Database Info

SlimKat stable build 5 released!

Edit: Attention: There was a mistake in the changelog: all m7 variants are not unified, only the GSM variants. And Samsung Galaxy Note 10.1 ( SCH-I925) will get official support from next week. Also, m7vzw will only get a weekly this time around. Sorry for the inconvenience.
Stable SlimKat 5.0 is building and will be available for supported devices soon! - Expect a huge load of small changes, and a huge amount of bugfixes. Also, gapps received a major update, so make sure to update them.
Visit www.slimroms.net for info and downloads.
Major key changes in SlimKat 5.0:
- Fixes to Slim Recents.
- Changes and fixes to Chamber of Secrets.
- General fixes across the rom
New Devices:
- HTC One M8 (Unified).
- Samsung Galaxy Note 8 (N5100, N5110, N5120).
- //Samsung Galaxy Note 10.1 ( SCH-I925)// - Sorry guys next week.
Unified devices:
- m7att, m7tmo and m7ul are now m7.
- jfltexx, jflteatt, jfltetmo, jfltespr, jfltevzn, jfltecan are now jflte.
- d2att, d2tmo, d2spr, d2vzn, d2usc, d2mtr are now d2lte.
Devices that don't get stable will get weekly (which will start soon):
G2 family
Hlte
M8
N51xx family
i925
galaxysmtd
i9100g
v500
xt92x
NOTE:
For dirty flashers: Before you flash, you MUST wipe your system manually. Gapps has received major rework, and this way you ensure that nothing old will be left. As usual read the changelog, install instructions and known issues.

Thank you do much for a new realise. The best is that I again have access to my sd card.
I am a noobie and this is my third ROM
I think it is just right
Kudos guys. Will test it for you
Sent from my GT-I9300 using XDA Free mobile app

Help flashing Slimrom build 5
Hi, newbie here I just rooted and flashed my phone to omni ROM experiencing battery drain problems. would like to flash slimkat build 5.
What happens if I wipe system along with dalvik and cache ? Does it affect the drivers in anyway?
Using twrp to flash. Also how is the battery life with slimkat on S3 i9300? Using a goo manager with a recovery image installed would like to remove that as well. I have a backup of stock so Do I really need a recovery image ?

