Database Info

Sensation ICS no start

Hello, I'm a Noob xD
I was using miui in my sensation but i decided to downgrade to ICS and use stock images for this device...
I followed instructions of this thread...
http://forum.xda-developers.com/showthread.php?t=1749789
flashed firmware...
flashed ROM thru CWMR 6.0
and when I turn on the phone starts with the HTC logo then makes a sound and shows again the HTC logo and quietly brilliant but nothing happens and I wonder what I'm doing wrong...
I hope community can help me to solve this mistery
Thanks in advance...

Are you S-ON or S-OFF?
Sent from my HTC Sensation 4G using xda premium

ganeshp said:
Are you S-ON or S-OFF?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
S-OFF and the deviced was rooted.
About superCID I don't have idea I bough the phone AlreadS-OFF and rooted but with Ginger Bread what I did is change firmware and installed miui but i would like to use stock ICS....
Thank you

gowmimx said:
S-OFF and the deviced was rooted.
About superCID I don't have idea I bough the phone AlreadS-OFF and rooted but with Ginger Bread what I did is change firmware and installed miui but i would like to use stock ICS....
Thank you
Click to expand...
Click to collapse
ok can you post the details of the bootloader completely ?

ganeshp said:
ok can you post the details of the bootloader completely ?
Click to expand...
Click to collapse
-Revolutionary-
PYRAMID PVT SHIP S-OFF RH
HBOOT-1.27.1100
RADIO-11.24A. 3504. 31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012 17:33:34
===========================================
Thanks for your help =)

gowmimx said:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RH
HBOOT-1.27.1100
RADIO-11.24A. 3504. 31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012 17:33:34
===========================================
Thanks for your help =)
Click to expand...
Click to collapse
Did you wipe data or do a full wipe in recovery before flashing the ROM?

Jonny said:
Did you wipe data or do a full wipe in recovery before flashing the ROM?
Click to expand...
Click to collapse
Yeap... wiped cache,data,dalvik cache and system...
I was checking that the phone's model is PG58110 i don't know if this is making all the trouble...

to check if you have supercid: boot the device into bootloader
connect via usb to pc,open a command window and do
fastboot getvar cid
if it shows you 11111111 then you have supercid
if not then do
fastboot oem writecid 11111111 (to change CID)
fastboot reboot-bootloader(bootloader will reboot)
fastboot getvar cid(it will confirm your CID as 11111111)
after that install fw(from bootloader but first rename it as PG58IMG) for stock ics and then the stock rom
best wishes
edit:don't forget to superwipe first

rzr86 said:
to check if you have supercid: boot the device into bootloader
connect via usb to pc,open a command window and do
fastboot getvar cid
if it shows you 11111111 then you have supercid
if not then do
fastboot oem writecid 11111111 (to change CID)
fastboot reboot-bootloader(bootloader will reboot)
fastboot getvar cid(it will confirm your CID as 11111111)
after that install fw(from bootloader but first rename it as PG58IMG) for stock ics and then the stock rom
best wishes
edit:don't forget to superwipe first
Click to expand...
Click to collapse
Sorry for delay... I'm using windows 8 and the %&$# drivers don't work on 8 all drivers installed need to be signed...
well i confirm that I'm supercid and i didn't know it xDD
that's what I did....
rename the .zip installed the firmware and then the stock ICS but i don't know what I'm doing wrong...
Why when I install MIUI with JB 4.1.1 works and when I install stock ICS doesn't? MIUI it's a great rom but my battery lasts 4 hrs and I don't like that! and front camera is not working
Please help this noob xDD
Regards

