it connects it only shows HSPA+. I have never been able to pick up LTE. When I was on CM9.1 I had no issues at all. LTE connected with no issues. So is this a CM10 issue or a phone issue?
try this, might help, might not, make a backup, if you have more than one apn, remove all apn's except your lte apn(ATT Pta, for rogers :ltemobile), restart phone
edit: of course make sure it was set to the lte apn in the first place, if it was and still have probs, do above procedure if you have more than one apn
vincom said:
try this, make a backup, remove all apn's except your lte apn, restart phone
Click to expand...
Click to collapse
For some reason my APN was not set to the lte one (ATT Pta). I changed it to that. Hopefully that fixes my problem. Thanks for the help!
I have a slightly different problem. I am running the latest cm10 nightly and notice that any time I get lucky and go into a 4g coverage area I can only make phone calls. No data transfers at all. I have my APN set to ATT LTE pta which I assumed is the right selection. Im normally in a A3g(HSPA)~700-17 coverage area. Is this the wrong APN to use?
njbballjerzy5 said:
For some reason my APN was not set to the lte one (ATT Pta). I changed it to that. Hopefully that fixes my problem. Thanks for the help!
Click to expand...
Click to collapse
The APN change worked for me. This is the proof
njbballjerzy5 said:
The APN change worked for me. This is the proof
Click to expand...
Click to collapse
Do you automatically switch back and fort from 3 to 4g with that APN setting when you move around without losing data capability?
26.2man said:
Do you automatically switch back and fort from 3 to 4g with that APN setting when you move around without losing data capability?
Click to expand...
Click to collapse
Yup. I have HSPA/HSPA+ around my house but close to work I have LTE. No problem with switching or losing data connection when I go from HSPA to LTE. Just double check your APN settings. There might be a typo or some missing field. Or you can create a new APN for lte and use that as your default.
njbballjerzy5 said:
Yup. I have HSPA/HSPA+ around my house but close to work I have LTE. No problem with switching or losing data connection when I go from HSPA to LTE. Just double check your APN settings. There might be a typo or some missing field. Or you can create a new APN for lte and use that as your default.
Click to expand...
Click to collapse
Okay
Im a nooob. How do you create APN's ?
26.2man said:
Okay
Im a nooob. How do you create APN's ?
Click to expand...
Click to collapse
Try using Google search! It always helps me!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
@26.2man, you've gotta have att provision you for lte at the store or whatever if you haven't done so already. Then it should work.
Sent from my HTC PH39100 using xda premium
I can't get any sort of data signal at all from my phone! IT's already been 3 days since this happened and I can't change my APN, nor does switching the modem version work, what do I do?? I would really hate to call AT&T because they'll just blame the phone being rooted and expect me to go back to stock Gingerbread.
So someone please help me so that I wouldn't have to do that!
lemonz23 said:
I can't get any sort of data signal at all from my phone! IT's already been 3 days since this happened and I can't change my APN, nor does switching the modem version work, what do I do?? I would really hate to call AT&T because they'll just blame the phone being rooted and expect me to go back to stock Gingerbread.
So someone please help me so that I wouldn't have to do that!
Click to expand...
Click to collapse
Have you tried ODIN back to stock to eliminate any potential external issues? I saw your post yesterday in my APN thread. At this point I would go back to stock and see if that helps and then from there root/flash the ROM of your choice.
Questions and help issues go in Q&A
Thread moved
FNM
lemonz23 said:
I can't get any sort of data signal at all from my phone! IT's already been 3 days since this happened and I can't change my APN, nor does switching the modem version work, what do I do?? I would really hate to call AT&T because they'll just blame the phone being rooted and expect me to go back to stock Gingerbread.
So someone please help me so that I wouldn't have to do that!
Click to expand...
Click to collapse
Have you checked if you have your IMEI number?.? *#06# on dialer or look through the phone info in settings...
I had this issue once. This is what worked for me: settings > wireless & networks > mobile networks > use packet data [should be checked] ~ data roaming [should be unchecked]. My issue may have been different than urs. Good luck.
