Database Info

Returning to Stock few questions.

So I am returning to stock from this build:
ROM: CyanogenMod 9 RC1
FIRMWARE: 3.32.401.x & 3.32.401.10x
Radio:/ 11.22.3504.07_M
Hboot: 1.27.1100
And I have a few questions because reading the guides just didn't help me:
1. I can't understand completely the name of the RUU's: RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe
1.27.401.3 - is this HBOOT version?
10.42.9007.00P_10.11.9007.15 - This is radio but why does it have 2 values?
192183- What is this?
2.
If you have S Off, this doesn't matter, but you should always try to flash the oldest RUU, so that it is easier to S Off later, unless you don't intend to perform S Off again.
Click to expand...
Click to collapse
I am S Off and I want to return my phone to S-on for warranty purposes then S-Off again so I must flash the oldest RUU right? If it is this is the situation how to determine the oldest RUU by HBOOT version?
3. Firmwares? What about them does the RUU overwrites the firmware should I downgrade firmware before flashing older RUU and can it be done? Is there such thing as firmware and RUU compatibility? If there is which firmware corresponds to which RUU, the firmwares have version that are not mentioned anywhere else?
4. Which RUU's I can flash and which I can't? I mean what should I look for to be suitable? Should I install RUU that has the same HBOOT version as mine or I can install older like I am ICS and I want to install GB RUU so I can S-Off easier latter?
So I am a little confused about downgrading and picking suitable versions of everything.
I decided to try without matching anything just downloading the RUU with the oldest hboot and flash it. It's RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe and my device info is in the beggining of the thread. So in FASTBOOT i run .exe and I get
error: -5001. Please make sure you have finished any previous setup and closed other applications.
Click to expand...
Click to collapse
Is the problem with compatibility or something else?

Okay seems I've asked too much. Well I want to understand all those things but for now this is what I need to know:
Will flashing this RUU: RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed.exe
On this Phone:
ROM: CyanogenMod 9 RC1
FIRMWARE: 3.32.401.x & 3.32.401.10x
Radio: 11.22.3504.07_M
Hboot: 1.27.1100
Will be successful and can I S-off and Root again easy latter?

SsBloodY said:
So I am returning to stock from this build:
ROM: CyanogenMod 9 RC1
FIRMWARE: 3.32.401.x & 3.32.401.10x
Radio:/ 11.22.3504.07_M
Hboot: 1.27.1100
And I have a few questions because reading the guides just didn't help me:
1. I can't understand completely the name of the RUU's: RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe
1.27.401.3 - is this HBOOT version?
10.42.9007.00P_10.11.9007.15 - This is radio but why does it have 2 values?
192183- What is this?
2. I am S Off and I want to return my phone to S-on for warranty purposes then S-Off again so I must flash the oldest RUU right? If it is this is the situation how to determine the oldest RUU by HBOOT version?
3. Firmwares? What about them does the RUU overwrites the firmware should I downgrade firmware before flashing older RUU and can it be done? Is there such thing as firmware and RUU compatibility? If there is which firmware corresponds to which RUU, the firmwares have version that are not mentioned anywhere else?
4. Which RUU's I can flash and which I can't? I mean what should I look for to be suitable? Should I install RUU that has the same HBOOT version as mine or I can install older like I am ICS and I want to install GB RUU so I can S-Off easier latter?
So I am a little confused about downgrading and picking suitable versions of everything.
I decided to try without matching anything just downloading the RUU with the oldest hboot and flash it. It's RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe and my device info is in the beggining of the thread. So in FASTBOOT i run .exe and I get Is the problem with compatibility or something else?
Click to expand...
Click to collapse
SsBloodY said:
Okay seems I've asked too much. Well I want to understand all those things but for now this is what I need to know:
Will flashing this RUU: RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed.exe
On this Phone:
ROM: CyanogenMod 9 RC1
FIRMWARE: 3.32.401.x & 3.32.401.10x
Radio: 11.22.3504.07_M
Hboot: 1.27.1100
Will be successful and can I S-off and Root again easy latter?
Click to expand...
Click to collapse
1. RUU naming convention
RUU_Pyramid_<an extra LE in the name if XE>_HTC_<country/cariier>_<rom main version>_Radio_<radio version>_release_<release version>_signed.exe
dont bother about release version ..we dont need that
the only concerns are ..
country/carrier -> which determines the cid
rom main version ->explains whether youy are on GB or ICS (lesser the version ..older it is ...only between same country/carrier RUU's)
radio version -> tells the radio
2.oldest RUU ..ive explained earlier ..the main version should be least ..but this comparison is only valid if the country/carrier matches
eg:
in case of
RUU_pyramid_tmous_1.52.xx
and
RUU_pyramid_europe_1.27.xx (you cant say which one is oldest)
3.no firmware questions when we are talking about RUU (firmware arises when you talk about custom roms)
RUU has everything ...it wipes everything and converts it to stock (RUU cant touch the SOFF and CID though ..they can be changed only manually ..i.e. by we doing it manually by commands)
4.which RUU ..is you decide by CID ...
if you are supercid ..and dont know the original cid
you need to select the RUU based on your country and carrier
there is an excellent guide on RUU and it explains everything
here is the link to it ...do read it
(it helps you in finding right RUU too )
RUU RELEATED INFO AND FLASHING GUIDE
also remember by flashing RUU ..you wont lose SOFF ...unless you change it manually ..to know how to change it please refer the above guide
also i believe this answer ..answers your second post questions too

