after I tried to restore my phone by using stock rom and I can turn S-on already.
but after I use OTA update . After downloading OTA it cannot install.
Variant System etc..... cannot remember.
It means that it is not complete restore my phone to original?
Can we solve this problem?
Do you have stock recovery?
Sent from my HTC Sensation XE with Beats Audio using XDA App
yes I recovered from stock RUU in this forum
did you fix it? I have the same problem now.
Can you explain what the problems is? Need some basic info to try to help you!
What modelid?
Which hBoot?
Whats ur CID?
What OS version?
Whats the weather like outside???
SquithyX said:
Can you explain what the problems is? Need some basic info to try to help you!
What modelid?
Which hBoot?
Whats ur CID?
What OS version?
Whats the weather like outside???
Click to expand...
Click to collapse
Got it to work, needed the XE ruu, so i downloaded and ran "RUU_Pyramid_LE_HTC_Europe_1.72.401.1_Radio_10.58.9035.00U_10.15.9035.02_2_release_214840_signed.exe",
Everything worked fine, was back on GB and S-ON. Then I updated the OTA update to ICS, and installed it. Now it won't boot. Just the HTC splash screen, then rebooting again. Can't see the boot animation, just the white screen with green "hTC".
I have booted into bootloader and fastboot, tried boot into recovery, but that didn't work it just rebooted again (and I don't have a recovery installed). I tried "Factory reset" but it just rebooted again. It does not get passed the splash screen. Any help?
Info:
HTC Sensation XE
Pyramid PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
This is what it says in the HBOOT and FASTBOOT.
Any tips on what to do? It will be greatly appreciated.
Edit: saw another thread, maybe the firmware is too old? I thought it got updated with the RUU, but maybe it doesnt? To install a new firmware do i just adb push it to the sd card? As mentioned above I can't get into recovery and mount sd-card.
Ok, whats your CID?
The base rom you needed to install for OTA update was 1.73.401.4 not 1.73.401.1
Did you have s-off??
It's not the FW as it's updated in the OTA - do a factory reset and you should be fine (although you'll lose your data)
@SquithyX: My CID is 11111111, unless it got reset after running the ruu
I had S-OFF but set it to ON, needed to send it in for rep.
@EddyOS: I can't factory reset, when I press it in BOOTLOADER it just get stuck in a boot loop again. I don't have a custom recovery installed due to me beeing S-ON
Also, thanks for help
Are you sure you flashed 1.73.401.1 rom???
Your CID should be the same
If you did, it looks like you need to s-off (not easy now but can be done)
Install 1.73.401.4 GB ROM
Then apply OTA ICS update
thanks, will try to get s-off again? Do you have a guide to get s-off from bootloader/fastboot? I searched around for it but did not get any results
Its not very nice as it uses the HTCDev system by here you go:
http://forum.xda-developers.com/showthread.php?p=21922297#post21922297
You need to downgrade your firmware and install the 1.73.401.4 ROM, from there you will have a smooth upgrade to ICS.
Thanks very much, will give it a go in the morning.
Hi.
Having issues regarding a stuck recovery at htc logo.
phone is:
unlocked, rooted
hboot is 2.00.0002
S-ON
i would really like to downgrade to 0.9x so that i can use revolutionary to flash whatever i want.
i have tried everything in this thread:
http://forum.xda-developers.com/show....php?t=1447062
nothing works.
can not get another hboot in to the phone.
can anyone help me?
PS yes i have checked the official thread, makes no sense to me.
Since you're unlocked (but why? you could have gone S-OFF just as easily without unlocking) you can simply download a custom recovery and do:
Code:
fastboot boot recovery.img
Then use misc_version to lower your base version and then you can relock the bootloader, run an older RUU, and use revolutionary.
Hi all,
I installed MaximusHD ROM and messed up my partitions so now I have only 2 GB available. I want to fix it by going back to stock ROM.
Currently my phone is superCID, s-off, hboot 2.16, radio 1.20.
