Database Info

How to unbrick the soft bricked Captivate

NOTE:
So far this has been the only sure fire method I've found to 100% get around any brick situation regardless of firmware, etc. This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Please forgive me if this is duplicate some where, but I tried every procedure I could find on google to no avail, then accidentally found this method just before I was going to box it back up and see if my buddy at AT&T would make me eat it or not.
My situation was: Launched Odin3 to flash H3 firmware, died twice in the middle, and on the third time locked up half ways just at the beginning of factoryfs.rfs -- Then the phone did nothing. Blackscreen is all. Interestingly enough, while in the state if you hold volume up + power, it will give a hw diagnostic screen. Beyond that I could get no where. Just a black screen, no acknowledgement when connected to PC, no charging indicator, nothing.
If this is a dupe Im sorry but this method I could not find and hope to make it readily available to people who may think their phones bricked.
Update 12/22/2010:
How to BRICK the phone / WARNING!!!
If for whatever reason you decide to use Odin to flash a stock GTI9000 ROM and manually add the kernels and modems using a "pure" 2.2.1 sammy rom. BEWARE.
Researching a lot, it seems the consensus is that the sbl in the 2.2.1 versions of the GTI9000 has *hard* download mode crippled.. Meaning if there is a software screw up YOU CANNOT USE A USB JIG OR ANY OTHER METHOD OF GETTING THE PHONE IN DOWNLOAD MODE!!! To fix it you'll need a new one or JTAG to replace the bootloader.
As far as I can tell, beyond getting completely rid of the AT&T logo, there is no need to flash boot/sbl to get the "purity" of the 2.2.1 sammy roms.
Extract all files from the tar EXCEPT boot/sbl and re-tar and flash just those to avoid overwriting the stock captivate boot loader.
Also, it does not appear the boot/sbl from the captivate 2.2 leak suffers this same problem.
For any one iffy on bricking their phones, stay away from roms that remove COMPLETELY the AT&T logo on boot. This generally means the boot loader has been messed with any you may be screwed if you soft brick the phone. Most CWM roms dont overwrite the boot/sbl, but some can and do. Watch yourself.. if it the AT&T logo goes away COMPLETELY, I recommend flashing JF6 with One click while the roms alive using adb reboot download and try another rom.

thanks!
worked...took a few tries but some trick with this captivate to get it into download mode.. i was totally bricked too, diag screen with PC/Phone icons and exclamation mark. for me 1.) plug usb, 2.) hold power and vol up/down and connect battery (it fell out) and i was in download mode

I guess a similar procedure was on the odin3 one click thread, but there is something different in your procedure, it's not my case but it would be nice if some people confirms this as this may be useful and if it really works it should be included in odin thread

What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.

mine is dead
mi samsung captivate was working great but, suddenly it go black and only the touch bottom have light, when i plug it in the a/c it show is charging. i'm mac user and a read that i ned to use odin3 but it not work on mac. how i can unbrick the phone???
is rooted with one click lag
the dbdata was modif to
thats all
HEEEEELLLLLPPPPPP

Odin will not open on the mac?
Cant you use a virtual machine and use Odin on a Mac that way?
Or else take the odin 3 single click for JF6 and use on a friends Windows Computer.

Please help - unable to flash back with Odin3
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!

TechNut* said:
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
Click to expand...
Click to collapse
Best way to get download mode is use adb and type adb reboot download.
Or follow the volume up/down held with odin open on the computer, then you plug in the usb cable to the computer.

askpcguy said:
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
Click to expand...
Click to collapse
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head

mattbeau said:
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
Click to expand...
Click to collapse
Just sharing the info! Makes you think twice about trying something else don't it?

does not seem to work because as soon as my battery touches the contacts it goes to the diag screen. do I have to release the power button in super human speed times there?
looked at all threads here, looked elsewhere -- there are some that are not fixable. Wanted to add that in case others come here and think that they might be the only ones that can't get it to work.
Ended up sending mine off to Samsung to reset today. :/

I love you! I called AT&T to send me documentation to sign and it was going to cost me 125 dollars to get it replaced even with warranty. And you fixed it !

i have tried just about every single method detailed in these forums, and nothing works.
Trying what OP suggested just sends me to the battery charging animation screen.
Anybody have any ideas ?

