can anyone help, I have a htc one sv, bought for me in Taiwan, all was fine then when had software update it started going wrong
freezing, turning off etc, would a replacement stock rom/ruu fix the problems and if so where can I download one
thanks in advance
julian2510 said:
can anyone help, I have a htc one sv, bought for me in Taiwan, all was fine then when had software update it started going wrong
freezing, turning off etc, would a replacement stock rom/ruu fix the problems and if so where can I download one
thanks in advance
Click to expand...
Click to collapse
Try to reboot in recovery and launch a factory reset. Make a backup first !
superbellefleche said:
Try to reboot in recovery and launch a factory reset. Make a backup first !
Click to expand...
Click to collapse
I have tried this several times but no difference, I have spoken to two people at htc, first said its worldwide software so not conflicts, but the other said sounds like the orginal software is conflicting with the update as the orginal software is for the Asian region and the update was for the Europe region,
I think I need to replace the os with a Europe region one but don't know where to find it online
julian2510 said:
I have tried this several times but no difference, I have spoken to two people at htc, first said its worldwide software so not conflicts, but the other said sounds like the orginal software is conflicting with the update as the orginal software is for the Asian region and the update was for the Europe region,
I think I need to replace the os with a Europe region one but don't know where to find it online
Click to expand...
Click to collapse
Maybe ? http://www.htcdev.com/devcenter/downloads
You won't get wrong updates on a stock phone. The update is checking softwarenumber and model-id, to prevent it from wrong flashes.
What state is your phone now on?
old.splatterhand said:
You won't get wrong updates on a stock phone. The update is checking softwarenumber and model-id, to prevent it from wrong flashes.
What state is your phone now on?
Click to expand...
Click to collapse
state? sorry im new to this pls be patient, not sure I understand,
all I can tell you is it was working fine when I first got it, then when it received an update it started going wrong, one person from htc uk said its standard software so should not be a problem but the second person I spoke to said sounds like something in the update is comflicting with the orginal OS,
Is your phone booting into android OS or hanging on booting.
Personally i would say this is a case for warranty.
Related
So I basically made an update to 3.0 beta software made by Huawei for H60-L04, but the update bricked my phone (I think it has to do with the fact I had flashed 3.0 L01 firmware on my L04 some days before).
My phone now won't turn on, even if I plug it or hold Power for more than 20 seconds.
Does anybody know of a way of making it work again? I won the phone through a partnership between Honor and another site I go to, and thus I don't have the invoice, so any RMA return is impossible for me.
Thank you.
matzehtc has nearly the same problem. He flashed the L04 on his L02 and tried to flash it back to L02. More info about his problem is in the main HH6 thread
I have a L12 with L04 Firmware and I want back to L12 too. But atm I am to scared to flash it back to L12
So I am interested too, if there is a way reverting back to L12.
I flashed the offical 60-70 MB revert update from Huawei (EMUI 3.0 to EMUI 2.3). After this I could flash the L04 Update. No root no unlock was needed.
Julsen1985 said:
matzehtc has nearly the same problem. He flashed the L04 on his L02 and tried to flash it back to L02. More info about his problem is in the main HH6 thread
I have a L12 with L04 Firmware and I want back to L12 too. But atm I am to scared to flash it back to L12
So I am interested too, if there is a way reverting back to L12.
I flashed the offical 60-70 MB revert update from Huawei (EMUI 3.0 to EMUI 2.3). After this I could flash the L04 Update. No root no unlock was needed.
Click to expand...
Click to collapse
I found matzehtc's posts. Unfortunately, they didn't really help me, because on mine, even the 3 buttons procedure doesn't switch the phone on.
Demazda said:
I found matzehtc's posts. Unfortunately, they didn't really help me, because on mine, even the 3 buttons procedure doesn't switch the phone on.
Click to expand...
Click to collapse
If you charge the phone, is the charging led flashing?
If not, maybe its in some strange loop and its needed to disconnect the battery or wait till it is empty. Disconnecting is a litte bit hard in this phone.
Julsen1985 said:
If you charge the phone, is the charging led flashing?
If not, maybe its in some strange loop and its needed to disconnect the battery or wait till it is empty. Disconnecting is a litte bit hard in this phone.
Click to expand...
Click to collapse
Nope, no flashing led.
I'll wait till it's empty, but it's already been 2 days and it's still not.
Demazda said:
Nope, no flashing led.
I'll wait till it's empty, but it's already been 2 days and it's still not.
Click to expand...
