Hello every one on this forum, I need your help regarding my Samsung Galaxy note GT N7000, I woke up yesterday to find out that my phone need some update and i press ok and I went to the bathroom to get ready for work and by the time i came back my phone as stop working completely and I tried to reboot it but to no avail, I need your help pls.
Thanks
were you on gingerbread and what about root? any custom rom? can you still get into recovery? Or did you have clockwork mod? i wonder if it was upgrading to ICS and your phone died? Just some things that might help narrow down a bit.
Galaxy Note not booting after firmware update
Hi,
The same thing happened to me today. My phone indicated that an update was required. When I proceeded to install, the phone is stuck at the SAMSUNG logo.
My phone is not rooted. About a few weeks ago I had upgraded from GB to ICS.
Any help would be much appreciated. Thanks!
Facing the same problem
Hi all,
I am facing the same problem since this morning. I have not rooted my phone. Recently I upgraded my Galaxy Note from Gingerbread to ICS 4.0.3. This morning, I upgraded the firmware, as I had done this in the past as well, I didn't think it may lead to any problem. But since then, the phone starts and shows Samsung prompt. Is it because of any bug in the latest update? Does anyone know what to do in this situation?
I am facing the same problem, the Samsung logo keeps glowing off and on after the boot chime plays.
Does any one have any clue about this? I think its happening to India users who got this update.
Edit: I am unable to go into the recovery screen as well. The green droid shows, some loading happens(tries to?) in the bar below and the screen turns off and if I keep holding the buttons the same cycle repeats. Leaving them at any point leads to the Samsung glowing logo and no boot!
Another one bites the dust
Faced the same problem yesterday...running around to get my contactsrescued...even the authorized service centres are only assuring flashing it -0 as if it is a big obligation
Need someone to access dram... jtag to a usb mode...going to try at heera panna & manish market tomoro - both in Mumbai
Lts c
If anyone can help - kindly upload post
Found the solution!!!
Hi Guys, I've found the solution.
Edit: Since, I received queries from many people, I would like to know from the advanced/experienced members if the solution I am suggesting is absolutely right or not, and if it could lead to any problem. My phone is working fine, I haven't lost any data.
The solution:
1. Download the stable ICS version released in May.
2. Install it manually using the ODIN settings.
Guys, please help us out, let us know your opinion.
add me to list
using just the stock rom
this update flashed on the notification and after installation doesnt go beyond the
boot screen
Note , India
Related
I had some time available today for a change and so attempted to do a long overdue update to jelly bean. Catastrophe! I dont know really where to start trying to solve the problem though I have spent my entire day off (sic) (NOT SICK!) prior to an all night 12 hour slog at work...not happy...no phone and I'm on call...ooops So now you know what a bit of a prat I am perhaps someone out there in XDA land can forgive me and point me in the direction of help pages or suggestions to get me communicating again.....please...
I rooted and unlocked my phone a long time ago and have not been back to change things for ages so anything I knew back then isn't worth knowing. I've been trying to resolve a boot loop after trying to follow :
http://www.android.gs/update-htc-sensation-cm10-1-rc2-jelly-bean-4-2-2/
i followed these instructions carefully and the only issue I had with the files to install was that the CM10.1 file wasn't available so I went with 10.2
so the first question would be....is this file incompatible. I assumed it was just the next release with some improvements?
I have ClockworkMod Recovery installed and have tried endless times to get this thinkg to work but even dropping back to an earlier version of cyanogen mod 9 my phone loops shortly after loading the cyanogen screens....
Any pointers from you guys would be a great help. I'm sure you're going to want more information from me so I'll stop here and hope someone responds
all the best and thank you in antcipation
Hi,
As a general rule recoveries that work with cm9 do not work with cm 10.1.
Ensure that you have the proper recovery version and should you still have the issue, please ask here
All the best !!
Hi, I'm sorry if this has been asked before, basically a few weeks ago I was having problems with my Tab 2 p3110, it just wasn't running right. At around the same time I ordered an EZCAST hdmi device for my tv.
Well, I used Odin and cwm and taught myself how to upgrade to kitkat withCM11 nightlies, great stuff, fixed the issues I was having.
Then my tv dongle arrived, the one feature I wanted to use more than anything was screen mirror/AirPlay. No you can imagine my dismay when I couldn't even find the option in cm11, I found cast screen but it wouldn't work.
So, having tried several nightlies hoping the problem would be fixed I settled on reinstalling the stock 4.2.2 rom following the instructions on here. It bricked my tab 2 but I managed to get it going again and reinstalled the stock rom after several days of trying.
All this to find the screen mirror option was not available on the stock rom!! I can't figure out why but thought, maybe, an upgrade was needed, so I headed to the update tab to be told that my device was modified, updates are not available!
