Database Info

[Q] twrp and cm10 problem

New to me tablet and I'm new to rooting/etc.
Factory tablet on 4.1.1, build 10.4.2.20-20121228
I downloaded and ran the Asus unlock utility, then ran motochopper to root. I then loaded TWRP 2.2.2.0 (I realized the mistake later). Made stock backup using twrp ok. Wiped cache/dalvik/etc and tried to recover to CM.10.0.0. Boots to cyanogenmod logo and just sits and spins. I can reboot back into recovery and restore from backup ok.
I realize now that I've loaded an early version of twrp, would that affect the cm bootup? If so, how do I upgrade twrp? Or should I try CM10.1 exp using twrp 2.2.2.0?

kbud123 said:
New to me tablet and I'm new to rooting/etc.
Factory tablet on 4.1.1, build 10.4.2.20-20121228
I downloaded and ran the Asus unlock utility, then ran motochopper to root. I then loaded TWRP 2.2.2.0 (I realized the mistake later). Made stock backup using twrp ok. Wiped cache/dalvik/etc and tried to recover to CM.10.0.0. Boots to cyanogenmod logo and just sits and spins. I can reboot back into recovery and restore from backup ok.
I realize now that I've loaded an early version of twrp, would that affect the cm bootup? If so, how do I upgrade twrp? Or should I try CM10.1 exp using twrp 2.2.2.0?
Click to expand...
Click to collapse
I can see you are on the 4.1 BL. I would suggest upgrading to the 4.2 bootloader and the using the most recent versions of TWRP and CM. You would do that by flashing the stock 4.2 Asus firmware, then the latest TWRP from their website with -42 and then the latest cyanogen mod ROM which is compatible with that bootloader.

cmendonc2 said:
I can see you are on the 4.1 BL. I would suggest upgrading to the 4.2 bootloader and the using the most recent versions of TWRP and CM. You would do that by flashing the stock 4.2 Asus firmware, then the latest TWRP from their website with -42 and then the latest cyanogen mod ROM which is compatible with that bootloader.
Click to expand...
Click to collapse
First off, thank you for the assistance. Here are the steps I believe I should take. Please correct me if I'm wrong.
1. Download and install latest 4.2 bootloader from Asus= US_epad-10.6.1.27.5
2. Would I need to download and install the unlocker from Asus? = Unlock_v8 for 4.2JB
3. Download and install TWRP for 4.2= TWRP 2.6.3.0-tf300t-4.2 blob
4. Then I should be able to run any of the CM 10.0.0 and up on the 4.2 bootloader, right?

kbud123 said:
First off, thank you for the assistance. Here are the steps I believe I should take. Please correct me if I'm wrong.
1. Download and install latest 4.2 bootloader from Asus= US_epad-10.6.1.27.5
2. Would I need to download and install the unlocker from Asus? = Unlock_v8 for 4.2JB
3. Download and install TWRP for 4.2= TWRP 2.6.3.0-tf300t-4.2 blob
4. Then I should be able to run any of the CM 10.0.0 and up on the 4.2 bootloader, right?
Click to expand...
Click to collapse
Lots of ppl are having problems with the V8 unlocker. Since you are already on 4.1, you could just unlock now with the V7 tool.
1. Unlock with V7 tool (http://forum.xda-developers.com/showthread.php?t=1949758)
2. Flash Latest Asus Stock (http://forum.xda-developers.com/showthread.php?t=1949758)
3. Download and install TWRP for 4.2= TWRP 2.6.3.0-tf300t-4.2 blob (http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.6.3.0-tf300t-4.2.blob)
4. Flash Latest CM (http://forum.xda-developers.com/showthread.php?t=2413878)
Personally, I would also make NvFlash Backups so you can restore your tablet just in case anything bad happens. Link is in my sig

