Introduction:
This project will focus on the development of kernel for HTC One Dual SIM (M7C). There is now a release for each variant: 802W (M7CDUG), 802D (M7CDWG) and 802T (M7CDTU).
The aim is to provide a stable kernel and complement it with wake features (S2W / DT2W / L2W), at least for now. Wake support is based on code developed by @flar2 for ElementalX kernel, so main credits to him.
Changelog (downloads available from the proper tab above):
Stable release - 802Xtreem-3.0 (10-05-2015):
Kernel updated to the latest source code from HTC - Android 5.0.x / Sense 6.0 (not(?) compatible anymore with Android 4.4.x / Sense 6.0 based ROMs)
Stable release - 802Xtreem-2.1 (15-11-2014):
Included support for 802T variant
Adjusted build options
Enabled kexec-hardboot for all variants
Stable release - 802Xtreem-2.0 (09-10-2014):
Included support for 802D variant
Kernel updated to the latest source code from HTC - Android 4.4.3 / Sense 6.0 (not compatible anymore with Android 4.4.2 / Sense 6.0 based ROMs)
Implemented kexec-hardboot (for multi ROM support)
Stable release - 802Xtreem-1.2 (27-09-2014):
Included NTFS support
Fixed exFAT support (stock module is now loaded and should not cause filesystem errors)
Stable release - 802Xtreem-1.1 (03-09-2014):
Included exFAT support
Added USB fast charge (optional)
Stable release - 802Xtreem-1.0 (01-09-2014):
Included init.d support
Disabled system write protection
HSIC wakelock fix
Added optimized AES and SHA1 routines
Added support for bit sliced AES using NEON instructions
Optimized -O3 Linaro GCC 4.8.1
Beta release (07-07-2014):
Added Wake Gestures support
Added BLN (Button Light Notification) feature
Early preview (07-07-2014):
Stock kernel 3.4.10
Initial traditional DT2W / S2W / L2W support
Install instructions:
The new stable version is a flashable .zip and should be installed via CWM / TWRP recovery.
Beta version and early preview were released as boot image only. Those have to be flashed via fastboot:
Code:
fastboot flash boot boot.img
GPL compliance:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel source code: 802Xtreem repo
Notes:
The inclusion of this kernel in your ROMs is NOT allowed.
Instead add a link to this project as a recommendation on your own thread.
Credits:
flar2 for wake gestures code
tbalden for blinking buttons mod code
HTC for finally releasing source code
XDA:DevDB Information
802Xtreem, Kernel for the HTC One
Contributors
bgcngm
Source Code: https://github.com/bgcngm/802Xtreem
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.1
Stable Release Date: 2014-11-15
Beta Release Date: 2014-07-07
Created 2014-07-07
Last Updated 2014-11-15
Notes
As you all have noticed, after flashing any custom boot and / or recovery image, a red warning during boot phase appears on phone screen. This was not a really big deal when splash logo only showed the HTC logo. But now it, after Sense 6.0 update, splash logo was updated and not only shows the same HTC logo but also "Powered by Android" logo at the bottom and the red warning is placed all over it. The trick to get rid of that is to flash a modified HBOOT, but one should take into account a very important premise: never turn S-ON without reverting to stock HBOOT, otherwise phone will be bricked!!!.
The attachment contains the most recent package containing a HBOOT flashable .zip.
HTC One Dual SIM (802W) RUU and OTA updates collection
Just a placeholder for the collection of RUU's and OTA updates, as it may be useful for some users.
Chinese version (China Unicom)
Compatible with MID PN0771000 and the following CID:
HTCCN703
RUU (Android 4.1.2):
PN07IMG_M7C_DUG_JB_50_HTCCN_CHS_CU_1.12.1402.1_Radio_1237.17.18.0423_release_318980.zip - 846.28 MB
OTA updates (Android 4.1.2):
OTA_M7C_DUG_JB_50_HTCCN_CHS_CU_1.12.1402.2-1.12.1402.1_release_321671.zip - 23.01 MB
RUU (Android 4.2.2):
PN07IMG_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.17.1402.2_Radio_1237.20.28.0614_release_324897.zip - 895.40 MB
PN07IMG_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.30.1402.1_Radio_1237.25.32.0717_release_332510.zip - 906.45 MB
PN07IMG_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.39.1402.1_Radio_1237.25.32.0717_release_338991.zip - 917.92 MB
OTA updates (Android 4.2.2):
OTA_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.17.1402.2-1.12.1402.2_release_325107.zip - 175.49 MB
OTA_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.25.1402.1-2.17.1402.2_release_328932.zip - 50.33 MB
OTA_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.30.1402.1-2.25.1402.1_release_332539.zip - 50.49 MB
OTA_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.36.1402.1-2.30.1402.1_release_337538.zip - 78.63 MB
OTA_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.39.1402.1-2.36.1402.1_release_339019.zip - 41.97 MB
OTA_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.43.1402.1_R-2.39.1402.1_release_347368.zip - 52.95 MB
RUU (Android 4.4.2):
PN07IMG_M7C_DUG_K44_SENSE55_MR_HTCCN_CHS_CU_4.21.1402.3_Radio_1237.28.34.0106_release_309439.zip - 1.12 GB
PN07IMG_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1402.3_Radio_1237.28.34.0106_release_373024_signed_2.zip - 1.10 GB
OTA updates (Android 4.4.2):
OTA_M7C_DUG_K44_SENSE55_MR_HTCCN_CHS_CU_4.21.1402.5-2.43.1402.1_R_release_3567809.zip - 753.79 MB
OTA_M7C_DUG_K44_SENSE55_MR_HTCCN_CHS_CU_4.21.1402.3-2.43.1402.1_R_release_351325.zip - 664.42 MB
OTA_M7C_DUG_K44_SENSE55_MR_HTCCN_CHS_CU_4.21.1402.5-4.21.1402.3_release_3567281.zip - 91.94 MB
OTA_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1402.3-4.21.1402.5_release_373025.zip - 383.96 MB
OTA updates (Android 4.4.3):
OTA_M7C_DUG_K443_SENSE60_MR_HTCCN_CHS_CU_6.11.1402.2-5.15.1402.3_release_388632.zip - 273.67 MB
European version
Compatible with MID PN0771000 and the following CID:
HTC__001
HTC__A07
HTC__A48
RUU (Android 4.2.2):
PN07IMG_M7C_DUG_JB_50_S1_HTC_Europe_2.19.401.1_Radio_1237.21.28.0627_release_326125.zip - 989.19 MB
OTA updates (Android 4.2.2):
OTA_M7C_DUG_JB_50_S1_HTC_Europe_2.41.401.1-2.19.401.1_release_3398289.zip - 131.61 MB
OTA updates (Android 4.4.2):
OTA_M7C_DUG_K44_SENSE55_MR_HTC_Europe_4.21.401.5-2.41.401.1_release_3540490.zip - 794.43 MB
OTA_M7C_DUG_K44_SENSE60_MR_HTC_Europe_5.17.401.6-4.21.401.5_release_378997.zip - 525.92 MB
RUU (Android 4.4.3):
PN07IMG_M7C_DUG_K443_SENSE60_MR_HTC_Europe_6.13.401.3_Radio_1237.28.35.0516_release_391892_signed.zip - 1.20 GB
OTA updates (Android 4.4.3):
OTA_M7C_DUG_K443_SENSE60_MR_HTC_Europe_6.13.401.3-5.17.401.6_release_391893.zip - 396.16 MB
OTA updates (Android 5.0.2):
OTA_M7C_DUG_L50_SENSE60_MR_HTC_Europe_7.17.401.5-6.13.401.3_release_425835.zip - 717.69 MB
Will there be L2M (Logo to menu) also?
In the current version that I'm testing, L2M was already supposed to be supported, but I can't get it to work. Don't know why.
On the other hand, wake gestures are working flawlessly and can be easily configured via Sense 6 Toolbox or Wake Gestures.
Thx, i can't test right now , im on vacantion. Keep do that great work.
Sent from my hTc One DualSim 802w
Cant test it as of this moment. I dont have an pc access.. Will report once i flashed it
Sent from mobile
Confirming all functions working on custom ROM. Great work, thanx.
Thanks for the feedback. So, the tests throughout the day went fine and a beta release was just uploaded. Refer to the first post to know what's new. Wake Gestures can be configured via Sense 6 Toolbox or Wake Gestures and override traditional sweep2wake or doubletap2wake.
bgcngm said:
That's correct. Stock modules are loaded as far as kernel version number remains the same. The problem I was having was that I was patching kernel to newer versions. If I want to do it in the future, wlan driver has to be included in the sources, so that a new module is also compiled.
Click to expand...
Click to collapse
I know that. you can also hex those ko's vermagic number to achieve the same thing. The problem is that I compiled with the same kernel version as the one in chinese 802w, and I still can't get wlan.ko loaded.
dmesg shows this:
disagrees about version of symbol module_layout
I think it's related to crc checking, but this commit just doesn't help:
https://github.com/flar2/ElementalX-evita-8.0/commit/db72716cfdf7fcee9dc5236996d14e52c8cf8bf9
Well, as I don't know what you are trying to accomplish I can't help you.
bgcngm said:
Well, as I don't know what you are trying to accomplish I can't help you.