[ROM] [KERNEL] [KITKAT 4.4.2 - KOT49I ] ZTE V970 / V970M [MT6577]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Open Sourcing Mediatek - ZTE v970 ; SoC MT6577
MediaTek Development
Being owner of an Mediatek device, means (most of the times) not having the sourcecode published by the Official vendor.
ZTE never published their ICS / JB sources (they only gave us incompleted, and unbuildable sources).
--> Well ... This is XDA after all .....
WELCOME to KitKat​
Hello Guys !
In this thread you will find my Rom and Kernel for the ZTE v970 / v970m / Smart a18 (Portuguese Single-SIM version)
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
Rom and Kernel INFO:
ROM: KitKat 4.4.2 [ KOT49I ]
Custom Kernel : 3.4.67 [MTK KitKat Kernel]
About the Rom:
Rom based on the Official Release by Motorola XT919 / XT920
Its now Ported to our Device
Starting from v1.2 , most things are now compiled from modified customizable source-code.
Many fixs where required for making work on our Combo-Chip [MT6620 - Responsible for the Radio / GPS / WiFi / etc]
Includes: Brand New Custom KitKat Kernel 3.4.67
Changelogs :
Changelog v Stable 1.2 (February 15 2015)
This is an huge Update, several things on the rom are now compiled from source...
New Kernel
Updated Camera configs / Lens / Hall to be "in-line" with the new rom camera libs.
Rom
Fix : Camera Hall / image / Lens / Sensors (camera now with 8MPX; interpolated )
Fix : Camcorder
Fix : Improved rom, with several things now being compiled from source for our ZTE (no more dirty hacks)
Fix: Some SE Linux Permissions on AROMA installer
General Rom Clean
APKs zipaligned
NOTE: In order to have the proper camera preview, be sure to "tick" on camera settings the "ZSD" Option
NOTE 2: Due to the major changes on the rom itself, it is strongly recommended, that you don't dirty flash.
--> Be sure to backup your things, and make all wipes, then install this build.
Changelog v Stable 1.1 R2(January 27 2015)
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (Europe/USA/ JB Baseband **** Europe/USA 2 (Old ICS Modem) **** Venezuela (MoviStar) Baseband+APN's)
Root Selection (Choose to apply Root, or stay un-rooted)
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
FIX: Headset Driver (Music/ on-Call Volume Buttons)
FIX: Network Data Meter (Mobile Data and Wifi)
FIX: Green LED when Charging > 90% (merged lingfude's patch)
-WIP- FIX: Camera (Improved Camera colours with the new re-compiled camera .blobs, still - WIP - ); also (merged qus1's camera patch)
Changelog v Stable 1.1 (January 25 2015)
--Removed from downloads due to issues--
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (Europe/USA/ JB Baseband and Venezuela (MoviStar) ICS Baseband+APN's)
Root Selection (Choose to apply Root, or stay un-rooted)
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
ADD: Multi-User Support (Settings> Users); Check F.A.Q for more Info
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
FIX: Headset Driver (Music/ on-Call Volume Buttons)
FIX: Network Data Meter (Mobile Data and Wifi)
FIX: Green LED when Charging > 90% (merged lingfude's patch)
-WIP- FIX: Camera (Improved Camera colours with the new re-compiled camera .blobs, still - WIP - ); also (merged qus1's camera patch)
Changelog v Stable 1.0 (December 18 2014)
FIX: Bluetooth (thanks qus)
FIX: SIM Management (now working, and available on Settings)
Added: MTK Eng. Mode on Settings
Added: CPU Performance Control on Settings
Added: AOSP Browser (Google replaced AOSP Browser with Chrome since KK Release)
Changelog v Beta 2 (December 11 2014)
AROMA Installer
New Kernel
FIX: Calls under 3G Network (merged patch)
FIX: Camera AF (Auto-Focus)
FIX: "Automatic Time Zone" FC (com.android.phone) error.
FIX: Device Default USB Name (Device name-Mass Storage)
MOD: Modified KK Permissions to allow apps/data to read/write from External SD Card (Google Removed External SD Card acess on KK)
Cleaned: Unused Telephony .blobs
Added: Default KK Music app (was broken, so i didn't added on Beta1)
Added: modified HOSTs (no more adds from apps spaming you...)
Added: CPU Governor : SmartAss V2 (modified for Dual-core ARM)
Added: CPU Governor : PegasusQ (modified for DUAL-Core ARM)
Changelog v Beta 1 (November 29 2014)
First Beta Release
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART / Dalvik
- FM Radio
- GPS
- Wifi and Wifi Theter
- Bluetooth
- Sensors
- LED's
- Camera / Camcorder
- Pretty much everything is working just fine ...
Needs Improvements:
- You Tell me
GPL Compliance:
​
Kernel 3.4.67 KK
https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
The MT6620 Combo-Chip Patchs can of course be used by enyone else trying to work on another device with the same SoC and Combo-Chip,
--> Just show some Humanity and give credits for the work i made ...
I Don't support KANGS!
So please Show some respect, when using my commits and patchs, as well as the commits i added from other Dev's (with proper credits/ git authorization)
Fail to comply and i will drop this project
Credits:
superdragonpt
qus1 , for the initial Help / RAW Original Motorola Rom / Being an nice guy
I would also like to thank:
bgcngm , for the MTK unpack / repack kernel scripts
lingfude , for the original GT818B Driver work, on the old JB Kernel --> Driver backported to this KK build / Auto-time zone fix
Christopher83, for Linaro Toolchains and Dynamic management of dirty page writebacks
amarullz, for the awesome Aroma Installer
Chainfire, for the SuperSU
XDA:DevDB Information
[ROM] [KERNEL] [KITKAT KOT49I ] ZTE V970 / V970M [MT6577], ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP / MTK
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2014-12-18
Beta Release Date: 2014-11-29
Created 2014-11-29
Last Updated 2015-03-21