Install htc sync on windows 8 that will automatically install the drivers..
Also if you are supercid.. Then I would request you to change back to your original cid
Ye this suggestion seems meaningless but one guy just like you has the same problem.. But when changing his cid to actual one then everything started working
For changing cid
fastboot oem writecid <your cid>
Eg: fastboot oem writecid HTC__001
The above command should be typed with phone connected from bootloader to pc ( phone reads fastboot usb after this)
Sent from my HTC Sensation 4G using xda premium

ganeshp said:
Install htc sync on windows 8 that will automatically install the drivers..
Also if you are supercid.. Then I would request you to change back to your original cid
Ye this suggestion seems meaningless but one guy just like you has the same problem.. But when changing his cid to actual one then everything started working
For changing cid
fastboot oem writecid <your cid>
Eg: fastboot oem writecid HTC__001
The above command should be typed with phone connected from bootloader to pc ( phone reads fastboot usb after this)
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
OK but the I don't know what CID is the original of this phone because... i bough it with all the changes s-off, supercid,rooted and I didn't know it

gowmimx said:
OK but the I don't know what CID is the original of this phone because... i bough it with all the changes s-off, supercid,rooted and I didn't know it
Click to expand...
Click to collapse
i can only think one thing if you don't want to stay with miui rom
flash a ruu.exe for your device and start from the beggining.see here
http://forum.xda-developers.com/showthread.php?t=1672425

rzr86 said:
i can only think one thing if you don't want to stay with miui rom
flash a ruu.exe for your device and start from the beggining.see here
http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
Ok I have read the post I will give it a shot..
Hope this can solve the problem
Thanks for the tip

gowmimx said:
OK but the I don't know what CID is the original of this phone because... i bough it with all the changes s-off, supercid,rooted and I didn't know it
Click to expand...
Click to collapse
OK you were right i changed CID to HTC__001 and now I'm on android 2.3.3 sense version 3.0 using RUU that rzr86 recommended but now how do I install ICS xDD
I need to do more research I also use Galaxy Nexus and is easier than a HTC u.u

gowmimx said:
OK you were right i changed CID to HTC__001 and now I'm on android 2.3.3 sense version 3.0 using RUU that rzr86 recommended but now how do I install ICS xDD
I need to do more research I also use Galaxy Nexus and is easier than a HTC u.u
Click to expand...
Click to collapse
Run a ICS ruu
Find the Europe unbranded one 3.33.401.6 (3.33.401.106 if xe) and run it.. Check for pyramid shopped roms thread in sensation development section.. It has all the ruu's
Sent from my HTC Sensation 4G using xda premium

ganeshp said:
Run a ICS ruu
Find the Europe unbranded one 3.33.401.6 (3.33.401.106 if xe) and run it.. Check for pyramid shopped roms thread in sensation development section.. It has all the ruu's
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
I've installed finally ICS on HTC sensation with the RUU!
Thanks to everyone who helped me in all this process and as a conclusion... maybe being supercid is not a good idea because that the main reason i could not install roms...
I dont know why because is suposed to that... anyway... thanks again
Regards

[Q] RUU won't work

I have been trying to run a RUU to unroot the phone before I bring it in for a repair. I keep getting the 155 error and I searched through google for help on the error. I have read a few post about it but nothing works. I tried to run it through fastboot as well and that does not work. My phone information while in bootloader is Evita pvt ship s-on rl hboot 1.09.0000 radio .17.32.09.12 and I am running cleanrom v 6.5 as my rom. Since my rom and boot.img is based of 3.18 I tried to run the ruu on 3.18. Im not sure if its because it is an older verdion of bootloader while im running a rom that is based off the 3.18. So I also tried to flash a older rom and run the ruu for 1.73 but that didnt work either. Im stumped and very frustrated so please I need your help.

Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium

Arrow44 said:
Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Yeah for the 3.18 its http://bugsylawson.com/HTCFiles/Evi....24p.32.09.06_10.130.32.34_release_signed.exe
and for the 1.73 its http://www.ponack.net/designgears/b...73.502.2_2FE6772699D8596307CC997452BB8D25.exe
Also I read that in order to use the RUU correct I need to soff the phone, but then I cant upgrade the firmware to jellybean. Do you know if this is correct?