Click to expand...
Click to collapse
you may encounter the same if you add more patches, etc, as long as CRC numbers are different. so the only way to solve this permanently is to find out how to bypass CRC check for prima_wlan.ko
jerrylzy said:
you may encounter the same if you add more patches, etc, as long as CRC numbers are different. so the only way to solve this permanently is to find out how to bypass CRC check for prima_wlan.ko
Click to expand...
Click to collapse
If you need, prima_wlan drivers source code can be found here. Let me know if you manage to include it in the kernel sources. So far, I haven't been able to get it done.
First off all - thanx for your work.
Do you plan to add some governor (lulzactive, intellidemand,smartass2...) and I/O Scheduler (fipos, sio ...) in future?
First off - thanks for getting into this, frankly these features are the only stuff worth rooting my 802w...
Will there eventually be these:
Disabling volume buttons unless media is playing?
wake/sleep via VOL- button?
double tap home for menu even on the home? as the prism menu in Viper ROM?
long press home for slashlight, again as the Viper ROM has?
Thanks a million!
roxalex said:
First off all - thanx for your work.
Do you plan to add some governor (lulzactive, intellidemand,smartass2...) and I/O Scheduler (fipos, sio ...) in future?
Click to expand...
Click to collapse
Yes, it is planned for the future.
Dr.Romca said:
First off - thanks for getting into this, frankly these features are the only stuff worth rooting my 802w...
Will there eventually be these:
Disabling volume buttons unless media is playing?
wake/sleep via VOL- button?
double tap home for menu even on the home? as the prism menu in Viper ROM?
long press home for slashlight, again as the Viper ROM has?
Thanks a million!
Click to expand...
Click to collapse
Long press logo (not home) for flashlight is already possible with Wake Gestures. Install Sense 6 Toolbox and you'll be able to assign many actions to double tap, swipe (down, up, right and left) and logo long press.
Also, wake up via volume buttons could be enabled without any kernel change using Sense 6 Toolbox. As for the other features, I'll see what can done.
bgcngm
can you make it for 802d pls?
Did you try to flash boot.img on your 802D? I can't actually test because I have 802W. I was curious to know if kernel works on all variants (W/D/T).
yours boot.img from download section to my 802d?
no... did not try.. i can try! - but kernels really identical for all dualsim? - I do not get a brick? )
You won't get a full brick. Phone may not boot and then, in such case, you just need to revert to 802D stock boot.img. Do you have stock boot.img for your device? Please post here so that I can have a look at ramdisk contents to see if it differs in any way to the one from 802W.
Related
The fastest/stable MIUI V5 3.5.10 Jelly Bean v6.2
For donations, PayPal couldn't receive donations to India, use "Send payment" service from PayPal
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hboot : Stock HBoot
A2SD Support (Use Android terminal emulator to enable it, y/n/y)
Note: Please do not mirror the download links.
Download link
Version 6.2 Stock HBoot
Download with GApps
Version 6.1:Stock HBoot
Download with GApps
Version 6.0:
300MB System HBoot download here
Download with GApps - Multi-lang
Version 5.0:
300MB System HBoot download here
Download with GApps
Older Versions MIUI V4:
Version 4.9:
Download with GApps
Tethering to work
Download here
Thanks to:
Evervolv (https://github.com/Evervolv)
MIUIAndroid forum devs (https://github.com/miuiandroid)
Previous version links:
Version 4.8:
Download with GApps included
Version 4.7:
Download with GApps included
Version 4.6:
Download with GApps included
Version 4.5:
Download with GApps included
Version 4.4 A2SD: User terminal emualtor provided
Download here
Version 4.3 A2SD: User terminal emualtor provided
Download here
Version 4.1 A2SD: Use terminal emulator provided
Download here
Version 4.0 A2SD: Use terminal emulator provided
Download here
Version 3.1 A2SD: Use terminal emulator provided
Download here
Version 3.1 AD2SDX: No need to run any script, included default.
Download here For fast SD cards only (expect some issues)
Version 2.7_Latest
Download here
Click to expand...
Click to collapse
Soft-Nav functionality:
To enable flash this zip
To disable flash this zip
Click to expand...
Click to collapse
Change logs:
Version 4.5:
MIUI Updated to 3.1.11 (11-Jan-2013)
Much smoother
Google talk voice call fix
Included required Gapps
System size 214 ( Use HBoot of sytem 225)
Soft-Nav modded to reduce the size
Complete changelog -> check here
Version 4.4:
1. Optimisation to significantly improve the SMS session page display and sliding fluency
2. Optimisation in anti-disturb: When importing phone numbers from call log to blacklist, the numbers you dialed won’t be imported.
[Phone]
Optimisation for number attribution database
Fix after turning off flight mode on CDMA phones, call interface displays unusually when using the emergency call
[Messaging]
Optimisation to significantly enhance the SMS session page display and sliding fluency
Fix when the screen is locked, the network SMS can’t be sent and received in time
[Settings]
Optimised LED color settings, remove orange colour (MI-2)
[DND / Anti-disturb]
Optimisation When importing phone numbers from call log to blacklist, the numbers you dialed won’t be imported.
[Other]
Fix in some cases Xiaomi account interface display error
No ROM Update next week
New year’s is coming and Xiaomi are having a 5-day holiday from 30th Dec 2012 to 3rd Jan 2013. So there will be no update next Friday.
Click to expand...
Click to collapse
Version 4.3:
MIUI Updated to latest 2.12.21 build
2.12.21 Changelog -> http://miuiandroid.com/community/thr...angelog.19077/
Fixed Data Connection problem
Fixed Network Signal Strength display
Version 4.2:
MIUI Updated to latest 2.12.14
Changelog -> http://miuiandroid.com/community/thr...angelog.19007/
http://miuiandroid.com/community/thr...angelog.18950/
Note: Wipe all except SD card and Flash the ROM
Run A2SD script (Y|N|Y) from Terminal Emulator provided
Accept any permissions request if you get
Flash GApps from recovery
Turn off GPS (if not used)
Use Volume+/- whenever you have sound issues.
Check your APN settings to make sure it is correctly selected.
After installing/updating required apps reboot and leave the ROM to settle for 10min.
Version 4.1
MIUI updated to 2.11.30 (MIUI.us)
Lock screen lag reduced.
Fan-Nav broken
Version 4.0
MIUI updated to 2.11.23 (MIUI.us)
MIUI.us Toolbox with lot of setting for ROM (scroll left to see more tabs)
MIUI Wheather
4.2 Android keyboard
4 Way Reboot Menu
Check features from MIUI.us
Toolbox feature like: Status Bar settings, Colors, Launcher, CPU Settings, ADB WiFi, Battery Calibration, Fan-Nav Options (Soft-Nav cool feature)
Note:
Wipe all except SD card
Flash ROM
Enable ROOT Permissions in LBE SEC
Download SuperSU (Play Store), give it ROOT Permission in LBE SEC (Enable All) , then update the SU binary via SuperSU
Download Android Terminal Emulator, execute A2SD script (Y|N|Y)
Version 3.1
For AD2SDX, after you flash the ROM set root permissions and reboot.
MIUI 2.11.2 updated to latest build 2.11.16 -> Change log http://miuiandroid.com/community/thr...angelog.18773/
Fixed HTML Browser advanced settings
Themes issue completely fixed
Brightness levels adjusted
WiFi Tether tweaks
Improved Speed/Smoothness
Added Terminal Emulator to run A2SD
GApps moved out
Note:
Before flashing the latest update, rename/delete MIUI folder from SD card.
Do full wipe except SD card
Flash ROM and run A2SD script as soon as boots up.
Flash GApps
Version 3.0 Download
MIUI updated from 2.10.12 to 2.11.2 (http://www.youtube.com/watch?v=lgsqshpqszQ&feature=player_embedded)
Full Change log -> http://miuiandroid.com/community/threads/miui-rom-2-11-2-changelog.18664/
Delete MIUI folder from SD card before installing ROM.
Since Themes are broken in Mix mode only (Part of the MIUI build).
Solution: Download new themes and while applying un-select what is not needed, that way you can achieve Mix mode.
Version 2.7 Download
Updated to JB 4.1.2
Speed is increased
No more flickering
Updated Evervolv to 3.1.0p1
Latest Gmail 4.2 included
Version 2.6
Updated MIUI 2.10.12 fixes
More responsive
3 way reboot menu
Updated p9 to p11
Video recording (choppiness)
etc...
Version 2.5
Updated MIUI from 2.9.29 to latest 2.10.12
Version 2.4
Updated MIUI from 2.8.17 to latest 2.9.29
USB Mass storage fixed
USB Tether fixed
More fixes from 2.9.29
A2SD support
Version 2.3
Nikez p8 changed to p9
Soft Vsync should boost the smoothness
A2SD support (different download links provided)
AD2SDX support
Version 2.2
nikez p7 changed to p8
Kernel - wifi, binder, tweaks from faux123 for better performance.
