Hi all,
I'm trying to save a relative's HTC One S which got its internal storage wiped.
Currently I can access Hboot, fastboot, and recovery (that's it) but I get the error in the attachment when I'm in fastboot USB
I'm unable to mount the internal storage or flash a new recovery too.
Information about the phone:
*** UNLOCKED ***
VLE PVT SHIP S-ON RL
HBOOT-1.13.0000
RADIO-0.17.31501S.10_2
OpenDSP-v28.1.0.32.0504
eMMC-boot
Apr 20 2012, 15:14:18
TWRP Version 2.5.0.0
Any help is appreciated!
Thanks!
In fastboot usb do you have fastboot command recognize the device? If you issue "fastboot devices" what you get?
Sent from nowhere over the air...
Rapier said:
In fastboot usb do you have fastboot command recognize the device? If you issue "fastboot devices" what you get?
Sent from nowhere over the air...
Click to expand...
Click to collapse
When I type fastboot devices nothing appears.
remove old htc drivers and htc sync too, download and install these latest drivers ( http://forum.xda-developers.com/showthread.php?t=2217396 ) , then try connect fastboot again . If nothing happens tell us.
if you use windows 8.1 try these, same procedure ( http://forum.xda-developers.com/showthread.php?t=2544146 )
beerfly said:
remove old htc drivers and htc sync too, download and install these latest drivers ( http://forum.xda-developers.com/showthread.php?t=2217396 ) , then try connect fastboot again . If nothing happens tell us.
if you use windows 8.1 try these, same procedure ( http://forum.xda-developers.com/showthread.php?t=2544146 )
Click to expand...
Click to collapse
I got it detected on another computer;
I relocked the bootloader with "fastboot oem lock" but now it doesn't enter recovery mode, and has *** SECURITY WARNING *** at the top of the screen
what exactly you did when the computer detected your phone, what steps and stuff you used.
beerfly said:
what exactly you did when the computer detected your phone, what steps and stuff you used.
Click to expand...
Click to collapse
Typed "fastboot devices" to see if the phone was connected
Typed "fastboot oem lock" to relock bootloader
Used WinDroid Universal HTC Toolkit to flash TWRP 2.7.0.0
And that's where I am now. Thanks!
065271538 said:
Typed "fastboot devices" to see if the phone was connected
Typed "fastboot oem lock" to relock bootloader
Used WinDroid Universal HTC Toolkit to flash TWRP 2.7.0.0
And that's where I am now. Thanks!
Click to expand...
Click to collapse
Bootloader need to be UNlocked when installing recovery, now you need to go back to stock, unlock re locked bootloader and then put recovery. Thats why the security messege appears.
beerfly said:
Bootloader need to be UNlocked when installing recovery, now you need to go back to stock, unlock re locked bootloader and then put recovery. Thats why the security messege appears.
Click to expand...
Click to collapse
Okay thanks for that! I got TWRP 2.6.1.0 installed (anything higher would cause a reboot loop) and have Internal SDcard mounted in recovery mode. Where do I go from here? I'm just looking to go back to a stock device (no more hassles)
Thanks again!
I guess find an RUU that matches your device. You can run a new RUU as well.
http://forum.xda-developers.com/showthread.php?t=2678700
That worked!
Thanks to everyone
Can you tell us what RUU you used?
Thanks!
Related
Hi,
could help need for unbricking...
Current status:
*** UNLOCKED ***
Pyramid PVT SHIP S-ON RL
HBOOT-1.27.0000
RADIO-11.23.3504.07_M2
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34
When switching on, there is just the HTC-Logo.
I can just boot into Bootloader.
When trying to boot into Recovery (from Bootloader) -> just HTC Logo
Problem ocurred when trying to flash a custom rom (device was rooted).
I think there is a zip file I could put on the sdcard, which is flashed autmatically...?
Please help
thx
----------
just tried OTA_PYRAMID_ICS_HTC_Europe_3.32.401.5-1.50.401.1_P_release_246627z7pljztztog0er50.zip
(after rename to PG58DIAG.zip)
http://forum.xda-developers.com/showthread.php?t=1538032&page=4
still does not boot...
please help...
