Hi,
I have a razr hd xt925 (Rogers Canada). I flashed CM11 unified msm8960 (do not remember which version) then when M8 snapshot was release I updated it using Cyanogen updates and currently I am on version 11-20140708-SNAPSHOT-M8-moto_msm8960.
- Android version: 4.4.4
- Kernel: 3.0.101-g41dd045
- build# cm_moto_msm8960-userdebug 4.4.4 KTU84P c5de078e68 test-keys
With the previous build and this current one, the browser (this also happens with chrome) gets frozen after like 15 minutes of usage, I'd say once or twice a day, then the razr reboots.
Other than that, the device is very smooth and much better than original ROM.
Can you help?
Did you clean flashed?
In recovery when going from a Nightly to a Snapshot one should always clean flash to avoid any issues, that is, wipe data factory reset (this wipes cache (including dalvik), data (not internal data). It leaves your phone in a factory state. Also, wiping the /system partition is a good idea, this remove the OS and makes it even more cleaner to install the rom.
Sent from my RAZR HD using XDA Free mobile app
Hydr0id said:
Did you clean flashed?
In recovery when going from a Nightly to a Snapshot one should always clean flash to avoid any issues, that is, wipe data factory reset (this wipes cache (including dalvik), data (not internal data). It leaves your phone in a factory state. Also, wiping the /system partition is a good idea, this remove the OS and makes it even more cleaner to install the rom.
Sent from my RAZR HD using XDA Free mobile app
Click to expand...
Click to collapse
I did that and it went fine for a couple of days then I am back to the same issue. I also did not install any app after flashing. Unfortunately, this will force me to reinstall Rogers ROM 4.1.2 and wait for the official update.
goldfinsh said:
I did that and it went fine for a couple of days then I am back to the same issue. I also did not install any app after flashing. Unfortunately, this will force me to reinstall Rogers ROM 4.1.2 and wait for the official update.
Click to expand...
Click to collapse
Very weird. You can try restoring back stock and clean flashing directly to the snapshot M8, and see how it works. Also, gapps can be the problem too. Make sure you use CM 11 updated gapps, you can find them here:
http://wiki.cyanogenmod.org/w/Google_Apps
Hope this helps.
Sent from my RAZR HD using XDA Free mobile app
Hydr0id said:
Very weird. You can try restoring back stock and clean flashing directly to the snapshot M8, and see how it works. Also, gapps can be the problem too. Make sure you use CM 11 updated gapps, you can find them here:
http://wiki.cyanogenmod.org/w/Google_Apps
Hope this helps.
Sent from my RAZR HD using XDA Free mobile app
Click to expand...
Click to collapse
I did all that. I refalshed stock ROM then rooted, installed CWM, then flashed cache, dalvik, data, and formatted system. I then installed M8 but still the device freezes occasionally and reboots.
goldfinsh said:
I did all that. I refalshed stock ROM then rooted, installed CWM, then flashed cache, dalvik, data, and formatted system. I then installed M8 but still the device freezes occasionally and reboots.
Click to expand...
Click to collapse
I will try to reproduce your issue to see if this is not only you. I mostly use Firefox for more than 15 minutes, reading and stuff, and have never noticed that. Going to do the same with chrome for the same amount of time and see what happens.
Sent from my RAZR HD using XDA Free mobile app
Related
I have couple of question and need some help. With the new AOKP nightlies being release every 3 days or so, I would like to stay updated on them. So when I download them and proceed to update and flash over the old nightly. (Wipe Cache, Wipe Dalvik Cache) Upon reboot everything is gone icluding Gapps and seems that it instead of just updating the rom and keeping everything, It updates everything and wipes clean as if it was a fresh flash instead of a update flash ("Dirty flash"). Does anybody know why this happens? Is it that with the AOKP nightlies, you just have to always do a clean install and flash?
MichaelDrakeMS said:
I have couple of question and need some help. With the new AOKP nightlies being release every 3 days or so, I would like to stay updated on them. So when I download them and proceed to update and flash over the old nightly. (Wipe Cache, Wipe Dalvik Cache) Upon reboot everything is gone icluding Gapps and seems that it instead of just updating the rom and keeping everything, It updates everything and wipes clean as if it was a fresh flash instead of a update flash ("Dirty flash"). Does anybody know why this happens? Is it that with the AOKP nightlies, you just have to always do a clean install and flash?