Thanks a lot! But I still got the problem with error I mentionted in the 1st post (error 5001) I tried with 1.27 and 1.28 HTC-Pyramid-Europe. What should I do is flashing through safe mod possible.
Sent from my HTC Sensation using xda app-developers app

SsBloodY said:
Thanks a lot! But I still got the problem with error I mentionted in the 1st post (error 5001) I tried with 1.27 and 1.28 HTC-Pyramid-Europe. What should I do is flashing through safe mod possible.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
im confused
did you mean you solved it ? or are you asking me how to bypass that error ?
anyways
you need to keep the phone connected to pc in bootloader/fastboot and then run the RUU.exe
Also ..if you did HTC-DEV unlock ..relock the bootloader (fastboot oem lock) and run the RUU.exe

I can't solve the problem. I connect it in bootloader/fastboot and try to run the RUU.exe. And I did revolutionary S-OFF.

Hey no idea that
error: -5001. Please make sure you have finished any previous setup and closed other applications.
is pretty annoying.

What is the CID currently on the phone ?
The RUU with xxx.401.xxxx IRC will require SuperCID (11111111) or a CID of HTC__001.
1.27... will end up installing HBOOT 1.17.0008 (just gone through the process on my replacement replacement phone.
As mentioned earlier you'll keep S-OFF and your existing CID after installing the RUU.
As far as the comms are concerned have you got the latest HTC drivers on the PC ?
---------------snip-------------
anyways
you need to keep the phone connected to pc in bootloader/fastboot and then run the RUU.exe
Also ..if you did HTC-DEV unlock ..relock the bootloader (fastboot oem lock) and run the RUU.exe
---------------snip-------------
I've recently run a few RUUs on my phone to get to a state where I could have a carrier backup, just in case (I forgot to get one immediately after S-OFF/custome recovery, doh). At no point did I re-lock the bootloader, I unlocked it (HBOOT 1.27.0000) and it's stayed unlocked the whole time, always worked perfectly. I also didn't have the phone in bootloader/fastboot mode, it was just on the home screen, again worked perfectly. I guess YMMV.

I am super CID.

gol_n_dal said:
I've recently run a few RUUs on my phone to get to a state where I could have a carrier backup, just in case (I forgot to get one immediately after S-OFF/custome recovery, doh). At no point did I re-lock the bootloader, I unlocked it (HBOOT 1.27.0000) and it's stayed unlocked the whole time, always worked perfectly. I also didn't have the phone in bootloader/fastboot mode, it was just on the home screen, again worked perfectly. I guess YMMV.
Click to expand...
Click to collapse
regarding RUU running normally ..you should have usb debugging enabled ..and need to have proper drivers too to recognize the device ..
running from fastboot no hassle there.. (most 155 errors can be prevented from running from fastboot)
couple of people were thrown error 99 when they ran RUU with unlocked bootloader ..so relock is a safer bet to prevent that error too

Firmware Update Q&A [extra noob friendly]