A2DP Audio over Bluetooth
A2SD (install Android Terminal and activate)
Lot more changes...
Version 2.1
Added back ad2sdx support (installs by default)
Version 2.0
Fixed Mic
Fixed Audio Player
Fixed Rotation
Fixed Auto Brigthness
Improved smoothness
Improved HWA
Added Apps2SD script
Removed AD2SDX (default)
Version 1.0
Initial version with lot of stuff working
Working list:
Data
WiFi
Bluetooth
Rotation
Mic
Sound
USB Mass Storage
GPS
A2SD, AD2SDX Scripts
Trackball wake
HWA
Camera
Video recording (Choppiness)
Sensors
Themes
and more....
Click to expand...
Click to collapse
Themes
miSense
http://forum.xda-developers.com/showthread.php?t=1434212
The First tHeme 1.0
http://forum.xda-developers.com/showthread.php?t=1622394
Black & Blue
http://forum.xda-developers.com/showthread.php?t=1880401
Dark White
http://forum.xda-developers.com/showthread.php?t=1764876
Suave HD
http://forum.xda-developers.com/showthread.php?t=1330577
Dark Blue
http://forum.xda-developers.com/showthread.php?t=1748303
Dark Knight Returns
http://forum.xda-developers.com/showthread.php?t=1655211
These Links are provided only to help you and I in no way guarantee that these themes are 100% compatible with MIUI 4.1 unless specified hence neither expect any help related to theme nor post it in this thread thank you for co-operation.
MIUI V5 Screenshots
Well done,support you
Sent from my HTC Desire using xda premium
You can atleast post the zip file.
How else are we supposed to download and evaluate ?
Nikez permission is no big deal, he will be OK with his work being appreciated.
Bravo!!! willing to test it~~~
Is Desire CDMA supported？
thank you, was waiting for this
Come on, Download!
Uploading the ROM.........
Edit: Done...
Multiupload.com , at once uploads to multiple filesharing websites so IMO it's best + they also host a direct link.
Thanks Downloading now.
Hey vijendrahs!
Thanks for your contribution to the comunity (us !
Having little trouble while instalking via 4ext recovery.
(errors while creating some symlinks - Status 7 - Instalation aborted)
Could that be a problem of a wrong HBoot? (using CM7r2)
Greetings from Berlin
Ralf
2good4you said:
Hey vijendrahs!
Thanks for your contribution to the comunity (us !
Having little trouble while instalking via 4ext recovery.
(errors while creating some symlinks - Status 7 - Instalation aborted)
Could that be a problem of a wrong HBoot? (using CM7r2)
Greetings from Berlin
Ralf
Click to expand...
Click to collapse
Use Stock hboot for now.
Sent from my HTC Desire using xda premium
vijendrahs said:
Uploading the ROM.........
Edit: Done...
Any fast file hosting sites please let me know I will re-upload it.
Click to expand...
Click to collapse
Fileswap.com
I also have a bitcasa account but I've never tried to use it for sharing, you may try.
http://ks368561.kimsufi.com/MIUI_JB_signed_082412_v1.0.zip
I can host any future updates if you require too, just message me and we can organize how to get in touch with one another. I love miui and will support as much as you need.
There are two download links available now... So no need to worry
vijendrahs said:
Use Stock hboot for now.
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
Thanks for the fast reply! Installation went fine with stock hboot
thanks,vijendrahs.rom is really good so far.
Hi.
Is this ROM multilang ? Does it include french translation ?
Is this thing stable enough for daily use? Btw thanks
GwT is an experimental AOSP build for the N73G and N7LTE Nexus tablets for those wanting to stay as close to the intended Google Experience as possible. SMS and MMS are fully functional as is tethering. This ROM is slim with no bloat or non experience apps loaded and should serve well as a daily driver or as a base ROM for theming / framework hacks when the modder doesn't want to go through the trouble to create their own full build.
As with all things XDA, proceed at your own RISK.
FEATURES / HIGHLIGHTS
Pure AOSP (built from source) 5.1..1 [aosp_tilapia-user LMY48G]
Full Bluetooth LE (4.0) support
Reboot and Reboot Recovery options added to shutdown menu
Bundled with Launcher3 (survives GAPPs install)
Native dialer is exposed, but GSM voice capability still not possible
Orientation Sensor supported Dialer (now built into Lollipop)
Tethering & Hotspot is enabled
Full APN list
Full SMS and MMS Send & Receive
APN Settings Editor Preference no longer a dialog (now built into Lollipop)
Phone Settings (and its children) no longer dialogs (now built into Lollipop)
Rock Solid ROM - As stable as stock
No SimpleSmsReceiver
Sun Beam Live Wallpaper included
Updated boot animation
Optionally bundled with carcosa kernel (no xmm_baseband_wakelock)
PIE check disabled for pre-JB native apps
What's Broke:
GSM Voice Communication (SIP works fine)
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install Instructions (assumes already unlocked):
It is highly recommended that you start with a full wipe from a known good installation of the N73G stock binaries.
GwT RC1 (and older releases) requires a base install of JOP40D
GwT RC2 and RC3 require a base install of JDQ39
GwT RC4 and RC5 require a base install of JWR66V
GwT RC6 requires a base install of JWR66Y
GwT KRT16O requires a base install of KRT16O
GwT LRX22G requires a base install of KTU84P
GwT LMY48G requires a base install of LMY47V
Since RC1 I have converted to a CWM/TWRP Recovery based install. Download the GwT zip file and place it in the root of your sdcard directory. Boot into CWM or TWRP recovery, select the GwT zip file and allow it to install. Be sure to use the LATEST version of TWRP or CWM.
Once the install is complete if unsure of next steps or problems occur perform a Factory Reset of your N73G.
Reboot and allow GwT to fully boot.
Optionally, install the recommended Google Apps package referenced below.
These instructions are reiterated (with a little more detail) here.
ROM DOWNLOADS
GwT LMY48G - XDA Direct - ACTIVE
GwT + carcosa Kernel Synman_GwT_carcosa-a35-tilapia-LMY48G-user.zip
GwT LMY48G - AFH Mirror - ACTIVE
GwT + carcosa Kernel Synman_GwT_carcosa-a35-tilapia-LMY48G-user.zip
GwT LRX22G - ACTIVE
GwT + carcosa Kernel Synman_GwT_carcosa-a33-tilapia-LRX22G-user.zip
GwT + AOSP Grouper Kernel Synman_GwT-tilapia-LRX22G-user.zip
GwT KRT16O - ACTIVE
XDA Direct Link Synman_GwT-tilapia-KRT16O.zip
RC6 (JWR66Y) - ACTIVE
XDA Direct Link Synman_GwT-RC6.zip
AndroidFileHost Synman_GwT-RC6.zip
RC6 Google Wallet Fix Synman_GwT-RC6-Wallet_Fix.zip
RC5 (JSS15J) - ACTIVE
XDA Direct Link [coming soon]
MIRROR (Google Docs) Synman_GwT-RC5.zip
RC4 (JWR66V) - ACTIVE
XDA Direct Link Synman_GwT-RC4.zip
MIRROR (Google Docs) Synman_GwT-RC4.zip
RC3 - (OOBSOLETE)
Synman_GwT_RC3.zip
RC2 (OBSOLETE)
Synman_GwT_RC2.zip
RC1 (OBSOLETE)
Synman_GwT_RC1.zip
V3 (OBSOLETE)
Synman_GwT_v3.zip
V2 (OBSOLETE)
MIRROR: Synman_GwT_v2.zip - md5: c1c193ca199e9ca9d4cca065bd786d4e - size: 162MB
V1 (OBSOLETE)
MIRROR: [ROM] [EXPERIMENTAL] [AOSP] Grouper for Tilapia (Synman) md5: a5f6f7fbe1b55a2b7caf87c398a488d0
GAPPs DOWNLOADS
CM12 GOOGLE APPS (Lollipop)
PA-GOOGLE APPS (KitKat)
ROOT DOWNLOADS
CF-AUTO-ROOT (Lollipop) (http://forum.xda-developers.com/showthread.php?t=1980683)
CF-Auto-Root-grouper-nakasi-nexus7.zip
Root / SuperSU (http://forum.xda-developers.com/showthread.php?t=1538053)
SuperSU 1.51
Release Notes
GwT LRX22G - 1/2/2015
Need to test BT to determine need to Forward port BT phantom dial bug fix
If you're unhappy with the Experience Launcher, AOSP Launcher3 will survive a GAPPs install if you want to revert to it
Advanced Power Menu (Reboot / Reboot Recovery)
GwT KRT16O - 11/18/2013
Forward ported BT phantom dial bug fix
If you're unhappy with the Experience Launcher, AOSP Launcher2 will survive a GAPPs install if you want to revert to it
Dual Pane Preferences, including System Preferences
Advanced Power Menu (Reboot / Reboot Recovery)
RC6 - 8/25/2013
Forward ported all prior changes (JWR66Y)
Added CRT screen off animation
Corrected a long standing phantom outbound call on BT headset connect issue
Built as full_tilapia-user
RC5 - 8/15/2013
Forward ported all prior changes (JSS15J)
Adjusted call capabilities (hoping to fix phantom BT outgoing call on headset connect)
Built as full_tilapia-user
RC4 - 8/12/2013
Forward ported all prior changes (JWR66V)
Added Sun Beam Live Wallpaper
Updated boot animation
Built as full_tilapia-user
RC3 - 3/10/2013
Added Global API setting TABLET_UI_MODE
Added Reboot to Shutdown dialog
Added Reboot Recovery to Shutdown dialog
Added Nova Launcher (Nova Launcher @ XDA) to /system/app
Rebuilt with Email app (missed from app list in RC2)
RC2 - 3/6/2013
All prior optimizations ported to 4.2.2
RC1 - 12/15/2012
APN Settings Editor Preference no longer a dialog (exposed actions)
Phone Settings (and its children) no longer dialogs (fixes SIP Providers Editor)
Google TTS SMS message playback on receipt (Selectable in Messaging Options)
Orientation Sensor supported Dialer
V3 - 12/9/2012
Fixed Location Services
Added PRODUCT_MANUFACTURER to build.prop
Removed (broken) Voice Dialer
Built with AOSP 4.2.1 Tilapia Device profile (true tilapia)
V2 - 12/8/2012
Added Camera
Fixed Orientation Sensors
Added AOSP NotePad
Added Tethering & SoftAP
Added SuperSU - Please buy SuperSU Pro
Added /system/bin/mountrw.sh for ease of rw mounting
V1 - 12/7/2012
Built from grouper 4.2.1 source branch
Full Telephony
Included MMS
Android full APN list
GwT Source Repository
https://github.com/synman/synman_aosp_tilapia
XDA:DevDB Information
Synman's Grouper with Tilapia (GwT) ROM, ROM for the Nexus 7
Contributors
Synman
Source Code: https://github.com/synman/synman_aosp_tilapia
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: JWR66V / JSS15J / JWR66Y / KRT16O / LRX22G / LMY48G
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: LMY48G
Stable Release Date: 2013-08-25
Created 2013-08-11
Last Updated 2015-07-06
Synman said:
Download here: http://www.shellware.com/projects/n73g/Synman_v1_Experimental.zip
I'm looking for a mirror if anyone can offer one up.
