help n8020 touch dead - Galaxy Note 10.1 Q&A, Help & Troubleshooting

anyone can help me in my note n8020 after several flash my touch response nothing. the s pen is working perfectly but the touch is dead.
history:
my note is in JB rom v2 rom and update it to latest firmware of kitkat N8020XXUDNE4 via odin >> it was successfull
i try to upgrade it in reflection kitkat first i flash latest philz cwm v6 >success
upgrade in reflection > success, but that rom has a bug it seems to have no signal in sim. so i flash it back to official which is N8020XXUDNE4 again, and it was success and then after reboot my note is not responding in touch but on S pen it is.
i hope anyone master here can help me in my problem. or do i need to go to hardware check up. please help me

please master here help me regarding this issue in my note please someone.
i tried all possible way i return it back to JB and flash again to official, all was success except for touch not respond, i tried factory and the same issue again.
someone can tell me if i missed root file or files related to touch program can anyone spare me knowledge abouth this. need it badly help me please

can anyone help me finding solution here please

Related

[Q] Samsung Galaxy note GT N7000 not booting

Hello every one on this forum, I need your help regarding my Samsung Galaxy note GT N7000, I woke up yesterday to find out that my phone need some update and i press ok and I went to the bathroom to get ready for work and by the time i came back my phone as stop working completely and I tried to reboot it but to no avail, I need your help pls.
Thanks
were you on gingerbread and what about root? any custom rom? can you still get into recovery? Or did you have clockwork mod? i wonder if it was upgrading to ICS and your phone died? Just some things that might help narrow down a bit.
Galaxy Note not booting after firmware update
Hi,
The same thing happened to me today. My phone indicated that an update was required. When I proceeded to install, the phone is stuck at the SAMSUNG logo.
My phone is not rooted. About a few weeks ago I had upgraded from GB to ICS.
Any help would be much appreciated. Thanks!
Facing the same problem
Hi all,
I am facing the same problem since this morning. I have not rooted my phone. Recently I upgraded my Galaxy Note from Gingerbread to ICS 4.0.3. This morning, I upgraded the firmware, as I had done this in the past as well, I didn't think it may lead to any problem. But since then, the phone starts and shows Samsung prompt. Is it because of any bug in the latest update? Does anyone know what to do in this situation?
I am facing the same problem, the Samsung logo keeps glowing off and on after the boot chime plays.
Does any one have any clue about this? I think its happening to India users who got this update.
Edit: I am unable to go into the recovery screen as well. The green droid shows, some loading happens(tries to?) in the bar below and the screen turns off and if I keep holding the buttons the same cycle repeats. Leaving them at any point leads to the Samsung glowing logo and no boot!
Another one bites the dust
Faced the same problem yesterday...running around to get my contactsrescued...even the authorized service centres are only assuring flashing it -0 as if it is a big obligation
Need someone to access dram... jtag to a usb mode...going to try at heera panna & manish market tomoro - both in Mumbai
Lts c
If anyone can help - kindly upload post
Found the solution!!!
Hi Guys, I've found the solution.
Edit: Since, I received queries from many people, I would like to know from the advanced/experienced members if the solution I am suggesting is absolutely right or not, and if it could lead to any problem. My phone is working fine, I haven't lost any data.
The solution:
1. Download the stable ICS version released in May.
2. Install it manually using the ODIN settings.
Guys, please help us out, let us know your opinion.
add me to list
using just the stock rom
this update flashed on the notification and after installation doesnt go beyond the
boot screen
Note , India

Urgent Assistance Needed! Kocaso M9100 (FIXED)

Hi I have a Kocaso M9100 and I flashed the rom from here http://forum.xda-developers.com/showthread.php?t=2189640.
Ive done this but now my screen doesn't work, nor my wifi. I had backed up my stock image but had backed it up to internal memory so it got wiped when i flash the CM rom. I have no idea what the specs are for my touch screen or g sensor to find a compatibility patch. Please can someone help me I really need the stock flash image to return the device back to stock or at least the correct compatibility patch to make the screen work again..
EDIT:
I emailed the company and they sent me an email to the firmware I needed.
Click Here for the list of firmwares for the Kocaso M9100. Be sure to check the Serieal Number Checklist.txt to ensure that you download the right firmware.
Once done, click here for the instructions to install it. Basically you have to make a bootable sdcard.
Hope this helps all the other people out there like me who screwed up.