WARNING*WARNING*WARNING
do this at your own risk! This is for s4 only!!
It has been brought to my attention that there might be a mid (model id) conflict
With flashing this and me along with others are trying to narrow down the issue. Thanks to @real187 for bring this to my attention.
I'm
S-off
Cid 11111111
MID PJ4011000
And had no problems flashing this firmware but others with same setup have reported soft brick.
OK I think @mkinney88 may have pin pointed where the soft brick may be coming from. If you s-off using facepalm, flash the firmware.zip and get soft bricked try this.
1. Get back to s-on (warning read directions several times before doing you CAN hard brick your phone) ~ http://forum.xda-developers.com/showthread.php?p=38267667
2. Get s-off with moonshine ~ http://forum.xda-developers.com/showthread.php?p=42613403
First off this is mostly ment for the T-Mobile branded phones but ill try and help all please let me know when asking questions if you have a T-Mobile or HTC branded phone (it has it right on the front of phone ).
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111 (I had no problem flashing firmware with s-off and Cid 11111111 but others have reported problems so if you don't want to chance it write your Cid to T-MOB010)
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin

Downloads
FIRMWARE ZIP DOWNLOAD
https://drive.google.com/folderview?id=0B-BYnLh2sosKamRwaUJJS05oU3M&usp=sharing or http://db.tt/Wua8mDS2
Credit go's to mkinney88 for the firmware

Bricks
First off if you can get into bootloader then you don't have a hard brick.
If your phone is in the black screen of death there may be hope but we're still trying to figure that one out.
If your phone doesn't respond to any input from you (power, power+volume down) then congratulations you have a hard brick but don't through it in the junk drawer just yet, you can have it jtag repaired (they open phone plug into main board and flash everything)
Here's the link (you do have to pay for this)
http://forum.xda-developers.com/showthread.php?p=37136553

One more just in case

rc420head said:
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Click to expand...
Click to collapse
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though

vatsaman said:
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
Click to expand...
Click to collapse
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!

I put a note of this in op just now, thanks for the warning, I'm trying to figure out why some can do this Cid 11111111 and some can't.
-----------------------------------------
Friends don't let friends post without searching first!

rc420head said:
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
Click to expand...
Click to collapse
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.

vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
Something else is going on. I used facepalm, and Cid 11111111 to flash firmware twice now with no issues and started same as you hboot 1.14
-----------------------------------------
Friends don't let friends post without searching first!

thank you!

I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?

khan.orak said:
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
Click to expand...
Click to collapse
I'm not sure if I understand your question. So let me ask a few questions.
What hboot are you on?
What carrier are you using?
Are you wanting to try cm 10.1 and afraid for losing stock?
What is stock just HTC sense 4+ or is there carrier added stuff?

rc420head said:
I'm not sure if I understand your question. So let me ask a few questions.
Click to expand...
Click to collapse
ok I'll try to make it clearer.
What hboot are you on?
Click to expand...
Click to collapse
I'm on hboot 2.15.0000
What carrier are you using?
Click to expand...
Click to collapse
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Are you wanting to try cm 10.1 and afraid for losing stock?
Click to expand...
Click to collapse
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
What is stock just HTC sense 4+ or is there carrier added stuff?
Click to expand...
Click to collapse
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.

khan.orak said:
ok I'll try to make it clearer.
I'm on hboot 2.15.0000
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
Click to expand...
Click to collapse
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)

rc420head said:
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
Click to expand...
Click to collapse
Thanks for the reply, really much appreciated.
I already have rooted the device and custom recovery TWRP 2.5. Though I am considering to downgrade it to 2.3.30. Now I made a backup of stock ROM. (System + Boot Partition)
So is this the only way I can get to stock?
I read somewhere that the following method could be used too(?)
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?

khan.orak said:
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
Click to expand...
Click to collapse
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app

ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Big thanks! :good:

vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app

ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Yes this will also work (I was under the impression no ruu's were available)
khan.orak said:
Big thanks! :good:
Click to expand...
Click to collapse

forgiven90 said:
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Yeah disabling the fast dormancy solved all my problems. :good:

[Q] Revert back to stock

I am looking for a Stock T-Mobile Jelly Bean image that won't brick my phone. I tried searching for one, but I couldn't find anything or I found RUUs for outdated versions of HBoot. I am trying to revert back to stock, but I am sorta scared to do so with an outdated RUU. I have HBoot version 2.15 and Radio version 1.13.50.05.31. Thanks in advance.