file analysis
I keep can get to the download screen and I hit start and it does the same thing everytime it just does File analysis i cant figure what i am doing wrong here somebody please help me

I think the issue was it had something to do with 64 bit windows 7 i just re did the stock rom one click solution and it worked fine

thekurrgan said:
NOTE:
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Click to expand...
Click to collapse
Thank you for sharing your experience.
I don't have a Captivate yet but am doing research on it and hopeful of getting one. I am confused about one thing.
Every where that I have read about how to enter Recovery mode or Download mode on the Captivate using the 3 button method, it says holding down both Volume UP + Volume Down (plus Power button) will enter Recovery mode. But you say it enters Download mode which is confusing to me. As I recall, to enter Download mode you must press the Vol Down only (plus Power button). Could it be because the phone won't go into Recovery mode, it goes into Download mode instead? Am I missing something?
Thank you!

Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesnt work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.

askpcguy said:
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesn't work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
Click to expand...
Click to collapse
Thank you askpcguy! I understand the difference between Download and Recovery modes.
So the procedural difference here is having the battery in + Power button, versus battery not in (use USB cable instead) and no Power button. Can the phone get power from the PC via the USB cable? This seems to differ from what the original poster said about download mode. Perhaps OP could edit his original post for clarification? Or am I still missing something? Thanks to all

The phone does get power from the USB cable.
The difference is one procedure uses the USB cable (download mode) and the other does not (Recovery mode).
The volume up+down method does not use the power button, the phone is powered on into download mode once you plug in the USB cable.
We say pull the battery to get the phone powered off. If a firmware flash stalled or doesn't complete, pull the battery and try again!

I now understand the precedural difference.
Thank you askpcguy!

unbrick samsung galaxy s vibrant.

i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.

I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.

djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.

cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either

Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen

philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.

huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either

So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen

I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.

i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck

fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.

no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?

I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.

I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.

hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (

after i have gone to download mode. my computer cannot recognize my device. help me please.

to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them

[Q] HELP! I think I bricked my Sidekick 4g

I recently started looking into rooting my phone and was trying to use Odin to flash Clockwork Recovery mod into my Sidekick 4g. In the middle of downloading the program shut down. I unpluged the phone from the computer and got a black screen with an image of phone+!+computer. So i rebooted into download mode, opened odin, and plugged the phone into the computer. Clicked start and it reset. Then it went into a reboot loop, alternating between the boot up logo and a white screen with 2 blue lines. I thought i could reset it again with odin so i did, and now i have a black screen that only has the back light on if i press the power key or plug it in the computer via usb. Now odin wont even recognize my device. Neither would adb devices. If i hold volume down and power key for a few seconds the back light flashes on and off once then completely off. Can anyone please Help?

kcheung331 said:
I recently started looking into rooting my phone and was trying to use Odin to flash Clockwork Recovery mod into my Sidekick 4g. In the middle of downloading the program shut down. I unpluged the phone from the computer and got a black screen with an image of phone+!+computer. So i rebooted into download mode, opened odin, and plugged the phone into the computer. Clicked start and it reset. Then it went into a reboot loop, alternating between the boot up logo and a white screen with 2 blue lines. I thought i could reset it again with odin so i did, and now i have a black screen that only has the back light on if i press the power key or plug it in the computer via usb. Now odin wont even recognize my device. Neither would adb devices. If i hold volume down and power key for a few seconds the back light flashes on and off once then completely off. Can anyone please Help?
Click to expand...
Click to collapse
it sounds like there is a chance your device is bricked beyond repair i did that to mine by flashing the wrong stuff with Odin, and i had no choice but to get a new one. all i could get was a slight backlighting when pressing buttons, no DL mode, no boot logo, nothing.
btw, Odin isn't used to root the phone or to install Clockwork Recovery(at least as far as i know). Odin is a tool to use if something goes wrong somewhere and you need to restore your phone from a soft brick.
also, just so you know, this post should go in the General section of this forum.

try an alternate way to go into download mode:
take the battery out
connect the phone via usb to the computer
while pressing vol down + power + trackpad insert the battery
try it a couple of times, if it doesn't work, sorry

tweeklulz said:
try an alternate way to go into download mode:
take the battery out
connect the phone via usb to the computer
while pressing vol down + power + trackpad insert the battery
try it a couple of times, if it doesn't work, sorry
Click to expand...
Click to collapse
I vouch for the effectiveness of this method of getting into recovery. Saved me last night
Also if you can get it into download mode you can most likely recover it. Follow the instructions below:
http://forum.xda-developers.com/showthread.php?t=1088413

I think this goes in the general section bro.

had VERY similar issues 2x.
I had to repartition with Odin, then drop the image.
The image drop didn't work, but after I reparted, (repart failed at the end, but it was good enough to redrop the image, after restarting the whole thing over again) all was good.