From what I've read I should be able to install any RUU but I have not been able to. I tried to do it in fastboot mode and in normal mode when Android is on but without success. Setup starts but some unknown error appears, I think it is error 105... or 150.
I've followed some guides here but the setup won't work because of the unknown error Do I have to look for a specific RUU ?
The only thing that I have not done is to lock my bootloader prior to installing the RUU. However the guides state that I do not have to lock it if my phone is S-OFF.
If I do fastboot getvar all next to "version main" I see nothing, it is empty.
Please help!
I changed my CID to HTC__001 but this did not help Please help me to get back to stock !
mkoev said:
I changed my CID to HTC__001 but this did not help Please help me to get back to stock !
Click to expand...
Click to collapse
I had similar issue what I ended up doing was pulling the recovery image out of the install package and flashing it via fastboot and it restored my sd storage I had to use the modified recovery supplied I would try that- I believe you could change your cid to whatever RUU your trying to flash and it should work also,its seems some have downgraded to hboot 2.1.5 to flash RUU (read,read,read)best of luck
Somehow I fixed my problem yesterday. I was not able to install RUU however I was able to change my hboot back to 1.04 ... afterwards I installed the latest version of TWRP and suddenly I was able to see stuff on my internal memory. Prior to that TWRP 2.3.x.x was not able to detect my whole internal memory. Anyway... my advice to people is not to install MaximusHD via CWM although it says that it works. It does work, but it is easier with TWRP
So this is my situation,
after using MaximusHD 10.0.0, I would like to go back to my stock rom. The problem is that I lost my nandroid back-up because of flashing another update version of twrp. I'm a little bit new to all this android flashing stuff, so I was wondering if anybody could help me?
I was planning of using a guild for this, which i can't post because i'm a new user, who says just to relock bootloader and use a RUU. But instead of using the T-mobile version, I wanted to use a RUU file for Europe.
Before I was going to start with this, I wanted to make a nandroid back-up, but CWM can't mount my SD-card.
So, how do I start going back to the stock rom from MaximusHD 10.0.0 on my HTC One S C4?
Ask for more info if needed!
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)
Try to flash TWRP, then you can backup.
And then flash an RUU
AndroGeek974 said:
Try to flash TWRP, then you can backup.
And then flash an RUU
Click to expand...
Click to collapse
So, do I need to first Relock my bootloader before I run the RUU? Or is it not needed because I'm S-OFF?
im also S-Off and on Hboot 2.16, now to get back to 2.15 is this the right way ?
flash my backup of stock 3.16 Jelly Bean in TWRP
relock the bootloader
Flash 3.16 RUU.exe
Thanks
So, last little question!
What happens if the RUU gives an error?
Does your ROM is still the way it was before if you cancel the RUU after error?
Or is your ROM deleted?
FantasyGamer said:
So, last little question!
What happens if the RUU gives an error?
Does your ROM is still the way it was before if you cancel the RUU after error?
Or is your ROM deleted?
Click to expand...
Click to collapse
Nothing happens, the installer stops and you are still the same as you were. So it doesn't hurt to try them.
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)[/QUOTE]
what is the solution , I have the exact same problem as you and want my stock rom back ?
beerfly said:
[Update]: I found a solution for my can't mount SD Problem. So can somebody help me finding a right RUU? (I live in Belgium)
Click to expand...
Click to collapse
what is the solution , I have the exact same problem as you and want my stock rom back ?[/QUOTE]
It's really easy, you just have to reflash the modded version of TWRP for MaximusHD 10.0.0. All the other versions of TWRP or cwm won't work.
FantasyGamer said:
what is the solution , I have the exact same problem as you and want my stock rom back ?
Click to expand...
Click to collapse
It's really easy, you just have to reflash the modded version of TWRP for MaximusHD 10.0.0. All the other versions of TWRP or cwm won't work. [/QUOTE]
its the version 2.6.1.0 is it, and have to flash it via fastboot right ?
