I have virgin broadband mobile internet, came in a huawei modem.
Been using the sim card, w/out the modem, directly in laptop for 3 years.
Recently, been using it in a huawei wifi/mifi router.
Want to us it now in MZ601, Int'l 3G Xoom.
Have tried numerous variations of APN's, with no luck.
One apn appears to have been installed by default by the sim, but is not able to be edited, and also does not work.
Any idea's/advice?
Considering ditching virgin, going wth optus/voda data sim.
(Virgin themselves appear to know less than me about APN's, and my version is not nextg version, before it is asked..)
Thanks.
After several long calls with Verizon and help from Motorola insiders, I have been given to understand that:
1. Droid Maxx if not activated on Verizon, before leaving US, cannot be used on other carriers (say in Europe or Asia).
The reason is the SIM unlock cannot be done by the customer support since they won't see the device in their network if it is not activated first.
2. The activation cannot happen outside US, since Verizon does not have a network.
So bottom line is get the device activated before you import it from US.
Now, my Droid Maxx is locked to Verizon. I know the boot loader can be unlocked. Will this help me in flashing something that can get rid of the SIM lock that Verizon has in place.
My device is an employee edition so perhaps there was some extra protection added there by Verizon.
Please help.
I do not have a Maxx, but I'm replying because you PM'd me asking to take a look at this thread..
It has been my experience that Verizon's 4GLte phones are sim unlocked (on the GSM side) out of the box. I thought that was a condition of VZW's 700Mhz spectrum auction win? One potential issue is does the phone support the needed bands out of the box (think Bionic where a hack was needed to enable bands needed for T-mobile).
That being said, if your Maxx is truly SIM LOCKED, then unlocking the bootloader wont help you SIM unlock, nor will flashing a 3rd party Rom after unlocking the bootloader.
where are you located, and who is your carrier? Do they use CDMA for voice, or GSM? What happens when you put a non-VZW sim in the phone?
KidJoe said:
I do not have a Maxx, but I'm replying because you PM'd me asking to take a look at this thread..
It has been my experience that Verizon's 4GLte phones are sim unlocked (on the GSM side) out of the box. I thought that was a condition of VZW's 700Mhz spectrum auction win? One potential issue is does the phone support the needed bands out of the box (think Bionic where a hack was needed to enable bands needed for T-mobile).
That being said, if your Maxx is truly SIM LOCKED, then unlocking the bootloader wont help you SIM unlock, nor will flashing a 3rd party Rom after unlocking the bootloader.
where are you located, and who is your carrier? Do they use CDMA for voice, or GSM? What happens when you put a non-VZW sim in the phone?
Click to expand...
Click to collapse
Thanks Mark.
The phone Droid Maxx does support these bands since there are others who are using the same phone on GSM networks in the country.
The networks in India are:
2G capabilities GSM 900, GSM 1800
3G capabilities UMTS 2100
4G capabilities LTE 2300 (this one won't work with the phone, plus my carrier does not have it either)
The CDMA is CDMA 2000 - but I have not been able to try with a CDMA SIM, but that one has a higher probability of working.
When I put a non-VZ SIM, and set to Global mode, it does not detect any signal and the search network does pretty much nothing. The automatic mode tries to connect but then throws an error saying "can't connect to this network at this time"
I am using a brand new nano SIM card (which now is back in my Moto Defy with an adapter.)
Earlier I had a normal SIM converted to a nano SIM and that one did not work, but after I put in APN manually, I was able to access data.
I tried another user's cut-nano SIM and that one worked for data out of the box (another GSM provider).
Ditto for me, but I am using DroidMini... I also have DroidMAXX which is working great (even unlocked its BL and rooted it)...
I am also from India... Using it in GSM networks... I may get one Nano CDMA SIM to test later and will report here for sure...
Thanks...
kanagadeepan said:
Ditto for me, but I am using DroidMini... I also have DroidMAXX which is working great (even unlocked its BL and rooted it)...
I am also from India... Using it in GSM networks... I may get one Nano CDMA SIM to test later and will report here for sure...
Thanks...
Click to expand...
Click to collapse
Well, we have interacted on Rimweb recently.
The radio on the Droid series is the same. The difference between the mini and the maxx in your case is that the mini has never been activated on VZ network and hence it is SIM locked. Whereas, the Maxx would have been purchased as a used item (perhaps just activated and then sold off?). So that takes care of the SIM unlock part.
