New to me tablet and I'm new to rooting/etc.
Factory tablet on 4.1.1, build 10.4.2.20-20121228
I downloaded and ran the Asus unlock utility, then ran motochopper to root. I then loaded TWRP 2.2.2.0 (I realized the mistake later). Made stock backup using twrp ok. Wiped cache/dalvik/etc and tried to recover to CM.10.0.0. Boots to cyanogenmod logo and just sits and spins. I can reboot back into recovery and restore from backup ok.
I realize now that I've loaded an early version of twrp, would that affect the cm bootup? If so, how do I upgrade twrp? Or should I try CM10.1 exp using twrp 2.2.2.0?
kbud123 said:
New to me tablet and I'm new to rooting/etc.
Factory tablet on 4.1.1, build 10.4.2.20-20121228
I downloaded and ran the Asus unlock utility, then ran motochopper to root. I then loaded TWRP 2.2.2.0 (I realized the mistake later). Made stock backup using twrp ok. Wiped cache/dalvik/etc and tried to recover to CM.10.0.0. Boots to cyanogenmod logo and just sits and spins. I can reboot back into recovery and restore from backup ok.
I realize now that I've loaded an early version of twrp, would that affect the cm bootup? If so, how do I upgrade twrp? Or should I try CM10.1 exp using twrp 2.2.2.0?
Click to expand...
Click to collapse
I can see you are on the 4.1 BL. I would suggest upgrading to the 4.2 bootloader and the using the most recent versions of TWRP and CM. You would do that by flashing the stock 4.2 Asus firmware, then the latest TWRP from their website with -42 and then the latest cyanogen mod ROM which is compatible with that bootloader.
cmendonc2 said:
I can see you are on the 4.1 BL. I would suggest upgrading to the 4.2 bootloader and the using the most recent versions of TWRP and CM. You would do that by flashing the stock 4.2 Asus firmware, then the latest TWRP from their website with -42 and then the latest cyanogen mod ROM which is compatible with that bootloader.
Click to expand...
Click to collapse
First off, thank you for the assistance. Here are the steps I believe I should take. Please correct me if I'm wrong.
1. Download and install latest 4.2 bootloader from Asus= US_epad-10.6.1.27.5
2. Would I need to download and install the unlocker from Asus? = Unlock_v8 for 4.2JB
3. Download and install TWRP for 4.2= TWRP 2.6.3.0-tf300t-4.2 blob
4. Then I should be able to run any of the CM 10.0.0 and up on the 4.2 bootloader, right?
kbud123 said:
First off, thank you for the assistance. Here are the steps I believe I should take. Please correct me if I'm wrong.
1. Download and install latest 4.2 bootloader from Asus= US_epad-10.6.1.27.5
2. Would I need to download and install the unlocker from Asus? = Unlock_v8 for 4.2JB
3. Download and install TWRP for 4.2= TWRP 2.6.3.0-tf300t-4.2 blob
4. Then I should be able to run any of the CM 10.0.0 and up on the 4.2 bootloader, right?
Click to expand...
Click to collapse
Lots of ppl are having problems with the V8 unlocker. Since you are already on 4.1, you could just unlock now with the V7 tool.
1. Unlock with V7 tool (http://forum.xda-developers.com/showthread.php?t=1949758)
2. Flash Latest Asus Stock (http://forum.xda-developers.com/showthread.php?t=1949758)
3. Download and install TWRP for 4.2= TWRP 2.6.3.0-tf300t-4.2 blob (http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.6.3.0-tf300t-4.2.blob)
4. Flash Latest CM (http://forum.xda-developers.com/showthread.php?t=2413878)
Personally, I would also make NvFlash Backups so you can restore your tablet just in case anything bad happens. Link is in my sig
cmendonc2 said:
Lots of ppl are having problems with the V8 unlocker. Since you are already on 4.1, you could just unlock now with the V7 tool.
1. Unlock with V7 tool (http://forum.xda-developers.com/showthread.php?t=1949758) Why would I use this now? Shouldn't I already be unlocked?
2. Flash Latest Asus Stock (http://forum.xda-developers.com/showthread.php?t=1949758)Will this put a locked or unlocked version on the tablet?
3. Download and install TWRP for 4.2= TWRP 2.6.3.0-tf300t-4.2 blob (http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.6.3.0-tf300t-4.2.blob)
4. Flash Latest CM (http://forum.xda-developers.com/showthread.php?t=2413878)
Personally, I would also make NvFlash Backups so you can restore your tablet just in case anything bad happens. Link is in my sig From what I'm reading, I can only do this after updating to 10.6.?.? So I would have to update to the latest Asus stock, then run this procedure.