Just odin in that screen it will work pull the battery and plug ur phone in connected to the computer and odin regular its not brick I had this happen to me twice and twice I odined back to stock. Make sure all three boxes are checked
Sent From My Rooted Sidekick 4g XDA Premium App

Thanks, I ened up getting the phone replaced

NET TIME U KNOE
Sent From My Rooted Sidekick 4g XDA Premium App

Datlilboricua said:
Just odin in that screen it will work pull the battery and plug ur phone in connected to the computer and odin regular its not brick I had this happen to me twice and twice I odined back to stock. Make sure all three boxes are checked
Sent From My Rooted Sidekick 4g XDA Premium App
Click to expand...
Click to collapse
DarksteelBlade said:
I vouch for the effectiveness of this method of getting into recovery. Saved me last night
Also if you can get it into download mode you can most likely recover it. Follow the instructions below:
http://forum.xda-developers.com/showthread.php?t=1088413
Click to expand...
Click to collapse
My phone also showed the "phone - ! - PC" icon so I thought it was done for as well. Between these two threads, specifically tweeklulz post above, I was able to recover my phone!
Prior to starting the ODIN process,power on your Sidekick to that wretched brick screen. From there plug your phone to your phone via USB then immediately remove the battery. That horrible brick screen will still be there, but just run the ODIN process anyway.
Thank you all for your input! This saved my phone and I am a 9million% NOOB to developing and mods. LOL

kcheung331 said:
Thanks, I ened up getting the phone replaced
Click to expand...
Click to collapse
im having the same issue now, guess ill go replace the phone too..
i tried odin, and once i click start, the phone doesnt even show download mode anymore, and it wont boot.
When i press power, dimmed lights come up on the background and when i connect it with usb, same thing..

Look back at the Odin threads again. I doubt your phone is (permanently) bricked.
Sent from my SGH-T839 using XDA App

heart attack
THANKS DOOD almost had a heart attack.
Datlilboricua said:
Just odin in that screen it will work pull the battery and plug ur phone in connected to the computer and odin regular its not brick I had this happen to me twice and twice I odined back to stock. Make sure all three boxes are checked
Sent From My Rooted Sidekick 4g XDA Premium App
Click to expand...
Click to collapse

We do have UnBrickable Mod on this device now. You just remove a resistor, create a bridge and then use the Ultimate UnBrickable Resurrector to upload Download Mode to the device any time you want.. It takes a bit of skill, but hey.. Nothing to have a heart attack about.

kcheung331 said:
I recently started looking into rooting my phone and was trying to use Odin to flash Clockwork Recovery mod into my Sidekick 4g. In the middle of downloading the program shut down. I unpluged the phone from the computer and got a black screen with an image of phone+!+computer. So i rebooted into download mode, opened odin, and plugged the phone into the computer. Clicked start and it reset. Then it went into a reboot loop, alternating between the boot up logo and a white screen with 2 blue lines. I thought i could reset it again with odin so i did, and now i have a black screen that only has the back light on if i press the power key or plug it in the computer via usb. Now odin wont even recognize my device. Neither would adb devices. If i hold volume down and power key for a few seconds the back light flashes on and off once then completely off. Can anyone please Help?
Click to expand...
Click to collapse
I jus got my sidekick 4g for my birthday and rooted it. Tried installing Smooth Maximus X and softbricked my phone. I get the lady telling me something about the software invalid or something. Yes I am a noob and i am trying to Odin my phone back to stock but the links for the Odexed arent working properly. So I need major help as i dont want to lose my phone and i would really love to be able to use the softwares u guys have provided. CAN YOU PLEASE HELP ME!!!!

The KD1 odin links work

Phone will not boot past recovery. Please help, major panic!!