Click to expand...
Click to collapse
I can do for you without problem
Good stuff, I'm looking forward to receive my N7 for try it :good:
MIRROR LINK
[ROM] [EXPERIMENTAL] [AOSP] Grouper for Tilapia (Synman) md5: a5f6f7fbe1b55a2b7caf87c398a488d0
Added in the index
Finishing up some final testing and I'll have a stable version out. This last repack is looking good.
It's upload
MIRROR LINK
Synman_GwT_v2.zip - md5: c1c193ca199e9ca9d4cca065bd786d4e - size: 162MB
Swifted by Philos One X using xda premium somewhere between sky and earth
thanks again, guess I should check out that mirror myself as my link eats away my origin bandwidth.
Also, I have what is likely to be my final release candidate ready for release. Network Location Services is fixed and I converted over to the tilapia device tree. I'll be uploading it in a little bit and will then be able to focus fully on (hopefully) getting a radio hack implemented.
Will likely not fix Camera Panorama considering that LegacyCamera (it's the camera I'm including) is more functional than any of the others out there currently.
First post cleaned up considerably and V3 added. androidfilehost was really quick to approve an account for me. No more origin leeches
Synman said:
First post cleaned up considerably and V3 added. androidfilehost was really quick to approve an account for me. No more origin leeches
Click to expand...
Click to collapse
Good stuff. I'm looking forward to receive my 3 G 7 to test your rom
I'll go crazy to wait so long :silly::cyclops:
yeah, great! I'm gonna flash this as soon as my Nexus7 arrives
AOSP NotePad included
Click to expand...
Click to collapse
can you explain that? there is no native android notes app, is there? maybe you have some screenshots or a link?
punshkin said:
yeah, great! I'm gonna flash this as soon as my Nexus7 arrives
can you explain that? there is no native android notes app, is there? maybe you have some screenshots or a link?
Click to expand...
Click to collapse
Here ya go. Simple yet effective... Right from the AOSP source. There are two other variations but they make this one look polished.
Sent from my Nexus 7 3G using Tapatalk 2
Thank you for your great job.
Can we make voice calls with it?
Sent from my Nexus 7 using xda premium
hilaldroid said:
Can we make voice calls with it?
Click to expand...
Click to collapse
not yet... :crying:
This ROM is GSM ready. All it needs is a voice capable radio firmware
Sent from my Galaxy Nexus using Tapatalk 2
Synman said:
...
Install Instructions (assumes already unlocked):
Download and extract files. You should have system.img and userdata.img files.
Boot into boot loader - Power and Volume down at Google logo
Code:
/> fastboot -w flash system system.img
If you do not know how to unlock the Nexus 7 boot loader and/or you do not have the Android SDK installed, please follow the directions here ([GUIDE] Flashing a Factory Image with fastboot / return to stock) and stop after step #3 in the "Flashing the Factory Image" section. You can also skip the steps for downloading the stock Nexus image.
...
Click to expand...
Click to collapse
I just flash this ROM and apparently completed successfully, but when I send the command "fastboot reboot" the tablet fails to boot, it freezes on the Google logo ...
Any suggestions?
Thanks and best regards,
Do a full factory flash then try again.
Sent from my Galaxy Nexus using Tapatalk 2
Synman said:
Do a full factory flash then try again.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Indeed, from a stock rom clean, worked fine ... Is starting ...
Before I was doing from the MoDaCo Custom Rom JR3.
I'll try it and then posting my impressions ...
Thanks,
Sounds good. Try the referenced GAPPS pack too.
Sent from my Galaxy Nexus using Tapatalk 2
Maybe I'm just lazy, but will this be packed into the usual zip format to be flashed via recovery?
At some point you had fastboot configured and running
I'm sure I'll publish an update.zip at some point too... Very likely to be necessary if a radio is ever included.
Sent from my Nexus 7 3G using Tapatalk 2
Hi
What do you mean by "Full Telephony" in the title ?
GSM Voicecalls are now working ?
Synman said:
At some point you had fastboot configured and running
I'm sure I'll publish an update.zip at some point too... Very likely to be necessary if a radio is ever included.
Sent from my Nexus 7 3G using Tapatalk 2
Click to expand...
Click to collapse
I'm just thinking of those emergency situations where I need to flash without a PC.....had to do that several times on my GN, not sure whether I'll have to go through the same for N7.
I am proud to present you with an incredible smooth and feature rich AOSP based ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
CPA-Poke
TheBr0ken
Cdub50
FEATURES:
UBER 4.9 GCC Toolchain
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimizations
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo
Ram Bar
New CM Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Gamma Configuration support
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
LiquidSmooth v3.2 Full list of features
CHANGELOG:
NEW IN RELEASE 8:
Add back full language support.
Lower the default max. cpu freq to 998400 Hz.
Torch: Removed brightest option from settings; Torch will now stay on after screen shut down!
NEW IN RELEASE 7:
This build includes the official Android Security Updates from 1st June 2015
Compiled the ROM with O3 flag
Compiled the kernel with UBER toolchain 4.9.4 for increased speed and battery life (credits Cl3Kener); compiled the rom with AOSP toolchain 4.8
Update kernel (July security bulletin)
Replace KernelTweaker (FC'ing) with KernelAdiutor
Removed DashClock widget (cLock is much nicer)
NEW IN RELEASE 6:
This build includes the official Android Security Updates from 1st Nov 2015 (you can now view the information about the patch level under Settings > About Phone > Android security patch level)
Compiled the ROM with O3 flag
Compiled the kernel with UBER toolchain 4.9.4 for increased speed and battery life (credits Cl3Kener)
Patched the previously missed out security holes in kernel base as mentioned by @walter79
If you want to have kernel 3.0.16 (experimental) use this flashable zip
Updated NovaLauncher to 4.1.0
Removed DashClock widget (cLock is much nicer)
Added signature spoofing support (read more about this)
Fixed an issue in the hardware keys configuration (credits @sverfaillie)
Slim GApps: fixed a problem (three no longer required apks were still remaining under /system/apps after GApps installation) to gain more space in the ROM's system partition
NEW IN RELEASE 5:
Added a few more patches against vulnerabilities, e.g.: CVE-2015-1528, CVE-2013-6282 (kernel patch).
Big thanks to @walter79 for making me aware of their existence!