Would this be the RUU I have to download? http://bugsylawson.com/files/file/1...531-10305008l-release-309489-signed-ics-2exe/
I would just prefer a nandroid backup of the stock image that I can just flash with CWM.
I downloaded the RUU, I just need to know if that is the correct one for my phone before I use it. I really don't want a bricked phone. I checked the MD5sum already and it matches, that is the only thing holding me back.
Sent from my One S using xda premium

I have ran that RUU with the same hboot and radio as you. Why do you think it would brick your phone? you haven't supercid and have locked your bootloader right?
(didn't download from that site though)
http://forum.xda-developers.com/showthread.php?t=2094414

Okay, thank you for the reassurance. I just am pretty paranoid about bricking my phone. I have been looking up how to use RUUs for the last day or so, I just couldn't find anything on how to select the right one. Thanks again.
I just checked out your link and I am downloading now. I do not have SuperCID and I will be looking my boot loader.
Sent from my One S using xda premium

OccupyDemonoid said:
Okay, thank you for the reassurance. I just am pretty paranoid about bricking my phone. I have been looking up how to use RUUs for the last day or so, I just couldn't find anything on how to select the right one. Thanks again.
I just checked out your link and I am downloading now. I do not have SuperCID and I will be looking my boot loader.
Sent from my One S using xda premium
Click to expand...
Click to collapse
If you are on TMOB US then it's for you. Furthermore, you can match thr CID of your phone to that in the RUU.exe --> Firmware.zip --> android-info.txt.
You'll have to extract firmware.zip from temporary files when you run RUU without connecting phone.
Sent from my Nexus 7 using Tapatalk HD

I ended up using that RUU that was linked earlier in this thread and everything went fine. I just don't have the stock recovery. I guess that isn't that much of a problem though.
Sent from my HTC VLE_U using xda premium

OccupyDemonoid said:
I ended up using that RUU that was linked earlier in this thread and everything went fine. I just don't have the stock recovery. I guess that isn't that much of a problem though.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
The RUU installs the Stock Recovery automatically. You don't have to do anything extra.
You can find stock recovery (if you want to keep it for any purpose) inside the RUU (extraction would require you to run the RUU and then extract the recovery from Temporary Files)
OR
you can find it in the forums.

Hmmm, that's strange. Oh well I guess. When I tried to go into the recovery it just showed a red exclamation mark with a phone under it. I don't really need a recovery right now. Thanks for letting me know where I can find it.
Sent from my HTC VLE_U using xda premium

OccupyDemonoid said:
Hmmm, that's strange. Oh well I guess. When I tried to go into the recovery it just showed a red exclamation mark with a phone under it. I don't really need a recovery right now. Thanks for letting me know where I can find it.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
I believe that is the stock recovery. The red exclamation mark is telling you that you don't have access to it. Perfectly normal.

tivofool said:
I have ran that RUU with the same hboot and radio as you. Why do you think it would brick your phone? you haven't supercid and have locked your bootloader right?
(didn't download from that site though)
http://forum.xda-developers.com/showthread.php?t=2094414
Click to expand...
Click to collapse
Can I also run this same RUU as quoted in this thread ?
I have the same radio but different hboot ...
SuperCID = HTC__001 <---- I got this right now, I will have to put in TMO CID before I run RUU, is that true?
VLE PVT SHIP S-ON RL
HBOOT-1.13.0000
RADIO-1-13.50.05.31
I would like to go back to Stock becuase after rooting and putting custom ROM (AOKP, I lost 4g, it was working before)

DroidLuvver said:
Can I also run this same RUU as quoted in this thread ?
I have the same radio but different hboot ...
SuperCID = HTC__001 <---- I got this right now, I will have to put in TMO CID before I run RUU, is that true?
VLE PVT SHIP S-ON RL
HBOOT-1.13.0000
RADIO-1-13.50.05.31
I would like to go back to Stock becuase after rooting and putting custom ROM (AOKP, I lost 4g, it was working before)
Click to expand...
Click to collapse
Yes, I think it will give you an error with that cid. Someone could correct me, but with s-off you can run whatever ruu you want.

tivofool said:
Yes, I think it will give you an error with that cid. Someone could correct me, but with s-off you can run whatever ruu you want.
Click to expand...
Click to collapse
I am planning on changing the CID to match what's in the firmware and then running this RUU but... what about my hboot.. it's different than what you guys have. Its 1.13

DroidLuvver said:
I am planning on changing the CID to match what's in the firmware and then running this RUU but... what about my hboot.. it's different than what you guys have. Its 1.13
Click to expand...
Click to collapse
It will install the newer hboot to 2.15

tivofool said:
It will install the newer hboot to 2.15
Click to expand...
Click to collapse
So I should be able to run the RUU with lower boot like mine and it will upgrade the boot to 2.15 -
Is it true that with 2.15 hboot, modifying the CID is not allowed ?
Any reason why I should stay with 1.13 HBOOT and not go to 2.15 Hboot? Meaning any disadvantages of upgrading to HBOOT 2.15 ?