Click to expand...
Click to collapse
When I do this it causes my keyboard to f/c but my apps are still there
Sent from my Galaxy Nexus using xda app-developers app
dustinhayes93 said:
When I do this it causes my keyboard to f/c but my apps are still there
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I can see why the keyboard won't work. That might be due to having to re install Gapps. But I don't understand why every time I update to the new nightlies, all my stuff is gone and it's like a full wipe fresh install/flash. Does anybody know how to avoid this from happening? Or is it that AOKP nightlies won't allow these types of updates.
I don't think there is a way around this. I've been using aokp for awhile and i just keep all my apps backed up so i can restore them after install.
Okay. Thank you for the help.
Sent from my One X using xda app-developers app
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
cheeta123 said:
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
Click to expand...
Click to collapse
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
he's is in a habit of writing 'flush' in place of 'flash' (see his other posts)
sent from my A2 running ÑÜMÅ3.0
$ÇÏÊÑÇÈ is the only TRUTH
Re
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
cheeta123 said:
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
Click to expand...
Click to collapse
i think this rom can be install via BMM only... my friend has do like what you do before..... the only you can do is FXZ to stock,root,and then go to play store, install BMM 0.3..... dont install bootstrap.apk again after installing BMM and you will be fine...
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
blazebud350 said:
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
Click to expand...
Click to collapse
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Super_Commando said:
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Click to expand...
Click to collapse
Yeah. I flashed the kexec version and it booted up fine... Thank you.
Has anyone figured out a way to prevent boot loops when rebooting CM10.2 that doesn't involve wiping the device and reinstalling CM10.2 and GAPPS (if you're lucky to even get this to work)?
Went from stock 4.1.2 (unlocked and rooted, before the most recent patch)
Wiped data/cache/dalvik
Installed Skrilax 8/5 nightly and 7/29 GAPPS
Wiped data/cache/dalvik again
Booted up system, installed apps and messed around, then turned phone off. Now the phone sticks at the M logo (or unlocked bootloader, whatever you have showing).
uncgecongrad07 said:
Has anyone figured out a way to prevent boot loops when rebooting CM10.2 that doesn't involve wiping the device and reinstalling CM10.2 and GAPPS (if you're lucky to even get this to work)?
Went from stock 4.1.2 (unlocked and rooted, before the most recent patch)
Wiped data/cache/dalvik
Installed Skrilax 8/5 nightly and 7/29 GAPPS
Wiped data/cache/dalvik again
Booted up system, installed apps and messed around, then turned phone off. Now the phone sticks at the M logo (or unlocked bootloader, whatever you have showing).
Click to expand...
Click to collapse
Sounds like you didn't initially wipe your system. You're going to have to start over
sent from my xt926 RAZR maxx hd
Wiping was the first thing I did after doing a backup, before I installed the ROM. I assume if I hadn't wiped to start I wouldn't have been able to boot CM to begin with, which I was able to do.
I recall this being a known issue, but was just curious if anyone had come up with an answer and hadn't posted yet.
Sent from my DROID RAZR HD using xda app-developers app
I didn't have this issue when I ran CM10.2.
Sent from my DROID RAZR HD using Tapatalk 4
mentose457 said:
I didn't have this issue when I ran CM10.2.
Sent from my DROID RAZR HD using Tapatalk 4
Click to expand...
Click to collapse
I'm only running CM10.1, but I did notice on my first boot it seemed to hang on the CM loading screen for a long time (a few minutes). This was because like a noob I accidentally wiped modem. I had to use the Droid Utility's factory restore, then restart the wipe & flash process.
What did work:
I used CWM's format options to mount then wipe system/data/cache (in that order), and remount them. Then went back to the main CWM and ran the Factory Reset and Wipe Cache options, verified that system/data/cache were still mounted, then flashed from external SD the CM nightly and GApps.
