Database Info

SuPrimo v23 with CDMA Converter v15

I installed these to my girlfriends one v from Virgin and am having problems. I have a one x and an atrix before so I am not new to rooting. This has me stumped. I bootloader unlocked, rooted and installed twrp via fastboot. I installed kernel in fastboot that was in the converter zip, then I installed the rom and converter in twrp. I am now in a constant bootloop. I have read that the bootloop is caused by not installing the boot image in fastboot, but I have done this. I know there are a lot of threads of this but I still have not find a solution to my problem. I actually in the process of using the Sprint/Virgin ruu as I am typing this to try again with a fresh start. Is there anything I am missing? Thank you very much in advance.
Edit: Sorry I didn't realize I was in the One X forum, it is 330am right now ><. Can a Mod please move this to the Q&A of the One V please. Thank you

You didn't do a full wipe
no signature....problem ?!?!?!

donhashem.dh said:
You didn't do a full wipe
no signature....problem ?!?!?!
Click to expand...
Click to collapse
Did a factory reset, cache and dal vic in both twrp then cwm after. I even tried a different rom and still boot loop after ruuing, so I ruued twice last night. Funny thing is I have never ruued my one X and the first night I try to flash stuff on the one v that happens.

All is well now. I wen to sleep for a fresh start to this. I factory wiped, wiped cache, dalvic and system. I flashed rom and converter, then fastboot flashed boot image. Now all is working. :highfive:

clean rom

Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?

chibra said:
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
Click to expand...
Click to collapse
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.

Clean ROM is freaking amazing! Seriously just do it I love the mods I can make for it too! Can't wait till I get my volume long press seek mod done! Love this device!
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend

tobdaryl said:
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Click to expand...
Click to collapse
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail

chibra said:
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
Click to expand...
Click to collapse
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.

oryhight sullivan
tobdaryl said:
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
Click to expand...
Click to collapse
i m going to give twrp another shot...

i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop

chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
I'm sorry it is hard to tell since you have chosen an older twrp to install. The current is five versions later and was updated as the kernels were updated to account for changes. The rom you are flashing is based on 10.4.4.25.

chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.

What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!

sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
Wise words. Nobody likes to listen to me so im glad someone else suggested it!

elesbb said:
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
Click to expand...
Click to collapse
Updated the TWRP to the version you mentioned still stuck in boot loop.

sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running

chibra said:
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
Click to expand...
Click to collapse
If you are coming from cm10.1 you will definitely need to do a full wipe as it is non stock. It does say this in the first post. You only do a dalvik and cache wipe when upgrading from the same ROM or in CROMI's case from stock.
Do a data wipe in recovery, make sure you have a titanium backup or equivalent if you want to restore apps.

Success!!!
It worked perfectly fine after i install the back up i did before i flashed my 1st costume rom,
I rooted made a back up at stock/rooted... It just would not install from a full wipe,
it install fine once i flashed that specific backup and dirty flashed then wiped dalvik and cache before booting.

stuck in boot up loop

I just flashed the pacman nightly over cm11 using philz recovery. and my phone keeps trying to boot up. I get the moto logo for a few seconds then it goes blank and comes back up.
not sure where to begin fixing this. Ive tried to get back into recovery but cant.
any help would be appreciated

oscar the grouch said:
I just flashed the pacman nightly over cm11 using philz recovery. and my phone keeps trying to boot up. I get the moto logo for a few seconds then it goes blank and comes back up.
not sure where to begin fixing this. Ive tried to get back into recovery but cant.
any help would be appreciated
Click to expand...
Click to collapse
You dirty flashed it over CM11? You didn't wipe system, data, cache and dalvik? I always do that, even when I'm flashing an AOSP-based ROM over another AOSP-based ROM.
The only time I won't do this is if I'm flashing say CM11 over CM11.
If you dirty flashed, that might be your problem, but I don't know for sure as I don't use PacMan ROM.

I didn't dirty flash. Cm11 was on there before. I used philz wipe forfor new rom like I always do.
I can get into the fastboot menu. Is there something I can do there to reflash cm11?

oscar the grouch said:
I didn't dirty flash. Cm11 was on there before. I used philz wipe forfor new rom like I always do.
I can get into the fastboot menu. Is there something I can do there to reflash cm11?
Click to expand...
Click to collapse
Not sure then. I always use TWRP to wipe and flash. Could be an issue with the ROM itself or you got a bad download. You might want to try and download the ROM again to ensure it wasn't a bad download.

figured it out. must have had something happen to the recovery file.
in fast boot i flashed a new recovery image and was able to boot into recovery.

