This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128
pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect
pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.
gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?
If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!
I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.
Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.
please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.
I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.
Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.
YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App
amoled or samoled though?
My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App
Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?
Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App
I bought an HTC Evo 4G LTE on Friday along with a screen protector and a case. Anyway, I'm no good at putting on the screen protectors, so I asked the phone guy at best buy to put it on. Fast forward to this evening and I noticed what appeared to be 3 small specks of dust that got under the protector, with a larger one. As I was inspecting them, I found that they were actually tiny black circles (think speck of dust size or even dead pixel size). I'm going to be taking the phone back tomorrow for a replacement, but in the meantime, I'm curious what these are? I've done a lot of googling and the closest two pieces of information I've been able to find say they are either dead pixels because they are about the right size and show up best against a white background, or that they are moisture damage.
The question is, which seems most likely? Can dead pixels manifest themselves as circles rather than squares? And also could moisture damage be so minimal that only four little spots appeared? I should point out that the screen protector was the variety that uses a liquid sprayed on the phone to ensure a good clean overlay on the screen, and also that the salesperson used some blasts of compressed air directly on the screen to try and clean it before applying the protector (I've heard thats a big no-no).
I had a similar problem once with a no name chinese tab.
I noticed a bunch of black spots (square) the size of dead pixels all over the screen. I removed the protector and wiped the screen clean. It was tiny specks of dust indeed.
While blowing hot air onto the screen is a big NO-NO, IMO blowing compressed air wouldn't cause damage. Its the heat that damages the LCDs.
Curious how specks of dust would produce that effect, considering they are not uniformly shaped. Anyway, I've got my fingers crossed now that the problem really is dust rather than a bad screen, since I would hate to start this new phone off the same way I started my last one (returned for defective hardware / software 3 times in 3 months).
Thanks for the input and I'll be sure to post up the results tomorrow when I take the phone into the store. I've already discussed it with the store and since the salesperson was the one who installed the protector, if it turns out to be dust, they will replace the $25 protector free.
Turns out it was dust, or some other contamination, but it was UNDER the screen so that, while you could see them with the phone turned off, you couldn't get at them in any way. Home now with a replacement phone, but as my first experience with HTC, I'm not super impressed...
Hi Everyone,
I've searched and read a lot of posts but haven't found the answer I seek!!
I have a Samsung Galaxy SIII, dropped it, and hence cracked screen. I bought a replacement kit as a DIY job and followed all instructions to replace the screen. However.. When I tried to glue down the replacement screen, there didn't seem to be enough glue left over on the edges to hold the screen down flat.
My question is:
What sort of glue is used on the SIII? I want to buy the same product, add some more glue and fix down the screen properly!!!
P.S I've read about the double sided tape alternative, tried it, problem is, it leaves a slight gap and the screen isn't as responsive as it should be.
Thanks in advance
James
So I was playing a game the other day and a waning show up saying System Overheated. I have a Tab 3 7.0 which I bought last week and the thing is that I have not removed the plastic sheet from the back of my tab which comes installed already. Its a sheet of plastic and it was protecting the back of my tab so I thought of not removing it. The thing is that I think maybe that's the problem, heat can't pass Cruz of that sheet. IS IT TRUE??? SHOULD I REMOVE IT?? PLEASE HELP!
I'm pretty sure that plastic was to protect the tab from scratching while it was in the box. You should remove it in my opinion, I mean, lots of android devices don't even come with plastic like that.
Hi,
So i bought a used Note pro and is rly nice but it has a damaged back Cover and bezel (the silver lining around the tablet ). I know from taking it apart that you can just swap out the hole thing. Problem is i can only find the black backcover but not the bezel. Maybe someone here has a hint where to get what i need?
EDIT: Just watched a video. It seems the pro is built differently than the 10.1 2014. They glued the screen to the bezel. That makes it near to impossible to just change the bezel. I'll have to live with a broken bezel then....
Thread can be closed
Borega said:
Hi,
So i bought a used Note pro and is rly nice but it has a damaged back Cover and bezel (the silver lining around the tablet ). I know from taking it apart that you can just swap out the hole thing. Problem is i can only find the black backcover but not the bezel. Maybe someone here has a hint where to get what i need?
EDIT: Just watched a video. It seems the pro is built differently than the 10.1 2014. They glued the screen to the bezel. That makes it near to impossible to just change the bezel. I'll have to live with a broken bezel then....
Thread can be closed
Click to expand...
Click to collapse
Some little superficial damage even on my used p-905. Though I paid 220 € with shipment, not disappointed. I was asking myself the same question about the bezel: thank you for saving my time! If you have like tiny scratches on the screen too consider applying official Samsung screen protector, it's perfectly trimmed and high quality (it hides moderate screen damages perfectly) and doesn't alter the feeling when drawing with pen which for me is a total must.