Click to collapse
during my last phone s3 mini i had this problem.....total dead......i went to service center and they changed my cpu ....the problem is when i changed kernel i flashed a wrong kernel that burn my cpu.......
Demazda said:
So I basically made an update to 3.0 beta software made by Huawei for H60-L04, but the update bricked my phone (I think it has to do with the fact I had flashed 3.0 L01 firmware on my L04 some days before).
My phone now won't turn on, even if I plug it or hold Power for more than 20 seconds.
Does anybody know of a way of making it work again? I won the phone through a partnership between Honor and another site I go to, and thus I don't have the invoice, so any RMA return is impossible for me.
Thank you.
Click to expand...
Click to collapse
You don't have adb access into the phone either? I had bricked my phone earlier, but I managed to recover it by accessing the device through a software called QtADB and reverting back to the original system files.
itsnotmeatall said:
You don't have adb access into the phone either? I had bricked my phone earlier, but I managed to recover it by accessing the device through a software called QtADB and reverting back to the original system files.
Click to expand...
Click to collapse
No, I don't have access to that.
But today, Huawei agreed to exchance it for a brand new unit, so I guess it's okay. I just have to send them the bricked phone and I'll get a new one.
Also, thanks to everyone for their answers. I don't think I'll be flashing another Chinese firmware anytime soon now.
Demazda said:
But today, Huawei agreed to exchance it for a brand new unit, so I guess it's okay. I just have to send them the bricked phone and I'll get a new one.
Click to expand...
Click to collapse
How you managed to get feedback from them? I wrote an email one week ago and till now not a single answer
Julsen1985 said:
How you managed to get feedback from them? I wrote an email one week ago and till now not a single answer
Click to expand...
Click to collapse
I wrote them on their Facebook ( https://www.facebook.com/HonorFR ), and they told me to write them an email at their support email ( [email protected] ).
Don't know if you can contact them like that outside of Europe, but you can go there: http://hihonor.com/support and send them an email through here too.
Thx, but it seems the german Huawei Facebook team do not care about giving support. Like the mail support... no reaction.
The German support generally ignores every request seemingly. If then I'd ask the British support (or the French if you can)
Yeah, after nearly 2 weeks they answered my email. They told me that they only give Support for phones which are available on their german page and do not support customer with imported phones.
Gesendet von meinem H60-L04 mit Tapatalk
Got my new unit this morning, and in the meantime I had received my TouchPlus screen protector... I can say it's a really nice combo.
And the French Honor team is really nice, too. They are really fast responding and really seem to care about customers, which to me is a nice thing. I also had a software bug with the Bitcasa app and they said they would contact their dev team to fix it asap, so I'm pretty satisfied with customer support.
Well anyway, thanks everyone here who tried to help me too!
I installed the Nuseven stock 6.0 ROM on my htc one m8 and now I get no service. Can somebody please help me I have entered in the apn stuff and have tried all combination of settings in the 4g switcher app but nothing works.
Werzal123 said:
I installed the Nuseven stock 6.0 ROM on my htc one m8 and now I get no service. Can somebody please help me I have entered in the apn stuff and have tried all combination of settings in the 4g switcher app but nothing works.
Click to expand...
Click to collapse
What is your carrier?
If Verizon, just flash and that's it, no need to mess with any settings.
andybones said:
What is your carrier?
If Verizon, just flash and that's it, no need to mess with any settings.
Click to expand...
Click to collapse
My carrier is 2degrees in New Zealand. It's almost as if installing new roms disabled "unlocked to any network" thing
I payed for s-off so I could install a debloated ROM but i got no service. So i decided to install Viper but still got no service.
Now all I want is for service to work i don't even care about the bloatware since getting rid of it seems to be so fricken difficult.\
Could you please help me in installing the stock rom for my phone and getting service to work?
Werzal123 said:
My carrier is 2degrees in New Zealand. It's almost as if installing new roms disabled "unlocked to any network" thing
I payed for s-off so I could install a debloated ROM but i got no service. So i decided to install Viper but still got no service.
Now all I want is for service to work i don't even care about the bloatware since getting rid of it seems to be so fricken difficult.\
Could you please help me in installing the stock rom for my phone and getting service to work?
Click to expand...
Click to collapse
I'm sorry I'm not familiar or even heard of 2degrees, wish I could help my friend.