I have already tried all images from http://vi8.info/HTC-Sensation/Stock-Recovery without success
:-/
start fresh again
flash a new rom using this guide
http://forum.xda-developers.com/showthread.php?t=1631861
NOTE: all the process mentioned in the guide can be done from bootloader itself ..i mean using the fastboot commands
ganeshp said:
start fresh again
flash a new rom using this guide
http://forum.xda-developers.com/showthread.php?t=1631861
NOTE: all the process mentioned in the guide can be done from bootloader itself ..i mean using the fastboot commands
Click to expand...
Click to collapse
thx for the answer.
but the problem is, that I can not connect to the phone via fastboot commands :-/
shadow_empire1 said:
thx for the answer.
but the problem is, that I can not connect to the phone via fastboot commands :-/
Click to expand...
Click to collapse
let me get this straight ..
when you connect the phone from bootloader to PC ..whats the phone is saying ?
HBOOT or FASTBOOT USB ?
if its saying HBOOT ..press power button once ..that will take you to FASTBOOT USB
if its FASTBOOT USB then you are onnected properly
now to test the connection
open command window from the adb/fastboot folder of your PC (if windows hold shift + right click -> open command window here)
and type this
fastboot devices
it should show your device ..and the rest you follow from the guide
ganeshp said:
let me get this straight ..
when you connect the phone from bootloader to PC ..whats the phone is saying ?
HBOOT or FASTBOOT USB ?
if its saying HBOOT ..press power button once ..that will take you to FASTBOOT USB
if its FASTBOOT USB then you are onnected properly
now to test the connection
open command window from the adb/fastboot folder of your PC (if windows hold shift + right click -> open command window here)
and type this
fastboot devices
it should show your device ..and the rest you follow from the guide
Click to expand...
Click to collapse
I see...
I will try.
Thx for you help...
thx for your help.
device is unbricked!
shadow_empire1 said:
thx for your help.
device is unbricked!
Click to expand...
Click to collapse
Glad it worked
And thanks.. You hit thanks button for that
Sent from my HTC Sensation 4G using xda premium
Hi,
I'm having a lot of problems after rooting my device.
I can get into the Bootloader and Recovery, so I'm certain it's not bricked.
Here is my screen in bootloader:
*** UNLOCKED ***
DOUBLESHOT PVT SHIP S-ON RL
HBOOT-1. 45 .0013
MICROP-0353
eMMC-boot
Nov 21 2011.20:20:47
Now, when I load fastboot and connect it to the USB, it says "fastboot usb" but "adb devices" doesn't show it in the list.
I had it working when I booted it into CM10, but I needed to get it to s-off in order to SIM unlock it, but "adb devices" would NOT pick it up, in bootloader OR CM10.1 (Yes I checked all settings from within CM10, allowing debugging and root etc).
I then decided to pay $14.99 for an unlock code to save the hassle of going through the s-off problems as I couldn't detect it using revolution or adb. Turns out only stock rom will allow SIM Unlock so I tried to flash a stock rom, several different ones now and for some reason it didn't get past the splash screen on any of them. So I tried flashing PD59IMG.zip which looked like it worked, but then: Splash screen.
I'm now completely stuck. Please help.
Fixed: http://forum.xda-developers.com/showthread.php?t=2100182&highlight=stock+rom
Use "Fastboot Devices" when in fastboot and see if it recognizes it then. Also from your hboot it looks like you have a mytouch 4g slide instead of a mytouch 4g. If you are unlocked but have s-on you have to flash the kernal before flashing the rom. Its frustrating but pretty easy if you follow these instructions http://forum.xda-developers.com/showthread.php?t=1508556
Please go to the mytouch 4g slide forums, you have a doubleshot, these are the glacier forums.
THEindian said:
Please go to the mytouch 4g slide forums, you have a doubleshot, these are the glacier forums.
Click to expand...
Click to collapse
...uhh no. These are the MT4GS forums, not the MT4G forums.
HappyKhicken said:
...uhh no. These are the MT4GS forums, not the MT4G forums.
Click to expand...
Click to collapse
This was originally put in the wrong forum. A mod moved it!