Oh dear.....I hope I haven't destroyed my O3D....
I was attempting to install the V10D update, so used the backup I took right after rooting and installing ROM Manager to restore the phone to its status before installing the performance pack. If I tried installing the update OTA before this I just got an invalid package error.
So the restore went well and it rebooted fine. So I ran the update again, and it downloaded and appeared to install, but when the phone rebooted it just booted straight into the recovery. I tried to get it to reboot again, but again it just booted back into recovery.
Ok, nothing to worry about I thought, I just ran the restore again with the same restore point as before....but after it finished it's still booting back up into the recovery!!! No matter what I do the phone just seems to keep booting into the recovery menu. I've tried booting into emergency mode by powering the phone off, then holding the UP Volume key and holding power, but it doesn't seem to work.
Can anyone help? Please?
Lil update -
When powering off the phone and then connecting it to the USB cable, it automatically boots into recovery mode without me even touching the power button. At this point the LG Mobile Update detects the phone and advises me that there's an update available. I try to apply this, but after entering the SN and IMEI, it just gives me a message "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". I get the same error if I use the recovery Phone option. This always happens at the download stage, so is it possible that it's just failing to download the update from LG rather than actually do anything with the phone?
Please don't tell me I've ruined my brand new phone!!

Unfortunatly, you've managed to do the same as I have... leave the phone for e a few days and wait for a rom that you can install via clockwork recovery, you'll have your phone up and running again. Dont do as I did and wipe the recovery from the phone, it will result in a total brick (or at least a brick till LG releaase a full rom update (could be months yet...).

Oh man, I'm panicking so much that I might have ruined the phone now.....

read this thread for more info... http://forum.xda-developers.com/showthread.php?p=15762389#post15762389

madshaun1984 said:
read this thread for more info... http://forum.xda-developers.com/showthread.php?p=15762389#post15762389
Click to expand...
Click to collapse
I'm not sure what I'm looking for there, I've looked through that thread but it doesn't seem relevant to the problem I'm having.

I have the same problem, if you put it into emergency mode you can update to 10d but then its even worse then you are stuck in the firmware update screen
tomorrow I leave on holiday and was planning for nice 3d pictures and movies but I am screwed...

Lagamorph said:
Oh dear.....I hope I haven't destroyed my O3D....
I was attempting to install the V10D update, so used the backup I took right after rooting and installing ROM Manager to restore the phone to its status before installing the performance pack. If I tried installing the update OTA before this I just got an invalid package error.
So the restore went well and it rebooted fine. So I ran the update again, and it downloaded and appeared to install, but when the phone rebooted it just booted straight into the recovery. I tried to get it to reboot again, but again it just booted back into recovery.
Ok, nothing to worry about I thought, I just ran the restore again with the same restore point as before....but after it finished it's still booting back up into the recovery!!! No matter what I do the phone just seems to keep booting into the recovery menu. I've tried booting into emergency mode by powering the phone off, then holding the UP Volume key and holding power, but it doesn't seem to work.
Can anyone help? Please?
Lil update -
When powering off the phone and then connecting it to the USB cable, it automatically boots into recovery mode without me even touching the power button. At this point the LG Mobile Update detects the phone and advises me that there's an update available. I try to apply this, but after entering the SN and IMEI, it just gives me a message "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". I get the same error if I use the recovery Phone option. This always happens at the download stage, so is it possible that it's just failing to download the update from LG rather than actually do anything with the phone?
Please don't tell me I've ruined my brand new phone!!
Click to expand...
Click to collapse
Don't panic, I managed to totally brick my phone today and LG told me to send it back for DOA but I managed to recover it in the end.
My phone wouldn't show anything on the screen, it remained black so I can say your position sounds much better than mine.
What you will need:
USB Drivers - Download from here (Check note)
LG Mobile Support Tool (LGMST) - Download from here
Before you start: Disconnect the phone from the computer and totally remove the battery.
So here we go:
!!!REMOVE ALL THE LG USB DRIVERS FROM THE SYSTEM BEFORE YOU CONTINUE!!! Go to add remove programs, select the LG United entry and then uninstall it.
First install the USB Driver from the link above and wait until it has finished with the setup.
Then run the LGMST. When it starts and it says "Disconnected." then put the battery back to the phone and connect the phone to the computer.
Press ONLY the Power button and wait until something happens. If you see that the phones boots and the LGMST starts it by itself then wait till it stops with all the information gathering stuff.
Then regardless of what the program says of you having an update or not, DON'T START THAT UPDATE!
Click on alt on the keyboard and the from the menus at the top select Customer and then emergency(the last option).
Type in the phones IMEI (located at the box of the phone or on a sticker under the battery) without dashes, just numbers.
Finally click on Check and follow the instructions on the screen.
You should be ready as new after 10-15 minutes with the standard V10B firmware and you should not even lose data.
Tell me if that helped so if it didn't we can still fix it I'm sure
Note: I'm aware that 3.3.0 is the latest USB driver that it ships with the phone but for some reason I had only success to flash the phone using the older 3.2.1