The phone will brick if you try to ruu or update to 3.18 while S-ON and superCID. Your CID right now, no doubt is 11111111. When the RUU runs it checks to see what your CID is, if it's not what it should be, it gives an error. If you change your CID back to CWS__001 you can run the 1.73 RUU but you can never update to 3.18 unless you S-OFF first or you'll brick.
to check your CID fastboot oem readcid.
You can change it once without S-OFF with fastboot oem writecid CWS__001 but you can't change it again with that command unless you're S-OFF

Arrow44 said:
Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
exad said:
The phone will brick if you try to ruu or update to 3.18 while S-ON and superCID. Your CID right now, no doubt is 11111111. When the RUU runs it checks to see what your CID is, if it's not what it should be, it gives an error. If you change your CID back to CWS__001 you can run the 1.73 RUU but you can never update to 3.18 unless you S-OFF first or you'll brick.
to check your CID fastboot oem readcid.
You can change it once without S-OFF with fastboot oem writecid CWS__001 but you can't change it again with that command unless you're S-OFF
Click to expand...
Click to collapse
Ok thanks. Im in the process of doing the S-OFF right now. What I want to do is get rid of the red text and make my phone look like the bootloader is locked and never tampered with. I remember doing this with my EVOLTE so it will look like the phone is S-ON and locked. After all that run the RUU for 2.20 so it can get repaired. Now after the repair I can root again and upgrade to the Jellybean firmware right?

cables2590 said:
Ok thanks. Im in the process of doing the S-OFF right now. What I want to do is get rid of the red text and make my phone look like the bootloader is locked and never tampered with. I remember doing this with my EVOLTE so it will look like the phone is S-ON and locked. After all that run the RUU for 2.20 so it can get repaired. Now after the repair I can root again and upgrade to the Jellybean firmware right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2156368

[Q] No more Bootloader

Hello XDA community!
I recently had a problem with my HTC one XL, the AT&T version. I know I'm not in the right section but, as both phone are very similar, I would like to know if anybody as already encouter a problem as mine.
I recently try to convert my HOXL into an international version by following this tuto. http://forum.xda-developers.com/showthread.php?t=2356401
Everything was fine until the point 4.b. To make quick, (more informations on my thread http://forum.xda-developers.com/showthread.php?t=2430573 )
As said in the tuto, my HTC One get stuck at about 3/4 completed, So I reboot it, and type the folling commands: "fastboot oem writemid PN0710000" but instead of getting a successful message, I get an error
<bootloader> [ERR] Command error !!!
OKAY [ 0.009s]
finished. total time 0.009s
I've been stuck on the black HTC screen with 4 triangles and "!" in each corner until I found a command on the web "fastboot oem boot". After this command, the phone has booted directly on the viper boot screen but without the white HTC screen "Quietly Brilliant". Now, my phone is working perfectly, as before under the Viper rom. But when I reboot the phone there is no more the HTC screen, and moreover, I no more have the bootloader ! If I reboot the phone and select the "reboot to bootloader" option, my phone go back to the black HTC screen with 4 triangles and "!" in each corner.
I would like to go back in stock rom, but I'm afraid to flash my phone without bootloader. I think it's to risky. So do you think I can fix my bootloader before flashing ? Anyone already had kind of problem like this one ?
My phone is Tampered unlocked, S-OFF, I was in super CID, but I get back to the original ROGER001.
Thanks for reading...

That's not a tutorial for this phone. The title indicates that it's how to turn an at&t HTC One into an intentional HTC One. You've tried to flash firmware that isn't intended for your device. If you can still boot it up it might be recoverable.
I'd suggest you try running a Rogers RUU (one that's actually for your phone) to see if it helps. I don't know if it will though.
In future don't go looking all over the place, stay in the One XL forum and only EVER flash software/firmware from it. You'll find it here.
Sent from my Evita

I ended up in a state similar to yours once.
Fastboot was still working so I flashed a modified hboot from this thread and then I was able to boot into bootloader. from there I think I ran an RUU.

exad said:
I ended up in a state similar to yours once.
Fastboot was still working so I flashed a modified hboot from this thread and then I was able to boot into bootloader. from there I think I ran an RUU.
Click to expand...
Click to collapse
Seems to be a good idea, but unfortunatly my hboot is 1.11 and there is no hboot 1.11 file ...