Sent from my Nexus 4 using Tapatalk 2
Spudguy said:
Hi,
I can get into the Bootloader and Recovery, so I'm certain it's not bricked.
Now, when I load fastboot and connect it to the USB, it says "fastboot usb" but "adb devices" doesn't show it in the list.
I had it working when I booted it into CM10, but I needed to get it to s-off in order to SIM unlock it, but "adb devices" would NOT pick it up, in bootloader OR CM10.1 (Yes I checked all settings from within CM10, allowing debugging and root etc).
Click to expand...
Click to collapse
So did you install CWR already, or are you still on stock recovery? Reinstalling drivers for your phone sounds like what might help out.
Limewirelord said:
So did you install CWR already, or are you still on stock recovery? Reinstalling drivers for your phone sounds like what might help out.
Click to expand...
Click to collapse
He needs to use fastboot commands while in fastboot mode like 'fastboot devices' adb commands don't work while in fastboot
Sent from my Nexus 4 using Tapatalk 2
you installed the correct mt4gs fastboot drivers cause that happened to me when i DLed the tether version of htc fastboot and didnt work maybe...thats the problem
Spudguy said:
Hi,
I'm having a lot of problems after rooting my device.
I can get into the Bootloader and Recovery, so I'm certain it's not bricked.
Here is my screen in bootloader:
*** UNLOCKED ***
DOUBLESHOT PVT SHIP S-ON RL
HBOOT-1. 45 .0013
MICROP-0353
eMMC-boot
Nov 21 2011.20:20:47
Now, when I load fastboot and connect it to the USB, it says "fastboot usb" but "adb devices" doesn't show it in the list.
I had it working when I booted it into CM10, but I needed to get it to s-off in order to SIM unlock it, but "adb devices" would NOT pick it up, in bootloader OR CM10.1 (Yes I checked all settings from within CM10, allowing debugging and root etc).
I then decided to pay $14.99 for an unlock code to save the hassle of going through the s-off problems as I couldn't detect it using revolution or adb. Turns out only stock rom will allow SIM Unlock so I tried to flash a stock rom, several different ones now and for some reason it didn't get past the splash screen on any of them. So I tried flashing PD59IMG.zip which looked like it worked, but then: Splash screen.
I'm now completely stuck. Please help.
Fixed: http://forum.xda-developers.com/showthread.php?t=2100182&highlight=stock+rom
Click to expand...
Click to collapse
strapped365 said:
He needs to use fastboot commands while in fastboot mode like 'fastboot devices' adb commands don't work while in fastboot
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
You need the proper drivers installed for the device in fastboot mode also. They are each their own device, you would need to install the proper drivers for the phone in both adb and fastboot modes. I did this a few days ago when setting up the phone and Android SDK on Windows 8 and I had to install the HTC driver for them separately.
Hey Guys,
I post early the same topic but i didnt had my phone then, and now i have him.
Ok, my phone stuck at the htc screen and does not want to boot, i tried first the android 4.4 rom but without luck, then i tried android 4.2.2 with cm 10.1 (http://forum.xda-developers.com/showthread.php?t=2115520) and without luck. Here is my Hboot etc:
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I got ClockworkMod Recovery v5.8.0.9
I dont have the fastboot and adb files anymore on my pc!
Thanks already,
Friso Kort
Friso_HK said:
Hey Guys,
I post early the same topic but i didnt had my phone then, and now i have him.
Ok, my phone stuck at the htc screen and does not want to boot, i tried first the android 4.4 rom but without luck, then i tried android 4.2.2 with cm 10.1 (http://forum.xda-developers.com/showthread.php?t=2115520) and without luck. Here is my Hboot etc:
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I got ClockworkMod Recovery v5.8.0.9
I dont have the fastboot and adb files anymore on my pc!
Thanks already,
Friso Kort
Click to expand...
Click to collapse
since you are on S-ON you have to flash the boot.img of the rom via fastboot command
or flash 4ext recovery and enable smartflash from it before flashing the rom
as you understand in any case you need sdk tools(adb and fastboot) on your pc
Friso_HK said:
Hey Guys,
I post early the same topic but i didnt had my phone then, and now i have him.