Same issue but I'm with page plus which uses the verizon network. I'm on ROM wolla gpe 6.1 MM
I flashed the same ROM, and I''m having the same issue. I have the Verizon HTC One M8. I flashed the RUU hoping it would solve the problem but, I still have zero service. I can't find any fix for this. I have searched far and wide for any solution and I am now at a stand still...
taymo said:
I flashed the same ROM, and I''m having the same issue. I have the Verizon HTC One M8. I flashed the RUU hoping it would solve the problem but, I still have zero service. I can't find any fix for this. I have searched far and wide for any solution and I am now at a stand still...
Click to expand...
Click to collapse
A factory reset from the stock recovery is usually the answer for this. Has to be the stock recovery, not TWRP. They do different things.
I tried that already.
robocuff said:
A factory reset from the stock recovery is usually the answer for this. Has to be the stock recovery, not TWRP. They do different things.
Click to expand...
Click to collapse
When I flashed RUU it took me back to stock recovery. No TWRP or SuperSU. I failed to mention I am Verizon to Straight Talk conversion. Idk if maybe it has something to do with them or not. I just have zero signal whether the phone is activated or unactive.
I have been working on my m8 for the past 7 hours. It was working but I messed it up the same way as you and now I am without service as well. No idea what to do
taymo said:
When I flashed RUU it took me back to stock recovery. No TWRP or SuperSU. I failed to mention I am Verizon to Straight Talk conversion. Idk if maybe it has something to do with them or not. I just have zero signal whether the phone is activated or unactive.
Click to expand...
Click to collapse
Please tell me you found a solution for this mess... It's been a whole day and I'm without service on my phone
Alpha-Retard said:
Please tell me you found a solution for this mess... It's been a whole day and I'm without service on my phone
Click to expand...
Click to collapse
I've been searching man. The be at conclusion I can come up with is finding the correct RUU for you service provider and area. I flashed on for Europe and idk if maybe that has something to do with my poor service. Our phone receives very minimal support due to age.
taymo said:
I've been searching man. The be at conclusion I can come up with is finding the correct RUU for you service provider and area. I flashed on for Europe and idk if maybe that has something to do with my poor service. Our phone receives very minimal support due to age.
Click to expand...
Click to collapse
Finally got service to work by flashing a Verizon RUU even though I'm in Pakistan. It works but I am back on square one, i.e absolutely horrendous signals. The phone is basically useless at this point because it's always on a single bar. I think it's a hardware issue so there's nothing really I can do :/
Hello,
i performed upgrade of firmware (official) of honor 8 pro (from B183 to B185), but during the update it wrote installation failed. Now i have only blue welcome screen of honor, phone cant be switched off, only restarts.
I tried to plug in the charger and enter recovery mode, tried to download the latest version, but it again failed to load info about update.
I tried to wipout cache. Didnt help
I tried to switch phone with volume +- and power button together to install it, but after 5% it stopedd with fail again.
I tried to connect usb cable and perform instal again, only change the graphics from emui logo to USB logo, but again after 5% it failed.¨
I also downloaded former version (before update, B183) and upload it to sd card, but i am not able to run update from sd card.
Do you have any suggestions what to do?
It seems that i am not only one, with this problem and it is probaby the problem with european version.
Only thing i didnt performed is factory reset, but i dont want to unless is necesary.
Thank you
Jan
Hi
I have same problem
What is going on?
Regards
i have same problem. All day fighting with this. Factory reset doesnt work. I try install b183 with no luck. i think we need stock firmware b185 to use in 3 button way cause b183 says "co compatibility"
hack1986 said:
i have same problem. All day fighting with this. Factory reset doesnt work. I try install b183 with no luck. i think we need stock firmware b185 to use in 3 button way cause b183 says "co compatibility"
Click to expand...
Click to collapse
****, i am trying to download B183 stock version, should be 1,7 GB but after download it is 4,34 GB...too big. Where can we find B185 version? I cant find it.
Which version did you tried do you have link? Are you sure you used correct version for Europe/Asia/Russia?
Poldi_21 said:
****, i am trying to download B183 stock version, should be 1,7 GB but after download it is 4,34 GB...too big. Where can we find B185 version? I cant find it.
Which version did you tried do you have link? Are you sure you used correct version for Europe/Asia/Russia?
Click to expand...
Click to collapse
Yes, i use europe version DUK-L09C432B183 as a stock release from XDA. We need to remember that this update change firmware to ...b185 thats why theres no compatibility.