That's because you've put a non One XL bootloader on your phone by following that tutorial. You're not looking for an RUU that matches your current setup, you're looking for an appropriate RUU for your phone.
I suggest you do a lot of reading and learning before you attempt anything else though, you're in way over your head which is pretty dangerous as you've found out.
Sent from my Evita

timmaaa said:
That's because you've put a non One XL bootloader on your phone by following that tutorial. You're not looking for an RUU that matches your current setup, you're looking for an appropriate RUU for your phone.
I suggest you do a lot of reading and learning before you attempt anything else though, you're in way over your head which is pretty dangerous as you've found out.
Sent from my Evita
Click to expand...
Click to collapse
Yeah, I admit that it's a bit complicated... I use to flash rom on phone but I found it's very special on HTC's phone !
BUT, maybe (and certainly you're gonna proove me I'm wrong!^^) I think bootloader 1.11 is also good for HTC one XL. I've been looking at the link in you signature, and in that link there is stock RUU for HTC one XL : Stock ruu and related > HTC OTA and RUU collection > brings us here http://forum.xda-developers.com/showthread.php?p=37227608
And here, in ROGER cannada there is this one with my hboot :
1.94.631.3
File Timestamp: 29/06/12
Publically Seen: 30/07/12
Android: 4.0.3
Kernel: 3.0.8-01169-g209f9dc
hboot: 1.11.0000
radio: 0.18as.32.09.28L_10.103.32.24
adsp: 28.1.0.32.0504
wcnss: 1031120A
tp_syn3202: 3.0_PR1100755
tz: 001.031.511
sbl1: 001.031.503
sbl2: 001.031.501
sbl3: 001.031.502
OTA: OTA_Evita_UL_Rogers_WWE_1.94.631.3-1.73.631.1_release_268994d5lde1latibkco05.zip
RUU: RUU_Evita_UL_Rogers_WWE_1.94.631.3_Radio_0.18as.32 .09.28L_10.103.32.24L_release_268972_signed.exe
Source: evita-ics-crc-3.0.8-209f9dc.zip
Am I completly wrong ?!

No you're not wrong, I was wrong, that is an RUU for our phone. As long as you're still s-off you should be ok to run that. You might want to take Exad's advice and fix up your hboot first though.
Sent from my Evita

The tutorial linked in the OP seems so convoluted. If the OP already has S-off, why bother with this stuff? You were already in a state (S-off) where you could flash whatever you want, whenever you want. Not have to wait around for OTAs and be limited by stock firmware.

timmaaa said:
No you're not wrong, I was wrong, that is an RUU for our phone. As long as you're still s-off you should be ok to run that. You might want to take Exad's advice and fix up your hboot first though.
Sent from my Evita
Click to expand...
Click to collapse
Ok, that's what I've planned to do but,as I said it before, in Exad's topic, there is no my hboot, do you know where can I find mine ?
redpoint73> what do you call "OP" ?!

The OP is the original post, as in your first post. It's also short for original poster, as in you
There are multiple links to downloads in the thread Exad linked to.
Sent from my Evita

timmaaa said:
The OP is the original post, as in your first post. It's also short for original poster, as in you
There are multiple links to downloads in the thread Exad linked to.
Sent from my Evita
Click to expand...
Click to collapse
Okay,I've read the whole topic, but there is no 1.11 to dowload. But there is people which were in 1.11 just like me and flash 1.09.
So gonna try with 1.09

You can get hboot 1.11.0000 inside any OTA that shipped it, eg Rogers 1.94.
I am not following why you want hboot 1.11, you can upgrade hboot to 1.14.
Typically downgrading hboot is harder than upgrading it
Why not just flash the AT&T 3.18 RUU?