Maybe you have the JB bootloader and you flashed a KitKat bootloader based CM11 build... That could explain why your phone is not booting properly.
If nothing works you just can flash a STOCK FIRMWARE to begin again.

The phone has stock kitkat. How can I confirm?

joel_sinbad said:
Maybe you have the JB bootloader and you flashed a KitKat bootloader based CM11 build... That could explain why your phone is not booting properly.
Click to expand...
Click to collapse
That's a no-go. You won't be able to flash a KK-based ROM on a system with a JB Bootloader. The device will abort the installation immediately with a friendly reminder. At least the XT926. Been there, tried that.

^ agree. My atrix HD has a jbbl and I can Confirm this

[SOLVED ]"Patching system image unconditionally..." - can't install CM at all.

[SOLVED ]"Patching system image unconditionally..." - can't install CM at all.
my device (moto G (falcon) XT1032) is a GPE device.
in the last 2 days i tried to install CM 13 on my device.
i tried 3 different recoveries** - CWM, TWRP and CM recovery - to install cm-13.0-20160206-NIGHTLY-falcon (and yes, i checked before flashing, the SHA1).
in all those tryouts i always get into the sentence in the headline - Patching system image unconditionally... - and it just stays there forever.
one time i waited 40 minutes, and it still stayed on this message, and do nothing.
every time before flashing the rom, i wiped the device (dalvik cache, cache, system, Data).
i also try to flash the latest snapshot (cm-12.1-20151117-SNAPSHOT-YOG7DAO1K9-falcon) because i thought maybe there is a problem with the latest nightly.
i still stuck in the same stage(Patching system image unconditionally...).
i also try to flash stock rom 4.4.4 from motorola (from here: http://goo.gl/xAomMi) which succeeded, and then wipe device(factory reset and wipe dalvik cache, cache, system, Data) and install again cm-13.0-20160206-NIGHTLY-falcon, and it also didn't work.
i'm still get into the same message and stay there forever.
thanks for any help
** EDIT: http://forum.xda-developers.com/showpost.php?p=65237469&postcount=3

papandreoos said:
my device (moto G (falcon) XT1032) is a GPE device.
in the last 2 days i tried to install CM 13 on my device.
i tried 3 different recoveries - CWM, TWRP and CM recovery - to install cm-13.0-20160206-NIGHTLY-falcon (and yes, i checked before flashing, the SHA1).
in all those tryouts i always get into the sentence in the headline - Patching system image unconditionally... - and it just stays there forever.
one time i waited 40 minutes, and it still stayed on this message, and do nothing.
every time before flashing the rom, i wiped the device (dalvik cache, cache, system, Data).
i also try to flash the latest snapshot (cm-12.1-20151117-SNAPSHOT-YOG7DAO1K9-falcon) because i thought maybe there is a problem with the latest nightly.
i still stuck in the same stage(Patching system image unconditionally...).
i also try to flash stock rom 4.4.4 from motorola (from here: http://goo.gl/xAomMi) which succeeded, and then wipe device(factory reset and wipe dalvik cache, cache, system, Data) and install again cm-13.0-20160206-NIGHTLY-falcon, and it also didn't work.
i'm still get into the same message and stay there forever.
thanks for any help
Click to expand...
Click to collapse
Use Philz recovery and make sure you unlocked boot loader cleanly, if this Doesn't help try to flash some other ROM.
Best Of Luck

i also used philz_touch_6.58.7-falcon recovery.
still i got into the same problem i described in my first post.
p.s.
i forgot to mention this recovery in my first post, but after you suggested it, i remembered i used it already.

papandreoos said:
i also used philz_touch_6.58.7-falcon recovery.
still i got into the same problem i described in my first post.
p.s.
i forgot to mention this recovery in my first post, but after you suggested it, i remembered i used it already.
Click to expand...
Click to collapse
Try installing some other ROM.