Thanks again, and I appreciate your patience.
Click to expand...
Click to collapse
Ok, been reading until my eyes are bleeding.
From what I've read, Motochopper doesn't work for 10.6.1.27.x versions, so I would have to load 10.6.1.15.3. I should be able to download it and unzip it the first time on my pc. Then transfer it to the root directory of the tablet and run TWRP to install the .zip file. This would overwrite everything and bring it up to 4.2. I would then run the unlocker_v8 and install twrp for 4.2 using adb. If all that works, I should be rooted and unlocked and allowed to install CM 10 and above.
Please, anyone, check me on this. And thanks for the help.
kbud123 said:
Ok, been reading until my eyes are bleeding.
From what I've read, Motochopper doesn't work for 10.6.1.27.x versions, so I would have to load 10.6.1.15.3. I should be able to download it and unzip it the first time on my pc. Then transfer it to the root directory of the tablet and run TWRP to install the .zip file. This would overwrite everything and bring it up to 4.2. I would then run the unlocker_v8 and install twrp for 4.2 using adb. If all that works, I should be rooted and unlocked and allowed to install CM 10 and above.
Please, anyone, check me on this. And thanks for the help.
Click to expand...
Click to collapse
Oh sorry, I thought you meant that it had failed to unlock and flash.
Flashing a stock ROM will not relock your bootloader. Asus doesn't want people relocking their bootloader .
I'm not sure why you are using motochopper if you are going to install a custom ROM anyways. Almost all custom ROMs have the SU binaries in them.
Once you have unlocked your tablet, you will never need to run another unlocker, so dont worry about v8. The NvFlash backups need you to be on the 10.6.x.x bootloader, so you would flash the stock ROM then do the nvflash procedure.
cmendonc2 said:
Oh sorry, I thought you meant that it had failed to unlock and flash.
Flashing a stock ROM will not relock your bootloader. Asus doesn't want people relocking their bootloader .
I'm not sure why you are using motochopper if you are going to install a custom ROM anyways. Almost all custom ROMs have the SU binaries in them.
Once you have unlocked your tablet, you will never need to run another unlocker, so dont worry about v8. The NvFlash backups need you to be on the 10.6.x.x bootloader, so you would flash the stock ROM then do the nvflash procedure.
Click to expand...
Click to collapse
Just so I'm clear, I should be able to flash the stock rom w/ the TWRP I have now, using the install command for the zip file, right?
kbud123 said:
Just so I'm clear, I should be able to flash the stock rom w/ the TWRP I have now, using the install command for the zip file, right?
Click to expand...
Click to collapse
I'm not sure if you can flash the stock from the TWRP, to be safe I'd fastboot it from a computer. Once you flash the stock, it will upgrade the bootloader and erase TWRP. You would use the install command.
Success so far! I got it updated to 4.2.1 /10.6.1.27.5 using http://forum.xda-developers.com/showpost.php?p=35294881&postcount=1.
Related
Hi All,
After reading many threads onto how to get the latest OTA update on my Tablet, here are my final conclusion to get latest OTA update on your Tablet if you are already rooted\unlocked\running TWRP recovery.. [i have tried almost all other methods and they did not seem to work with me]
Here is what i have before starting:
1) Rooted
2) Unlcoked bootloader
3) TWRP recovery
Before starting this process, please backup your system and recovery via TWRP recovery..
FIrst, in order to get the update you will need to revert back to stock recovery.. there is a thread already on this subject in this forum, however, i did a different approach here....
1) download the OTA update for .26 from ASUS support page
2) extract the .zip file for the build and store it in your tablet [sdcard of external card]
3) reboot the tabled into TWRP recovery...
4) select install and browse for the extract file
5) install and reboot.
[this is a very easy process that does not require any terminal commands and worked like a charm]
at this point, your tablet will have stock ROM and stock recovery installed [ you will also lose root access] all your apps before this will remain installed, so, no worries about that...
After this point, you are ready to install .30 OTA update.. here is what i did..
1) Download the OTA update for .30 from ASUS support page
2) extract the .zip file for the build and store directly into the root folder of you tablet
3) reboot the tablet and start again into Android
4) You will get a notification that an Update is detected
5) select the update and proceed with it.
6) tablet will restart and install the update...
after 10 minutes, you are now running the latest OTA update..
you will need to re-root again and install TWRP if you don't want to use stock recovery...
i hope this helps...
Great write up!
I also updated using TWRP, but I used fewer steps. I started by downloading the .30 update from the ASUS site. Then I unziped it, and placed that file on my internal storage. I booted into TWRP, and flashed the file, powered off, powered on, and it booted. I waited while the camera firmware updated. I re-installed TWRP via fastboot, booted into recovery, and flashed SuperUser.