How to Install / Requirements
Requirements:
- New CWM or TWRP Recovery ( In The Downloads Section)
--> I Recommend TWRP
- Extended Internal UserData Partition (due to the new KK fstab, the internal Memory can't be mounted)
(Users with stock Partition Layout, can still flash this rom, however you'll have only 500MB of userdata)
Installation / Flashing Procedure:
- Put the rom on the EXTERNAL SD Card
- FULL Wipes are mandatory (Cache/dalvik/Data)
- Flash the ROM
Since Rom Build Stable 1.1: You have an customizable AROMA Installer:
Choose Single/ Dual SIM
Choose BaseBands Modems
Choose to Root/ Stay un-rooted
Downloads:
Downloads are on XDA DevDB
or
On my Dev-Host
KitKat_ZTE_v970_Stable_1.2.zip - 297.48 MB
On my AndroidFileHost
https://www.androidfilehost.com/?fid=95916177934534755
Have Funn

Kernel Goodies / INFO
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
pegasusq (Add on Beta2)
smartassv2 (Add on Beta2)
Sakuractive (Add on Stable 1.1)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
sio (Add on Stable 1.1)
row (Add on Stable 1.1)
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Minimum Readahead 32 Kb / Maximum Readahead 1024Kb
Dynamic management of dirty page writebacks
You can check all the Custom Changes on my GitHub Repo

F.A.Q
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
OR --> Settings > MTK Eng. Mode ( added on Stable 1.0)
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard (~2GB) can´t be used as is not visible due to the new KitKat fstab (partition table)
Q: I have the Extended Userdata Partition Layout, do i need to flash any disabled Internal SDCard?
A: NO, There's nothing you need to do or flash
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s) :fingers-crossed:

Recovery
Is the recovery touch? My power button doesn't work. Thanks in advance

YEAYY!! Finally!! 4.4 for zte v970!!
THANKS BRO!! all the best
Downloading atm... will reply with my feedback
1st thing, Recovery when you put to reboot he go to the main menu of the recovery ALL THE TIME...
2nd i made all the steps and went well but in this ROM i cant get the expandable storage, with the previous roms i always got the expandable storage but with this one dont :\
any help on that?
3rd i made the expandable thing to my mobile, and i found 1 issue! when you made a call you CANT HEAR ANYTHING but the call IS MADE STILL i made a backup before doing the file for expand, i restored and now is fine the sound...
3rd a) i found out that if you put network to 2G the sound can be heard on the speaker when you made a call

StuffiLike said:
Is the recovery touch? My power button doesn't work. Thanks in advance
Click to expand...
Click to collapse
Yes, it is the recovery Touch.
I'm testing this rom, at the moment is going very good and smooth! Will edit later if i find any bugs.
Great work and thanks!

Thank you, good job.
If the file is copied platform.xml to etc/permissions/platform.xml you will be able to install applications to the SD card.
View attachment platform.7z

Hi
I'll be uploading an new recovery ( Twrp ) tomorrow, since cwm can be an buggy sometimes on KK. ( reboot doesn't work sometimes on recovery)
Edit: I can confirm that on calls, on 3G you cant hear the other person (Edit the OP with this info)
On 2G calls works just fine
Regards, have funn

It's very laggy in my ZTE.
Am I the only one?
EDIT: Not laggy now, all is correct. Thank you superdragon!

Juanjose1 said:
It's very laggy in my ZTE.
Am I the only one?
EDIT: Not laggy now, all is correct. Thank you superdragon!
Click to expand...
Click to collapse
No problem haha
It's actually as smoother as JB4.1 or even slightly better.
--> KitKat uses less RAM (any 512MB RAM Phone can run it just fine), you'll see that KK gives you more free Ram, than any JB/ICS Rom.
Regards
EDIT: F.A.Q. and Kernel Features added on OP and following posts...
EDIT 2: New TWRP Recovery added (Its better than CWM ...)

