Ever since I decided to flash a stock Rom and not use Carbon Rom, after using carbon as my daily driver for months, I barely have a network(may be a coincidence). It kills my battery also. At home I never have service unless I'm down the block outside I have LTE and its fine. I have the latest radio btw. It seems like it started when I started using Franco kernel, but its probably a coincidence bc what does that have to do with my network...any insight is appreciated. Thanks.
Factory reset? Change radio? Flash stock kernel?
Sent from my Nexus 5 using Tapatalk
rootSU said:
Factory reset? Change radio? Flash stock kernel?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Change radio? Shouldn't I use the latest radio? Guess I'll factory reset and try stock kernel in a few min
You should use whichever radio works best for you. If you've changed radio and now your signal is worse, you don't need to be a genius to realise the first thing to try is the radio you were on before the problem started
Sent from my Nexus 5 using Tapatalk
rootSU said:
You should use whichever radio works best for you. If you've changed radio and now your signal is worse, you don't need to be a genius to realise the first thing to try is the radio you were on before the problem started
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Sry to annoy you, but I flashed the November radio build. The radio I had when I bought the N5 and its working great now. I didn't factory reset, I just wiped cache and flashed it.
Good stuff. Radio is always first step if you changed it.
Sent from my Nexus 5 using Tapatalk
Related
Hi to all,
I have a ramdom problem with my Nexus S. Sometimes, when I try to make a call, the phone seems to work well but the call fails. The screen remains as if trying to establish the call but this is not done.
I think that the problem is only to make calls but I can receive it without problems.
When the error ocurs, is needed to stop the data conection (eg APNDroid) and then the Nexus works again... till the next error. I have this problem the 30% of the times (more or less).
I asked in spanish forums and a lot of people has the same problem.
Is this a known bug?... and the solution?.
I have the low signal problem too?.
I'm sorry to say that bus this is my 3rd Android phone (the first official google) and is the worst that I never had!!!.
Please, help!!!!
I had the same problem too....
Any help?
rockerblood said:
I had the same problem too....
Any help?
Click to expand...
Click to collapse
Hi,
Are you stock or rooted?
If rooted, what ROM?
When did the problem start?
When was the last time you updated your PRL or your phone profile?
The more info the better everyone on these forums can help.
Good luck
Vs Nexus S4G using tapatalk2
you should up rom to fix it or install new PHONE software :laugh:
im rooted, its been happening sunce i use PACman rom.
i used almost all custom rom hellybean, jeLLyshot, PA.
i always do a full wipe before using new custom rom.
im on jellyshot and the problem occurs still, but if i reboot then try to call again it works then after a while it happen again.
Sent from my Nexus S using Tapatalk 2
rockerblood said:
im rooted, its been happening sunce i use PACman rom.
i used almost all custom rom hellybean, jeLLyshot, PA.
i always do a full wipe before using new custom rom.
im on jellyshot and the problem occurs still, but if i reboot then try to call again it works then after a while it happen again.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Well ID first update profile & PRL. Im not sure which ROM has that option. Some do some don't. Just go to settings/about phone and tap the tab that gives the option.
If not then flash back to ur original ROM if u have it to do the above.
If that doesn't work maybe try to see if its an app that is causing it. Just flash a ROM but do not add anything to it. Make the calls to check it.
I'm on Slimbean and I have no issues if u want to try that ROM.
Good luck
Vs Nexus S4G using tapatalk2
I'm having an issue changing ROMs. I was originally a CM user, but I've been running Evervolv for the last few months. I decided to flash CM again yesterday. Everything seemed to work fine for a bit, until I turned off the wifi and realized I wasn't getting a 3G signal.
I tried rebooting, reflashing, messing with the settings for quite awhile and nothing seemed to help. Eventually I decided to wipe again and flash a Sense ROM. I STILL could not get a 3G signal. After much experimenting I wiped again and flashed Evervolv back onto the phone. Much to my dismay, no 3G.
Finally I restored my nandroid backup I made before I loaded CM and surprisingly everything works just fine again and the 3G is back to normal. Any ideas what I am doing wrong? I'm not a noob at flashing ROMs, I've had a few different ones on the Shift and tried many on the Hero before that, but I must be making a silly mistake somewhere.
If anyone has any ideas or can point me in the right direction I'd really appreciate it, thanks!
Unsure but evervovle had messed up my phone to when I first got my phone, i had to RUU just to reset... So I'm gonna say unless someone else offers a viable option, hit the 2.2 RUU
Sent from my PG06100 using xda premium
Thanks thronnos. If no one else seems to know the cause of this I'll give that a shot.
You said you nand back and now 3G is working.. So if you flash a fresh ROM now does 3G continue working or only while using the nand??
I tried to flash another ROM this morning, 3G still didn't work. Had to nand back again to get it to work.
ajs2677 said:
I tried to flash another ROM this morning, 3G still didn't work. Had to nand back again to get it to work.