I am not seeing the .30 firmware on the Asus page, just .26 can anyone provide a mirror?
elislurry said:
I am not seeing the .30 firmware on the Asus page, just .26 can anyone provide a mirror?
Click to expand...
Click to collapse
Found this link on another topic, it has the update:
http://support.asus.com/Download.as...&m=ASUS Transformer Pad Infinity TF700T&os=32
Updating to .30 after pbrauer's ICS Stock US 9.4.5.26 with Root
I have rooted, unlocked, TWRP installed and pbrauer's ICS Stock US 9.4.5.26 with Root.
Can I now update to .30 dlpkgfile.zip without a problem since I am on a modified ROM?
whitedragon33 said:
Found this link on another topic, it has the update:
http://support.asus.com/Download.as...&m=ASUS Transformer Pad Infinity TF700T&os=32
Click to expand...
Click to collapse
Naw thats the page it was originally on but was pulled. I was asking if anyone could upload it.
pretty sure this method has been covered in at least one of the stickied threads.
Dropbox link to Firmware
https://www.dropbox.com/s/0x0qzpisxs6d92z/US_epad_user_9_4_5_30_20120907_UpdateLauncher.zip
JaceAlvejetti said:
Dropbox link to Firmware
https://www.dropbox.com/s/0x0qzpisxs6d92z/US_epad_user_9_4_5_30_20120907_UpdateLauncher.zip
Click to expand...
Click to collapse
after i update the new firmware . and flashed the twrp... not i cant root
wtf
any help??
madsatan said:
after i update the new firmware . and flashed the twrp... not i cant root
wtf
any help??
Click to expand...
Click to collapse
Download one of the ARM versions: http://androidsu.com/superuser/ and flash in TWRP.
Hey, just wanted to know if I can just install TWRP after updating to10.6.1.14.4 build (US). Deets:
1. Latest ASUS bootloader installed (never messed with it or other ROMs)
2. UnlockedDL
sbdags has some stuff on the stock ROM, but I haven't tweaked/deodexed anything, so I'm not sure it applies to my stock ROM? Can't I just download TWRP and fastboot install it? Tĥanks!
rivera151 said:
Hey, just wanted to know if I can just install TWRP after updating to10.6.1.14.4 build (US). Deets:
1. Latest ASUS bootloader installed (never messed with it or other ROMs)
2. UnlockedDL
sbdags has some stuff on the stock ROM, but I haven't tweaked/deodexed anything, so I'm not sure it applies to my stock ROM? Can't I just download TWRP and fastboot install it? Tĥanks!
Click to expand...
Click to collapse
Yes
rivera151 said:
Hey, just wanted to know if I can just install TWRP after updating to10.6.1.14.4 build (US). Deets:
1. Latest ASUS bootloader installed (never messed with it or other ROMs)
2. UnlockedDL
sbdags has some stuff on the stock ROM, but I haven't tweaked/deodexed anything, so I'm not sure it applies to my stock ROM? Can't I just download TWRP and fastboot install it? Tĥanks!
Click to expand...
Click to collapse
If your device already unlocked and you can be on 4.1.1 OR 4.2.1 (10.6.1.14.4 build), it's ok to install latest TWRP 2.5.0.0.
Thanks guys. I installed TWRP and I'm now rooted.
Okay, folks. I need some help. I was not able to flash new Cyanogen ROM's so I tried updating my TF300T to the latest US firmware. Here are the results and where I stand now.
1. TWRP 2.5 is loaded in recovery.
2. Latest ASUS firmware is installed.
3. Lost root.
4. Tried to re-root and cannot. SuperSU fails every time I try to update the binary.
5. I wipe everything and can boot into recovery.
6. I tell TWRP to flash the latest ASUS firmware zip file.
7. Firmware flashes but then when I go to reboot in TWRP it says that no OS is available!!
8. I can swipe the lock and reboot into 4.2.1 but obviously no root.
9. I have tried flashing the signed superuser file and it flashes and says successful.
10. When I use root checker pro to see if I have root it tells me that I do not have root.
What in the hell is going on????????? Any help or outline of steps would be appreciated.
bshpmark said:
Okay, folks. I need some help. I was not able to flash new Cyanogen ROM's so I tried updating my TF300T to the latest US firmware. Here are the results and where I stand now.