---------- Post added at 09:54 PM ---------- Previous post was at 09:51 PM ----------
How flagship phone dont have support by HiSuite to make reinstallation? Even any way to back to older version when something gone wrong.
hack1986 said:
Yes, i use europe version DUK-L09C432B183 as a stock release from XDA. We need to remember that this update change firmware to ...b185 thats why theres no compatibility.
---------- Post added at 09:54 PM ---------- Previous post was at 09:51 PM ----------
How flagship phone dont have support by HiSuite to make reinstallation? Even any way to back to older version when something gone wrong.
Click to expand...
Click to collapse
I am using same version, so we need little bit older than? Or going back to Marshmellow?
Poldi_21 said:
I am using same version, so we need little bit older than? Or going back to Marshmellow?
Click to expand...
Click to collapse
Tell me how. I can't finde any information that will work. Other side i dont want to make root.
For now i try downgrade to b120, factory reset, other version of this same firmware, install again update of course b183. No where i can finde b185.
hack1986 said:
Tell me how. I can't finde any information that will work. Other side i dont want to make root.
For now i try downgrade to b120, factory reset, other version of this same firmware, install again update of course b183. No where i can finde b185.
Click to expand...
Click to collapse
B120? I am pretty curious how will be your result with this efford.
Poldi_21 said:
B120? I am pretty curious how will be your result with this efford.
Click to expand...
Click to collapse
It doesnt work with b120, still "no compatibility " message
hack1986 said:
It doesnt work with b120, still "no compatibility " message
Click to expand...
Click to collapse
Damn
Poldi_21 said:
Damn
Click to expand...
Click to collapse
We need to whait for others who know what to do with this. Meaby someone get work with this update and make full firmware b185
Poldi_21 said:
Damn
Click to expand...
Click to collapse
It seems that in Czech republic lot of people have same problem, i already have response from EMUI, but it is only recomendation to find local service (WTF) and from official Honor CZ facebook, that they are checking the situation. On phone support, they tell me that i am not the only one, and should visit the service center.
I need solution, how to fix it and not loose data on my phone.
I'am from Poland, we dont have service. I dont have a time to send phone and wait 2-3weeks. I think i few days people from XDA or other sosaity make something to fix it.
hack1986 said:
I'am from Poland, we dont have service. I dont have a time to send phone and wait 2-3weeks. I think i few days people from XDA or other sosaity make something to fix it.
Click to expand...
Click to collapse
Still we don´t have any news regarding the software here in Czech.
The same here in the Netherlands, the update as available yesterday and till now the phone is dead, i tried everything!
If this is a firmware problem , what we should expect, any opinion?
Cause yesterday i realize that some Vmall stores are not available anymore, like here in hollland , so basically there's no support...
What to do ?????
Teikit said:
The same here in the Netherlands, the update as available yesterday and till now the phone is dead, i tried everything!
If this is a firmware problem , what we should expect, any opinion?
Cause yesterday i realize that some Vmall stores are not available anymore, like here in hollland , so basically there's no support...
What to do ?????
Click to expand...
Click to collapse
Seems we have to wait until the official release of software will be, the problem appears big so far. Everyone who upload the software has the same problem.
Poldi_21 said:
Seems we have to wait until the official release of software will be, the problem appears big so far. Everyone who upload the software has the same problem.
Click to expand...
Click to collapse
i did a factory reset and tried to update via wi-fi and didn't work, if they release an update will work?
regards
Teikit said:
i did a factory reset and tried to update via wi-fi and didn't work, if they release an update will work?
regards
Click to expand...
Click to collapse
Need wait. Should work if this gonna be official release. For now this is one fu**ing ****.
I've got same problem, the B185 new version was available this morning for me (in france) that failed like everybody here, and I tried factory reset but it failed too.
Huawei sucks, I dont understand why they didn't stop upgrade propagation...
Same in NL
Same problem here. Recovery through hisuite on pc also failing. Luckily I only had the phone for a week and I can return it for a new one. Won't be updating this (yet to arrive) new one any time soon.....
I had 10ulm and flashed it with the G710AWM and now every time I boot my phone i get:
WARNING: Current version is not available for user. Can't find matched carrier. Check NT-code: FFFFFF : 84
The phone works fine since it was unlocked, but I am getting a ton of calls go straight to voicemail and this may be the issue? How can I fix this?
any help appreciated. Thanks
also wifi calling is nowhere to be found under call settings. It seems like I don't have the setting on this version? thoughts
Don't bother pal, stick with the official rom, I had this same issue best option is to just stick with the same variant as your phone, might not be latest but it works good. FYI I have g710emw and was using g710em rom
rash.m2k said:
Don't bother pal, stick with the official rom, I had this same issue best option is to just stick with the same variant as your phone, might not be latest but it works good. FYI I have g710emw and was using g710em rom
Click to expand...