NEW IN RELEASE 4:
Added the previously missed out patch (CVE-2015-6602) to reach full Stagefright 2.0 security level & Android Security Updates from Nov 2015)
NEW IN RELEASE 3:
Patched to the highest security level for Kitkat (incl. Stagefright 2.0 & Android Security Updates from Nov 2015)
Set CM cLock as default lockscreen widget
Added a patch to prevent wakelocks caused by Google Play Services 7.x SystemUpdateService (credits CM)
Use per default SMARTASSH3 (allows a better speed/battery-saving ratio)
NEW IN RELEASE 2:
ART
Liquid Launcher
Keyguard: use overlay to disable Menu Key In Lock Screen
Fix 'long press home key' to bring up the recent apps
Slim down rom by removing Chinese font
Update animation scale defaults with the optimal settings for htc bravo (0.5x)
Frameworks/base: Add setCurrentFunctions to Legacy USB DM
Allow forcing HighEndGfx mode
New CM Theme Engine
NEW IN RELEASE 1.5:
Update of Inspire Launcher (12.2.0): Launcher settings is more stable now
Fixed Hardware keys
A2SD is working now (fixed an issue with mounting sd-ext)
NOT WORKING:
MMS (present in all 4.x ROMs; Just use Textra SMS instead)
Video recording (present in all 4.x ROMs)
Screen recording (not supported by kernel)
OpenVPN (kernel issue: cannot acquire tun interface socket)
SELinux (disabled by intention)
Torch: Brightest setting and stay on after screen shut down (Torch improved)
Please let me know if you find bugs -- if possible with logcat. Thanks! :good:
DOWNLOADS:
Download LiquidSmooth Kitkat v3.2 2016-07-22
Slim Gapps for LiquidSmooth 2016 (73.18 MB)
REQUIREMENTS:
An hboot with at least 250mb on system. These include stock hboot or Alpha Jelly (250/5/182) hboot
A 512mb - 1.5gb EXT partition (EXT4 recommended) on your sdcard. Use this guide to create the partition. Partitions made using other tools (CWM, Minitool Partition Wizard, etc.) will likely cause issues.
The latest TWRP (credits @Chromium) or 4EXT (credits @madmaxx82) Recovery. Old versions of CWM may cause issues.[/QUOTE]
HOW TO INSTALL:
Full wipe
Flash ROM
Boot ROM and enable A2SD before flashing GApps
Boot ROM and let it settle down (3-5 min)
CREDITS:
LiquidSmooth, SlimRoms, AOSPA, AOKP, and everyone else who has contributed
Google and CyanogenMod for the Android Security Updates
@LaidbackNikez and Evervolv - for being a forece behind the kernel that powers this ROM, as well as for the vendor files and device trees
SOURCE:
Kernel:
https://github.com/spezi77/android_kernel_htc_qsd8k
ROM:
* Base: https://github.com/LiquidSmooth
* Mods: https://github.com/spezi77
You may want to compile it yourself:
Code:
repo init -u git://github.com/spezi77/liquid.git -b kitkat
repo sync
wget https://s.basketbuild.com/uploads/devs/Cl3Kener/TOOLCHAIN/uber-arm-eabi-4.9.tar.xz
tar xvC prebuilts/gcc/linux-x86/arm -f uber-arm-eabi-4.9.tar.xz
rm uber-arm-eabi-4.9.tar.xz
. build-liquid.sh -o3 bravo
Have a nice day!
Screenshots:
[/CENTER]
So uh, like can I port this to the Nexus One
tommypacker said:
So uh, like can I port this to the Nexus One
Click to expand...
Click to collapse
Files are up now..
Hey man, you have my permission! :good:
liquid0624 has authorized me this port if I mark the rom as unofficial. Please also take care of that.
spezi77 said:
Files are up now..
Hey man, you have my permission! :good:
Click to expand...
Click to collapse
Got it booting already
Downloading now, and will soon flash it. :victory:
spezi77 said:
I am proud to present you with an incredible smooth and feature rich AOSP based ROM.
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
CPA-Poke
TheBr0ken
Cdub50
Sabermod 4.10 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimizations
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Gamma Configuration support
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
LiquidSmooth v3.0 Full list of features
NOT WORKING:
Hardware keys (Just use Soft keys or Pie control instead)
USB Mass Storage (Just use Bexton's UMS Toggle for now)
A2SD (error: SD-EXT not mounted properly; Just use Mounts2SD for now)
MMS (present in all 4.x ROMs; Just use Textra SMS instead)
Video recording (present in all 4.x ROMs)
Screen recording (brings "Unable to create output directory.")
OpenVPN (kernel issue: cannot acquire tun interface socket)
SELinux
ART
LiquidSmooth Github
Kernel Github
ROM Download - md5 333262e0d8b50468ece6de7b473dee6a
Slim Gapps - md5 279b5dea79e5deaae67253c402a43843
Please Support Liquid by Donating HERE
Click to expand...
Click to collapse
Any Chance You Could Stick To Building One Rom? haha because all your roms are epic and they would be better if you stuck to one rom
wow man ! your suprized us day to day !
thnx
did u notice ,ur thnx record cross 1000? and i am glad about it
when I install it exactly like in OP ... when it boots up I let it settle for 3-5min and then the FC's starts... Everything FC actually. Gapps , Inspire launcher , Nova Launcher , media , acore , play store and all basically anything. I do it exactly like in OP , or flash the ROM then boot the ROM , then reboot to recovery and instal gapps but still doesnt work ... When I boot it up , it just says i have no space for anything and i cant use applications , and I have no space so I wont receive SMS ... any idea?
proadi96 said:
when I install it exactly like in OP ... when it boots up I let it settle for 3-5min and then the FC's starts... Everything FC actually. Gapps , Inspire launcher , Nova Launcher , media , acore , play store and all basically anything. I do it exactly like in OP , or flash the ROM then boot the ROM , then reboot to recovery and instal gapps but still doesnt work ... When I boot it up , it just says i have no space for anything and i cant use applications , and I have no space so I wont receive SMS ... any idea?
Click to expand...
Click to collapse
Then please flash M2SD directly after the ROM and boot. Then reboot into recovery for flashing gapps. Which is your hboot? Stock: 250/40/147 ?
Sent from my Nexus 4 using XDA Free mobile app
@spezi77 You think there is not enough system storage on hboot?
deepgrass said:
@spezi77 You think there is not enough system storage on hboot?
Click to expand...
Click to collapse
Nope.. there could be too less space on data partition.
Sent from my Nexus 4 using XDA Free mobile app
Hey @spezi77 you're working hard on different kitkat roms which I find them all Identical, don't you think its better to provide one stable and complete rom instead of many different which all contain problems? I'm not here to disappoint you, but I think all these roms could be converted to each other by only some launchers and tweaks. I hope some day I can use one of your very best roms.
thanks indeed...
Inspire Launcher Settings from App Drawer (Don't touch it - it will crash and reboot your phone! To safely access Inspire Settings make a long press on the screen and then tap on the Gearwheel icon)
Click to expand...
Click to collapse
Today I have received an update for Inspire Launcher (v12.2.0). Somehow this issue is gone.
How's the rom for you? :fingers-crossed:
pro.gangster said:
Hey @spezi77 you're working hard on different kitkat roms which I find them all Identical, don't you think its better to provide one stable and complete rom instead of many different which all contain problems? I'm not here to disappoint you, but I think all these roms could be converted to each other by only some launchers and tweaks. I hope some day I can use one of your very best roms.
thanks indeed...
Click to expand...
Click to collapse
True words.. no worries, it's really hard to disappoint me.
Frankly, I am just learning about Android developments and versioning while looking for the most suitable and stable kk rom for my device. I enjoy the creative process of building roms -- especially by trying out different approaches, roms and kernel mods -- and sharing the results with you. There are a lot of dev teams out there borrowing features from each other -- giving their roms quite a similar feature set (why not?). But imho there are still noticeable differences! And even if we only talk about a specific look and feel or small innovations (have you ever seen Omni? sorry for OT).
With reference to the current bugs, you should not forget that most of them are common for all 4.x roms because they depend on the kernel. :angel:
However, enough said and I guess that by now you guys got really oversaturated! I will try my best to tone it down and focus on improving what is here!
Cheers!
I have different opinion on this. I agree that quality should be in favor over quantity.
We should be graceful @spezi77 bring us many choice to choose from, and then you can select the rom you like
and be more active in that thread, then natural selection will take it course.
@spezi77 I honor your overwhelming passion to the xda community and Desire, and your next great rom.
spezi77 said:
Then please flash M2SD directly after the ROM and boot. Then reboot into recovery for flashing gapps. Which is your hboot? Stock: 250/40/147 ?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Stock hboot, ok i will try to flash M2SD right after ROM and boot and will see
Sent from my HTC Desire using xda premium
New version available:
Hardware keys are working
A2SD is working
I hope you enjoy this one..
Hi, thx for your hard work and all the fantastic Roms for our desire. could i ask how i can transculent the statusbar? ican`t find something. Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: SlimRoms and I are not responsible for any damages to your device.
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems. The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code. All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4.