I want start by saying that I did not take the 4.3 OTA from Verizon. I flashed my phone from 4.2.1 to 4.4.1 cm11 and various KitKat Roms. My last being mastamoons version. I wanted to flash back to a 4.3 TW ROM for stability. KitKat has been wonderful the days it decided to be 100% stable. But the myriad of issues plaguing my daily apps, freezing or phone rebooting warranted a flash to TW 4.3. I made a forum post because I was not entirely sure how to flash from 4.4 AOSP back to 4.3 TW and the advice given to me on CleanROM 8.1 thread was to format data, cache, dalvik and flash the zip. I did so and everything was fine. No bootloop (yet, kinda. Will get to that). So my phone rebooted and the first try got me to the start screen. Here is where things go wrong. It asks me for my PIN or Password as if it is encrypted. I've never encrypted my phone so I was perplexed. I thought maybe I triggered KNOX? But CleanRom 8.1 is touchwiz. But it doesn't not include KNOX from what I've read. I've wiped system and tried multiple methods of formatting the phone and I always get back to the same problem .
Sent from my SCH-I535 using xda app-developers app
The bootloop I solved after
I formatted /system. I even restored my previous cm10.2.1 backup which was on 4.3 and I did a manual factory reset from settings. Then I formatted data, cache, dalvik and still nothing.
Sent from my SCH-I535 using xda app-developers app
ErikFry said:
The bootloop I solved after
I formatted /system. I even restored my previous cm10.2.1 backup which was on 4.3 and I did a manual factory reset from settings. Then I formatted data, cache, dalvik and still nothing.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Try doing a complete wipe. What recovery are you using?
I have wiped system, data and cache. Isn't that a full wipe? I'm running the latest clockwork mod recovery. Thank you for your response.
Sent from my SCH-I535 using xda app-developers app
ErikFry said:
I have wiped system, data and cache. Isn't that a full wipe? I'm running the latest clockwork mod recovery. Thank you for your response.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Try another recovery maybe? I did get your PM
Sent from my S3 on AOKP
ErikFry said:
I have wiped system, data and cache. Isn't that a full wipe? I'm running the latest clockwork mod recovery. Thank you for your response.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
You need to wipe your internal sdcard. Backup any important files to your external SD or a computer. Then wipe everything. System. Data. Internal SD card. Caches. Format system. Then flash the modem in the op if you haven't already. Should be in the op of the ROM you want to flash. Then flash the ROM. Might take up to 10-15 minutes for initial boot so be patient. You should be all good from there.
[email protected]'$ [email protected]@XY- eliminate white backgrounds and any form of ics/holo blue.
Thanks man. Will try tonight.
Sent from my SCH-I535 using xda app-developers app
Hi,
I had CM 10.1 by scott, now I'm trying to install CM 11, can I do it directly from CM 10.1?
I tried to do that, and instalation aborted by error 7, now my phone is not starting anymore, it only goes to recovery mode..
Help please!
01:12am
I noticed I was then on CWM 6.0.5.0 suddenly..
I wiped data, wiped cache, wiped dalvik cache, mounted system anda data. Tried to install again and it worked!
It's not working as I expected. Battery life is like half the time it was before on CM 10.1. Anyone having the same issue?
Sent from my SGH-I997 using XDA Free mobile app
Anyone put another Kit kat ROM? Is there one more stable than that Cm11?
Sent from my SGH-I997 using XDA Free mobile app
jloibman said:
Anyone put another Kit kat ROM? Is there one more stable than that Cm11?
Sent from my SGH-I997 using XDA Free mobile app
Click to expand...
Click to collapse
CarbonROM supposedly is...
http://forum.xda-developers.com/showthread.php?t=2137800
Tried it out for a short while. Except for a FC on the setup wizard (first wipe), looks pretty solid.
Sent from my Asus MeMO Pad 8"
Thanks! Just flashed it!
Seems Ok, testing now..
Sent from my SGH-I997 using XDA Free mobile app
jloibman said:
Thanks! Just flashed it!
Seems Ok, testing now..
Click to expand...
Click to collapse
A new CM11 ROM is also out.
Good practice is to do a full factory reset, wipe dalvik, format system, format sdcard0 (some even advocate formatting it twice). Then load your zip, then gapps. Then wipe cache and dalvik (again).
I usually load BaNkS minimal gapps. Very thin, and I let the playstore take care of the rest.