To be honest I'm ready to throw it in the lake behind my house I'm that frustrated, does anyone have any suggestions on getting screen mirroring working?
http://live.samsung-updates.com/index.php?device=GT-P3110
Here... get the clean firmware here. It will give a pure system that won't trip the modification check.
It will also give you the factory recovery system.
Look up the p311x PIT file and when in odin pick the size that matches your tablet.
If it hangs at boot try doing a factory reset from recovery.
That's what worked for me to allow me to check updates.
I can't say that this will fix screen mirror, since I've never used it or seen the option on my p3113
Sent from my SGH-T999 using Tapatalk
Thanks for that. I can't find my model number on the list, The british one is close and as thats where I live i think i'll give that a go.
Thanks again for your help
Didn't work, still saying that the device has been modified and in download mode shows "count 1"
Any other ideas?
Triangle away?
Sent from my SGH-T999 using Tapatalk
Hey, I use my tablet with the Samsung Smart View ap.
You must have the right samsung tv for it to work and it's not perfect, but it is a nice feature. I stopped updating my tab because this is the most important feature for me.
I rooted my device and have the same issue as you, that's how I came across this thread.
Hi Everyone,
I come to you for a bit of help. I have spent a long time trying to fix this and come for help from you guys.
So I got a little bored with standard Samsung Android on my Note 2 (GT-N7100). Having used Cyanogen before, I decided to try it on the note.
I rooted the device and installed CWM on it no problems. I then loaded CM from a micro usb.
On reboot it just gets what i'd call the "Spinning blue screen of death" where it just has the big blue circle going round until it runs out of battery. After some research I used CWM to clean out the caches etc but it still didn't appear to work. This was using the stable version for my Note 2. I then went on to try other versions and got the same issues. Alas, trying to do a restore didn't work either, as it didn't seem to have all the files.
At this point I am happy to go back to stock Android or indeed CM. I'd just like a phone that works!
My device details:
Model GT-N7100
SSN: -N7100GSMH
Network Provider Virgin UK
Any help appreciated.
Hi all. I know there are quite a few posts with people having a similar problem to this, however none of the solutions mentioned have worked for me. Recently, I updated my phone to JB using Odin 1.85 (I8160XXNF1). All was working fine, and when i recieved a notification saying there was an update available, I updated to a new version, which was also JB 4.1.2 but it changed to I8160XXMG2. Everything still worked fine at this point, though there was still an update available. So, once again, I decided to update it although this time the phone never fully booted, it gets stuck on the boot screen every time (the one saying 'SAMSUNG galaxy Ace 2 GT-I8160' not the animation). I couldn't boot into recovery, only into download mode so I flashed the previous JB (I8160XXNF1) which worked, however this has not resolved the problem and the phone is still stuck on the same screen.
Okay, thanks for reading this, please help if you have any ideas on how to resolve this issue.
TiPEX360 said:
Hi all. I know there are quite a few posts with people having a similar problem to this, however none of the solutions mentioned have worked for me. Recently, I updated my phone to JB using Odin 1.85 (I8160XXNF1). All was working fine, and when i recieved a notification saying there was an update available, I updated to a new version, which was also JB 4.1.2 but it changed to I8160XXMG2. Everything still worked fine at this point, though there was still an update available. So, once again, I decided to update it although this time the phone never fully booted, it gets stuck on the boot screen every time (the one saying 'SAMSUNG galaxy Ace 2 GT-I8160' not the animation). I couldn't boot into recovery, only into download mode so I flashed the previous JB (I8160XXNF1) which worked, however this has not resolved the problem and the phone is still stuck on the same screen.
Okay, thanks for reading this, please help if you have any ideas on how to resolve this issue.
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
I saw you solved your problem so i'm gonna close this thread.
Regards
Edit, Sorry, Can this be moved to Verizon Galaxy S 5 Q&A, Help & Troubleshooting. Thanks in advance.
Hi, I need a little help.
My wifes S5 is rooted via safestrap running on RicksRomv19.5. It seemed to be working great since I purchased it about 2 years ago. Well recently her phone won't come out of 3g, and then her phone keeps randomly turning off and when it restarts it shows a significant loss of battery. I tried replacing the Sim card to no success, it stays in the "Please wait well your phone is being activated." Never completes. So I put the old one back in and it works without 4g. I'm wondering if the Rom and Modem are causing issues being that its still 4.4. I have a replacement battery on the way just in case thats the issue. I'd like to try updating it to 5.0 or higher and upgrade the modem to see if it fixes any of the mentioned issues. I'm fairly capable of flashing and upgrading roms but havent followed any of the S5 stuff since I still use a Note 3. What do I need to do to get it upgraded? Thanks