That does not work for our problem, just a blank screen is better than stuck in firmware update mode :s

m33ts4k0z said:
Don't panic, I managed to totally brick my phone today and LG told me to send it back for DOA but I managed to recover it in the end.
My phone wouldn't show anything on the screen, it remained black so I can say your position sounds much better than mine.
What you will need:
USB Drivers - Download from here (Check note)
LG Mobile Support Tool (LGMST) - Download from here
Before you start: Disconnect the phone from the computer and totally remove the battery.
So here we go:
!!!REMOVE ALL THE LG USB DRIVERS FROM THE SYSTEM BEFORE YOU CONTINUE!!! Go to add remove programs, select the LG United entry and then uninstall it.
First install the USB Driver from the link above and wait until it has finished with the setup.
Then run the LGMST. When it starts and it says "Disconnected." then put the battery back to the phone and connect the phone to the computer.
Press ONLY the Power button and wait until something happens. If you see that the phones boots and the LGMST starts it by itself then wait till it stops with all the information gathering stuff.
Then regardless of what the program says of you having an update or not, DON'T START THAT UPDATE!
Click on alt on the keyboard and the from the menus at the top select Customer and then emergency(the last option).
Type in the phones IMEI (located at the box of the phone or on a sticker under the battery) without dashes, just numbers.
Finally click on Check and follow the instructions on the screen.
You should be ready as new after 10-15 minutes with the standard V10B firmware and you should not even lose data.
Tell me if that helped so if it didn't we can still fix it I'm sure
Note: I'm aware that 3.3.0 is the latest USB driver that it ships with the phone but for some reason I had only success to flash the phone using the older 3.2.1
Click to expand...
Click to collapse
I'm afraid that didn't work (I think I'm gonna cry soon)
When I go to the Customer Support option, the last option isn't called Emergency it's called "Recovery Phone" and seems to launch exactly the same thing as it does if I click the big "Start Updating" button. There is no option named Emergency at all. Does that mean my phone isn't/wont/can't boot into Emergency mode?
I don't even hold down the power button for my phone to switch on, the second I insert the battery it boots into Clockwork Recovery. If I power off the phone and connect the USB, I don't get the battery charging animation or anything, the screen just remains completely blank. Then if I press the power button (alone or with anything else) it just boots to Clockwork recovery.
The LG Mobile Support Tool seems to detect the phone in this state, but as I said, when it tries to do the download, I just get an error saying "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". The version of the Mobile Support Tool that it's installing is 1.5.1.8 after downloading from your provided link, just incase you need to know that. It seems the tool automatically updates itself on every launch.
Someone also seems to have posted the actual ROM in this thread, http://forum.xda-developers.com/showthread.php?t=1155874 would installing this perhaps assist? Is it even possible to install this when my phone wont boot up past the recovery manager? If it is possible can someone perhaps advise me how?

__________

P_U_A_John said:
Try the following thread http://forum.xda-developers.com/showthread.php?p=15782541#post15782541
Click to expand...
Click to collapse
Unfortunately the phone wont boot into Emergency mode. The clockwork Recovery mod seems to have taken over all of the boot options. If I hold the volume up key and press the power button, nothing happens. If I hold the volume down key and the power button, it boots to clockwork recovery. If I just press power, boots to clockwork recovery.
Is there any way to strip off Clockwork recovery and restore the original/stock recovery onto the phone? Or even just remove Clockwork recovery so that it just hangs on the LG boot screen? (See reasoning for this below)
I can still select the USB mount option in Clockwork recovery and the PC still picks it up as a storage device and I can browse around.
The phone is only 7 days old, so I'm almost tempted to just delete the internal memory so that clockwork doesn't show up, then take the phone back to the store and say it wont boot up and try to get it replaced.
Or what would happen if I renamed the clockworkmod folder on the phone's hard drive?
(Just another note, I don't have an external SD card in the phone, just the internal memory)