1. TWRP 2.5 is loaded in recovery.
2. Latest ASUS firmware is installed.
3. Lost root.
4. Tried to re-root and cannot. SuperSU fails every time I try to update the binary.
5. I wipe everything and can boot into recovery.
6. I tell TWRP to flash the latest ASUS firmware zip file.
7. Firmware flashes but then when I go to reboot in TWRP it says that no OS is available!!
8. I can swipe the lock and reboot into 4.2.1 but obviously no root.
9. I have tried flashing the signed superuser file and it flashes and says successful.
10. When I use root checker pro to see if I have root it tells me that I do not have root.
What in the hell is going on????????? Any help or outline of steps would be appreciated.
Click to expand...
Click to collapse
Bootloader info plz. Unless you were using the experimental CM10.1 build (or a select few others), it sounds like you tried to flash a ROM compatible only with an older bootloader onto the "latest" build (from your description).
OK, so I have a shield tablet that is running a rooted stock android version 5.1.1 and I want to update it too marshmallow and retain root. I have TWRP as my recovery. What's the easiest way to update? I found a thread for updating to marshmallow and it said it had the auto update file removed (which is good) but the downloadable files were removed from the thread by the OP... I should mention that this tablet is the newer recall replacement tablet that I'm trying to update, and that I still have the old recalled tablet with the auto update file removed so it never got killed. I'm not updating the old one though, just the new one.
You have to take care, not to overwrite the recovery partition. At least for the K1 there is an MM stock ROM on the official website. The version for linux simply contains partition images and a script, which fastboot flashes those. Commenting out the line which flashes the recovery would do the trick.
I'm not sure though if there is a similar ROM for the original.
Ah... no, with a locked bootloader it's slightly more complicated, since a 5.x twrp won't start on with a 6.0 staging blob.
Ok. Assume you've got the partition images. You have to (fastboot) flash everything but the blob and recovery first. Then boot into TWRP (the rom does not boot now) and flash your favorite SU tool. Then fastboot flash the blob. Now the rom should boot and give you root access. Finally update Twrp to 3.x.
njhuiz said:
You have to take care, not to overwrite the recovery partition. At least for the K1 there is an MM stock ROM on the official website. The version for linux simply contains partition images and a script, which fastboot flashes those. Commenting out the line which flashes the recovery would do the trick.
I'm not sure though if there is a similar ROM for the original.
Ah... no, with a locked bootloader it's slightly more complicated, since a 5.x twrp won't start on with a 6.0 staging blob.
Ok. Assume you've got the partition images. You have to (fastboot) flash everything but the blob and recovery first. Then boot into TWRP (the rom does not boot now) and flash your favorite SU tool. Then fastboot flash the blob. Now the rom should boot and give you root access. Finally update Twrp to 3.x.
Click to expand...
Click to collapse
Oh OK, thanks. I think I'll just wait. I'd rather flash a community stock/rooted rom. I don't want to flash an official ROM and have to re-root and flash recovery and all that... That's all just too much work right now just for marshmallow lol. My 5.1.1 is working fantastic so I'll just leave it for now. I'm curious why its so complicated now though with MM? I don't ever remember any previous build jumps requiring so much work to update to... My nexus 5 wasn't difficult at all. I just downloaded the full rom zip (MM Cataclysm cause I was on Lollipop Cataclysm), booted into TWRP, dirty flashed the zip, and it was good to go. I'm looking for THAT kind of update for my shield tablet.
If you unlock your bootloader (which is recomended for using custom roms), then getting root is simple, since you can fastboot flash any partition image.
Independend of your currently installed rom you can always get root by
1. (fastboot) flash the correct (2.7.x for Android 5.x, 3.x for Android 6.x) TWRP recovery
2. boot into TWRP an install a current SuperSU zip.
On the shield tablet you need to flash a new staging blob for MM in any case.
Been awhile
njhuiz said:
If you unlock your bootloader (which is recomended for using custom roms), then getting root is simple, since you can fastboot flash any partition image.
Independend of your currently installed rom you can always get root by
1. (fastboot) flash the correct (2.7.x for Android 5.x, 3.x for Android 6.x) TWRP recovery
2. boot into TWRP an install a current SuperSU zip.
On the shield tablet you need to flash a new staging blob for MM in any case.
Click to expand...
Click to collapse
I am attempting to update to marshmallow as well so i can install kali nethunter 3. but i am unfamiliar with rooting i havent done it since 2010. where would i acquire these files that i need to flash to the shield?
ASUS STOCK ROM ANDROID 8 OFFICIAL - ZENFONE 3 ZE552KL AND ZE520KL
Install TWRP Recovery 3.2.0 Or stock Recovery Oreo
Flash The Rom:
Direct Link Zenfone 3 ZE552KL
Direct Link Zenfone 3 ZE520KL
:laugh::laugh::laugh::laugh::laugh:
Is possible add root to original rom? I have last nougat whit root and trv recovery. Is possible flash rom oreo .zip whith root integrate.