Original Features
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Unofficial Features
O2 Optimized Kernel
LibRIL updates
Added FIOPS/SIO/VR/Zen IO Schedulers
Added Badass/Hyper/Intellidemand/Lionheart/Smartmax Governors
Latest mpdecision from showp1984 hammerhead branch
Auto-brightness tweaks (more steps/dimmer in general)
init.d kernel settings script (one less app to install)
Other minor changes
Important links
Official Site - The official webpage where you can find the official download and everything you need to know about SlimRoms.
My Github - Source to the stuff I've changed.
Installation Instructions
Download, install and configure ivanich's 2.8.7.0 TWRP recovery from here.
Download and install the unofficial ROM through recovery from here.
Download and install the latest of my GApps packages from here.
Download and install the TWRP version of my odex package if desired from here. This essentially puts the dalvik-cache of system apps in /system which saves you some space in /data and also speeds up initial boot.
General Q/A
Q: Why SlimKat?
A: It is a great ROM and is very well suited for older devices.
Q: Why another SlimKat thread?
A: This is my own build with parts from various kernels that I feel are beneficial to pyramid users. It most likely won't be as stable as the official builds and therefore needs a separate thread.
Q: You just said it most likely won't be as stable. Does that mean it's buggy?
A: I will not release a build that doesn't work for me. The sensation is my only device and this build will always be my daily driver.
Q: Why not work with dexter93 to make the official build better?
A: That is my intention. We will all benefit from your support and testing. Let us know what works and what doesn't. Then it can be pulled into the official branch.
Frequently Asked Questions
How do I enable root access?
System settings -> Developer options -> Root access
First set to Disabled (if not already) and then set to Apps only or Apps and ADB.
How do I change resolution/dpi/density?
Manual: With root explorer, edit /system/build.prop and change ro.sf.lcd_density=182 to ro.sf.lcd_density=240 and reboot.
App: Download Texdroider DPI from play store to change 182 to 240 and reboot. You can then uninstall the app.
How do I change CPU min/max speed, governors and IO schedulers?
Manual: With root explorer, edit /etc/init.d/89kernel init script (setting options are in the script).
App: Download Kernel Tuner from play store.
How do I submit a bugreport?
See the Slim website instructions here. Attach the report in this thread.
What firmware/radio should I use with this ROM?
For TMOUS try: 3.32.531.14 which comes with radio 11.69A.3504.00U_11.23.3504.07_M2
For non-TMOUS try 3.32/3.33 firmware and corresponding radios from: firmware and radios
Tips/Tricks
If you use google apps, install the biggest package that you need. You want to do this because those google apps will be installed into /system. I've seen many users talk about wanting the smallest gapps they can have and then downloading just what they need from the play store. This is not a good approach for our Sensation because we have a very large /system partition and a very small /data partition (by today's standards). So, a better approach would be to get the *full* gapps package and either remove the apps that you don't need or disable them.
Odex your /system apps. This will free up quite a lot of space in the /data/dalvik-cache folder which again will give you more room for apps. There are many odex scripts available on XDA to choose from and probably even some apps in the play store. You can also try out my flashable zip here (md5sum: 04320206ec11669b2da2f5340bb647f2). Flash it after flashing GApps.
Known Bugs
Battery calibration issue on first boot causes charging to stop at 90%. Charging is normal after reboot. (Appears fixed now)
It has been reported that some bluetooth devices will fail to connect.
It has been reported that some VOIP apps will not work (Line/Skype).
It has been reported that call recording apps will not work.
Thanks
dexter93 - The guru who gave us SlimKat on the pyramid.
bruce2728 - 3.0 Kernel master
showp1984 - 3.0 Kernel master
SebastianFM - 3.0/3.4 Kernel master
sultanxda - 3.0/3.4 Kernel master
ivanich - 3.4 Kernel master
All other devs who have made the Sensation a fantastic device for over 3 years!
XDA:DevDB Information
Unofficial SlimKat (pyramid), ROM for the HTC Sensation
Contributors
LordNerevar
Source Code: https://github.com/LordNerevar
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 3.32/3.33
Based On: AOSP
Version Information
Status: Testing
Created 2014-09-27
Last Updated 2016-01-12
Updates
Slim-pyramid-4.4.4.build.9.1-UNOFFICIAL-20160110-1414.zip
md5sum: 64a42295ee176c261b90468167c194a9
Updated to SlimKat 9.1
Updates to Bluetooth
Allow for F2FS on /system
Trying graphite compile optimization switch
User (instead of userdebug) build to save space in /data
Incorporation of Google's security bulletin patches through January 2016.
Older Releases:
9.0 Update 3: Slim-pyramid-4.4.4.build.9.0-UNOFFICIAL-20151011-1254.zip
md5sum: 7cfe0ea4d5f335a00dde66ab3adf69f0
Unofficial Changes:
Built with UberTC 4.8.5 toolchain (Kernel and ROM)
Kernel updated to 3.4.109
F2FS support for data/cache
ART is now working
Bluetooth updates
Thermald built into the kernel
Numerous security updates including those for stagefright
9.0 Update 2: Slim-pyramid-4.4.4.build.9.0-UNOFFICIAL-20150111-1119.zip
md5sum: b5dd51eb9e7dc3c3c1056ef76e963f88
Unofficial Changes:
Bluetooth and VOIP updates
9.0 Update 1: Slim-pyramid-4.4.4.build.9.0-UNOFFICIAL-20150105-2015.zip
md5sum: 7f12f89139d1e8e52e57084cb2dddf99
Unofficial Changes:
DashClock settings widget workaround for missing hdpi resources
Reverted vertical recording rotation hack which was broken recently
9.0: Slim-pyramid-4.4.4.build.9.0-UNOFFICIAL-20141221-2104.zip
md5sum: 93adac135d40010977c91b705debc806
Unofficial Changes:
No changes
8.20 Update 2: Slim-pyramid-4.4.4.build.8.20-UNOFFICIAL-20141209-1947.zip
md5sum: df2a03543a8db9e1fca6bdebf40e4549
Unofficial Changes:
Fix video camera stuttering from last build
8.20 Update: Slim-pyramid-4.4.4.build.8.20-UNOFFICIAL-20141209-0135.zip
md5sum: 7993a7df357c647517b0c23eea61ce21
Unofficial Changes:
Linux Kernel 3.4.105
Optimized LDFLAGS
Fixed lockscreen target selection
8.18 Update: Slim-pyramid-4.4.4.build.8.18-UNOFFICIAL-20141201-2127.zip
md5sum: e70f7f09cc5dda0ef382f16b70e7011b
Unofficial Changes:
MediaProvider updates from the CM base applied (see github for details)
Device tree updates (see github for details)
8.16 Update: Slim-pyramid-4.4.4.build.8.16-UNOFFICIAL-20141124-1939.zip
md5sum: 35c817148cdbb137f502e1a55cdfb1c1
Unofficial Changes:
ROM compiled with JustArchi optimizations for gcc 4.8 (it's not 6x faster as mentioned on that page but there may be some gains - you tell me)
Switched back to SIO for default scheduler (ROW was also giving me disk IO errors which cause FCs)
Added cooler color control in 89kernel
8.14 Update: Slim-pyramid-4.4.4.build.8.14-UNOFFICIAL-20141118-1755.zip
md5sum: f9b77e52154b6c510dff5a42d0326022
Unofficial Changes:
ROM compiled with gcc 4.8
Kernel copiled with gcc 4.8 (thanks to ivanich for finding the compiler option to get it booting)
ROW replaces FIOPS as the default scheduler (I was getting a lot of disk errors with FIOPS)
Use low-power flash when battery is low (thanks again to ivanich)
New adreno libs (thanks to sultan)
TCP congestion algorithm control (see 89kernel init script)
8.10 Update: Slim-pyramid-4.4.4.build.8.10-UNOFFICIAL-20141107-2317.zip
md5sum: 92d7b29e844a51cc01cf203e90cba9b1
Unofficial Changes:
USB OTG support
FIOPS replaces SIO as the default scheduler
Camera fixes
framework_av updates from CM
8.9 Update: Slim-pyramid-4.4.4.build.8.9-UNOFFICIAL-20141028-2037.zip
md5sum: 51cf55785c3acd53d3b59dfbb428b60d
Unofficial Changes:
Kernel updated to 3.4.104
Dalvik fixes
framework_av updates from CM
8.8 Update: Slim-pyramid-4.4.4.build.8.8-UNOFFICIAL-20141021-1253.zip
md5sum: 53c2441fbdef9b25fb9d285e4030bb87
Unofficial Changes:
Kernel incrementally updated to 3.4.94
Smartmax is now the default governor
Dalvik optimizations
8.6.1 Update: Slim-pyramid-4.4.4.build.8.6.1-UNOFFICIAL-20141015-2143.zip
md5sum: 6d728e918b8f7ad50933eb5ee81cf6ac
Unofficial Changes:
Kernel incrementally updated to 3.4.87
Added smartmax and hyper governors and updated intellidemand
Added vr and zen IO schedulers
8.4 Update: Slim-pyramid-4.4.4.build.8.4-UNOFFICIAL-20141008-1325.zip
md5sum: 17478f4a486b0a497a34f2d228886517
Unofficial Changes:
Get proprietary HTC blobs from TheLoonyBin
Fixed AC charging not starting immediately while in sleep
Added Vol2Wake setting to 89kernel (defaults to enabled)
8.2 Update: Slim-pyramid-4.4.4.build.8.2-UNOFFICIAL-20140930-0610.zip
md5sum: 5527dc8197b435d3370c149cbb36c87c
Unofficial Changes: Volume Rocker Wake Fix
Original Release: Slim-pyramid-4.4.4.build.8.1-UNOFFICIAL-20140926-1855.zip
md5sum: a5a0792ed2d89e213d0ac75e2e936d06
Good features! Thanks mate!