Click to collapse
You are probably right. What a pain to have to flash again and go back?
How are you guys backing up so that you just restore to the same phone you had without having to set up everything again?
Brighter85 said:
You are probably right. What a pain to have to flash again and go back?
How are you guys backing up so that you just restore to the same phone you had without having to set up everything again?
Click to expand...
Click to collapse
I didn't restore, I tried out the rom first, and then just wiped it. What broke it for me was the wifi mac address somehow became lost while using it, maybe some software glitch only by flashing the same variant was I able to restore it.
Best to root and then backup and restore
Brighter85 said:
I had 10ulm and flashed it with the G710AWM and now every time I boot my phone i get:
WARNING: Current version is not available for user. Can't find matched carrier. Check NT-code: FFFFFF : 84
The phone works fine since it was unlocked, but I am getting a ton of calls go straight to voicemail and this may be the issue? How can I fix this?
any help appreciated. Thanks
Click to expand...
Click to collapse
Just reinstall the kdz with refurbish option
dapolicy said:
Just reinstall the kdz with refurbish option
Click to expand...
Click to collapse
Hey there, how do you do this KDZ with refurbish option? Will this mean flashing again anyways?
I was hoping that by now the official android 10 version from LG would be out for the unlocked 10ulm, but it seems that they will never update this phone for some reason. This was the Google Fi unlocked G7.
Suggestions please. Thanks
Brighter85 said:
Hey there, how do you do this KDZ with refurbish option? Will this mean flashing again anyways?
I was hoping that by now the official android 10 version from LG would be out for the unlocked 10ulm, but it seems that they will never update this phone for some reason. This was the Google Fi unlocked G7.
Suggestions please. Thanks
Click to expand...
Click to collapse
It means flashing the phone again but select refurbish option in lgup
dapolicy said:
It means flashing the phone again but select refurbish option in lgup
Click to expand...
Click to collapse
Thanks for replying.
I noticed you are the leader of the other thread I posted, so I will ask here so not to bug you too much
Will the choosing of refurbish option erase the serial or IMEI or anything else that I should be aware of?
Also, when you say flash again you mean using the canadian version correct? I was wondering about the Korean version vs the canadian and what advantage would there be in any.
If you could, please lead me to the instructions to flash again. When I did it, I used a guide from some dude on youtube and I can't find that again.
Also, read somewhere that the error at boot could be fixed by rooting and then changing something with the explorer app. Not sure if that is worth it. I just hate backing up and restoring to find I am logged out of most every app and all settings have to be set up again. It takes me hrs and I am not that technically savvy as you guys.
Thanks for your time and have a good evening.
Brighter85 said:
Thanks for replying.
I noticed you are the leader of the other thread I posted, so I will ask here so not to bug you too much
Will the choosing of refurbish option erase the serial or IMEI or anything else that I should be aware of?
Also, when you say flash again you mean using the canadian version correct? I was wondering about the Korean version vs the canadian and what advantage would there be in any.
If you could, please lead me to the instructions to flash again. When I did it, I used a guide from some dude on youtube and I can't find that again.
Also, read somewhere that the error at boot could be fixed by rooting and then changing something with the explorer app. Not sure if that is worth it. I just hate backing up and restoring to find I am logged out of most every app and all settings have to be set up again. It takes me hrs and I am not that technically savvy as you guys.
Thanks for your time and have a good evening.
Click to expand...
Click to collapse
Flash with the kdz you used before, Canadian firmware is better than Korean. In lgup select refurbish instead of partition dl. It won't tamper with your IMEI and you will loose all your data
Hi dapolicy,
I am done with the LG G7ULM since it will never be updated officially.
I really like having the fingerprint sensor on the back and it seems that the LG G8 is the last iteration of phones from LG with this feature and it is an upgrade from the G7.
It is cheap here in the US.
Which version of this phone should I look for? I will be using it on Mint Mobile, so an unlocked one sounds great and all, but then you see what happened to the G7 ULM that never got android 10 unless it was tied to a carrier.
So, what do you suggest I do so I can get the next couple of updates for android with the G8?
Thanks man!
dapolicy said:
Just reinstall the kdz with refurbish option
Click to expand...
Click to collapse
I get the sime problem with my LG WING and I don't know to solve it
Daoud ben said:
I get the sime problem with my LG WING and I don't know to solve it
Click to expand...