twistedddx said:
You can get hboot 1.11.0000 inside any OTA that shipped it, eg Rogers 1.94.
I am not following why you want hboot 1.11, you can upgrade hboot to 1.14.
Typically downgrading hboot is harder than upgrading it
Why not just flash the AT&T 3.18 RUU?
Click to expand...
Click to collapse
EXCELLENT !
I had my bootloader back !!! (and the white HTC screen !)
Thank you to all of you... Really !
Gonna ask you few more questions ...
I 'm now TAMPERED, unlocked, S-OFF super CID, hboot 1.09. It means that I can install a european RUU right now ? Nothing else to do than plug the phone and run the RUU ?

As long as you run an RUU meant for your phone you should be fine.
Sent from my Evita

timmaaa said:
As long as you run an RUU meant for your phone you should be fine.
Sent from my Evita
Click to expand...
Click to collapse
Hey !
Still having a problem ...
I'm trying to put a french RUU (the only one I've found...) RUU_EVITA_UL_ICS_40_S_Vodafone_FR_2.34.163.2_Radio_0.20os.32.09.10_2_10.113.32.28L_release_275673_signed
But I got an error when I tried to flash my phone:
An error (-5001 : 0x0070002) has occured while running the setup .....
I've read that it's because I'm trying to downgrade or something like that... I've been typing fastboot getvar version-main
Version-main: 3.17.707.1
So, what can I do ?
[edit] I'm not looking especially for a french version if there is some kind of HTC "pure" international version...

Are you sure you're s-off? Click on the link in my signature, it's a resource thread and there you'll find RUU threads.
Sent from my Evita

timmaaa said:
Are you sure you're s-off? Click on the link in my signature, it's a resource thread and there you'll find RUU threads.
Sent from my Evita
Click to expand...
Click to collapse
Yes, I'm sure. I've been into differents threads, I always find this vodafone RUU (which I just see isn't a "naked" RUU)
There is no HTC evita "international" RUU ?

Check here, the HTC Hong Kong RUUs are WWE.
Sent from my Evita

timmaaa said:
Check here, the HTC Hong Kong RUUs are WWE.
Sent from my Evita
Click to expand...
Click to collapse
Hello !
I'm stuck with an other problem right now. (hope it's gonna be the last !). I've put the EVITA vodaphone FR RUU and everything is working perfectly. But, when I try to do an OTA with the phone, it doesn't work: thephone download the OTA but when finished, I got a message saying it's not gonna be installed because of differrent version...
I've been looking for a solution in the forum, but most of the time it just say to relocke the bootloader, and flash an original recovery. That's what I've done from the .zip of a vodafone FR that I've found. I even try to put the vodafoneFR CID instead of the superCID, but I still got the same error...
Am I missing something ?

You can't install an OTA on a modified phone. If you want to use Android 4.2.2 / Sense 5 why don't you just flash one of the many ROMs available in our development section? They're all based on the official update.
Sent from my Evita

[Q] Set Telstra HTC One XL to s-off

Hi guys, first time poster - I want to install the following custom rom...
http://forum.xda-developers.com/showthread.php?t=2442946
... and being new to android modding, do not want to brick it by doing something wrong.
I gather i need to set up superCID and then set to s-off - would anyone be able to point me in the right direction on how to do these correctly for a Telstra phone?
My phone is rooted with CWM, from whati gather (it says "ClockworkMod recovery" in recovery mode).
Thanks

jacen72 said:
Hi guys, first time poster - I want to install the following custom rom...
http://forum.xda-developers.com/showthread.php?t=2442946
... and being new to android modding, do not want to brick it by doing something wrong.
I gather i need to set up superCID and then set to s-off - would anyone be able to point me in the right direction on how to do these correctly for a Telstra phone?
My phone is rooted with CWM, from whati gather (it says "ClockworkMod recovery" in recovery mode).
Thanks
Click to expand...
Click to collapse
You might already have SuperCID, you can use a fastboot command to check. The command is:
Code:
fastboot oem readcid
If it comes back as anything other than 11111111 you can use this method to get SuperCID.
Once you have SuperCID you can use this method to get s-off.
Sent from my Evita