^^Hello, fellow Minchanin.
Xda: devdb? What does that green banner mean?
Are there any collaborative efforts between you and dexter?
Hello,
First off many thanks for your great work & contribution!
I would need S2W or a similar feature as the "Volume Rocker Wake" feature does not work in Slimkat. Would you have any recommendation for a custom kernel that I could flash that has such a feature?
Thank you.
what about cpu undervolt? is it working on this rom?
For sure, just tested this rom and its absolutely fast! With Lionheart governor and Sio I/O scheduler. But one question @LordNerevar, which option is the best for Multi-Core power savings?
ThatsABigOne said:
Xda: devdb? What does that green banner mean?
Click to expand...
Click to collapse
Nothing special. Just that the ROM has been added to the XDA database: http://forum.xda-developers.com/devdb/
ThatsABigOne said:
Are there any collaborative efforts between you and dexter?
Click to expand...
Click to collapse
Not yet, but I hope there will be in the future (see the Q/A section).
wieman01 said:
I would need S2W or a similar feature as the "Volume Rocker Wake" feature does not work in Slimkat. Would you have any recommendation for a custom kernel that I could flash that has such a feature?
Click to expand...
Click to collapse
Sultan's kernel had S2W for awhile but it caused lockups/reboots. I'll see if I can find why the Volume Rocker Wake doesn't work.
cclaxx said:
what about cpu undervolt? is it working on this rom?
Click to expand...
Click to collapse
I believe that is a custom Sultan feature that I haven't implemented. I take it you found it beneficial?
saldymhmd said:
But one question @LordNerevar, which option is the best for Multi-Core power savings?
Click to expand...
Click to collapse
Here is some technical information if you're so inclined...
http://lwn.net/Articles/297306/
LordNerevar said:
Nothing special. Just that the ROM has been added to the XDA database: http://forum.xda-developers.com/devdb/
I believe that is a custom Sultan feature that I haven't implemented. I take it you found it beneficial?
Click to expand...
Click to collapse
ye, i think that battery drain is the major problem of aosp roms... so a fewer cpu voltage could help
btw thank you for still develop for our device :good:
LordNerevar said:
Sultan's kernel had S2W for awhile but it caused lockups/reboots. I'll see if I can find why the Volume Rocker Wake doesn't work.
Click to expand...
Click to collapse
Thank you. Let me outline what has happened so far: Clean install of Slimkat (v7.9) with a formatted SD card and the system fully wiped. "Volume Rocker Wake" is enabled, however, only works for a few seconds after the screen has turned off. It also works perfectly when the phone is connected to a USB charger.
Occasionally the wake function would work even when the phone isn't charging, but this happens fairly randomly, no obvious pattern.
First of all, great rom!
Feels smooth and a lot of features.
But....... what about the resolution?
statusbar clock and such is really small, icons in appdrawer too, it almost looks like the resoltion is set to high.
When using google stock launcher the icons are normal but statusbar is still much smaller then the stock rom.
Is this changeable?
Grtz,
Ruben
g-member said:
First of all, great rom!
Feels smooth and a lot of features.
But....... what about the resolution?
statusbar clock and such is really small, icons in appdrawer too, it almost looks like the resoltion is set to high.
When using google stock launcher the icons are normal but statusbar is still much smaller then the stock rom.
Is this changeable?
Grtz,
Ruben
Click to expand...
Click to collapse
simply change density in build.prop to 240
Alternatively use TexDroid to change DPI to 240.
https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi&hl=de
You need to grant root access in order for the tool to work.
Thanks for answering questions everyone! I've started an FAQ on the OP for the ones I've seen often on the Official SlimKat ROM thread.
I was able to fix the volume rocker wake bug in the kernel. It's working for me with and without a secure lockscreen enabled. Try it out if you need it. That along with all the 8.2 goodness from the Slim team is available in the 2nd post.
No way... Thank you very much! I shall give it a try tonight. I am very excited!
Just out of curiousity... What is a bug and if so what exactly was the problem?
Also would it make sense to report this back to the Slim Team, so they can fix this as well? I have seen other posts that report similar problems.
Thank you for you great support!
LordNerevar, your latest version fixed the volume rocker issue. Even better I did not have to clean-install, I simply upgraded from Dexter93's version 7.9 to yours and my phone works perfectly. I am more than happy and this has breathed new life into my old Sensation. Thank you very much!
Perhaps you can join forces with Dexter in that you let him know how you eliminated this bug?
Good job!
Upon closer examination of the code, I found that you can actually set /sys/keyboard/vol_wakeup to 1 and enable Volume Rocker Wake under Settings->Display as normal. This should even work with the Official versions. I will add this ability to the 89kernel init script.
Thank you, LordNerevar. Guess that is the fix I have been looking for. I never noticed that file.
Interestingly mine is still set to zero, but volume wake works nonetheless with your latest version.
wieman01 said:
Interestingly mine is still set to zero, but volume wake works nonetheless with your latest version.
Click to expand...
Click to collapse
That's correct. My latest version bypasses the need for that file. However, that file does serve a purpose and I was actually going to implement it when I found it already available. The purpose is that if you don't want volume rocker wake, having that tunable will keep the phone in sleep mode if the volume buttons are pressed. Without that file or with that file bypassed, if you have volume rocker wake disabled in display settings the phone comes out of sleep mode and just doesn't turn on the display.
So, with my next version you will need to enable the setting in 89kernel and in display settings for it to work.
NuSenseSIX
Lollipop
5.0.2
HTC Sense 6.0
Multi-Carrier
Official 5.0.2 Developer m7 Base:
7.17.1540.7
CL468180 - LRX22G release-keys
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About The Roms:
NuSenseSIX Lollipop
Now fully rebased from Official m7 Sense 6 Lollipop from HTC
The original NuSenseSIX ROM was a port for the Verizon HTC One m7.
I do not own a Gsm HTC One.
But I have done my best to blindly port this over and will do my best to make it as functional as I can.
All I ask for, is detailed feedback. :good:
The rom should be very functional, but this Gsm version is untested.
It was made from an odex system dump.
It has been deodexed and modified for your device and network.
I hope you enjoy NuSenseSIX!
______
Some of the Features:
All new m7 Sense 6.0 - Android 5.0.2 Base
Extreme Power Saver Mode
Advanced Power Menu
1% Battery options
Center clock option
App Drawer Grid Options
Beats Audio
Multi-Carrier support
Prism Gap fix Mod - optional
Transparent widgets - optional
Custom DPI options
Notification Tweaks
Audio FX - optional
Eleven Music Player - optional
Sense 6 Toolbox
Xtended Settings
Music Channel Toggle - lyrics/pulldown/visuals
Sweep2wake
Sweep2sleep
DoubleTap2Wake
Logo2Menu
DoubleTap2sleep statusbar - optional
New 2014 Camera
Deodexed and optimized
Updated most Market Apps
Rooted with latest SuperSU v2+
10 Default HTC color themes included and enabled
Native HTC Wifi Hotspot (enabled for all users)
Native No Lockscreen
Font changer in settings
HTC EQS
HTC Backup
HTC Task Manager
Xposed Framework
Viper4Android
Busybox
Launcher Options
Traditional Wake features
Motion Gestures: S2W, S2Dial, DT2W, etc
and much more...
Mods will be in Post #2
Changelogs in post #3
Code:
[B][COLOR="Red"]Sharing Policy:[/COLOR][/B]
If you would like to use this rom or parts of this rom, in your own, you must ask me for permission first!
Please do this via PM, so as not to distract from the purpose of the thread.
These matters are best dealt with privately, for everyone's sake.
Thanks for your understanding and consideration.
Violators of the above, will be reported to XDA Moderation for proper handling.
PLEASE DO NOT MIRROR MY FILES
I TRACK DOWNLOADS TO KNOW WHAT PROJECTS STILL HAVE INTEREST!!!
(ie: your mirrors could cause the project to end early)
DOWNLOAD:
LOLLIPOP
Official 5.0.2 Dev Base
7.17.1540.7
NuSenseSIX v10.6 Multi-Carrier
02-13-15
If device hangs on first boot, hold power to hard reboot.