Sent from my Aeon-ified Samsung Infuse 4G using xda-developers app & SwiftKey 3
What ROM are you running? Are you running any type custom message app or program?
Nexus 7 Running JellyBam v7
same problem
zaghy2zy said:
Have you checked if you have your IMEI number?.? *#06# on dialer or look through the phone info in settings...
Click to expand...
Click to collapse
I just installed the new CM 10.1 and I have the same problem. Actually I've had it mostly with all the JB softwares out there that I tried. Could the signal problem be related to the IMEI? I think I've lost, indeed, my IMEI by changing to JB but could that be my problem? Yesterday I placed a few phone calls and it worked. Now it just random disconnects and it woun't allow me to make any phonecalls. Also it takes 5-10 minutes before it connects to the network (Vodafone - if it makes any difference). I just figuered it was a modem problem but you got me wondering.
Thanks
Sorry I had to post this here because it won't let me post on the rom forum. Has anyone had any issues with not being able to use data and talk at the same time? or use the usb tethering, the wifi tethering works.
thanks
haevn said:
Sorry I had to post this here because it won't let me post on the rom forum. Has anyone had any issues with not being able to use data and talk at the same time? or use the usb tethering, the wifi tethering works.
thanks
Click to expand...
Click to collapse
I did not have that issue when using the GPE rom no. Did you make any changes to the APN settings? Did you take it off of Global?
I'm pretty sure I read a few other users in that thread saying the same.
Sent from my HTC6525LVW
HughesNet said:
I did not have that issue when using the GPE rom no. Did you make any changes to the APN settings? Did you take it off of Global?
Click to expand...
Click to collapse
I have not changed anything on the rom, I had to change the sim card the other day because no matter what I was only on 3g and no LTE. all the settings are correct for me to have LTE. when I was in the Verizon store on Monday I checked there display phone and it is automatic set to global, even the rep there said that all these phones automatically set itself to global. when I change it to LTE instead of global I get no signal what so ever, and when I go to *#*#4636#*#* and change it to the lte/gsm/cdma I still get no signal.
Hi guys, this is my first post so please be easy on me. I have an unlocked Sprint Note5 that I use on Tmobile network right now. I added the 'fast. t-mobile.com' APN and have mobile network working. BUT ONLY 3G!! The fastest I've gotten so far is about 10 Mbps or so, and usually it's just 2-3 Mbps.
My question: is there a way for me to get LTE on this device with Tmobile? Or it's hardware/software impossible? For the simple reason of Samsung Pay, I'd rather not root my phone. The Samsung Pay has given A LOT promotions so far and I prefer to keep it.
joeyzh said:
Hi guys, this is my first post so please be easy on me. I have an unlocked Sprint Note5 that I use on Tmobile network right now. I added the 'fast. t-mobile.com' APN and have mobile network working. BUT ONLY 3G!! The fastest I've gotten so far is about 10 Mbps or so, and usually it's just 2-3 Mbps.
My question: is there a way for me to get LTE on this device with Tmobile? Or it's hardware/software impossible? For the simple reason of Samsung Pay, I'd rather not root my phone. The Samsung Pay has given A LOT promotions so far and I prefer to keep it.
Click to expand...
Click to collapse
How do you unlock a sprint note 5 without root?
joeyzh said:
Hi guys, this is my first post so please be easy on me. I have an unlocked Sprint Note5 that I use on Tmobile network right now. I added the 'fast. t-mobile.com' APN and have mobile network working. BUT ONLY 3G!! The fastest I've gotten so far is about 10 Mbps or so, and usually it's just 2-3 Mbps.
My question: is there a way for me to get LTE on this device with Tmobile? Or it's hardware/software impossible? For the simple reason of Samsung Pay, I'd rather not root my phone. The Samsung Pay has given A LOT promotions so far and I prefer to keep it.
Click to expand...
Click to collapse
I was in this same predicament. You have to choose LTE.
What worked for me was choosing LTE/CDMA mode from Network Mode and then when setting up the APN, there should be a section at the bottom that says 'Bearer'. Click that and choose LTE. After that LTE started working for me. You should also be able to switch to Automatic Network Mode after this.
so is the phone already unlock
OMG, it worked like magic!! Who would know to choose LTE/CDMA knowing that Tmobile uses GSM. Many many thanks!! All of sudden I'm getting ~50 Mbps v.s. the 2 Mbps 3G speed. This is NICE!