Yes, KK's very stable on my devive(512mb ram). Compared to JB 4.1/4.2, it give more free ram. Don't lags, don't crashes. Amazing!!
Many thanks to superdragonpt you are great!!

yournametv said:
Yes, KK's very stable on my devive(512mb ram). Compared to JB 4.1/4.2, it give more free ram. Don't lags, don't crashes. Amazing!!
Many thanks to superdragonpt you are great!!
Click to expand...
Click to collapse
Hi Yournametv
Yes KitKat runs very good on 512MB, i know, becouse i have another thread, Rom KitKat for micromax a110, and that phone only haves 512MB. and runs smooth
This is still "Beta" , becouse its the first release, but im my opinion, the rom, runs great.
I've been testing this rom for some days, and no big issues.
Please, feel free to share you feedback about the rom, im very Curious to know how's it runs on 512MB.
If you play any heavy game (RAM consuming) please share your feedback here.
Also try to play heavy games, that didn't worked on ICS/JB, KK is more light ...
EDIT: One of the bugs, seems to be fixed: Calls on 3G, i'll post later an patch for you all
Regards

thanks for bringing kitkat to this device
this rom is awesome for 512 ram device, after install full apps it left more 200mb free of ram, that was impossible in JB ,
I could moothly surfing heavy website in chrome, switch moothly to other mutitasking apps, I've never ever done it in lewa or JB. this rom make me love my phone more,
could you make a option to choose which sim to be used in 3nd message/dialer apps please? thanks in advance :victory:

BIg Games
Works fine with ''big games'' :good: . Tested:
- Boom Beach
- Candy Crush Soda Saga
- Clash of Clans
Thank you Superdragon!
EDIT: I'm in ZTE Grand XM (1GB RAM), 512 MB to play xD

calls under 3G Network
Ok , i heavly tested the new patch yesterday, and its now fixed.
Just bare with me, i'll upload the patch, as soon as i find some free time.
Im the time being, you can switch to 2G to make calls.
Regards

No sound during calls
Hi all,
I've just installed this ROM and (as for your previous ROM'S for v970) I want to congratulate (and thank) you on your work, the ROM's are pretty stable and smooth.
However, in this ROM I'm faced with an annoying problem in which when I make/receive calls the other person can hear me but I can't hear anything. I already tested the recording app so it is not certainly an hardware problem. I installed the ROM with TWRP and on the second boot installed superSU as instructed. I got no error messages whatsoever and all the other features seems to work as announced.
I have the v970 version with a single SIM (tmn version). Does anyone has/solved this problem?
Sorry, did not read all the posts previously, forcing the 2G solved it. My bad. Keep up the good work.
Thanks,
Best regards,
André Farinha

Patch 3G calls
Hi
You can now, download the patch for 3G calls
Check download section.
In recovery:
wipe cache and Dalvik
Flash the patch
enjoy
Regards

superdragonpt said:
Hi
You can now, download the patch for 3G calls
Check download section.
In recovery:
wipe cache and Dalvik
Flash the patch
enjoy
Regards
Click to expand...
Click to collapse
Tested patch to 3G, Works fine!
Thank you superdragon to port KitKat for this device; it was forgotten..

I want to congratulate you for great job!.
Droidvpn and troidvpn not working by problem "Tun Socket"
No problem for the moments, ty!