Click to expand...
Click to collapse
I think your best option would be to run the ruu.
What recovery you using?
Sent from my PG06100 using Tapatalk
I'm using ClockworkMod Recovery.
What version? Check your pm's...
Sent from my PG06100 using Tapatalk
drob311 said:
What version? Check your pm's...
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Ah, the old recovery... That will get you everytime
Sent from Gingerbread Speedy 4G
Thanks for your help guys, everything's working great again!
For anyone else who runs across this problem, going back to the RUU and rerooting your phone WILL fix this issue.
The ruu is a great tool to have. Glad you got it worked out
Sent from Gingerbread Speedy 4G
Good deal... Good to see you got it running.
Sent from my PG06100 using Tapatalk
I have an issue when I flash any Aosp rom. After initial install I have strong 4G but if I reboot phone for any reason I lose all data. My imei is there and phone number is there. I'm wondering if I'm doing something wrong.
Sent from my SCH-I535 using Tapatalk 2
sounds like your on the fringe of strong lte coverage...the latest ril commits were suppose to help this. might try the latest pa or aokp build.
I'm on liquid rc5 right now and data is excellent. I haven't tried a reboot though. I'm wondering if it might make a difference if I reboot through recovery. Just a thought, maybe I'm just grabbing at straws, but this issue makes roms like paranoid kinda useless. Thanks for the reply.
Sent from my SCH-I535 using Tapatalk 2
ryan1977 said:
I'm on liquid rc5 right now and data is excellent. I haven't tried a reboot though. I'm wondering if it might make a difference if I reboot through recovery. Just a thought, maybe I'm just grabbing at straws, but this issue makes roms like paranoid kinda useless. Thanks for the reply.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
i have been using paranoid since 2.13 and its been flawless when im in strong lte...never rebooted and lost data. if you toggle airplane mode on/off it wont come back?
Not sure, but I've never tried. I'm kinda new to this as this is my first rooted device, and im kinda learning as I go. I was on beans 13, then 14, but i can't resist trying out all these jb builds. I will give the airplane mode toggle a try. Thanks
Sent from my SCH-I535 using Tapatalk 2
Sent from my SCH-I535 using Tapatalk 2
Well I tried the airplane toggle and it doesn't bring it back, anyone wit suggestions please let me know, I really want to be able to run Pa 2.20, but if I can't switch to phablet or another ui its kinda useless.
Sent from my SCH-I535 using Tapatalk 2
ryan1977 said:
Well I tried the airplane toggle and it doesn't bring it back, anyone wit suggestions please let me know, I really want to be able to run Pa 2.20, but if I can't switch to phablet or another ui its kinda useless.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I have the same issue with the new builds of JB ROMs. I do a clean wipe of everything and I flash the ROM, but when it boots in the beginning, I can sign into my gmail with data (even when I'm connected) and I have to use WiFi. Then when everything boots, I have no data and still connected to data (showing 3g) I do a reboot and it works for awhile and it goes out again. So I just went back to Beans14
Sent from my SCH-I535 using xda premium
I'm on liquid rc5 right now and everything seems to be working. But if I were to reboot my phone will not connect to data. The 4G icon pops up but never turns blue, and if I try Google Now or something else that requires a data it says no Internet connection. I have to be doing something wrong.?
Sent from my SCH-I535 using Tapatalk 2
Maybe shut the phone off, remove sim card, and turn on without the sim card then shut phone off and put sim card back and turn phone back on. That might help.
Sent from my SCH-I535 using xda app-developers app
Thanks for the reply, has this procedure worked for you in the past.?
Sent from my SCH-I535 using Tapatalk 2
It has worked for me on 2 GS3's. I was on stock TW though, I don't know if that'll make a difference.. it has something to do with updating your PRL or something like that, I can't really remember exactly what it updates. But it did work for me, it actually gave me better service.
Sent by one of my many Anthromorphic Personifications
Yes it has the other day after flashing liquid I was only getting 4g did that and it worked.
Sent from my SCH-I535 using xda app-developers app
Ok cool ill give it a shot. I'm really hoping that it works. Because some of these pa builds are really nice, and I'd probably use liquid rc5 as a daily if I could reboot my phone and have a data come to back.
Sent from my SCH-I535 using Tapatalk 2
Hey man thanks. That actually worked, I'm not sure if my service is better but it came back after I shut down and did that procedure. I appreciate the help. I might actually be able to run one of those pa. Builds now.
Sent from my SCH-I535 using Tapatalk 2
i tried the same method as well too, but it didnt work for me. i dont know whats wrong, i think its just my phone because when i flash any AOSP rom, it doesnt connect to data after reboot. i do 3x wipes and what not but still nothing, my IMEI and phone number is all there so i dont know what it is. anyone have a idea??