MrLeon said:
I was in this same predicament. You have to choose LTE.
What worked for me was choosing LTE/CDMA mode from Network Mode and then when setting up the APN, there should be a section at the bottom that says 'Bearer'. Click that and choose LTE. After that LTE started working for me. You should also be able to switch to Automatic Network Mode after this.
Click to expand...
Click to collapse
I bought the phone at full price at Best Buy and it took me a while fighting with Sprint to get it unlocked (I was with Sprint at the time even). According to their unlock policy posted online, the phone should be automatically unlocked already if bought at full price. They honored that but it just took forever and so many departments to get it done eventually. You'd have to be tenacious about it. I plan to do a factory reset with tmobile sim in to get rid of all the Sprint bloatware.
laofan said:
How do you unlock a sprint note 5 without root?
Click to expand...
Click to collapse
smiley45 said:
so is the phone already unlock
Click to expand...
Click to collapse
joeyzh said:
OMG, it worked like magic!! Who would know to choose LTE/CDMA knowing that Tmobile uses GSM. Many many thanks!! All of sudden I'm getting ~50 Mbps v.s. the 2 Mbps 3G speed. This is NICE!
Click to expand...
Click to collapse
Could you post up some screenshots showing that it worked and your data speeds please?
joeyzh said:
OMG, it worked like magic!! Who would know to choose LTE/CDMA knowing that Tmobile uses GSM. Many many thanks!! All of sudden I'm getting ~50 Mbps v.s. the 2 Mbps 3G speed. This is NICE!
Click to expand...
Click to collapse
Hi everybody, also my first message here.
I got the same problem, but a little worse. I bought a SM N920P unlocked by mistake (from ebay) as I didn`t know that Sprint was CDMA. I live in Brazil and there`s only GSM carriers. It works here for voice and data but can only get 3G (up to 8mbps) while my other phone (moto e 4G) goes up to 30 mbps. And if I choose LTE/CDMA it goes offline .
And worse, it always trying to activate and receiving the message 'activation not completed'.
I wonder if I root it could it be turned from N920P into N920i or any other.... is it possible?
crfri said:
Hi everybody, also my first message here.
I got the same problem, but a little worse. I bought a SM N920P unlocked by mistake (from ebay) as I didn`t know that Sprint was CDMA. I live in Brazil and there`s only GSM carriers. It works here for voice and data but can only get 3G (up to 8mbps) while my other phone (moto e 4G) goes up to 30 mbps. And if I choose LTE/CDMA it goes offline .
And worse, it always trying to activate and receiving the message 'activation not completed'.
I wonder if I root it could it be turned from N920P into N920i or any other.... is it possible?
Click to expand...
Click to collapse
Have you figured this out yet? For me, you had to choose LTE from the "Bearer" setting in the APN settings. Not only Network Mode.
I got the same problem, now im LTE, my data is normal, but when i mannaged to make a call, it says sim error or no sim...
Can someone help me fix this problem?
In settings i got LTE/CDMA
And the bearer on aon is lte...
Help me fix this im not able to make calls
Chamako Ak-47 said:
I got the same problem, now im LTE, my data is normal, but when i mannaged to make a call, it says sim error or no sim...
Can someone help me fix this problem?
In settings i got LTE/CDMA
And the bearer on aon is lte...
Help me fix this im not able to make calls
Click to expand...
Click to collapse
Hey I'm on Verizon note 5, and I haven't found a fix yet. However, u can follow my fix here.....http://forum.xda-developers.com/showthread.php?t=3280342
last post in the thread. I've found a way to enable LTE, until a phone call is made, then u need to switch back to cdma/LTE until LTE pops up, then switch it back to global. It's a solution, but kind of sucks.
Chamako Ak-47 said:
I got the same problem, now im LTE, my data is normal, but when i mannaged to make a call, it says sim error or no sim...
Can someone help me fix this problem?
In settings i got LTE/CDMA
And the bearer on aon is lte...