Yesterday I spend around 60 minutes with global support, VZ.
I escalated the issue to the supervisor.
He checked and said that the IMEI is clean and not in any sort of negative list. So there is nothing else that they can do.
He also said, the phones are unlocked by default for global use.
Obviously they don't want to dig deeper into why three phones are not working on GSM in India.
I am now running out of avenues. Does anyone have some debugging tool which can log what is happening when the phone tries to log on to the network?
s_u_n said:
Thanks Mark.
The phone Droid Maxx does support these bands since there are others who are using the same phone on GSM networks in the country.
The networks in India are:
2G capabilities GSM 900, GSM 1800
3G capabilities UMTS 2100
4G capabilities LTE 2300 (this one won't work with the phone, plus my carrier does not have it either)
The CDMA is CDMA 2000 - but I have not been able to try with a CDMA SIM, but that one has a higher probability of working.
Click to expand...
Click to collapse
The current Droid Maxx that Verizon sells supports the following..
LTE Band 13/4 700/1700
EDGE/GSM: 850/900/1800/1900,
HSPA/UMTS: 850/900/1900/2100 (download speeds to 42.2 Mbps, upload speeds to 5.76 Mbps
From what you listed, the Maxx should get GSM/Edge/HSPA/UMTS coverage there. And of course, no LTE.
The CDMA side of the Verizon phones is still "locked" so I also would not expect CDMA to work. In other words, if your carrier NEEDS CDMA, stop trying.
s_u_n said:
When I put a non-VZ SIM, and set to Global mode, it does not detect any signal and the search network does pretty much nothing. The automatic mode tries to connect but then throws an error saying "can't connect to this network at this time"
I am using a brand new nano SIM card (which now is back in my Moto Defy with an adapter.)
Earlier I had a normal SIM converted to a nano SIM and that one did not work, but after I put in APN manually, I was able to access data.
I tried another user's cut-nano SIM and that one worked for data out of the box (another GSM provider).
Click to expand...
Click to collapse
I've been through this with some trying the Moto X in India, and I've been through it while trying my T-Mobile and ATT sim's in my Verizon Moto X.
From what you are describing, it sounds like your APN settings for your carrier on the phone are not set right.
Example... When I put my T-Mobile SIM into my Verizon Samsung Galaxy S4, I get "unknown sim" and bars, but no network connectivity. Nothing works. By going into the mobile network settings on the phone and adding an APN with the T-Mobile settings, features like calling, SMS, data, etc. start working. I have had occasions where I thought I had the APN right, as calls and data worked, but MMS only partially worked (would send but not receive). When I do have the settings right, everything works. Similar thing happens on my Moto X with T-Mobile SIM.
---------- Post added at 07:12 AM ---------- Previous post was at 07:06 AM ----------
s_u_n said:
Yesterday I spend around 60 minutes with global support, VZ.
I escalated the issue to the supervisor.
He checked and said that the IMEI is clean and not in any sort of negative list. So there is nothing else that they can do.
He also said, the phones are unlocked by default for global use.
Obviously they don't want to dig deeper into why three phones are not working on GSM in India.
I am now running out of avenues. Does anyone have some debugging tool which can log what is happening when the phone tries to log on to the network?
Click to expand...
Click to collapse
Unless you have an active account with Verizon, and are trying to use their service when traveling, Verizon wont help you. In other words, unless you are trying to get your Verizon phone, working on Verizon's Global Roaming service, on your currently active Verizon account, they wont help you.
Even if you are a Verizon customer who is just traveling and popped out your VZW SIM in favor of using a local prepay sim to save data/voice costs, once you pop that VZW SIM out, they wont assist.
But you have received confirmation of what I said.. the GSM side is unlocked.
The SIM you are trying to use is from a GSM India carrier? As long as they only use GSM (no CDMA required), your only hope will be working with them. Telling them your phone is SIM Unlocked and going from there. Or finding a local message board for the carrier, and hope people are discussing use of "3rd party" phones, and you might get some help there.
I really think it will come down to the APN settings for the GSM carrier not being correct on the Maxx.
I can't offer any more than that. Sorry.
KidJoe said:
The current Droid Maxx that Verizon sells supports the following..