Ok, my phone stuck at the htc screen and does not want to boot, i tried first the android 4.4 rom but without luck, then i tried android 4.2.2 with cm 10.1 (http://forum.xda-developers.com/showthread.php?t=2115520) and without luck. Here is my Hboot etc:
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I got ClockworkMod Recovery v5.8.0.9
I dont have the fastboot and adb files anymore on my pc!
Thanks already,
Friso Kort
Click to expand...
Click to collapse
You need to change your recovery to 4ext 1.0.0.6 RC 1
sent from HTC Sensation 4G
rzr86 said:
since you are on S-ON you have to flash the boot.img of the rom via fastboot command
or flash 4ext recovery and enable smartflash from it before flashing the rom
as you understand in any case you need sdk tools(adb and fastboot) on your pc
Click to expand...
Click to collapse
Do you now where i can download that?
Friso_HK said:
Do you now where i can download that?
Click to expand...
Click to collapse
4ext recovery or sdk tools?
rzr86 said:
4ext recovery or sdk tools?
Click to expand...
Click to collapse
I download Universal Naked Driver 0.72 but i dont now how it works, i need the driver for my htc sensation z710e
rzr86 said:
4ext recovery or sdk tools?
Click to expand...
Click to collapse
Forgot that question, i have fastboot and adb and i want to flash boot.img thats in my rom (or do i need 4ext?) but i need the driver of my htc sensation z710e, i have pdanet and universal naked drive 0.72 but i do it in fastboot usb.
Friso_HK said:
Forgot that question, i have fastboot and adb and i want to flash boot.img thats in my rom (or do i need 4ext?) but i need the driver of my htc sensation z710e, i have pdanet and universal naked drive 0.72 but i do it in fastboot usb.
Click to expand...
Click to collapse
HTC Sync.
nlooooo said:
HTC Sync.
Click to expand...
Click to collapse
I do i form fastboot usb so can i then at htc sync?
Friso_HK said:
Forgot that question, i have fastboot and adb and i want to flash boot.img thats in my rom (or do i need 4ext?) but i need the driver of my htc sensation z710e, i have pdanet and universal naked drive 0.72 but i do it in fastboot usb.
Click to expand...
Click to collapse
put the boot.img in your adb and fastboot folder
open in that folder a cmd window and type
fastboot flash boot boot.img
for htc drivers see here
http://forum.xda-developers.com/showthread.php?t=2217396
rzr86 said:
put the boot.img in your adb and fastboot folder
open in that folder a cmd window and type
fastboot flash boot boot.img
for htc drivers see here
http://forum.xda-developers.com/showthread.php?t=2217396
Click to expand...
Click to collapse
i works i looooooooove youuuuuuuuuuuuuuuuu
What about those of us that have no USB connectivity, meaning when USB cable is connected, you get no "Fastboot USB" on the bootloader screen?
I'm S-on, so flashing recoveries from the SD card isn't possible.
Try this...
PoXFreak said:
What about those of us that have no USB connectivity, meaning when USB cable is connected, you get no "Fastboot USB" on the bootloader screen?
I'm S-on, so flashing recoveries from the SD card isn't possible.
Click to expand...
Click to collapse
Try following method 2 in this guide( through updating via PG58IMG.zip file) http://forum.xda-developers.com/showthread.php?t=1599816. Be carefule about the md5 checksum of the recovery image. Double check before flashing!!
After this, boot into recovery(from the bootloader menu, select appropriate superuser.zip file(for rooting, search xda ...there are many options) and flash root. You now have a custom recovery and are rooted. Now you can flash any custom rom.
All the above assuming you can somehow transfer files to your SD card through a card reader or any other means...
NOTE: Delete the PG58IMG.zip after flashing recovery.
ushmal said:
Try following method 2 in this guide( through updating via PG58IMG.zip file) http://forum.xda-developers.com/showthread.php?t=1599816. Be carefule about the md5 checksum of the recovery image. Double check before flashing!!