Well, say you updated your phone via ota & your cid is European or something. And all of the ruus for that CID are lower hboots. If u are s-on and and needed to ruu you wouldn't be able to.
But there is a guide to run a ota.zip for those people, so it isn't hopeless.
So not too many disadvantages.
In fact I just installed the newest Rom and firmware today. So my hboot is 2.16.
And the gossip is that update will be officially put out by HTC in a few weeks.
Sent from my HTC One S using Tapatalk 2

Remember this.
if you want to go stock again in future (warranty purpose)
some providers have only provided an ota (only ruu with lower hboots) when upgrading to jb. So downgrading gets hard
It's not that easy to flash an ota as is a ruu.
If your s-off downgrading is no issue.
Verstuurd van mijn HTC One S met Tapatalk

[Q] Set Telstra HTC One XL to s-off

Hi guys, first time poster - I want to install the following custom rom...
http://forum.xda-developers.com/showthread.php?t=2442946
... and being new to android modding, do not want to brick it by doing something wrong.
I gather i need to set up superCID and then set to s-off - would anyone be able to point me in the right direction on how to do these correctly for a Telstra phone?
My phone is rooted with CWM, from whati gather (it says "ClockworkMod recovery" in recovery mode).
Thanks

jacen72 said:
Hi guys, first time poster - I want to install the following custom rom...
http://forum.xda-developers.com/showthread.php?t=2442946
... and being new to android modding, do not want to brick it by doing something wrong.
I gather i need to set up superCID and then set to s-off - would anyone be able to point me in the right direction on how to do these correctly for a Telstra phone?
My phone is rooted with CWM, from whati gather (it says "ClockworkMod recovery" in recovery mode).
Thanks
Click to expand...
Click to collapse
You might already have SuperCID, you can use a fastboot command to check. The command is:
Code:
fastboot oem readcid
If it comes back as anything other than 11111111 you can use this method to get SuperCID.
Once you have SuperCID you can use this method to get s-off.
Sent from my Evita

timmaaa said:
You might already have SuperCID, you can use a fastboot command to check. The command is:
Code:
fastboot oem readcid
If it comes back as anything other than 11111111 you can use this method to get SuperCID.
Once you have SuperCID you can use this method to get s-off.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, i will take a closer look soon. Is it true that for Telstra phones the CID needs to be 22222222, or is 11111111 okay as well?

jacen72 said:
Thanks, i will take a closer look soon. Is it true that for Telstra phones the CID needs to be 22222222, or is 11111111 okay as well?
Click to expand...
Click to collapse
The 22222222 CID only applies to at&t phones trying to unlock their bootloader via htcdev, this is because at&t stock CID (cws__001) plus 11111111 CID have been blocked at htcdev. For your purposes 11111111 will be fine.
Sent from my Evita

timmaaa said:
The 22222222 CID only applies to at&t phones trying to unlock their bootloader via htcdev, this is because at&t stock CID (cws__001) plus 11111111 CID have been blocked at htcdev. For your purposes 11111111 will be fine.
Sent from my Evita
Click to expand...
Click to collapse
Thanks for the info - i know i need to superCID as i checked last night and CID was TELST001 (from memory). Will use 11111111.

No problems, did you use the fastboot command the check your CID? I only ask because there are apps available which claim to display your CID but they show the original CID, not the current one.
Sent from my Evita

timmaaa said:
No problems, did you use the fastboot command the check your CID? I only ask because there are apps available which claim to display your CID but they show the original CID, not the current one.
Sent from my Evita
Click to expand...
Click to collapse
I tried so many things last night i couldn't tell you exactly what i did, haha! Will try your way and see what it says.
A quick question - in regard to the facepalm link, it says "Download patcher and unzip it in your working directory" - can this be any folder on my phone (eg: Downloads)? I'm also guessing the other file (OneX.zip) goes in the same directory?