LTE Band 13/4 700/1700
EDGE/GSM: 850/900/1800/1900,
HSPA/UMTS: 850/900/1900/2100 (download speeds to 42.2 Mbps, upload speeds to 5.76 Mbps
From what you listed, the Maxx should get GSM/Edge/HSPA/UMTS coverage there. And of course, no LTE.
The CDMA side of the Verizon phones is still "locked" so I also would not expect CDMA to work. In other words, if your carrier NEEDS CDMA, stop trying.
Click to expand...
Click to collapse
I have now put in a CDMA SIM card, but run into another problem with that. I will activate that SIM on another phone and then pop it in the Maxx again and check. But CDMA should work fine as reported by other users.
But the problem is the GSM part, because that is what we need to get working.
Unless you have an active account with Verizon, and are trying to use their service when traveling, Verizon wont help you. In other words, unless you are trying to get your Verizon phone, working on Verizon's Global Roaming service, on your currently active Verizon account, they wont help you.
Click to expand...
Click to collapse
That is bad on the part of Verizon. I have purchased a Verizon device off-contract and that device is a global one. So I am entitled to some support from them even if I am without a service plan.
The SIM you are trying to use is from a GSM India carrier? As long as they only use GSM (no CDMA required), your only hope will be working with them. Telling them your phone is SIM Unlocked and going from there. Or finding a local message board for the carrier, and hope people are discussing use of "3rd party" phones, and you might get some help there.
Click to expand...
Click to collapse
Yes. Local carrier. And for now, there are three such XDA members who have been facing the same issue. In one case, a member was able to make calls and receive calls and also use data. Then after a few minutes, the SIM invalid message popped up.
I really think it will come down to the APN settings for the GSM carrier not being correct on the Maxx.
Click to expand...
Click to collapse
APN settings are pretty easy. I did that with my earlier SIM and I got data working. There was no voice, so I gave that SIM back to the carrier and got a brand new nano SIM. Now, nothing works. The old and new SIM are for the same number and same service provider.
Click to expand...
Click to collapse
s_u_n said:
APN settings are pretty easy. I did that with my earlier SIM and I got data working. There was no voice, so I gave that SIM back to the carrier and got a brand new nano SIM. Now, nothing works. The old and new SIM are for the same number and same service provider.
Click to expand...
Click to collapse
Right, you got just DATA working with the APN settings, but the correct APN settings are also needed for SMS, MMS, Phone calls, etc.
I've had an issue where I had voice but no data, and it was related to APN. I've had an issue where I had voice, SMS, data but no MMS, again, it was related to APN settings for the carrier you are using.
So good luck!
the problem we sorted out to get gsm working in india first the phone must be activated on usa to get it work on india so can anyone help us > @s_u_n
So, after using the phone for a week on GSM with all application updates installed, I can safely state that
1. Verizon activation is not needed for non-VZ networks to work (at least outside US).
2. A full FXZ was installed and it probably solved the modem configuration mess that the phone might have been. Perhaps it unlocked something?
3. Four corner activation bypass method was used (as described in earlier Motorola phones).
Either 2 or 3 solved the problem
There was nothing to do with APN. Data works even without any APN settings out here, just like on my Motorola Defy.
So I just purchased a verizon s6 and I currently have service with metro pcs I want to use my metro pcs service on the Verizon s6 but I'm not sure if the Verizon phone is GSM unlocked I have tried these following steps
When I try to make my Galaxy S6 work on the MetroPCS network it does not work. I already tried changing the APN settings as follows:
Name: Metro PCS
APN: fast.metropcs.com
MMSC: http://metropcs.mmsmvno.com/mms/wapenc
All other settings were kept at default and it still did not work. I put in the SIM card, change the settings and I have no service or data.
I am currently using a Unlocked Tmobile Note 3 on Metro Pcs and everything seems to work fine on that phone.
What am I doing wrong??
Yes it's unlocked "thanks to google" using mine with simple mobile on tmoble network.