[QUOTE/]its the version 2.6.1.0 is it, and have to flash it via fastboot right ? [/QUOTE]
Yes, that's the one! But take the file shipped with MaximusHD 10.0.0 because it's a modded version, and not the normal one of 2.6.1
FantasyGamer said:
[QUOTE/]its the version 2.6.1.0 is it, and have to flash it via fastboot right ?
Click to expand...
Click to collapse
Yes, that's the one! But take the file shipped with MaximusHD 10.0.0 because it's a modded version, and not the normal one of 2.6.1 [/QUOTE]
Yes I know its modded version , I tried to push it but it cant be done, Since I have CWM recovery, i cant put this TWRP one from maximus, it says failed: remote not allowed. I think it is because I relocked my bootloader, If I have to unlock it again, i wont be able to do it since cant use sd properly, so its doomed circle i think, need really big help guys . thanks in advance !
This is what i did.
1.oem relock
2. install org RUU, i downloaded one of the exe's and just let it do it's thing.
3. done.
4. rooted
5. flashed twrp
Okay,
So I just want to be sure about this.
Are these the ONLY steps I have to take?
1) Put device in Fastboot USB
2) Run RUU -> in this case http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
3) I have my old phone back with stock rom.
More info:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
FantasyGamer said:
Okay,
So I just want to be sure about this.
Are these the ONLY steps I have to take?
1) Put device in Fastboot USB
2) Run RUU -> in this case http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
3) I have my old phone back with stock rom.
More info:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
Click to expand...
Click to collapse
Relock the phone first, i don't know why, but i read on the forums that you have too when returning to stock.
1. in cmd "fastboot oem lock" phone now says "relocked"
2. from fastboot run RUU exe and wait.
3. done
In my case the RUU flashed me back to hboot 1.13, so install all updates from htc, then it updated to hboot 2.15.
So now you need to re-unlock the phone, and flash a new recovery.
If you want CM11 hboot 2.15 you need to flash modded recovery from http://forum.xda-developers.com/showthread.php?t=2528113
If you don't CM11 flash will fail.
Go here http://forum.xda-developers.com/showthread.php?t=1583427&highlight=tutorial and follow STEP 1.
That should re-unlock the phone.
STEP 2 flashes new recovery. Skip STEP 3.
After recovery has been flashed, boot into recovery, then press "reboot" and reboot to bootloader, if you flashed twrp it will ask to install superSU.
Now you are ready to flash anything again.
Is it necessary to re unlock?
Because i'm not planning on changing rom soon.
Thanks for the help!
You don't need to flash new rom, if you want to stay on stock you can, stock will still boot fine afterwards.
fusk said:
You don't need to flash new rom, if you want to stay on stock you can, stock will still boot fine afterwards.
Click to expand...
Click to collapse
I know, but is doesn't hurt not to re-unlock, right?
I succesfully went back to Android 4.0.4 :laugh:
I now want to perform an OTA . Do I first need to S-ON?
FantasyGamer said:
I succesfully went back to Android 4.0.4 :laugh:
I now want to perform an OTA . Do I first need to S-ON?
Click to expand...
Click to collapse
Just make sure you aren't SuperCid, or it could brick the phone.
I am currently running on MaximusHD rom. My phone's details are:
ROM: MaximusHD 10.0.0
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.20.50.05.16
When i executed RUU, it showed me "incorrect image. Find the correct RUU."
Which RUU i have to download for my phone?
Hi all,
Needing a bit of help getting my One X back to stock with OTA. I've flashed the rom from here https://forum.xda-developers.com/showthread.php?t=2458291
Bootloader was unlocked and I also flashed the stock recovery, but can't get past ~25% when installing the 12mb 'heartbleed' update.
Info about device:
S-ON
HBOOT: 1.36
CID: HTC_044
Radio: 5.1204.162.29
Any ideas on how to proceed from here? I believe it has something to do with my HBOOT, but I can't figure out how to update it (to something like 1.73). Would be good if it was possible to directly flash a 4.4.4 ROM, but don't think that would be possible with the current HBOOT.
Thanks