Click to collapse
If the firehose was available for the Wing/Velvet you can hex the FTM and fix the NT Code on the Wing.You can try the engineering service menu,but I highly doubt the IMPL is 0 under MID.
So a month or so ago I was having issues with my HTC U11 not letting my phone pair with my new Smart Watch. After much trouble shooting decided to do a factory reset. Afterwards found out that do to a glitch Google Backup's weren't going thru and now my phone won't ask for Anything other a PIN number that I don't know. Here is screen shot from Fastboot, phone responds to ADB commands but sadly bootloader is locked S-On and no way to turn on USB debugging or access Developer options from the locked state. I've been trying to flash RRU but so fare no joy all are either failing because they aren't signed or not the correct version. Anyone have any ideas?
I have already bought a new Oneplus Nord N10 and I have an HTC 10 CDMA unlocked and a HTC 10 Bolt CDMA unlocked, so I don't really need the phone... But I'm pissed that my prettiest one is currently bricked and I feel like I'm soooo close to fixing it, just need to find the Right combo... I'm even willing to pay a reasonable amount to anyone that helps get the think working lol I know it can be fixed I just can't figure it out.
danth3hitman said:
So a month or so ago I was having issues with my HTC U11 not letting my phone pair with my new Smart Watch. After much trouble shooting decided to do a factory reset. Afterwards found out that do to a glitch Google Backup's weren't going thru and now my phone won't ask for Anything other a PIN number that I don't know. Here is screen shot from Fastboot, phone responds to ADB commands but sadly bootloader is locked S-On and no way to turn on USB debugging or access Developer options from the locked state. I've been trying to flash RRU but so fare no joy all are either failing because they aren't signed or not the correct version. Anyone have any ideas?
I have already bought a new Oneplus Nord N10 and I have an HTC 10 CDMA unlocked and a HTC 10 Bolt CDMA unlocked, so I don't really need the phone... But I'm pissed that my prettiest one is currently bricked and I feel like I'm soooo close to fixing it, just need to find the Right combo... I'm even willing to pay a reasonable amount to anyone that helps get the think working lol I know it can be fixed I just can't figure it out.
Click to expand...
Click to collapse
you should be able to find the correct one here
Search Files Results for "2pzcimg" | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
I have a known good pie ruu that i use so if all else fails i could give u a download load link,, hth,,,
I'd gladly try it, I used the RUU decoder tool to extract the zips from the RUU that I should be the correct one. I was able to boot into RRU mode and flashed all the zips one at a time that but still no joy. The only error I had during the whole thing was on the first zip and I just flashed it again and it went though without an errors but after reboot it did the little android encryption thingy and then still FRP. if you have a good RUU I'm more than willing to try...
danth3hitman said:
I'd gladly try it, I used the RUU decoder tool to extract the zips from the RUU that I should be the correct one. I was able to boot into RRU mode and flashed all the zips one at a time that but still no joy. The only error I had during the whole thing was on the first zip and I just flashed it again and it went though without an errors but after reboot it did the little android encryption thingy and then still FRP. if you have a good RUU I'm more than willing to try...
Click to expand...
Click to collapse
Another thing you could try if you havent already is go in to your stock recovery partition, there you can select factory reset just to see if that works, if you need help getting to the stock recovery just google it or ask here, also i will pm you with the ruu download link,, hth
Already did that lol I'm downloading the RUU now I'll let you know if that works thanks
JOY! phone fixed and unbricked! OMG hammered58 is a god!
danth3hitman said:
JOY! phone fixed and unbricked! OMG hammered58 is a god!
Click to expand...
Click to collapse
Please , just good luck,, glad it worked,,
The U11 has always been one of my favorite phones and with HTC no longer supporting it I'm glad there's still people like you that are here to keep thier legacy of quietly brilliant phones going
hammered58 said:
Another thing you could try if you havent already is go in to your stock recovery partition, there you can select factory reset just to see if that works, if you need help getting to the stock recovery just google it or ask here, also i will pm you with the ruu download link,, hth
Click to expand...
Click to collapse
hi there! I have the same issue here...can u send me also that llink ? thnx in advance!
kwintie said:
hi there! I have the same issue here...can u send me also that llink ? thnx in advance!
Click to expand...
Click to collapse
I just sent u a pm,, hope it helps
kwintie said:
hi there! I have the same issue here...can u send me also that llink ? thnx in advance!
Click to expand...
Click to collapse
Did it fix your issue?