After this, boot into recovery(from the bootloader menu, select appropriate superuser.zip file(for rooting, search xda ...there are many options) and flash root. You now have a custom recovery and are rooted. Now you can flash any custom rom.
All the above assuming you can somehow transfer files to your SD card through a card reader or any other means...
NOTE: Delete the PG58IMG.zip after flashing recovery.
Click to expand...
Click to collapse
Still won't work. I have tried flashing stock firmwares, stock and non-stock recoveries, reflashing root.zip, restore from known good backups, nothing has worked. Phone is stuck at first HTC logo screen and will go no further, and with no USB connectivity, it's impossible for me to flash even PG58IMGs' because the phone is S-on.
Maybe this could work for you...just a suggestion
PoXFreak said:
Still won't work. I have tried flashing stock firmwares, stock and non-stock recoveries, reflashing root.zip, restore from known good backups, nothing has worked. Phone is stuck at first HTC logo screen and will go no further, and with no USB connectivity, it's impossible for me to flash even PG58IMGs' because the phone is S-on.
Click to expand...
Click to collapse
Ok, from your reply i gather that even though you transferred the PG581MG to your SD card, the phone did not update when your got to the bootloader menu. I do not think being S-ON will prevent you from installing from the zip file...but maybe i am wrong. Hey now all i can think is this:
Turn off your phone, remove the battery, wait for some time(~10seconds), then put the battery back in. Now press Power +Vol down switch together. Now at the boot loader menu select Fastboot and press Power button. Connect your phone to your PC now and wait. The check if the next screen shows 'FASTBOOT USB'.
If you get 'FASTBOOT USB' in the next screen, then you have multiple options, but for you i would suggest that you download the latest RUU for the phone depending on your region and cid. Then run the ruu while the device is still in FASTBOOT USB mode. This will restore your phone's firmware recovery and rom back to stock.
But if your phone does not show fastboot usb then i'm stumped dude...maybe the experts here in our sensation community will be able to help out....
All the best ...and report if anything improves...
Hi there. I've somehow managed to softbrick my Sensation. It's on a permanent whitescreen/green HTC logo reboot loop.
Booting into bootloader, it says I have...
Firmware - 3.32
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.110
RADIO-11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012.17.33.24
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
The looping boot means I can't log in via ADP.
Anyone know how to dig my way out of this hole?
dale303 said:
Hi there. I've somehow managed to softbrick my Sensation. It's on a permanent whitescreen/green HTC logo reboot loop.
Booting into bootloader, it says I have...
Firmware - 3.32
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.110
RADIO-11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012.17.33.24
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
The looping boot means I can't log in via ADP.
Anyone know how to dig my way out of this hole?
Click to expand...
Click to collapse
did you try to flash a custom rom?
what recovery do you have?
rzr86 said:
did you try to flash a custom rom?
what recovery do you have?
Click to expand...
Click to collapse
It's HBOOT 1.27 but I get a red triangle when going into recovery.
Was attempting and update to cm-11-20131116-Sultan-pyramid.
dale303 said:
It's HBOOT 1.27 but I get a red triangle when going into recovery.
Was attempting and update to cm-11-20131116-Sultan-pyramid.
Click to expand...
Click to collapse
You need to install a custom recovery in order to flash custom roms. I recommend installing 4ext via fastboot
Sent from my Nexus 7 using Tapatalk
heavy_metal_man said:
You need to install a custom recovery in order to flash custom roms. I recommend installing 4ext via fastboot
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
So how do I get that installed on a softbricked phone?
dale303 said:
So how do I get that installed on a softbricked phone?
Click to expand...
Click to collapse
You use fastboot to flash the recovery.img available from the 4ext website.
Sent from my HTC Sensation using Tapatalk
heavy_metal_man said:
You use fastboot to flash the recovery.img available from the 4ext website.
Sent from my HTC Sensation using Tapatalk
Click to expand...
Click to collapse
Of course. the img is either very well hidden or not available from the website :-/
Never mind. I found once elsewhere except...
I can't use fastboot or adb as the phone is not being recognised using usb.
Phone constantly rebooting so get the usb connected, then disconnected dings but won't stay awake long enough to lock in.