No you place the extracted patcher files and the PJ8312000-OneX.zip into your fastboot folder on your pc.
You need to have adb/fastboot and HTC drivers installed on your pc to do the s-off process.
Sent from my Evita

jacen72 said:
I tried so many things last night i couldn't tell you exactly what i did, haha
Click to expand...
Click to collapse
You should keep better track of things you are doing or you will end like NASA on Apollo 1 and not knowing what went wrong.
To repair something you need to know what you did to break it.

Big thanks timmaaa, have upgraded successfully!
twistedddx, you're not wrong - i should have kept an eye on what i was doing. Luckily for me, all went well!
Thanks again.

Glad to see you got it all sorted mate.
Sent from my Evita

Hi guys, since updating Android, i seem to find my service connection (no service) is being lost fairly easily - is there something i need to do in regard to this, or is it just me?!
Cheers

Which ROM are you on?
Sent from my Evita

timmaaa said:
Which ROM are you on?
Sent from my Evita
Click to expand...
Click to collapse
the one from the following link:
http://forum.xda-developers.com/showthread.php?t=2442946

You either need to update your firmware to 2.15 or just flash the Beastmode kernel.
Sent from my Evita

timmaaa said:
You either need to update your firmware to 2.15 or just flash the Beastmode kernel.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, when you talk about beastmode, is the following link what you are referring to?
http://forum.xda-developers.com/showthread.php?t=1797251
Also, with firmware 2.15 - i would actually like to keep it as stock as possible, so perhaps the firmware upgrade would be the better option? I have found a link that looks like it goes to the correct download:
http://forum.xda-developers.com/showthread.php?p=45646878 - (see last post)
Would i be right in saying the instructions for updating the kernel would be the same as at the following link:
http://forum.xda-developers.com/showthread.php?t=2423735 - (OPTIONAL: Installing the Firmware)
Thanks again for your help.

The first link is incorrect, you can find the Beastmode kernel in our development section. The kernel you just install in recovery.
The last link you quoted is where you'll find the 2.15 firmware, and the install instructions see in the first post on that thread (it's a manual install using fastboot).
Sent from my Evita

timmaaa said:
The first link is incorrect, you can find the Beastmode kernel in our development section. The kernel you just install in recovery.
The last link you quoted is where you'll find the 2.15 firmware, and the install instructions see in the first post on that thread (it's a manual install using fastboot).
Sent from my Evita
Click to expand...
Click to collapse
Thanks - looks easy enough. Can i ask what why i would install Beastmode instead of the firmware upgrade? From what i gather, it is to overclock the CPU?

You can leave the Beastmode settings stock, it's just an easier and safer fix rather than upgrading firmware. You can OC if you wish to of course. There's always a small risk involved with anything that touches your hboot.
Sent from my Evita

timmaaa said:
You can leave the Beastmode settings stock, it's just an easier and safer fix rather than upgrading firmware. You can OC if you wish to of course. There's always a small risk involved with anything that touches your hboot.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, maybe i will install beastmode instead then if it will help fix my connection issues. Sorry, but would you be able to point in the direction of where it is in the development section, i cannot seem to find it.
I promise if this works you wont have to hear my noob questions anymore!!

[Q] Update to 4.4 ROM from 4.2 with old hboot

Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor. Currently service provider is Koodo - a division of Telus (in Canada).
CID: ROGER001
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!

arjundas86 said:
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor.
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
Click to expand...
Click to collapse
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON

LS.xD said:
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
Click to expand...
Click to collapse
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?

arjundas86 said:
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
Click to expand...
Click to collapse
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0

LS.xD said:
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
Click to expand...
Click to collapse
Thanks for the toolkit.
cid: ROGER001
Btw, what's the purpose of going SuperCID?
Also, I don't want to install lower hboot. I am on hboot 1.08 and I think I need to install hboot 2.15. Right?
I guess S-OFF isn't absolutely necessary, but would be nice to have. Would you recommend using the S-OFF command from the toolkit you linked?

I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
With superCID you can switch to other CIDs e.g. for unbranding your device Also it's needed for "Facepalm S-OFF" (Was the only working method for me)
Sent from my loved HTC One S using (most time buggy) Tapatalk

LS.xD said:
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
Sent from my loved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe​
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29​
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29​
I would appreciate any insights into what would be the applicable RUU?
Thanks.

arjundas86 said:
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe​
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29​
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29​
I would appreciate any insights into what would be the applicable RUU?
Thanks.
Click to expand...
Click to collapse
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.