[Q] How to unroot for guaranty?

I want to use guaranty for my tablet so What should I do to turn my rooted device to official state.
Full story:
Touch screen stopped working and I can work only with pen. I searched web and tried some solutions such as factory reset, but didn't help.
So i think it's a hardware issue and I want to turn it in for repair. But the problem is I've rooted my device with odin(probably with custom Rom) and my binary counters shows 2.
Please guide me how to roll back to official state
P.S. If anyone can help to solve the touch screen issue, I prefer to have my device rooted.
Download and run Triangle |Away from the Play store .
Run TA
Boot to download mode flash stock rom for your phone reboot factory reset.
ardalan_o said:
I want to use guaranty for my tablet so What should I do to turn my rooted device to official state.
Full story:
Touch screen stopped working and I can work only with pen. I searched web and tried some solutions such as factory reset, but didn't help.
So i think it's a hardware issue and I want to turn it in for repair. But the problem is I've rooted my device with odin(probably with custom Rom) and my binary counters shows 2.
Please guide me how to roll back to official state
P.S. If anyone can help to solve the touch screen issue, I prefer to have my device rooted.
Click to expand...
Click to collapse
Post # 2 covers the restore but I have seen many posters with pen issue just like yours and it appears that you could have caused the problem somewhere in your Rooting and or the installation of the custom ROM.
Do a search there are lots of people with the same condition and I believe it is rooting and or user MOD's related.
Good luck.
.
Tanx JJegan, It worked smoothly:victory:.
But still I have the touch screen issue kkretch .
Now I am realy convinced that it is hardware. but thank you for the tip man.

[Q] touch screen issues

Hi Guys ,I own a Samsung galaxy note 2.I recently changed the ROM and noticed the touch screen is no longer working. The S pen does work.
Please I need suggestions on how to fix . I suspect a bug but I am trying to be careful so I don't cause other issues.
Thanks.
Flash stock rom of your device, root and make sure you're flashing the correct rom for your device and/or doing the correct methods. Make sure you have your IEMI backed up before flashing.
bobodoec said:
Hi Guys ,I own a Samsung galaxy note 2.I recently changed the ROM and noticed the touch screen is no longer working. The S pen does work.
Please I need suggestions on how to fix . I suspect a bug but I am trying to be careful so I don't cause other issues.
Thanks.
Click to expand...
Click to collapse
can you try a factory reset?

[Q] Please help (N7100)

Hi Team,
I need your help. Recently I have flashed DN3 4RC on my N7100. Everything is working fine but I have one question. I want to go back to official 4.3 firmware. Can you please guide me how I can do it. My Binary Counter has also been increased to 10. I tried triangle away almost all the version but nothing happens to reset the counter.
Please help me developers
nikhilkumar2005 said:
Hi Team,
I need your help. Recently I have flashed DN3 4RC on my N7100. Everything is working fine but I have one question. I want to go back to official 4.3 firmware. Can you please guide me how I can do it. My Binary Counter has also been increased to 10. I tried triangle away almost all the version but nothing happens to reset the counter.
Please help me developers
Click to expand...
Click to collapse
Before you perform any changes PLS get informed about how to BACKUP your EFS. Friend of mine lost is while changing roms and there is no good chance to restore it without a valid backup.
May be some owner of the same device know how to get back to stock best.
Hi
Am on DN3 5.2 and unable to switch on power saver mode (not the Ultra Saving Mode). plz help.....

Categories

Resources