This can happen due to some of the aroma kernel customizations, that require a second boot.
I DO NOT OWN A GSM M7 - I AM ON VERIZON
I HAVE NOT TESTED THIS BUILD ON GSM
THIS IS BETA AND COMES WITH NO GUARANTEES
I have run my Verizon port of this however and it runs quite well.
I HOPE IT WORKS FOR YOU AND THAT YOU ENJOY IT!!!!
Old Builds:
NuSenseSIX v10.4 Multi-Carrier
02-10-15
____________
Required Recovery:
TWRP 2.7.0.8 or Newer
Latest Radios and Firmware are REQUIRED
7.17.1540.7 firmware with stock recovery and boot.img removed (no wipe)
-or-
7.17.1540.7 firmware with stock recovery and boot.img removed
- same as above with RED TEXT REMOVED (no wipe)
Wake Features
To enable Wake Features:
The included kernel includes dt2w, s2w, s2s, l2m, etc,...use Trickster mod to configure.
OLD Versions:
Wanna buy me a coffee to keep me going?
CLICK HERE
Original Verizon Thread: LINK
Sprint Thread: LINK
GSM Thread: LINK
Thanks:
Google - Android OS
HTC - Sense 6.0 base
Disconnecktie - Testing
Flar2 - Kernel tweaks/Gestures
Source - Link
XDA:DevDB Information
NuSenseSIX KitKat Sense 6.0, ROM for the HTC One
Contributors
santod040
Source Code: https://github.com/santod/google_kernel_m7_3.4.10-g1a25406/tree/NuK3rn3l-Sense
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.xx
Based On: Sense 6.0
Version Information
Status: Testing
Current Beta Version: v10.4
Beta Release Date: 2015-02-10
Created 2015-02-10
Last Updated 2015-03-16
Reserved
FAQ
SdCard
Q.)
The sdcard not being visible via PC is annoying.
Is there any fix for this yet?
THIS MAY OR MAY NOT BE NEEDED
Every device seems to handle Lollipop differently, some handle the new formatting fine.
Some have the above issue.
The below commands will resolve this.
A.)
Yes, here is a work-around
Install Terminal Emulator then type:
Code:
su
press enter
Code:
restorecon -FR /data/media/0
press enter
Reserved
NuSenseSIX
Changelog
_____
5.0.2
NuSenseSIX 10.6 - 02-13-15
Update ramdisk
Update SePolicy
Fix Media Output
Fix 3-dot menu in Account Sync
Update Se Contents
Added App-Ops to Security Settings
Added ambient display in display options(notif only)
Add some services to boot class
Enable proper perms for gyro
Enabled Aosp Power Control Toggle widget
Added Messaging to EPS mode for Vzw
Added Aosp/Material Browser optional
Aroma fix-ups for dirty/repeat reflashing
Added lib for Sprint/QC specific Location services
Removed some mods from aroma and added to new modpack
Cleanup and more...
NuSenseSIX 10.4 - 02-10-15
Rebased to first Offical m7 Developer Edition 5.0.2 base
Lollipop 7.17.1540.7 CL468180 release-keys
Initial introduction of carrier support via aroma
- Verizon, International(Gsm), and Sprint
Rewrote aroma scripts
Complete redo of optional APM using new framework
Rooted with latest SuperSu
Disabled system write protection on new base
No more screen wake issues
Fixed Music Channel f/c that still exists in official(c'mon HTC)
Added latest NuK3rn3l Sense Lollipop build with aroma configs
Added back most of the latest NuSenseSIX features
Added the remaining 10th theme from my modpack options(not my fav)
Couple more boot animation options
Cleaned up aroma
Updated all Market apps
Updated all HTC apps
Starting work on updated modpack,...stay tuned
Thanks
:thumbup:
Just commented about your relentless development pace on your GPE thread. And here you are with yet another Rom. Where do you find the time man!
A must try as usual
Sent from my HTC One
---------- Post added at 07:45 PM ---------- Previous post was at 07:40 PM ----------
Download link not working? Ah it's uploading.
Sent from my HTC One
Updated to Official m7 Developer 5.0.2 base: 7.17.1540.7
5.0.2
NuSenseSIX 10.4 - 02-10-15
Rebased to first Offical m7 Developer Edition 5.0.2 base
Lollipop 7.17.1540.7 CL468180 release-keys
Initial introduction of carrier support via aroma
- Verizon, International(Gsm), and Sprint
Rewrote aroma scripts
Complete redo of optional APM using new framework
Rooted with latest SuperSu
Disabled system write protection on new base
No more screen wake issues
Fixed Music Channel f/c that still exists in official(c'mon HTC)
Added latest NuK3rn3l Sense Lollipop build with aroma configs
Added back most of the latest NuSenseSIX features
Added the remaining 10th theme from my modpack options(not my fav)
Couple more boot animation options
Cleaned up aroma
Updated all Market apps
Updated all HTC apps
Starting work on updated modpack,...stay tuned
santod040 said:
5.0.2
NuSenseSIX 10.4 - 02-10-15
Rebased to first Offical m7 Developer Edition 5.0.2 base
Lollipop 7.17.1540.7 CL468180 release-keys
Initial introduction of carrier support via aroma
- Verizon, International(Gsm), and Sprint
Rewrote aroma scripts
Complete redo of optional APM using new framework
Rooted with latest SuperSu
Disabled system write protection on new base
No more screen wake issues
Fixed Music Channel f/c that still exists in official(c'mon HTC)
Added latest NuK3rn3l Sense Lollipop build with aroma configs
Added back most of the latest NuSenseSIX features
Added the remaining 10th theme from my modpack options(not my fav)
Couple more boot animation options
Cleaned up aroma
Updated all Market apps
Updated all HTC apps
Starting work on updated modpack,...stay tuned
Click to expand...
Click to collapse
Downloading, will let you know how it runs on my GSM device, Thanks :good:
download link?
Download link is dead. Reupload pls
Do I need s-off to try this?
Edit: DOWNLOADING
T-MO Wifi Calling?
pufnasti said:
Download link is dead. Reupload pls
Do I need s-off to try this?
Click to expand...
Click to collapse
Link is fine.
If you are not s-off, you may need to fastboot flash the boot.img.
The boot.img is somewhat created/modified through your aroma options though, so that may or may not work, you'd have to try it.
If you end up having to try the fastboot flash method, you'll want the one in the boot_gsm folder.
shpitz461 said:
T-MO Wifi Calling?
Click to expand...
Click to collapse
I cannot test T-Mobile features sorry, you can try it and let others know though.
I saw some added support for that feature in the base, but I don't know if it specifically supports T-Mobile or not.
I'll try it to flash from twrp first and let u know.
santod040 said:
I cannot test T-Mobile features sorry, you can try it and let others know though.
I saw some added support for that feature in the base, but I don't know if it specifically supports T-Mobile or not.
Click to expand...
Click to collapse
I might give it a shot, tnx!
How about battery life?
Well got it installed using TWRP latest version on a GSM device, nice aroma, had a bit of a hick up at the beginning com.android settings process has stopped, so I had no mobile data, connected to wifi fine after that and also my Bluetooth watch, had to go into mobile data and reset my access point to get mobile data working due to the earlier process error, rebooted and stuck at the white HTC screen with the red warning. , holding down the power button for 15 blinks reset the device and booted after that.
I'm stuck at the boot splash. It boots because I can turn on/off the screen and I hear the volume change sound. The setup does not show up, all I'm seeing is the boot splash.
xero110 said:
I'm stuck at the boot splash. It boots because I can turn on/off the screen and I hear the volume change sound. The setup does not show up, all I'm seeing is the boot splash.
Click to expand...
Click to collapse
Try and manually restart by holding down power button.
Different kernel configs will need a second boot after install.
santod040 said:
Try and manually restart by holding down power button.
Different kernel configs will need a second boot after install.
Click to expand...
Click to collapse
I did 3 times, I know this from flar2's kernel. No luck though. If it helps, I picked the blue Google spinning splash.
xero110 said:
I did 3 times, I know this from flar2's kernel. No luck though. If it helps, I picked the blue Google spinning splash.
Click to expand...
Click to collapse
no problem with boot here now after the first one which got stuck, all good so far but lots to test yet.
Seanie280672 said:
no problem with boot here now after the first one which got stuck, all good so far but lots to test yet.
Click to expand...
Click to collapse
OK, Thanks. I'll try a different set of options later tonight.
xero110 said:
OK, Thanks. I'll try a different set of options later tonight.
Click to expand...
Click to collapse
For the kernel I just set everything to stock, im not into overclocking my phone, Lollipop is plenty fast enough for me, set the Android L boot animation, removed most widgets and Google / HTC apps I never use and class as bloat, used HTC launcher with gap fix etc, first boot took somtime, 2nd boot frozen and needed the power button holding down to reset, 3rd and 4th has booted fine, flashed with TWRP 2.8.4.0, just tyo give you some idea of the settings I used.