Try global mode. And check here.
http://androidforums.com/threads/mms-settings-for-metropcs-with-tmobile-network.864626/
Thank you for the reply I know I'm a little late seeing this response but I will try to do this later on today and let you know how it works out
Just to confirm I have everything working using a Verizon s6 on metro and didn't require any effort other than apn and esn settings changed
Sent from my SM-G920V using XDA-Developers mobile app
I had the same problem using a Verizon galaxy s6 on metro and fix it
Was able to fix it after adding apm as follow
Name
Metro pcs
APN
fast.metropcs
MMSC
metropcs.mmsmvno.com/mms/wapenc
And the most important thing that did the trick
APN type
default,mms,supl
I tried your fix and my s6 won't connect. It connects sometimes to 2g, then I got lte. However it won't do it again. Any help
This is my network settings
Heads up for anyone who uses this phone. I got a couple of these unbranded open market 2g/16gb model 2005-5 via the Visible deal a while ago and tried to activate on Tello and Textnow. Bottom line, the phone will activate but it WILL NOT have LTE speed data. This effectively makes the phone useless to utilize with the TextNow free talk and text plan. It CAN be used with Tello as long as you are good with talk and text and ~128kbps data speed. The funny thing about this entire issue is that the phone works FINE with Sprint proper! Talk/Text/Data all function on Sprint but WILL NOT function on a Sprint MVNO. I have a feeling that this is probably due to APN programming issues (which cannot be done on a stock ROM) It seems the phone is setting a 1x default APN vs the proper MVNO LTE APN. Consultation with Tello Customer Service reveals that this has been an on-going issue for at least 3 months with no ETIC on the horizon. Lastly, if you are wondering WTH I am trying to use the phone on a Sprint MVNO, let me tell you Tello is hands down a great deal, provided you have good Sprint coverage in your local area.
Thanks for the heads up. I've been fighting with mine trying to get LTE all day. Guess I'm going back to my Galaxy S5.
No ETIC
I've gone direct to Lenovo with the issue and after comprehensive troubleshooting and banter back and forth there is no solution to using a moto E6 on a sprint MVNO due to the APN programming issue. The phone will work fine on big Sprint proper but you will suffer degraded or completely unusable LTE function if you activate this phone on a Sprint MVNO for the foreseeable future. All this could easily be solved IF a custom ROM for the e6 could be made wherein it allows the APN settings to be set manually. As with the Moto E 2015 you can activate the phone on an MVNO with the stock rom and then flash the custom rom and manually set the APN to get LTE speed.
Just bought a Moto E6 from Visible. Pop in a 516TQ SIM and I got service. I didn't test the speed but it seems fine with LTE logo.
If I put in the Visible SIM (uses Verizon) or T-Mobile SIM, I can see and change VPN. But with the Tello SIM, the APN cannot be changed. There is simply no manual for APN. However, data is still programmed properly and I can make phone calls and use data. I guess this is fixed from the network side. Now I am wondering if this is also fixed on Moto E4 from Boost.
nookin said:
Just bought a Moto E6 from Visible. Pop in a 516TQ SIM and I got service. I didn't test the speed but it seems fine with LTE logo.
If I put in the Visible SIM (uses Verizon) or T-Mobile SIM, I can see and change VPN. But with the Tello SIM, the APN cannot be changed. There is simply no manual for APN. However, data is still programmed properly and I can make phone calls and use data. I guess this is fixed from the network side. Now I am wondering if this is also fixed on Moto E4 from Boost.
Click to expand...
Click to collapse
I also have E6 and also was wondering if its compatible with Tello.... How are you using it on Tello if only Verizon CDMA frequencies are supported? Also, are you using Tello SIM or Sprint SIM?
I am currently using Samsung S4-L720 with Sprint SIM on Tello. It activated and works without a glitch. I wanted to switch to Motorola e6 but tello website says E6 is not compatible with Sprint Sim (which is what currently use on tello) . Do I need to buy some dedicated Tello Sim then?
user-747 said:
I also have E6 and also was wondering if its compatible with Tello.... How are you using it on Tello if only Verizon CDMA frequencies are supported? Also, are you using Tello SIM or Sprint SIM?
I am currently using Samsung S4-L720 with Sprint SIM on Tello. It activated and works without a glitch. I wanted to switch to Motorola e6 but tello website says E6 is not compatible with Sprint Sim (which is what currently use on tello) . Do I need to buy some dedicated Tello Sim then?
Click to expand...
Click to collapse
While Visible uses Verizon network, the E6 sold by Visible is a factory unlocked phone that works with all 4 major providers.
I used a Sprint SIM SIMOLW516TQ ("D" SIM). I got it some time back for $1 (4 SIMs pack) from Amazon.