Kernel download:
http://faux.romhost.me/htc_m8wl/kk44/
Change log:
http://faux.romhost.me/htc_m8wl/kk44/changelog.txt
Source:
https://github.com/faux123/htc_m8
Check the unified thread here for discussions and questions:
http://forum.xda-developers.com/showthread.php?t=2712044
Enjoy!
reesrved 1 just in case
Would love to have a faux kernel for this! Faux was always good for battery life..
Sent from my HTC6525LVW using xda app-developers app
Nice thanks
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Flashed your VZW kernel and booted and working great so far thanks!
Sent from my HTC6525LVW using Tapatalk
Glad I made a good choice and bought the m8. Missing your work man. Samsung is kinda lonely and quiet lately..
Flashing can't wait
Sent from my HTC6525LVW using Tapatalk
---------- Post added at 03:37 AM ---------- Previous post was at 03:30 AM ----------
Installed and butta smooth.
Sent from my HTC6525LVW using Tapatalk
Backed up my boot partition and flashed this. It felt noticeably slower after a few minutes so I restored my boot partition. Now my wifi will no longer turn on. How do I correct the issue? wifi will work when I reinstall but If I try to go back to the stock kernel it no longer will. This kernel is WAY slower than the stock kernel.
ocman40 said:
Backed up my boot partition and flashed this. It felt noticeably slower after a few minutes so I restored my boot partition. Now my wifi will no longer turn on. How do I correct the issue? wifi will work when I reinstall but If I try to go back to the stock kernel it no longer will. This kernel is WAY slower than the stock kernel.
Click to expand...
Click to collapse
if you don't have wifi, download again. there was a 5 min window where an older version was with broken wifi was live
Anyone else having trouble reading their sdcard with this kernel?
Sent from my Nexus 7 using Tapatalk
faux123 said:
if you don't have wifi, download again. there was a 5 min window where an older version was with broken wifi was live
Click to expand...
Click to collapse
I have WIFI with your kernel but its SLOW and laggy as heck. When I got back to my stock kernel WIFI will not turn on. Can you post steps to restore the stock modules please.
ocman40 said:
I have WIFI with your kernel but its SLOW and laggy as heck. When I got back to my stock kernel WIFI will not turn on. Can you post steps to restore the stock modules please.
Click to expand...
Click to collapse
reflash your ROM or nandroid backup.
faux123 said:
reflash your ROM or nandroid backup.
Click to expand...
Click to collapse
a reflash of the nandroid boot partition did not work. Still no WIFI. However if I reflash your kernel wifi returns. What modules are being deleted?
Running smooth as silk over here! Does the faux app work on this phone and if so what are the recommended settings that you use please?
Really nobody else with sdcard issues? My 64gb card won't mount. Was working fine before installing kernel
Sent from my Nexus 7 using Tapatalk
Something is definitely up. Phone seems lagier and using Linpack I now get the same and lower results for Single Thread and Multi Thread. It's as if the other cores aren't being enabled.
Sent from my S-Off VZW HTC One M8
My phone runs pretty smooth I have noticed though that the default clock speed is at 1ghz I believe that may be the reason why people are noticing lag ?
Also my WiFi speeds are normal.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
ickedmel said:
My phone runs pretty smooth I have noticed though that the default clock speed is at 1ghz I believe that may be the reason why people are noticing lag ?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I noticed that to 1036. I had to reflash my rom since it broke WIFI.
I noticed before I installed faux kernel app the the kernel is set to max cpu speed at only 1000,as soon as I raised it to stock speed it was working perfectly
Sent from my HTC M8, Verizon style.
Sooooo... Does this include fauxsound?
bawksybrown said:
Sooooo... Does this include fauxsound?
Click to expand...
Click to collapse
fauxsound coding is actually done in my private build, but HTC did something non-standard and is conflicting with fauxsound kernel drivers.. that's why i didn't release it yet.. need to troubleshoot and see what HTC has done to the standard sound driver from Qualcomm...
HTC always do something different from everyone else including the reference design from Qualcomm.... Sometimes they OVER engineered...
Hey all. My current setup is the Latest PA 4.43. Franco R57. Baseband M897A-2.050.1.16. I'm constantly getting dropped calls and I'm not sure where to go from here. I've already tried updating PRL and updating profile. Should I try an older radio? Flash diff kernel?
Sent from my Nexus 5 using XDA Premium 4 mobile app
toprock23 said:
Hey all. My current setup is the Latest PA 4.43. Franco R57. Baseband M897A-2.050.1.16. I'm constantly getting dropped calls and I'm not sure where to go from here. I've already tried updating PRL and updating profile. Should I try an older radio? Flash diff kernel?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
maybe its just your area? all areas cant be 100% great, there are areas with a bad/terrible signal:angel:. but trying other things wont hurt. if youre undervolting, it can affect it.
would a kernel affect calls in anyway? i just flashed stock 4.4.4 and r57 franco and cant make any calls and my bars drop to 0 when i try to. hmmm