__________

P_U_A_John said:
1)Plug USB cable
2)Hold "POWER+VOL.UP" (Wait logo LG and mobile screen off) 10 seconds !! For Emergency mode!
3)Hold a second time "POWER+VOL.UP" 10 seconds (the mobile is detected by LGMobile update)
The screen is off in this mode.
PS:
I am trying to upload a backup of the rom.
You may be able to restore from the recovery clockwork ... but it must be 4.0.0.9
Click to expand...
Click to collapse
I do have 4.0.0.9 of the ClockworkMod recovery.
I've tried holding the up volume key and then holding the power key, and I do seem to get emergency mode with the LG Mobile update software detects the phone (with no Clockwork Recovery mod showing on screen) however when I try to use the Recovery phone option, I still get the same error "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update"
If you can upload a backup of the ROM and advise on how to install it via Clockwork, you will be my hero.

1)Plug USB cable
2)Hold "POWER+VOL.UP" (Wait logo LG and mobile screen off) 10 seconds !! For Emergency mode!
3)Hold a second time "POWER+VOL.UP" 10 seconds (the mobile is detected by LGMobile update)
The screen is off in this mode.
PS:
I am trying to upload a backup of the rom.
You may be able to restore from the recovery clockwork ... but it must be 4.0.0.9
Click to expand...
Click to collapse
I do have 4.0.0.9 of the ClockworkMod recovery.
I've tried holding the up volume key and then holding the power key, and I do seem to get emergency mode with the LG Mobile update software detects the phone (with no Clockwork Recovery mod showing on screen) however when I try to use the Recovery phone option, I still get the same error "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update"
If you can upload a backup of the ROM and advise on how to install it via Clockwork, you will be my hero.
Click to expand...
Click to collapse
I had the same error "fatal error " your not putting it in recovery mode right I fixed myn
Sent from my LG-P920 using Tapatalk

ik911 said:
I had the same error "fatal error " your not putting it in recovery mode right I fixed myn
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
How else can I put it into Recovery Mode? How can I tell if I've done it right?
I managed to hold the up volume key and hold down the power button, and the LG Mobile Update detected the phone whilst the screen was blank. I thought that meant I was in recovery mode?
I should point out that the LG Logo wasn't flashing up however. I only ever see the LG Logo before it boots into Clockwork RecoveryMod

I also got that fatal error thing when i bricked my phone. For me the phone would start flashing but it got stuck at 17% and then an error followed saying that there was a communication problem between the phone and the pc. My solution was to switch from my desktop computer to my laptop and the procedure ran smoothly after.
You said that the phone powers up directly after you connect it to the pc and while having the support tool running?
You can try to shut it down so it shows a black screen as you said and then try to boot into emergency mode with the vol.up+power button.
The windows sounds might help you on that. you can listen from the computer when the phone connects/powers up or not.
EDIT: Just read your post, if the phone remains black is a good thing.

if your update fails or goes into clockwork recovery etc you will need LG mobile update on your pc and install the lg p920 drivers
turn your phone off take the battery out leave it for 10 sec, connect battery and usb cable hold power and volume up hold it for 10 sec let go then do it again for 10 sec
now run LG mobile update click customer support > recover type your imei let it update once finished power up phone now you will get a screen on the phone that says updating let it update

Well I'm not sure what I did differently. Not sure if I wasn't pressing the button hard enough or my finger was slipping off, or if I've just somehow tricked the phone, but the LG Phone Update from the Phone Recovery option is now running.
I've been doing the same thing I was doing before (or at least thought I was doing) and I'm not sure what I did differently....but....fingers crossed..... the download will finish in 40 minutes (on a crappy connection at the moment) so I'll be able to see what happens then....
UPDATE -
Progress, though not quite yet success.
The LG Mobile Support tool downloaded the software and applied the update succesfully, though my phone didn't automatically restart. I pressed the power button however and it loaded up and not into Clockwork Recovery Mod. It's not however sitting on an "Updating Firmware" screen and the progress bar doesn't seem to be filling at all.
How long does this part of the process normally take?
Does the phone need to be connected to USB for this part of the process? The LG Mobile Support Tool says the phone is disconnected so I'm guessing there's no active data connection between the PC and phone, just power.
Does this normally take a while? Or should I perhaps try the recovery again?

