I rooted my device and installed CWM and CyanogenMod 11 however CM11 is stuck on the boot screen and I cant get back into the recovery. Even if i could I do not have another ROM saved to the phone. I am stuck in the bootloader. Does anyone know how I can fix this?
1. Did u make a backup? This is a MUST for installing custom roms but since your here i assumed u didnt. 2.Now since u can boot into bootloader your not "bricked" your actually soft brick so dont worry all is fine. 3. All u have to do is revert to your stock firmware and the guide can be found here http://forum.xda-developers.com/showthread.php?t=2542219 after u revert reboot your phone then I suggest go and flash TWRP recovery because ROMs didn't boot when I had cwm installed on my moto g .. After u flash TWRP Recovery MAKE A BACK UP then flash CM11 one more time and u should be up and running
Related
I have 6.0 CWM recovery and kitkat 4.2.2 . However due to battery issue , I decidedd to move back to stock rom .
I downloaded the stock recovery and stock ROM in .zip format
Booted in recovery mode and flashed stock recovery. Then I did REBOOT RECOVERY …I think I made a mistake here
Woosh , after that I cant do anything . , Using hard reset (recovery) option (home+power+pow down ), recovery loop just like hard reset , normal restart I cant see anything .
SO now basically I have
4.4.2 rom and stock recovery .
BTW KDZ also not detecting the phone ..
Please help ..:crying:
[brother i also have a same situation i cant go back to previous recovery and to any other roms pls help meee
got it fixed
rijukrishnan said:
[brother i also have a same situation i cant go back to previous recovery and to any other roms pls help meee
Click to expand...
Click to collapse
I was able to fix it .
used LGDMP
http://lg-p500-optimusone.blogspot.in/p/flash-stock-rom-custom-recovey-by-lgmdp.html
hope this help . now i m back in stock rom and recovery .
after this I flashed with KDZ just to make sure ..
hello when i open the bootloader on motog install cwm recovery and now always boot cwm recovery pls help
and can i replace ?
of course you can replace it. what do you want on it? TWRP or philz . you can flash either if you don;t want CWM. :good:
thanks now using official firmware i have root acess and the bootloader is unlocked have twrp just how to install langues hun?
Hey guys. Can you please help me with my bricked moto g lte? i wanted to flash cm 12 so i unlocked the bootloader and flashed a custom kernel. i tried to flash the zip, but the recovery didnt flash it right, so i decided to return to stock rom. i flashed the stock rome thrue fastboot but when i start the phone it just shows the bootloader unlocked warning and it doesnt boot. when i try to flash a recovery and then to install a .zip CWM always sais that it cant mount syste or sdcard. can ou please help me to flash a stock rom?
try this?
http://forum.xda-developers.com/moto-g/orig-development/bootloader-tool-motoflasher-t2959076
Hi guys,
I have a Moto G2 currently and I have rooted it through KingRoot which was successfully done. After that, I had download the APK of Flash Image GUI and I tried to flash a custom recovery. After that, I tried to boot into recovery but it was showing:
hab check failed for recovery
failed to validate recovery image
Boot up failed
However, I can boot my phone up but it takes way way more time than it usually takes. My Bootloader is locked. I seriously dont know what's happened to my phone. Some plz help me. The phone shows the Motorola logo for few minutes and then turns off for a second and then boots up again and then after 5 minutes it boots up properly. I dont know how to unlock bootloader and all as I have just come from a Samsung S3 which was very easy to root and flash a recovery(thru Odin). I wanted to erase the user data in my phone. I tried thru recovery it didnt happen, i tried thru settings and it just tried to boot to recovery but couldnt and showed the above command. Plz help guys as I want a stock recovery or any other recovery so I can flash a custom ROM. I saw many forums and couldnt find a single problem like this so I came here .
Thanks a lot guys I just had to unlock the boot loader and return to stock 5.0.2 via a windowstool. I had bricked my device trying to install CM12.1 Nightly and the windows tool helped me so much u have know idea.
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
sainitish said:
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
Click to expand...
Click to collapse
Just download ur stock rom and flash it with SP flash tool