[email protected] said:
Try installing some other ROM.
Click to expand...
Click to collapse
do you have a suggestion for good ROM (everything works) for moto g (xt1032), which has marshmallow in it?

papandreoos said:
do you have a suggestion for good ROM (everything works) for moto g (xt1032), which has marshmallow in it?
Click to expand...
Click to collapse
May be this helps
http://forum.xda-developers.com/showthread.php?t=3284323
Or
http://forum.xda-developers.com/showthread.php?t=3250449
---------- Post added at 01:17 AM ---------- Previous post was at 01:14 AM ----------
If you can't install this flash stock and check if you can flash any Zip (try SuperSU zip in my word) if this ain't successful try to type unlock boot loader commands again.
Best of luck.

[email protected] said:
May be this helps
http://forum.xda-developers.com/showthread.php?t=3284323
Or
http://forum.xda-developers.com/showthread.php?t=3250449
---------- Post added at 01:17 AM ---------- Previous post was at 01:14 AM ----------
If you can't install this flash stock and check if you can flash any Zip (try SuperSU zip in my word) if this ain't successful try to type unlock boot loader commands again.
Best of luck.
Click to expand...
Click to collapse
i tried now the AOSP rom in one of your links.
i wiped cache, dalvik cache, system and data and then continue to install the rom, but again it stuck in the same line as before and does nothing.

papandreoos said:
i tried now the AOSP rom in one of your links.
i wiped cache, dalvik cache, system and data and then continue to install the rom, but again it stuck in the same line as before and does nothing.
Click to expand...
Click to collapse
Flash back to stock and try to flash supersu zip from here if this doesn't work the problem must be while unlocking bootloader ,anyways was bootloader unlocked normally or you had any problems ?
https://download.chainfire.eu/696/SuperSU/
Flash via fast boot not some other flash able Zip
Best of luck.

[email protected] said:
Flash back to stock and try to flash supersu zip from here if this doesn't work the problem must be while unlocking bootloader ,anyways was bootloader unlocked normally or you had any problems ?
https://download.chainfire.eu/696/SuperSU/
Flash via fast boot not some other flash able Zip
Best of luck.
Click to expand...
Click to collapse
my bootloader is unlocked already.
before i tried to flash CM couple of days ago, i follow steps from CM wiki, and part of them is to unlock the bootloader.
here are the orders i followed(although it's for a different device (moto g 4g)), it worked great:
https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine#Unlocking_the_device
if i get into fastboot mode (volume down + power) it tells me in yellow line: Device is UNLOCKED. Status Code: 3.
i also have root access.

papandreoos said:
my bootloader is unlocked already.
before i tried to flash CM couple of days ago, i follow steps from CM wiki, and part of them is to unlock the bootloader.
here are the orders i followed(although it's for a different device (moto g 4g)), it worked great:
https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine#Unlocking_the_device
if i get into fastboot mode (volume down + power) it tells me in yellow line: Device is UNLOCKED. Status Code: 3.
i also have root access.
Click to expand...
Click to collapse
The metod sound the same...........Have you tried to flash stock ROM via Fast boot again?

[email protected] said:
The metod sound the same...........Have you tried to flash stock ROM via Fast boot again?
Click to expand...
Click to collapse
i forgot to mention that after every failure of flashing, i always get back to lollipop 5.1 GPE version with this helpfull tool:
http://forum.xda-developers.com/moto-g/general/gpe-lollipop-5-1-1click-installer-t3075522
so everything is OK in my phone.
i'm just frustrated i can't install newer OS.

papandreoos said:
i forgot to mention that after every failure of flashing, i always get back to lollipop 5.1 GPE version with this helpfull tool:
http://forum.xda-developers.com/moto-g/general/gpe-lollipop-5-1-1click-installer-t3075522
so everything is OK in my phone.
i'm just frustrated i can't install newer OS.
Click to expand...
Click to collapse
Try to flash KitKat for a while then flash CM 11 then any CM 12 then CM 13 I have have an similar error, whenever I try to flash another ROM the data partition doesn't format and then I have to do is to flash KitKat Stock then CM 11 then CM 12 then CM 13 .
Best Of Luck this should work.
---------- Post added at 08:25 AM ---------- Previous post was at 08:16 AM ----------
The tool isn't a good Idea I use to make an bat file and not customized a bit file of firmware if you don't know what it is I will give it to you .