If I load the bootloader first than try I get all sorts of device not found errors.
"adb > devices" reveals nothing
"adb reboot-bootloader" = "error device not found"
etc.
(BTW all these work on my HTC One so it's more likely my Sensation that's not set up right here. In fact my Sensation used to work via USB, now it doesn't)
dale303 said:
Of course. the img is either very well hidden or not available from the website :-/
Never mind. I found once elsewhere except...
I can't use fastboot or adb as the phone is not being recognised using usb.
Phone constantly rebooting so get the usb connected, then disconnected dings but won't stay awake long enough to lock in.
If I load the bootloader first than try I get all sorts of device not found errors.
"adb > devices" reveals nothing
"adb reboot-bootloader" = "error device not found"
etc.
(BTW all these work on my HTC One so it's more likely my Sensation that's not set up right here. In fact my Sensation used to work via USB, now it doesn't)
Click to expand...
Click to collapse
Use volume down and power to boot into hboot, from hboot use the volume buttons to select fastboot and use power to select it. Connect the device to the computer via USB and wait for drivers to install if necessary. Then you can use the fastboot commands to flash the recovery.img use
Fastboot flash recovery recovery.img
Where recovery.img is the name of the .IMG you have downloaded and placed into your fastboot path.
Sent from my Nexus 7 using Tapatalk
heavy_metal_man said:
Use volume down and power to boot into hboot, from hboot use the volume buttons to select fastboot and use power to select it. Connect the device to the computer via USB and wait for drivers to install if necessary. Then you can use the fastboot commands to flash the recovery.img use
Fastboot flash recovery recovery.img
Where recovery.img is the name of the .IMG you have downloaded and placed into your fastboot path.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Oof! I was connecting the USB too early. Wasn't getting the FASTBOOT USB section.
Thanks.
Nearly there now.
dale303 said:
Oof! I was connecting the USB too early. Wasn't getting the FASTBOOT USB section.
Thanks.
Nearly there now.
Click to expand...
Click to collapse
you will see FASTBOOT USB section not only when installing htc drivers but also when choosing fastboot from bootloader
maybe you missed that
dale303 said:
It's HBOOT 1.27 but I get a red triangle when going into recovery.
Was attempting and update to cm-11-20131116-Sultan-pyramid.
Click to expand...
Click to collapse
Is you bootloader unlocked?
Hello,
My phone was updating and crashed. The phone turns on but only the HTC logo appears and then goes to a black screen. I can't fastboot into the device as it is not recognised. I can't access TWRP recovery any more and goes to a downloading screen and then restarts again. While in the bootloader the phone shows the following:
***TAMPERED***
*** RELOCKED***
M4_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.19.0000
RADIO-1.22.40e.00.07
OpenDSP-v19.2.0268.0927
OS-1.31.401.1
eMMC-boot 1024MB
Aug 7 2013, 17:37:54.0
Please help me, any help greatly appreciated!
Update:
The phone is working and has an update but it can not update on the device, is there a way i can get the downloaded OTA file on to my PC?
CoolAndroid1 said:
Hello,
My phone was updating and crashed. The phone turns on but only the HTC logo appears and then goes to a black screen. I can't fastboot into the device as it is not recognised. I can't access TWRP recovery any more and goes to a downloading screen and then restarts again. While in the bootloader the phone shows the following:
***TAMPERED***
*** RELOCKED***
M4_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.19.0000
RADIO-1.22.40e.00.07
OpenDSP-v19.2.0268.0927
OS-1.31.401.1
eMMC-boot 1024MB
Aug 7 2013, 17:37:54.0
Please help me, any help greatly appreciated!
Click to expand...
Click to collapse
Hi,
What do you want to flash stock sense 6...??
greets
shivasrage said:
Hi,
What do you want to flash stock sense 6...??
greets
Click to expand...
Click to collapse
Hello,
Yes I would like to go back to Sense 6 or any stock firmware preferably 4.4.2
Thanks
CoolAndroid1 said:
Hello,
Yes I would like to go back to Sense 6 or any stock firmware preferably 4.4.2
Thanks
Click to expand...
Click to collapse
Ok
First I recommend you to unlock your bootloader.