Marvel OS Q Rom V-1 For J600X By AL-Noman

-Marvel OS Q Rom V-1 -
NOTE - THIS ROM IS ONLY FOR J600X
Developer 1 - Abdullah AL-Noman
From - Bangladesh
--- Some Information ---
Based On : Galaxy J600GD
Android Version : 10 . 32 Bit
One Ui Version : 2.0
---------- Rom Features ----------
-- Debloated
-- Deknoxed
-- Deodexed
-- All Stock Features Like As Wifi,Camera ,Bluetooth,Double Sim Is Working.
-- Added Missing Important Application
-- Added Applock
-- Added S Secure
-- App Locking And App Masking Working
-- Call Record Supported
-- Game Tools Working
-- Latest Camera Features
-- Added Camera Watermark Support
-- Added Camera Screen Optimization
-- Added Camera Shot Suggestions
-- Added Camera Flaw Detection
-- Added Camera 2× Goom
-- Added Camera Food Mode
-- Added Rear Camera Selfie
-- Added Screenshot On Toggle
-- Added Smart Capture
-- Added Screen Recording On Toggle
-- Added Lte Only Option
-- Lte On 4G network Is Enabled
-- Added New Font
-- Samsung Face Unlock Working
-- Added Samsung HoneyBoard
-- Adb Enabled
-- FRP Lock Removed
-- Root Supported
-- Stable Magisk 20.3 Included
-- New Bootlogo Included
-- Stock Oreo Boot Animation Included
-- Disable signature verification allowing modification/execution of signed system apps.
-- Enable signature spoofing app permission.
-- Bypass Samsung Knox trip protection, only confirmed working for secure folder.
-- Support Secure Folder
-- Volte
-- Added Language Pack For Keyboard
-- Fixed Call Delay
-- Fixed Black Screen After Call
-- Added Charging Info Showing On Lock Screen .
-- Added Multi Screen Mode
-- Added Dynamic Lock Screen
-- Fix Volte For Another Countries Join Group And Downlod This File And Flas
https://t.me/smexynos7870/16422
Rom Version : 01
Bug : Check And Report Me .
--- Kernel Information ---
-- Name : Simple Kernel
-- Author : Astrako
---- Dontation ----
Donation Is Required But Not For Me. If You Fill Good After Use My Rom Then Please Help Helplessness People
-- Telegram Group --
https://t.me/smexynos7870
--- Rom Link - Mega -
https://mega.nz/file/PaBhTAhQ#TFS8mHaZUXJuzSdCJ0fMr3ihkIjkQ3D44yPxM5U5Ewc
XDA:DevDB Information
Marvel OS Q Rom V-1 For J600X By AL-Noman, ROM for the Samsung Galaxy J6
Contributors
Abdullah AL-Noman
Source Code: https://github.com/Astrako/android_kernel_samsung_exynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Bootloader
Version Information
Status: Stable
Created 2020-09-21
Last Updated 2020-09-22

Well done! Boi carry on I really appreciate the smoothness of this great ROM.

Upload to Gdrive please!

I tried so many roms so far for samsung j600g ! But this one is the best clean,small size and voLte works no call drops! Root access wifi calling and latest security patch !!awesome thank you

Just installed the rom and I don't see magisk anywhere

Hi, I am new to J6 rooting world, have had past experiences with S2/S3 and A5. I have a J600G phone which is having latest Android 10.
Can i use TWRP to get custom recovery and then flash this ROM?
I noticed that it is 64 bit, will it work on J600G?
Any specific version of TWRP to be used?
Any specific instructions or things to keep in mind.
Would appreciate suggestions before i getting into it.

Gapps কোনটা ব্যবহার করবো?৩২ বিট এরটা না ৬৪ বিট এর টা?
Mod translation via GT: Which Gapps should I use? 32 bit or 64 bit?