Lagamorph said:
Well I'm not sure what I did differently. Not sure if I wasn't pressing the button hard enough or my finger was slipping off, or if I've just somehow tricked the phone, but the LG Phone Update from the Phone Recovery option is now running.
I've been doing the same thing I was doing before (or at least thought I was doing) and I'm not sure what I did differently....but....fingers crossed..... the download will finish in 40 minutes (on a crappy connection at the moment) so I'll be able to see what happens then....
UPDATE -
Progress, though not quite yet success.
The LG Mobile Support tool downloaded the software and applied the update succesfully, though my phone didn't automatically restart. I pressed the power button however and it loaded up and not into Clockwork Recovery Mod. It's not however sitting on an "Updating Firmware" screen and the progress bar doesn't seem to be filling at all.
How long does this part of the process normally take?
Does the phone need to be connected to USB for this part of the process? The LG Mobile Support Tool says the phone is disconnected so I'm guessing there's no active data connection between the PC and phone, just power.
Does this normally take a while? Or should I perhaps try the recovery again?
Click to expand...
Click to collapse
This is only supposed to happen when you apply the OTA update. Try to reapply the stock firmware in emergency mode. After the program applies the firmware, it should boot up the phone by itself in android and give you a success or finish message on the computer.

m33ts4k0z said:
This is only supposed to happen when you apply the OTA update. Try to reapply the stock firmware in emergency mode. After the program applies the firmware, it should boot up the phone by itself in android and give you a success or finish message on the computer.
Click to expand...
Click to collapse
Is applying the Stock Firmware not what I did with the LG Mobile Support Tool when it downloaded that huge 300MB+ file?
I have contacted the customer services for Carphone Warehouse, and the guy advised that if the phone seemed to have developed a fault and wouldn't start, then since it's within 28 days of purcahse I can get a like for like replacement. Might have to go ahead and do that this evening.

Bricked my S10e one day after getting it, i need some help

So, today my dad bought me a new phone because i needed one, an S10e. And i, like a massive idiot, decided to flash it with TWRP to try and root it. It worked, sort of, TWRP recovery worked fine, but the phone was in a boot loop when it wasnt in recovery. So i decided to flash the stock firmware, only that it got stuck on the System part when i flashed it with Odin, so i had the brilliant idea to disconnect and try again, except i ended up bricking the entire download mode. I cant turn off my phone, nor can i go into recovery mode, everytime i try to turn off the phone, it boots up back into the download mode with the Smart Switch error, no warnings, no cancels, nothing. Just the error screen. Now if i try to flash it again with Odin on the error screen, it gets stuck on Boot.
Am i royally ****ed to the point where i cant send it to the store? I got it today so i thought i could take it back to where i bought the phone for a replacement or repair, but if not then i honestly dont know what to do. I tried using Kies or Smart Switch for restoration, but they dont even recognise it.

Ooohh...So sorry. Im going to look around for some help for you.
I used to do this but havent the need in years with the new technologies.

Better to ask over at the Magisk root thread in the regular S10 forum.

You can call Samsung and if its under warranty they can walk you through or do it while connected to your computer.
---------- Post added at 10:44 PM ---------- Previous post was at 10:17 PM ----------
I found this...
https://www.androidexplained.com/galaxy-s10-unbrick/
and this
https://youtu.be/kIOiDSphmRI
I hope this helps.

you should be able to get into download even after that error
just take out the usb cable and hold power + bixby+ vol down to force reboot then just hold bixy and vol down and plug the cable then you are back into download mode and restore your phone. It's not messed up
Search on youtube s9 download mode.

:good: Help it rise Undertaker21.

Try to boot in fastboot and reflash all partition.