timmaaa said:
You might already have SuperCID, you can use a fastboot command to check. The command is:
Code:
fastboot oem readcid
If it comes back as anything other than 11111111 you can use this method to get SuperCID.
Once you have SuperCID you can use this method to get s-off.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, i will take a closer look soon. Is it true that for Telstra phones the CID needs to be 22222222, or is 11111111 okay as well?

jacen72 said:
Thanks, i will take a closer look soon. Is it true that for Telstra phones the CID needs to be 22222222, or is 11111111 okay as well?
Click to expand...
Click to collapse
The 22222222 CID only applies to at&t phones trying to unlock their bootloader via htcdev, this is because at&t stock CID (cws__001) plus 11111111 CID have been blocked at htcdev. For your purposes 11111111 will be fine.
Sent from my Evita

timmaaa said:
The 22222222 CID only applies to at&t phones trying to unlock their bootloader via htcdev, this is because at&t stock CID (cws__001) plus 11111111 CID have been blocked at htcdev. For your purposes 11111111 will be fine.
Sent from my Evita
Click to expand...
Click to collapse
Thanks for the info - i know i need to superCID as i checked last night and CID was TELST001 (from memory). Will use 11111111.

No problems, did you use the fastboot command the check your CID? I only ask because there are apps available which claim to display your CID but they show the original CID, not the current one.
Sent from my Evita

timmaaa said:
No problems, did you use the fastboot command the check your CID? I only ask because there are apps available which claim to display your CID but they show the original CID, not the current one.
Sent from my Evita
Click to expand...
Click to collapse
I tried so many things last night i couldn't tell you exactly what i did, haha! Will try your way and see what it says.
A quick question - in regard to the facepalm link, it says "Download patcher and unzip it in your working directory" - can this be any folder on my phone (eg: Downloads)? I'm also guessing the other file (OneX.zip) goes in the same directory?

No you place the extracted patcher files and the PJ8312000-OneX.zip into your fastboot folder on your pc.
You need to have adb/fastboot and HTC drivers installed on your pc to do the s-off process.
Sent from my Evita

jacen72 said:
I tried so many things last night i couldn't tell you exactly what i did, haha
Click to expand...
Click to collapse
You should keep better track of things you are doing or you will end like NASA on Apollo 1 and not knowing what went wrong.
To repair something you need to know what you did to break it.

Big thanks timmaaa, have upgraded successfully!
twistedddx, you're not wrong - i should have kept an eye on what i was doing. Luckily for me, all went well!
Thanks again.

Glad to see you got it all sorted mate.
Sent from my Evita

Hi guys, since updating Android, i seem to find my service connection (no service) is being lost fairly easily - is there something i need to do in regard to this, or is it just me?!
Cheers

Which ROM are you on?
Sent from my Evita

timmaaa said:
Which ROM are you on?
Sent from my Evita
Click to expand...
Click to collapse
the one from the following link:
http://forum.xda-developers.com/showthread.php?t=2442946

You either need to update your firmware to 2.15 or just flash the Beastmode kernel.
Sent from my Evita

timmaaa said:
You either need to update your firmware to 2.15 or just flash the Beastmode kernel.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, when you talk about beastmode, is the following link what you are referring to?
http://forum.xda-developers.com/showthread.php?t=1797251
Also, with firmware 2.15 - i would actually like to keep it as stock as possible, so perhaps the firmware upgrade would be the better option? I have found a link that looks like it goes to the correct download:
http://forum.xda-developers.com/showthread.php?p=45646878 - (see last post)
Would i be right in saying the instructions for updating the kernel would be the same as at the following link:
http://forum.xda-developers.com/showthread.php?t=2423735 - (OPTIONAL: Installing the Firmware)
Thanks again for your help.