[ROM][ONEUI 2.1][10.0][A530F/A530W/A730F] QDroid V2.5

I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, and want me to continue working on this projet, Feel free to buy me a cup of coffee @paypal
Introducing QDroid - ONEUI 2.1 For Galaxy A8/A8+ 2018 ONLY FOR A530F/A530W/A730F​
Some information you should know..
This is a full A7 2018 port with Android Version 10
This ROM is made with heavy collaboration from @corsicanu and @ananjaser1211 make sure to give them coffee.
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
Any sort of File Kanging will be reported without hesitation.
Release Note :-
After a battle that took months on end, im able to deliver you this project in a state were i can deem it as "Daily Driver", This was no easy task, Android Q has changed alot and a skin such as oneui 2.0 was never intended to run on this device, But here we are.
As the nature of "Initial releases" tend to be, expect Bugs, i wrote down the ones i can see and that are actual issues that can affect people. so make sure to read them.
The F.A.Q and Notes page is more important than this entire post. it details stuff that you might need to do in order to avoid issues and not to look stupid reporting issues that otherwise wont happen.
Finally, This rom is only possible due to a TON of contributions from my friends @corsicanu and @ananjaser1211 without them you probably wouldn't have seen this ROM.
I have also included the majority of improvements , Aroma and edits from @corsicanu which im sure you guys are familiar with already.
HWC fix on this device was only possible by @ananjaser1211, without him I couldn't have been proceed with the camera fix.
Alright enough chit-chat. Enjoy the ROM. and do let me know in the thread how it is going on your end.
FEATURES
- Android 10.0
- Odex System
- Slightly debloated
- Zipaligned
- Optimized for battery and performance
- Full Samsung OneUI 2.1 Experience
- Magisk Supported
- RMM PrePatched
- Based on A750FNXXS4CTH3
- And all the goodies Android Q / OneUI 2 Brings
- Contains all features from A7 2018 minus hardware specific ones
- All the original features are present (Wifi,Bluetooth, basic camera etc)
QDroid Port Features :-
- Always On Display(Aod Touch, Variable brightness)
- Bluelight Filter
- Samsung BixbyVision
- Samsung DolbyAtmos
- DE-Knoxed and disabled Additional samsung root prevention and security spams
- Full OXM setup with Many samsung supported countries
- Goodlock Pack + Patched Versions
- Heavly optimised for A8/A8+
- Debloated via Aroma (Email, Calculator, Recorder, etc)
- Samsung Avatar
- Samsung Screen Video recorder
- Samsung Smart View
- Digital Wellbeing
- Dual Messenger
- And many more additions
Quantum Quack Kernel :-
- Upstreamed Linux 4.4.177
- WireGuard Support
- OC Little to 1.7Ghz
- UC big/Little to 200/500MHz
- DriveDriod Support
- Multi CPU Governors
- Multi I/O Schedulers
- Multi TCP Algorithms
- Wakelock Blocker v1.1
- Fsync Toggle on/off
- CRC Check Toggle on/off
- Disabled samsung security functions
- SeLinux Permissive
- State Notifier
- Other minor improvments
INSTALL STEPS
Note: We Don't need Treble implementation for this project
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
Setup your rom and READ the F.A.Q for more information.
BUGS
- NFC doesn't work
- Samsung Video Stablisation
- Torch Intensity Control
CREDITS
- @corsicanu and @ananjaser1211 For a ton of support with this Project.
- @TaifAljaloo and @somadsul for always supporting and being nice.
- @soulr344 and @yash92duster for all support and improvement towards project.
- Special thanks to my EliteTeam and TeamExyKings for always being supporting
- If you helped in this rom and i forgot you, Send a PM or contact on Telegram
Downloads. Changelogs , F.A.Qs below​
XDA:DevDB Information
QDroid V2.5, ROM for the Samsung Galaxy A8+ (2018)
Kernel Sources: https://github.com/prashantpaddune/android_kernel_samsung_jackpotlte
Contributors
prashantp01, Ananjaser1211, Corsicanu
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v2.5
Created 2020-10-12
Last Updated 2020-10-12

DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
QDroid V2.5 based on A7 2018 port [LATEST]
Google Drive : Download
QDroid V2.0 based on A7 2018 port
Google Drive : Download
QDroid V1.0 based on A7 2018 port
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V2.5
- OneUI 2.1
- Fixed Offline charging
- Fixed Force reboots on overcharge
- Added Dolby on Speaker
- Slightly Debloated the base
- Added Applock support
- Enabled few csc tweaks (like LTE mode etc..)
- Switched to HoneyBoard Keyboard
- Dual messenger on all apps
V2.0
- Improve WiFi Stability by Fixing Bluetooth issues
- Fixed Connectivity issues on 2.4ghz Router
- Added new OMC package for new Countries
- Reduced buffer crash when using Camera to reduce its Lag
- Make camera more stable when using 3rd party apps
- Fixed a bug that caused charging to stall in some scenarios
- Fixed Power profiles to reduce Heat and power draw
- Slightly debloated the base
- Fixed Random Glitches in UI
- Boot time decreased
- Overall improved UI Performance / Doze
V1.0
-initial release

FAQ
Good idea to read this F.A.Q While the rom is installing
Q : Do I need to Treble my Device before installing this rom ?
A : No need to Treble your Device, if you already have the treble implementation, make sure you wipe the Vendor partiton.
Q : I have Symlinks error / Rom wont go past splash
A : As the AROMA Told you, don't pick all the bloat. and use default settings if you don't know otherwise
Q : My phone does NOT boot help pls
A : Ensure you have LATEST bootloader and modem installed, did all the wipes, and did your house chores. Make sure your device is supported from the given thread. If you had Treble, Wipe your Vendor partition.
Q : Device is running too hot
A : If it was just set-up, Give it time and make sure everything is up-to-date.

Awesome Job. Thanks for your hard work

Great work mate. And best of luck

Trank you

Thanks

prashantp01 said:
FAQ
Good idea to read this F.A.Q While the rom is installing
Q : Do I need to Treble my Device before installing this rom ?
A : No need to Treble your Device, if you already have the treble implementation, make sure you wipe the Vendor partiton.
Q : I have Symlinks error / Rom wont go past splash
A : As the AROMA Told you, don't pick all the bloat. and use default settings if you don't know otherwise
Q : My phone does NOT boot help pls
A : Ensure you have LATEST bootloader and modem installed, did all the wipes, and did your house chores. Make sure your device is supported from the given thread. If you had Treble, Wipe your Vendor partition.
Q : Device is running too hot
A : If it was just set-up, Give it time and make sure everything is up-to-date.
Click to expand...
Click to collapse
Thanks bro, armin is gay

CHANGELOG V2.0
V2.0
- Improve WiFi Stability by Fixing Bluetooth issues
- Fixed Connectivity issues on 2.4ghz Router
- Added new OMC package for new Countries
- Reduced buffer crash when using Camera to reduce its Lag
- Make camera more stable when using 3rd party apps
- Fixed a bug that caused charging to stall in some scenarios
- Fixed Power profiles to reduce Heat and power draw
- Slightly debloated the base
- Fixed Random Glitches in UI
- Boot time decreased
- Overall improved UI Performance / Doze
Note: Clean installation is Highly Recommended
Google Drive : Download

Hello! During these 4 days I caught 2 reboots. Otherwise, everything works fine. Thanks!

I had a reboot twice as well. everything works fain except my gear fit2.I tried all the older plugins without success

Yep, Galaxy Wearable not working. Thanks to the developer by the way, great job!

ilcik001 said:
I had a reboot twice as well. everything works fain except my gear fit2.I tried all the older plugins without success
Click to expand...
Click to collapse
Grab last_kmsg, just after it reboot and before it boots Read thread about how to grab those logs

San4eL said:
Hello! During these 4 days I caught 2 reboots. Otherwise, everything works fine. Thanks!
Click to expand...
Click to collapse
Read the thread about debugging and grab logs

Congratulations on the port¡
Few questions I have: Safety Net Passes? Edge Panel support (will it ever)?, Secured Folder Works? Will NFC get a fix in any updates?