No you need to flash it white stock recovery
@magicozero
Do you have the ze552kl or the ze520? I can try to do it for the ze552 since I have that model.
@Rasque
If you can flash with stock recovery, you can flash with twrp. It has been discussed many times, and I flashed Oreo with twrp so I am speaking from personal experience.
wang1chung said:
@magicozero
Do you have the ze552kl or the ze520? I can try to do it for the ze552 since I have that model.
@Rasque
If you can flash with stock recovery, you can flash with twrp. It has been discussed many times, and I flashed Oreo with twrp so I am speaking from personal experience.
Click to expand...
Click to collapse
Can u put room on this oreo rom for ze552kl to avoid unlock bootloader?
ehbm said:
Can u put room on this oreo rom for ze552kl to avoid unlock bootloader?
Click to expand...
Click to collapse
what do you mean by "put room"? If you don't want to unlock your boot loader, you can still flash the stock unmodified rom through stock recovery.
If you don't want to unlock, you can try booting (not flashing) twrp through fastboot and then flash magisk. I've never tried it so I'm not sure if it'll work.
this rom can be flashed by twrp???
mcyorian said:
this rom can be flashed by twrp???
Click to expand...
Click to collapse
No, just with the original recovery.
@kiq1702 @mcyorian
Yes, you can flash it with twrp. Edit the updater script, it works fine. I don't think I've ever used the stock recovery to flash anything, went straight to twrp and never looked back.
mcyorian said:
this rom can be flashed by twrp???
Click to expand...
Click to collapse
Yes, you can. No need to edit script or anything but before reboot you need to flash magisk or it wont boot.
You don't need any kind of recovery to install this update. Just download the rom file from asus website, put it in the main folder of your zenfone3 (remember the main folder, not the downloads. if you download the update from your phone it will directly go to downloads folder, so you have to move the update file to main folder) and in couple of seconds you will get a notification that says new update found. And it will update itself. You don't have to flash anything with any kind of recovery.
Only thing to pay attention is when you are downloading the update from official website which is HERE choose the World Wide (WW) version.
iceboy91 said:
You don't need any kind of recovery to install this update. Just download the rom file from asus website, put it in the main folder of your zenfone3 (remember the main folder, not the downloads. if you download the update from your phone it will directly go to downloads folder, so you have to move the update file to main folder) and in couple of seconds you will get a notification that says new update found. And it will update itself. You don't have to flash anything with any kind of recovery.
Only thing to pay attention is when you are downloading the update from official website which is HERE choose the World Wide (WW) version.
Click to expand...
Click to collapse
But my asis is rooted, unlocked bootloader and twrp Recovery ... it will be work by this method? ( put on main folder)
mcyorian said:
But my asis is rooted, unlocked bootloader and twrp Recovery ... it will be work by this method? ( put on main folder)
Click to expand...
Click to collapse
I believe not, but you can try, if it does not work flash with recovery.
mcyorian said:
But my asis is rooted, unlocked bootloader and twrp Recovery ... it will be work by this method? ( put on main folder)
Click to expand...
Click to collapse
My ZE552KL has unlocked bootloader and TWRP installed. I installed the latest official Oreo firmware with TWRP.
I tried with update way and TWRP way but dont install...
I have ROM on internal SDcard i tried both ROM see in image, but the message is the same...
Skytrotter said:
I tried with update way and TWRP way but dont install...
I have ROM on internal SDcard i tried both ROM see in image, but the message is the same...
Click to expand...
Click to collapse
You have to edit the update script otherwise it won't work.
Remove the first 6 lines, save and replace it...
stark_br said:
You have to edit the update script otherwise it won't work.
Remove the first 6 lines, save and replace it...
Click to expand...
Click to collapse
Can i install the latest oreo even without latest nougat using twrp? Or is it recommend to install latest nougat before proceeding with oreo, but I think i can install it without on latest nougat so plss enlighten me
stark_br said:
You have to edit the update script otherwise it won't work.
Remove the first 6 lines, save and replace it...
Click to expand...
Click to collapse
no i dont edit, and i dont know how to edit, where i can found the way for edit?
Skytrotter said:
I tried with update way and TWRP way but dont install...
I have ROM on internal SDcard i tried both ROM see in image, but the message is the same...
Click to expand...
Click to collapse
Which twrp did you use?
[email protected]@ said:
Which twrp did you use?
Click to expand...
Click to collapse
3.0.2-0