cmendonc2 said:
Lots of ppl are having problems with the V8 unlocker. Since you are already on 4.1, you could just unlock now with the V7 tool.
1. Unlock with V7 tool (http://forum.xda-developers.com/showthread.php?t=1949758) Why would I use this now? Shouldn't I already be unlocked?
2. Flash Latest Asus Stock (http://forum.xda-developers.com/showthread.php?t=1949758)Will this put a locked or unlocked version on the tablet?
3. Download and install TWRP for 4.2= TWRP 2.6.3.0-tf300t-4.2 blob (http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.6.3.0-tf300t-4.2.blob)
4. Flash Latest CM (http://forum.xda-developers.com/showthread.php?t=2413878)
Personally, I would also make NvFlash Backups so you can restore your tablet just in case anything bad happens. Link is in my sig From what I'm reading, I can only do this after updating to 10.6.?.? So I would have to update to the latest Asus stock, then run this procedure.
Thanks again, and I appreciate your patience.
Click to expand...
Click to collapse

Ok, been reading until my eyes are bleeding.
From what I've read, Motochopper doesn't work for 10.6.1.27.x versions, so I would have to load 10.6.1.15.3. I should be able to download it and unzip it the first time on my pc. Then transfer it to the root directory of the tablet and run TWRP to install the .zip file. This would overwrite everything and bring it up to 4.2. I would then run the unlocker_v8 and install twrp for 4.2 using adb. If all that works, I should be rooted and unlocked and allowed to install CM 10 and above.
Please, anyone, check me on this. And thanks for the help.

kbud123 said:
Ok, been reading until my eyes are bleeding.
From what I've read, Motochopper doesn't work for 10.6.1.27.x versions, so I would have to load 10.6.1.15.3. I should be able to download it and unzip it the first time on my pc. Then transfer it to the root directory of the tablet and run TWRP to install the .zip file. This would overwrite everything and bring it up to 4.2. I would then run the unlocker_v8 and install twrp for 4.2 using adb. If all that works, I should be rooted and unlocked and allowed to install CM 10 and above.
Please, anyone, check me on this. And thanks for the help.
Click to expand...
Click to collapse
Oh sorry, I thought you meant that it had failed to unlock and flash.
Flashing a stock ROM will not relock your bootloader. Asus doesn't want people relocking their bootloader .
I'm not sure why you are using motochopper if you are going to install a custom ROM anyways. Almost all custom ROMs have the SU binaries in them.
Once you have unlocked your tablet, you will never need to run another unlocker, so dont worry about v8. The NvFlash backups need you to be on the 10.6.x.x bootloader, so you would flash the stock ROM then do the nvflash procedure.

cmendonc2 said:
Oh sorry, I thought you meant that it had failed to unlock and flash.
Flashing a stock ROM will not relock your bootloader. Asus doesn't want people relocking their bootloader .
I'm not sure why you are using motochopper if you are going to install a custom ROM anyways. Almost all custom ROMs have the SU binaries in them.
Once you have unlocked your tablet, you will never need to run another unlocker, so dont worry about v8. The NvFlash backups need you to be on the 10.6.x.x bootloader, so you would flash the stock ROM then do the nvflash procedure.
Click to expand...
Click to collapse
Just so I'm clear, I should be able to flash the stock rom w/ the TWRP I have now, using the install command for the zip file, right?

kbud123 said:
Just so I'm clear, I should be able to flash the stock rom w/ the TWRP I have now, using the install command for the zip file, right?
Click to expand...
Click to collapse
I'm not sure if you can flash the stock from the TWRP, to be safe I'd fastboot it from a computer. Once you flash the stock, it will upgrade the bootloader and erase TWRP. You would use the install command.

Success so far! I got it updated to 4.2.1 /10.6.1.27.5 using http://forum.xda-developers.com/showpost.php?p=35294881&postcount=1.

Tuturial on how to root HUAWEI INSPIRA H867G Straight Talk, Net Ten, etc....

To root Huawei Inspira
go to http://forum.xda-developers.com/showthread.php?t=2130276
Download Framaroot I used V 1.6.0 install the app, Use GANDALF exploit and install SuperSU not superuser I had a lot of trouble with superuser but CWM SU or ChainsDD SU works fine,
After binary was install I updated SU and Installed Busybox.
worked great.

se7encircles said:
To root Huawei Inspira
go to http://forum.xda-developers.com/showthread.php?t=2130276
Download Framaroot I used V 1.6.0 install the app, Use GANDALF exploit and install SuperSU not superuser I had a lot of trouble with superuser but CWM SU or ChainsDD SU works fine,
After binary was install I updated SU and Installed Busybox.
worked great.
Click to expand...
Click to collapse
Does this SIM unlock the phone to use on other carriers?