qounik said:
Congratulations on the port¡
Few questions I have: Safety Net Passes? Edge Panel support (will it ever)?, Secured Folder Works? Will NFC get a fix in any updates?
Click to expand...
Click to collapse
Safetynet passes, rest of the features will see

Hey can anyone confirm if Google Pay (India) works on this build? I have seen some people say that SafetyNet passes for their device but Banking Apps don't work (on A8+ devices with GSIs). Do they work on the OneUI version?
Thanks in advance!

front camera does not work
V2.5

SRIHARI_GUY said:
Hey can anyone confirm if Google Pay (India) works on this build? I have seen some people say that SafetyNet passes for their device but Banking Apps don't work (on A8+ devices with GSIs). Do they work on the OneUI version?
Thanks in advance!
Click to expand...
Click to collapse
Did you enabled Magisk Hide from settings ?

reno96 said:
front camera does not work
V2.5
Click to expand...
Click to collapse
Did you clean flash ? If yes, then grab adb logs when it doesn't work

Marvel OS Q Port V-2 For J600X

----------Marvel OS V-2 By AL-Noman-----------
NOTE - THIS ROM IS ONLY FOR J600X
--- Some Information ---
Based On : Galaxy J600GD
Android Version : 10 . 32 Bit
One Ui Version : 2.0
---------- Rom Features ----------
-- Debloated
-- Deknoxed
-- Half Deodexed
-- All Stock Features Like As Wifi,Camera
,Bluetooth,Double Sim Is Working.
-- Added Missing Important Application
-- Applock
-- S Secure
-- Call Record Supported
-- Game Tools Working
-- Latest Camera Features
-- Camera Watermark Support
-- Camera Screen Optimization
-- Camera Shot Suggestions
-- Camera Flaw Detection
-- Camera 2× Zoom
-- Camera Food Mode
-- Rear Camera Selfie
-- Screenshot On Toggle
-- Smart Capture
-- Screen Recording On Toggle
-- Lte Only Option
-- Lte On 4G network Is Enabled
-- New Font
-- Samsung Face Unlock
-- Added Samsung HoneyBoard
-- Adb Enabled
-- FRP Lock Removed
-- Root Supported
-- Stable Magisk 20.3 Included
-- Disable signature verification allowing
modification/execution of signed system apps.
-- Bypass Samsung Knox trip protection, only
confirmed working for secure folder.
-- Support Secure Folder
-- Added Multi Omc - Auto Generated By Default
Mps Code
-- Language Pack For Keyboard
-- Patced Dual Messenger
-- Charging Info Showing On Lock Screen .
-- Multi Screen Mode
-- Lock Screen Stories
--Places Option On Dial Menu
--Caller ID And Spam Protection
--Mobile Data Switch Menu On Power Option
--VoLte For Bangladesh
--Date Of First Call Made Option On Settings
--Third Party Camera Working
-- More OMC Feature ..
--- Kernel Information ---
-- Name : Simple Kernel
- -----Note - You can use Pruh Kernel V-5 Power
Saver Version For Saving Battery And Better
Charging.
---- Dontation ----
Donation Is Required But Not For Me. If You Fill Good After Use My Rom Then Please Help Helplessness People
-- For Any Help Join US On Telegram Group --
https://t.me/smexynos7870
-- Rom Link - Mega --
https://mega.nz/file/3b4BFCAL#2q90hfNCnxyUJIHnqAvjnQ1ljXRZM69N-s9OoUKa0vw
XDA:DevDB Information
Marvel OS Q Port V-2 For J600X, ROM for the Samsung Galaxy J6
Contributors
Abdullah AL-Noman
Source Code: https://github.com/Astrako/android_kernel_samsung_exynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Bootloader
Version Information
Status: Stable
Created 2020-10-18
Last Updated 2020-10-18

Question: why make another thread for v2? Can i do a dirty flash over v1?

please release v3 update and fix some bugs

System ui crashes randomly and the phone has to be restarted to make it work again, please fix it, aside from that the rom works great