LS.xD said:
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
Click to expand...
Click to collapse
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?

arjundas86 said:
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
Click to expand...
Click to collapse
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.

LS.xD said:
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
Click to expand...
Click to collapse
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?

arjundas86 said:
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
Click to expand...
Click to collapse
To run a RUU NOT MATCHING your stock CID you need S-OFF // SuperCID. You cant install TMobile RUU at first :/
I would act like this:
Run latest Rogers RUU --> READ FACEPALM GUIDE CAREFULLY. There is how to gain SuperCID and then S-OFF. Once done you can change CID to whatever you want and run a (unbranded) RUU with HBoot 2.15.
But that is just what i thought about it. I suggest to let someone else CONFIRM the way suggested by me first.

Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware

@Rapier
thank you for the provided help as usual
Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed

LS.xD said:
...Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
Click to expand...
Click to collapse
For you? NO. You're better than me
The story is like this. I bought the phone in 2012. At that time, the highest hboot was 1.14 I believe (don't remember exactly) and there was no S-Off method available (they appeared later). There was something else tho. The lower hboots (1.09 and lower) permitted to write in the kernel partition or radio partition like an S-Off device. HTC then covered this in the higher hboots. So even if there was no S-Off method, there was a downgrade method that was used to downgrade the hboot from whatever you had to 1.09 or below. I downgraded mine to 1.06...don't ask why I didn't choose 1.09, I thought that was the RUU I considered to be fine for me at that time.
Now being on hboot 1.06 I can do anything except I cannot flash firmwares directly. So I cannot flash a new hboot with red letters removed for example. But I don't care about this...I can flash radios or kernels or splash screens like any S-Off user. The procedure for getting latest firmware and S-Off seems a little bit risky and I've read about alot of issues or problems from people who failed or tried countless times to reach that. So I've asked myself why should I do that if I don't need it?
Then it came the rumor and there were some brick cases of devices that were having some Android 4.3 ROMs and were not on latest firmware (in the meantime 2.13 and 2.15 hboots arise and also the S-Off method). It proved to be not the firmware fault after all. But CM team has included a check in the updater script of the ROM ZIP, to validate if the hboot was 2.13 or 2.15...if not, the flash won't happen. It's a simple assert command present there at the beginning of the script that do the check. As CM team was the pioneer in having the newest Android version ROMs available, everybody based initially their ROMs/builds on CM...so the check in the script was automatically carried over to all the ROMs out there. And it's still here.
As I've tested and I could run fine those ROM's (by removing the check before flash), I noticed that this requirement does not apply to everyone. Some could run fine the ROMs even if they're not on the "latest" firmware.
So that's why I am on 1.06...cause I don't know why should I go through some risky procedures when I don't need to.

Rapier said:
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
Click to expand...
Click to collapse
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
Rapier said:
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
Click to expand...
Click to collapse
I don't get what you're saying. It is still worth getting S-OFF, or it is not?

arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+

LS.xD said:
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
Just IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
Click to expand...
Click to collapse
Yes, you're right. That's what I meant. I will delete the updater-script lines that Rapier mentioned before trying to install CM11.
If it doesn't work, at least I can restore to my backup, without risk of bricking.
Then I can try the hboot update and s-off if required.
Thanks.

arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​...
Click to expand...
Click to collapse
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't want
arjundas86 said:
...I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
It's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
BUT, if you're NOT going to upgrade your firmware and you'll be lucky to have the ROM working, you won't need to S-Off since your current hboot is lower than 1.09 and allows you to flash radios and kernels directly from recovery.
And at this point, as you said, it worth a try like you are now and only if it's not working like this you should upgrade and do S-Off. I guess is much easier and less risky to remove 4 lines from that script and flash the ROM to see if it's working, than to go through the firmware upgrade & S-Off procedures

Rapier said:
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't wantIt's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
Click to expand...
Click to collapse
Hey Rapier,
I'm having trouble doing getting the zip signed.
I tried the zip signer you had in your guide, as well as a bunch of other zip signing programs, but none of them seem to do the job. I keep getting Error: Status 7.
Not getting bootloops or anything like that, so I was able to restore to my backup. No harm done.