TheUndertaker21 said:
you should be able to get into download even after that error
just take out the usb cable and hold power + bixby+ vol down to force reboot then just hold bixy and vol down and plug the cable then you are back into download mode and restore your phone. It's not messed up
Search on youtube s9 download mode.
Click to expand...
Click to collapse
Thats the thing, if i hold vol down and power for the 7 secs to get out of download mode, it automatically boots itself back into download mode without any "press vol up to continue" and stuff, its just the constant "an error has occured while updating system software" screen and absolutly nothing else, and like i said, i tried to reflash all the firmware back to stock, but odin just stops at Boot, and a message appears on the error screen saying a PIT check failed (thinking about it, i could just be that i downloaded the wrong firmware, i dont actually know what country the phone was made in, and if it helps, i bought it in Lithuania, and i unlocked it with a Lithuanian SIM card, so im not sure what country firmware i should get. One strange thing: i remember looking at the display case at the salon i bought the phone at, and it said that the phone has the Snapdragon CPU chipset, but if that was true then i wouldnt be able to have unlocked my bootloader for Odin in the first place)

Could you check the back glass for the model number?
It should start with SM-

rishab_s said:
Could you check the back glass for the model number?
It should start with SM-
Click to expand...
Click to collapse
The model is SM-G970F/DS. I remember this from when i looked for the firmware i need to reflash it

Install smart switch on your PC and do the emergency software recovery.

Intratech said:
Install smart switch on your PC and do the emergency software recovery.
Click to expand...
Click to collapse
I already said, smart switch doesnt recognize the phone, nor do i even have a code for the emergency recovery

TehHoovy said:
I already said, smart switch doesnt recognize the phone, nor do i even have a code for the emergency recovery
Click to expand...
Click to collapse
Could you take a picture of the phone in download mode?
This may help me or someone else figure out if your phone is recoverable through Odin.
Sent from my Sony Xperia XA2 using XDA Labs

sieghartRM said:
Could you take a picture of the phone in download mode?
This may help me or someone else figure out if your phone is recoverable through Odin.
Sent from my Sony Xperia XA2 using XDA Labs
Click to expand...
Click to collapse
i would if i could, dont have the phone with me atm, left it with my dad, but i guess just imagine a boot loop but instead of the regular splash screen, its the download mode emergency error and not a single button combination works

TehHoovy said:
i would if i could, dont have the phone with me atm, left it with my dad, but i guess just imagine a boot loop but instead of the regular splash screen, its the download mode emergency error and not a single button combination works
Click to expand...
Click to collapse
Use smart switch, please follow the instructions in this video
You need IMEI and Serial number which can be found on the box of your phone or it will be embedded in the back glass
I believe on the newer version of smart switch you have to enable device Initialization from the preferences tab

TehHoovy said:
i would if i could, dont have the phone with me atm, left it with my dad, but i guess just imagine a boot loop but instead of the regular splash screen, its the download mode emergency error and not a single button combination works
Click to expand...
Click to collapse
Have you tried holding down bixby botton + Volume down then plugging in the USB cable?

Intratech said:
Have you tried holding down bixby button + Volume down then plugging in the USB cable?
Click to expand...
Click to collapse
yes, i have, and again, nothing happens, it just instantly goes straight to the error you get when you **** up an odin flash in the middle of its work

This is so odd. Ideally a picture of the error screen would really help here. It's usually pretty darn difficult to brick a Samsung phone.
Have you tried using a different USB cable and PC to do the Odin flash?

Intratech said:
This is so odd. Ideally a picture of the error screen would really help here. It's usually pretty darn difficult to brick a Samsung phone.
Have you tried using a different USB cable and PC to do the Odin flash?
Click to expand...
Click to collapse
Sadly i do not have my phone with me at the moment, however this is the exact error screen i get, and its the only screen i get, because it the only thing that actually lights up the screen
https://img.xda-cdn.com/MiQBugyvcr1...yazo.com/cae0a29bba68b440297ab7cc93413ff3.png
And no, i have not tried that as i do not have a second pc

TehHoovy said:
Sadly i do not have my phone with me at the moment, however this is the exact error screen i get, and its the only screen i get, because it the only thing that actually lights up the screen
https://img.xda-cdn.com/MiQBugyvcr1...yazo.com/cae0a29bba68b440297ab7cc93413ff3.png
And no, i have not tried that as i do not have a second pc
Click to expand...
Click to collapse
Do you know the model number e.g. my is SM-G970F UK?
Sent from my Sony Xperia XA2 using XDA Labs