Related
I would post this under development, but I need 10 posts to do that. So I hope someone will look here to help me out.
So I got the new update yesterday. I have nothing against the stock rom, But it broke my tethering app. I found a way to root my S3. [GUIDE] Root for Jelly Bean OTA ***UPDATED*** - xda-developers
No problem there. I was looking to install a version of Paranoid Android, But using Goomanager this was not an available rom. (Is there one for the S3) I tried a few other roms and they all looked kind of chunky to me. A few had a flicker effect when you went to the home screen (aokp milestone 1 and bean)
Well now i went the route of http://forums.androidcentral.com/ve...-back-clean-factory-stock-update-10-23-a.html And I am back to Factory fresh rom with an unlocked boot loader. If I were to root the factory rom and leave it what would be the effects in the long run, and is there a costume factory rom (Jelly bean) that would solve my problem...
Thanks
Well first, this shouldn't be posted in development because you're nitty releasing anything. So this Is the right spot.
Second, I'm not sure what you're looking for under original development you'll find the AOKP for us. If you want stock jelly bean that logs like AOSP check out beans build 6
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
Well first, this shouldn't be posted in development because you're nitty releasing anything. So this Is the right spot.
Second, I'm not sure what you're looking for under original development you'll find the AOKP for us. If you want stock jelly bean that logs like AOSP check out beans build 6
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Well I guess I would have liked to post in the thread that had the information in the first place. The thread is where he explained the rooting procedure that was not working for me. All steps worked except the last one. So I have to try to ask my questions over here.
Second, Now that I am back to stock rom I just wanted to see if anyone could answer my question about rooting and leaving it...
Third... Is there a paranoid android available for S3
Gotcha! Guess I misunderstood where you wanted to post, my bad. Then rooting and leaving it is fine, no long term effect. I run stock rooted all the time...until I get bored. Also, here us the official AOKP
http://forum.xda-developers.com/showthread.php?p=30456625
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
Gotcha! Guess I misunderstood where you wanted to post, my bad. Then rooting and leaving it is fine, no long term effect. I run stock rooted all the time...until I get bored. Also, here us the official AOKP
http://forum.xda-developers.com/showthread.php?p=30456625
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply's So what you are saying is I can run stock root until there is another update and the worst that will happen is it will break my root?????
Like I said I like how stock functions, but it broke my tethering app. I am still on the unlimited data plan and spent 700.00 for the S3 so i could stay there. kind of a waste of cash now that Foxfi wont work. If I can root then I can use open garden.
If your into the programing part. When using oden to root what does this do..VRALEC.bootchain.tar and then they have you do this one at the end.VRBLK3_Bootchain.tar
If I get answers for these I do have one more that I will post later....
Thanks again
badge 214 said:
Thanks for the reply's So what you are saying is I can run stock root until there is another update and the worst that will happen is it will break my root?????
Like I said I like how stock functions, but it broke my tethering app. I am still on the unlimited data plan and spent 700.00 for the S3 so i could stay there. kind of a waste of cash now that Foxfi wont work. If I can root then I can use open garden.
If your into the programing part. When using oden to root what does this do..VRALEC.bootchain.tar and then they have you do this one at the end.VRBLK3_Bootchain.tar
If I get answers for these I do have one more that I will post later....
Thanks again
Click to expand...
Click to collapse
Yes you can stay stock rooted and if you use voodoo ota keeper you may even keep root after updates.
The reason you have to flash the old insecure boot chain is so you can unlock your boot loader and install recovery, so that you can then root. The only reason you flash the new one at the end is so that to your boot chain matches your ROM. The last party is optional, but it just makes since to have as much matching as possible.
Sent from my SCH-I535 using xda app-developers app
That is great..now to my last question..(a few more like this and I can post directly to the guys thread)
When doing this step I am using TWRP.