So if you are in bootloader and your device is not recognised I think it´s a driver issue.
If you allready checked it check it once more or update your tools (ADB, fastboot)
If nothing helps you could go to recovery and format your device (not only wipe format) should be clear that all data on device is lost.
Try different recoverys some people report that philz also works fine on M_4. (try install new rom option on philz).
DONT flash stock sense 6 ROM (wrong partition layout for this hboot) with this hboot rather take 5.5.
I´m sorry but without get connectet via ADB or fastboot I think there is no chance to get it working again.
greets
shivasrage said:
Ok
So if you are in bootloader and your device is not recognised I think it´s a driver issue.
If you allready checked it check it once more or update your tools (ADB, fastboot)
If nothing helps you could go to recovery and format your device (not only wipe format) should be clear that all data on device is lost.
Try different recoverys some people report that philz also works fine on M_4. (try install new rom option on philz).
DONT flash stock sense 6 ROM (wrong partition layout for this hboot) with this hboot rather take 5.5.
With out get connectet via ADB or fastboot I think there is no chance to get it working again.
greets
Click to expand...
Click to collapse
I can not access recovery to wipe anything out, on bootloader if i choose to wipe it attempts to load recovery which goes into download mode. The device comes up as "Device failed emulation" on Windows 8
CoolAndroid1 said:
I can not access recovery to wipe anything out, on bootloader if i choose to wipe it attempts to load recovery which goes into download mode. The device comes up as "Device failed emulation" on Windows 8
Click to expand...
Click to collapse
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets
Ok, I will use a win 7 pc and let you know
shivasrage said:
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets
Click to expand...
Click to collapse
After i fix my drivers issue what can i do afterwards?
shivasrage said:
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets
Click to expand...
Click to collapse
I can now do the fastboot command from CMD
CoolAndroid1 said:
After i fix my drivers issue what can i do afterwards?
Click to expand...
Click to collapse
If you have a connection via fastboot you first have to decide what ROM you want, search for the matching firmware.
for example flash the latest firmware for M_4... 4.09.401.3 from here (new partition layout for e.g. sense 6):
https://docs.google.com/file/d/0BzCFBBNdXagdcEMybkdBME5iUE0/edit
After that flash TWRP 2.7.1.1 or philz and format all you have to try one of this recoverys should work.
Next push or sideload a ROM via adb I recommend you one them:
http://forum.xda-developers.com/htc...-official-stock-sense-6-rom-firmware-t2817921
You can decide what you want rooted or not it doesn´t matter.
After installing with succsess try to reboot that´s it.
greets
I encountered a similar issue when playing around with returning my device to stock. I flashed stock recovery, then re-locked my bootloader. What is the downloading screen you're seeing? Is it the stock recovery screen?
To fix, i had to change CID back to stock (for me that was, CWS__001)
Unlock bootloader again, using HTC unlock.bin (unlock.bin wouldn't work when i was on super cid)
Flash custom recovery TWRP 2.6.3.0 (I'm not sure if 2.7.1.1 works with the old partition layout, so i used this version until i had upgraded to hboot 2.22, then I flashed 2.7.1.1. This may be an unnecessary step, but it always worked for me)
Once twrp was working again...
Flash stock hboot 2.22 found in the dev section
Flash TWRP 2.7.1.1 (again, might be an unnecessary step)
Boot to recovery
From TWRP, adb push the sense 6 rom i wanted to flash (IC 3.07 in my case)
After the push completed, flash ROM and reboot and all was good
As you can see, the steps i took require that fastboot and adb drivers work flawlessly, especially when pushing ROM to the device using abd.
If any of this seems unfamiliar, then don't do these steps. Again, this is just what i did when i flashed stock recovery and re-locked bootloader with a ROM that wouldn't boot.
jollywhitefoot said:
I encountered a similar issue when playing around with returning my device to stock. I flashed stock recovery, then re-locked my bootloader. What is the downloading screen you're seeing? Is it the stock recovery screen?