Does anyone have the stock rom image for the Huawei Inspira? Mine is currently bricked and I would really appreciate it!

Any help?
Has anyone been able to SIM unlock this phone? I'm also having problems unlocking the bootloader, my phone is not recognized when I connect it in fastboot mode. Any other mode I plug it in and it's recognized, but not in fastboot mode

me to
josegregorio3980 said:
Has anyone been able to SIM unlock this phone? I'm also having problems unlocking the bootloader, my phone is not recognized when I connect it in fastboot mode. Any other mode I plug it in and it's recognized, but not in fastboot mode
Click to expand...
Click to collapse
I have not figured out how to unlock bootloader or even get the fastboot to be reconized. I have tried downloading fastboot binary and that didnt work either

how
rawrz said:
Does anyone have the stock rom image for the Huawei Inspira? Mine is currently bricked and I would really appreciate it!
Click to expand...
Click to collapse
I am thinking about trying to root my Huawei H867G straight talk phone using the method above, but may I ask how you bricked your phone. I don't see much information about rooting this model on the internet so there isn't much support. thanks.
Also was anyone able to install CWM and if so how, Was that done after rooting and were there any problems while installing it?

Stock rom image for Huawei H867G
I found this on the Huawei website and it says this image covers these 3 models. suitable for H867G，H881C，H868C.
Still looking for more information regarding rooting this with Framaroot and installing CWM. I would love to post a link but I don't have the required 10 post to do so, and I don't want to troll 10 threads to do so. EDIT I CAN POST LINK! here is a screenshot image as an attachment. Here is the link:
http://consumer.huawei.com/en/support/search/index.htm?keywords=H867g
Open link and click on downloads.

I know this thread is old, but I just updated my above post with a link to stock Rom. But was anyone ever able to install CWM or Twrp recovery to Huawei H867G?
Sent from my SM-T230 using XDA-Developers mobile app

trentenmarschel said:
I know this thread is old, but I just updated my above post with a link to stock Rom. But was anyone ever able to install CWM or Twrp recovery to Huawei H867G?
Click to expand...
Click to collapse
I rooted the 867 g using kingroot haven't found a custom recovery for it yet however

[Q] Why does Super su says "No binaries installed"

Just flashed the factory Rom and got everything set up. I flashed TWRP then tried to flash the latest SuperSu to get root and it installed it but when I went to open it it would say that I don't have any binaries installed and I can't uninstall SuperSU either. I tried to install CWM Recovery and refresh it through there but I still have the same issues... :/ What am I doing wrong or how can I get my phone rooted properly? Thanks for any help!

Nocturnal86 said:
Just flashed the factory Rom and got everything set up. I flashed TWRP then tried to flash the latest SuperSu to get root and it installed it but when I went to open it it would say that I don't have any binaries installed and I can't uninstall SuperSU either. I tried to install CWM Recovery and refresh it through there but I still have the same issues... :/ What am I doing wrong or how can I get my phone rooted properly? Thanks for any help!
Click to expand...
Click to collapse
You need to flash a kernel that is permissive and then flash SuperSU there are a few in the forums if you search you shall find them

Instead of a permissive kernel, simply use Chainfire's AutoRoot, which will flash a more secure kernel and SuperSU automatically. You don't even need TWRP for this. http://download.chainfire.eu/363/CF-Root/CF-Auto-Root/CF-Auto-Root-hammerhead-hammerhead-nexus5.zip
Go to http://autoroot.chainfire.eu/ to get AutoRoot for other devices.