Help me fix this im not able to make calls
Click to expand...
Click to collapse
Sent from my SM-N920V using XDA-Developers mobile app
fix for all your issues.
This is the fix that worked for me but, you need to have your MSL code for the phone...everything works for me LTE MMS everything.
youtube{dot}com/watch?v=5tBeKAGkc1Y
As far as to remove hands free activation..your phone needs to be rooted and follow this guide since this method worked for me.
youtube{dot}com/watch?v=-SEVcT9FJvw
You need to put it back to auto after you get lte to work. This allows it to switch between the two when you are making calls or online. If you keep it in lte/cdma, your gsm carrier will not wotk.
This worked for perfectly for me! Thanks foruonlyfrom007 for the advice to set it to automatic. Now i have LTE and can make calls with no issues! And by the way all you have to do is download package disabler from playstore to stop the activation, no root necessary
---------- Post added at 11:38 PM ---------- Previous post was at 11:30 PM ----------
azutel said:
This is the fix that worked for me but, you need to have your MSL code for the phone...everything works for me LTE MMS everything.
youtube{dot}com/watch?v=5tBeKAGkc1Y
As far as to remove hands free activation..your phone needs to be rooted and follow this guide since this method worked for me.
youtube{dot}com/watch?v=-SEVcT9FJvw
Click to expand...
Click to collapse
All you need to download is package disabler pro, disable samsungDMservice and your set
Hi , i see that ppl in here got the LTE and Gsm service, i have a note 5, i unlocked it from a friend (unfortunately i couldnt get hold of him for a while) but now when i put the tmobile sim on the setting there is no "mobile netowk" option how can i get my mobile network option so that i can choose the gsm network(but when i put the sprint sim it/mobile network button comes back) plz help im in dieing need of it, thanx
azutel said:
This is the fix that worked for me but, you need to have your MSL code for the phone...everything works for me LTE MMS everything.
youtube{dot}com/watch?v=5tBeKAGkc1Y
As far as to remove hands free activation..your phone needs to be rooted and follow this guide since this method worked for me.
youtube{dot}com/watch?v=-SEVcT9FJvw
Click to expand...
Click to collapse
the first youtube video link is no longer working.
Note 5
Chamako Ak-47 said:
I got the same problem, now im LTE, my data is normal, but when i mannaged to make a call, it says sim error or no sim...
Can someone help me fix this problem?
In settings i got LTE/CDMA
And the bearer on aon is lte...
Help me fix this im not able to make calls
Click to expand...
Click to collapse
go to the play store and download a App called 4G Swither once you download it open the App and scroll down to where its says turn Off Radio , just above it you should the option to chage your sittins please chose LTE/GSM auto (PRL)
Help
joeyzh said:
OMG, it worked like magic!! Who would know to choose LTE/CDMA knowing that Tmobile uses GSM. Many many thanks!! All of sudden I'm getting ~50 Mbps v.s. the 2 Mbps 3G speed. This is NICE!
Click to expand...
Click to collapse
I already got the calls and the data working perfect i just having problems with my mms cant recieve or send them any help
demonangel98 said:
I already got the calls and the data working perfect i just having problems with my mms cant recieve or send them any help
Click to expand...
Click to collapse
Yes I was able to get mms working perfectly simply by adding port 80 as the mms port.
My only problem now is that mms only works when I am not connected to wifi. If I receive any mms I have to disconnect from wifi and then tap it to receive it.
If anyone knows how to make mms work with wifi too, please comment and add @textbook.
textbook said:
Yes I was able to get mms working perfectly simply by adding port 80 as the mms port.
My only problem now is that mms only works when I am not connected to wifi. If I receive any mms I have to disconnect from wifi and then tap it to receive it.
If anyone knows how to make mms work with wifi too, please comment and add @textbook.
Click to expand...
Click to collapse
ive had this issue on many phones theres a setting about download mms while on wifi usally on most 5.1 and newer not all bu most
it kicks in lte or highest data speed avail even with wifi on just to dl the mms
something about wifi handover to lte making sure wifi calling is on but i saw a setting in mine somewhere just for that