To fix, i had to change CID back to stock (for me that was, CWS__001)
Unlock bootloader again, using HTC unlock.bin (unlock.bin wouldn't work when i was on super cid)
Flash custom recovery TWRP 2.6.3.0 (I'm not sure if 2.7.1.1 works with the old partition layout, so i used this version until i had upgraded to hboot 2.22, then I flashed 2.7.1.1. This may be an unnecessary step, but it always worked for me)
Once twrp was working again...
Flash stock hboot 2.22 found in the dev section
Flash TWRP 2.7.1.1 (again, might be an unnecessary step)
Boot to recovery
From TWRP, adb push the sense 6 rom i wanted to flash (IC 3.07 in my case)
After the push completed, flash ROM and reboot and all was good
As you can see, the steps i took require that fastboot and adb drivers work flawlessly, especially when pushing ROM to the device using abd.
If any of this seems unfamiliar, then don't do these steps. Again, this is just what i did when i flashed stock recovery and re-locked bootloader with a ROM that wouldn't boot.
Click to expand...
Click to collapse
I cant unlock my bootloader as its relocked and fails, I cant install TWRP either
CoolAndroid1 said:
I cant unlock my bootloader as its relocked and fails, I cant install TWRP either
Click to expand...
Click to collapse
Did you get fastboot working yet? Does "fastboot devices" show your device? You can't do anything until fastboot works...but I imagine it worked at some point, since you unlocked and re-locked your device.
You can't install recovery because your bootloader is locked. And you can't unlock your bootloader until you change your CID back to whatever it was when you created the unlock.bin file on the HTC website.
Are you getting this error when you attempt to unlock?
FAILED (remote: unlock token check failed)
jollywhitefoot said:
Did you get fastboot working yet? Does "fastboot devices" show your device? You can't do anything until fastboot works...but I imagine it worked at some point, since you unlocked and re-locked your device.
You can't install recovery because your bootloader is locked. And you can't unlock your bootloader until you change your CID back to whatever it was when you created the unlock.bin file on the HTC website.
Are you getting this error when you attempt to unlock?
FAILED (remote: unlock token check failed)
Click to expand...
Click to collapse
Hello,
I did have the error code above but i used FUU to flash back to stock and all is fine now!!
CoolAndroid1 said:
Hello,
I did have the error code above but i used FUU to flash back to stock and all is fine now!!
Click to expand...
Click to collapse
Cool. Did you use fuu from here?
http://forum.xda-developers.com/showthread.php?t=2659109
jollywhitefoot said:
Cool. Did you use fuu from here?
http://forum.xda-developers.com/showthread.php?t=2659109
Click to expand...
Click to collapse
Yep! Windows 8 sucks with drivers and didn't work so had to switch to a different laptop!
CoolAndroid1 said:
Yep! Windows 8 sucks with drivers and didn't work so had to switch to a different laptop!
Click to expand...
Click to collapse
That's what i had to do when i first tried to root my phone. I was on Windows 7, but it was an old install and had all kinds of software on it that might have been preventing usb from working (iTunes, HTC Sync, some other random software, etc.) Sometimes, I would even have trouble connecting an external HD!
I ended up installing a clean copy of XP on an old computer that i now use strictly for flashing stuff to my phone.
New problem
I have 4.3 on my HTC now and have received an update for 4.4.2, however when I try this it goes a quarter of the way then comes up with a red triangle and exclamation point. The device is still rooted somehow. Can you help me update?
CoolAndroid1 said:
New problem
I have 4.3 on my HTC now and have received an update for 4.4.2, however when I try this it goes a quarter of the way then comes up with a red triangle and exclamation point. The device is still rooted somehow. Can you help me update?
Click to expand...
Click to collapse
I don't think OTA will work on unlocked/tampered device with custom recovery.I think you need to run ruu.exe if one is available for you to get 100% stock before OTA will work again.
jollywhitefoot said:
I don't think OTA will work on unlocked/tampered device with custom recovery.I think you need to run ruu.exe if one is available for you to get 100% stock before OTA will work again.
Click to expand...
Click to collapse
Hello,
I found an FUU for 4.4 Kitkat on the link you posted earlier, It does all the necessary actions with no failures and completes with a Congrats screen but the firmware is the same?