Here , download the untouched version and flash via Fast boot if not completed find KitKat version :-
http://www.gimmickmag.com/restore-moto-g-xt1032-xt1033-xt1034-back-stock-firmware/
If you can't find there wait for FileFactory server to come up again it has all firmwares

[email protected] said:
Here , download the untouched version and flash via Fast boot if not completed find KitKat version :-
http://www.gimmickmag.com/restore-moto-g-xt1032-xt1033-xt1034-back-stock-firmware/
If you can't find there wait for FileFactory server to come up again it has all firmwares
Click to expand...
Click to collapse
i flashed 4.4.4 stock from here:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
i used the untouched version:
Retail EU 4.4.4 Stock ROM (Untouched) (457mb)
https://docs.google.com/uc?id=0B6RNTe4ygItBVFlwN2pqWmV1VXc&export=download
so far it's working.
i boot into the stock and it's 4.4.4.
the screen is flickering but it's stock 4.4.4.
now i'm gonna try flash this latest snapshot of CM11:
cm-11-20140504-SNAPSHOT-M6-falcon.zip
from here:
https://download.cyanogenmod.org/?device=falcon
i now into fastboot mode, installing TWRP 3.0.0.0:
fastboot flash recovery twrp-3.0.0.0-falcon.img
success!
get into recovery now.
sha1 verified.
copy CM11 into phone
i'm still on TWRP.
i now wipe data, cache, dalvik cache and system.
done.
now i'll try flash CM11
WOW!!!
after couple of seconds (maybe 30-40) it's done.
i reboot into CM11 without a problem (just the flickering screen again, but never mind. i'm not planing to stay in CM11).
the android version in latest CM11 is 4.4.2
now i'm gonna try to flash CM12
get into recovery again.
sha1 verified.
copy cm-12.1-20151117-SNAPSHOT-YOG7DAO1K9-falcon into device.
wiping data, cache, dalvik cache and system again.
flashing!
not working
i again stuck in " "Patching system image unconditionally..." forever.
(going back to GPE 5.1)

Flash via Fast Boot it might be the problem.

[email protected] said:
Flash via Fast Boot it might be the problem.
Click to expand...
Click to collapse
you mean "adb sideload rom.zip"?
if yes, i already did that and it was stopped in 47 percent and sometime in 45 percent.
it stays there forever.

papandreoos said:
you mean "adb sideload rom.zip"?
if yes, i already did that and it was stopped in 47 percent and sometime in 45 percent.
it stays there forever.
Click to expand...
Click to collapse
No Flash Stock KitKat From Firmware via boot loader .

i think i'll pass.
i already flash kitkat and after that CM11 and it didn't help me to get into CM13.
i'm tired of flashing and restoring again and again.
thanks a lot for your help

As you wish...

I followed your steps too and i am exactly facing your problems, i am stuck in "patching system image unconditionally"...

stuck on boot image with resurrection rom

Sorry to bother you guys with stupid questions, but in the past few years, I haven't done any ROM changing or anything close to that. However, recently, I've decided to give it a try. I was on stock 4.4.4 kit kat rom on my moto g 4g XT1039 and just finished unlocking the bootloader, rooting the phone and so on. Everything was doing fine when my phone got stuck on the boot screen. Can somebody help me fix it? The procedures i've done:
- Unlocked the bootloader from motorola's website
- Updated the bootloader to version 41.1A with this tutorial http://forum.xda-developers.com/moto-g/general/falcon-bootloader-upgrader-tool-t3093793
- Flashed the TWRP 2.8.7 recovery through my computer using android sdk and motorola drivers (downloaded here http://forum.xda-developers.com/mot...ection-somcom3xs-experimental-corner-t2996266)
- Rooted using Chainfire's CF-auto root (http://forum.xda-developers.com/moto-g/4g-development/root-xt1039-cf-auto-root-peregrine-t2942406)
- Backuped my whole system
- Full wipe on recovery (except for my microSD)
- Flashed the latest ROM file (Resurrection Remix 5.7.3) and gapps nano from opengapps.com
I've already tried a full wipe and factory reset twice, but the it's still stuck.
If I'm in the wrong place to ask, can you also send me to the right one?
Thank you guys in advance for the patience.
In the meantime, I'm gonna try to go back to my backup

UPDATE: I didn't wipe DATA (there is an option to wipe data besides the advanced wipe and factory reset on TWRP). After that, you just need to do the usual full wipe and factory reset and flash your stuff, but remember that, wipe data, you're gonna need to reboot the recovery. From there, everything goes fine. For those coming directly from kit kat, remember to update the radio firmware, otherwise the network/cellular connection won't work.

UPDATE: i've flashed the radio firmware according to the second post in here and everything is working. http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816