The first link is incorrect, you can find the Beastmode kernel in our development section. The kernel you just install in recovery.
The last link you quoted is where you'll find the 2.15 firmware, and the install instructions see in the first post on that thread (it's a manual install using fastboot).
Sent from my Evita

timmaaa said:
The first link is incorrect, you can find the Beastmode kernel in our development section. The kernel you just install in recovery.
The last link you quoted is where you'll find the 2.15 firmware, and the install instructions see in the first post on that thread (it's a manual install using fastboot).
Sent from my Evita
Click to expand...
Click to collapse
Thanks - looks easy enough. Can i ask what why i would install Beastmode instead of the firmware upgrade? From what i gather, it is to overclock the CPU?

You can leave the Beastmode settings stock, it's just an easier and safer fix rather than upgrading firmware. You can OC if you wish to of course. There's always a small risk involved with anything that touches your hboot.
Sent from my Evita

timmaaa said:
You can leave the Beastmode settings stock, it's just an easier and safer fix rather than upgrading firmware. You can OC if you wish to of course. There's always a small risk involved with anything that touches your hboot.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, maybe i will install beastmode instead then if it will help fix my connection issues. Sorry, but would you be able to point in the direction of where it is in the development section, i cannot seem to find it.
I promise if this works you wont have to hear my noob questions anymore!!

[Q] Upgrading Through RUU Help Needed

Hello My Dear Learners & Teachers....:angel:
my question is my At&t HOX is on 4.0.3 ICS Wanted To Install JB i went to htc site and got the RUU Link
(RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial)
The Filename mentioned ... want to know is it correct RUU for my At&t HOX?
My Current Info is
Software Number "1.85.502.3" | Radio 0.17.32.09.12 | Hboot 1.09.0000

That is the right RUU for the AT&T version.
Is your phone stock or modded?

xoreg93 said:
Hello My Dear Learners & Teachers....:angel:
my question is my At&t HOX is on 4.0.3 ICS Wanted To Install JB i went to htc site and got the RUU Link
(RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial)
The Filename mentioned ... want to know is it correct RUU for my At&t HOX?
My Current Info is
Software Number "1.85.502.3" | Radio 0.17.32.09.12 | Hboot 1.09.0000
Click to expand...
Click to collapse
If you have Super CID, do not run the RUU. It will brick your phone.
If you're not sure, type the following command into your command line:
fastboot oem
readcid
redpoint73 said:
That is the right RUU for the AT&T version.
Is your phone stock or modded?
Click to expand...
Click to collapse
Sent from my HTC One XL using XDA Premium 4 mobile app

//JavaJ said:
If you have Super CID, do not run the RUU. It will brick your phone.
Click to expand...
Click to collapse
If the phone is s-on, yes that is right.

First of All Thanksss
yeahhhh its S-on
and please let me know why super cid will brick?? I thought super cid means any ruu will work..lol :silly:
and no mine is not super cid ... so I will upgrade it. :highfive:

SuperCID just means that at&t phones were able to unlock via htcdev because the at&t CID was blocked. SuperCID + s-on + jb RUU = brick. This is because a CID check that occurs halfway through the RUU update doesn't allow the RUU to finish, therefore ending up with a partially completed RUU, which means a bricked phone.
Sent from my Evita

xoreg93 said:
and please let me know why super cid will brick?? I thought super cid means any ruu will work..lol :silly:
Click to expand...
Click to collapse
What timmaaa mentioned is basically a bug. The RUU shoudn't run halfway like that, but for some reason on JB RUUs, it does (past RUUs were fine with SuperCID).
But also, what you said above is not true. SuperCID will not allow "any" RUU to work. It only bypasses CID check. Trying to run a RUU for an older hboot will fail version check. You need s-off to run "any" RUU.

thanksssss ALL Update Successful.....