aalaap said:
Instead of a permissive kernel, simply use Chainfire's AutoRoot, which will flash a more secure kernel and SuperSU automatically. You don't even need TWRP for this. http://download.chainfire.eu/363/CF-Root/CF-Auto-Root/CF-Auto-Root-hammerhead-hammerhead-nexus5.zip
Go to http://autoroot.chainfire.eu/ to get AutoRoot for other devices.
Click to expand...
Click to collapse
So I flash this in ADB? Is the secure kernel the same as stock? and if I were to flash a customer kernel like FK would I lose root? Sorry for all the questions just trying to clarify some stuff so I'm not completely ignorant to what I'm doing lol

There's a batch file that does it. You run it in the bootloader, not ADB.
FK has a Lollipop compatible kernel, but try and root stock first. Then flash FK's Lollipop version (it's different) and run CF AutoRoot again. Just to be sure things are working. Personally, I'm going to use stock for a while, understand the performance and then try FK or EX or whatever, so I'll be able to tell the difference.

supersu says su bnaries are not installed

i have moto g 1st gen.
i have successfully unlocked the bootloader from motorola site. After that i flashed cwm recovery from windows and using the recovery first i flashed SUPERSU and then the rom SLIMSABER. The rom successfully installed and then i installed titanium backup it says cant access the root folder. I opened supersu it says SU BINARIES ARE NOT PROPERLY INSTALLED . REROOT MANUALLY.
PLEASE HELP
THANKS

Did you update SuperSU on Play Store?

yes i have updated supersu from playstore
please help
thanks

DavaySuka said:
Did you update SuperSU on Play Store?
Click to expand...
Click to collapse
yes i have updated supersu from playstore
please help
thanks

Maybe you should download the flashable zip of supersu from chainfire site then flash it through your custom recovery, and i think you better use twrp recovery, it's more updated. Hope this could help you...

Flash zip in custom recovery: https://download.chainfire.eu/396/supersu/

Bootloop, Twrp doesn't flash any file, even the Supersu Zip

Well, i tried rooting my device (Marshmellow) with both methods (www) andro4all (.) com/2016/01/rootea-moto-g-en-un-click (www) quora (.) com/How-can-I-root-my-Moto-G3-running-in-Android-6-0-1-marshmallow
But when i install the recovery, the device enters in bootloop, in the first method i can flash the supersu file successfully, but it doesn't rooted the device, after that i tried flashing roms and other supersu zip and i don't have any backup because I had already rooted a device before and because of how reliable the previous pages looked like. Any idea what to do at this point?
Any help is appreciated

Inari~ said:
Well, i tried rooting my device (Marshmellow) with both methods (www) andro4all (.) com/2016/01/rootea-moto-g-en-un-click (www) quora (.) com/How-can-I-root-my-Moto-G3-running-in-Android-6-0-1-marshmallow
But when i install the recovery, the device enters in bootloop, in the first method i can flash the supersu file successfully, but it doesn't rooted the device, after that i tried flashing roms and other supersu zip and i don't have any backup because I had already rooted a device before and because of how reliable the previous pages looked like. Any idea what to do at this point?
Any help is appreciated
Click to expand...
Click to collapse
You can find better information on rooting your device here on XDA.
Use the latest TWRP recovery from twrp.me for your device.
Try using magisk as your root solution. Magisk can be found here on XDA.
I would not recommend using Supersu.
You can try flashing a Nougat ROM for your device.
If necessary you can find a stock ROM for your device and instructions on how to revert to stock here on XDA.
Sent from my Nvidia Shield Tablet using XDA Labs

jemail said:
You can find better information on rooting your device here on XDA.
Use the latest TWRP recovery from twrp.me for your device.
Try using magisk as your root solution. Magisk can be found here on XDA.
I would not recommend using Supersu.
You can try flashing a Nougat ROM for your device.
If necessary you can find a stock ROM for your device and instructions on how to revert to stock here on XDA.
Sent from my Nvidia Shield Tablet using XDA Labs
Click to expand...
Click to collapse
Ok, i installed stock and finally I left the bootloop, so the problem now is i reinstalled twrp but I still can't flash any files, any solution? and, Is it possible to flash a rom or the magisk via fastboot?
Edit: Ok, so i downloaded again the files, and everything it's fine!, it was the sdcard the one was giving problems. Thanks for your help!