Step 4 - Rooting Your Device and Unlocking Your Bootloader
Quote:
Using your custom recovery flash the download you chose above from Step 1 (#3)
Upon exiting your custom recovery to reboot first time, you will be asked if you want to "Disable recovery flash", you MUST select Yes
After reboot, your ROM will now be fully rooted, have a custom recovery, and/or your bootloader unlocked as well
after flashing SuperSU + Unlocked Bootloader I go to reboot but it does not ask about the Disabling of the recovery flash. Should I be worried or should I maybe flash back the Factory bootloader with ODEN after I am rooted??
Sadly, this seems to be the most active thread for Paranoid Android. Currently that thread's original Dev is MIA and the last build he made was based on 2.54 (current PA is 2.99). Another Dev ported 2.99 but people are reporting issues with it. I ran the 2.54 one for a couple of weeks and it wasn't terrible.
http://forum.xda-developers.com/showthread.php?t=1858298
Sent from my SCH-I535 using xda premium
badge 214 said:
That is great..now to my last question..(a few more like this and I can post directly to the guys thread)
When doing this step I am using TWRP.
Step 4 - Rooting Your Device and Unlocking Your Bootloader
Quote:
Using your custom recovery flash the download you chose above from Step 1 (#3)
Upon exiting your custom recovery to reboot first time, you will be asked if you want to "Disable recovery flash", you MUST select Yes
After reboot, your ROM will now be fully rooted, have a custom recovery, and/or your bootloader unlocked as well
after flashing SuperSU + Unlocked Bootloader I go to reboot but it does not ask about the Disabling of the recovery flash. Should I be worried or should I maybe flash back the Factory bootloader with ODEN after I am rooted??
Click to expand...
Click to collapse
I'm not sure if twp had that option. If you can reboot into recovery after booting up your phone you're good
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
I'm not sure if twp had that option. If you can reboot into recovery after booting up your phone you're good
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I guess if I root again I will try clockworkmod......
Hello Friends, This is BRICKBEATS and I have just COOKED my first custom rom for the Verizon Samsung Galaxy S III 4.3 from the recently released update. This is stock WITH KNOX APPS REMOVED AND SOME VZW BLOAT REMOVED, and was supposed to have root but it doesn't seem to work at this time. THIS IS A CWM FLASHABLE ZIP AND DOES NOT FLASH THE SECURED BOOTLOADERS, MODEM, OR RPM FILES!!!! I just flashed it to my phone less than an hour ago so any bugs are unknown as of yet. I figured we could all test it out and any input is appreciated. I will get screen shots soon!!! Enjoy
edit: wifi is broken
edit 2: give a decent amount of time for that first boot, it may take a battery pull and hard reset..
https://www.dropbox.com/s/c3vpr7udj39t1bm/d2vzw_signed_123013_203243.zip
YAY FIRST!
I think I know the answer to this but I just want to make sure. If we flash this are we still able to revert back to 4.1.2?
Sent from my SCH-I535 using xda app-developers app
Downloading now....will flash in the morning. Thanks for doing this!
Sent from my SCH-I535 using Tapatalk
Dropbox is so going to block this by the morning.
Sent from my SCH-I535 using xda app-developers app
Aside from OTA, this is the first released ML1 ROM no? :good::victory:
caveritt said:
I think I know the answer to this but I just want to make sure. If we flash this are we still able to revert back to 4.1.2?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
i would think so, since its only flashing the system, cache, and kernel files in CWM
caveritt said:
I think I know the answer to this but I just want to make sure. If we flash this are we still able to revert back to 4.1.2?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes if you do flash this rom you can in fact revert to 4.1.2 or any version of android built for this phone for that matter. All this is doing is just installing a rom that has the 4.3 base. If you do decide to go back, just flash a rom thats built on any other version of android for this phone.
this is actually a better rom option with more functionality...
http://forum.xda-developers.com/showthread.php?t=2591895
^this right here shows maturity. I love whenever I see a dev telling people about other ROMs in a good light. I tip my hat to you, sir.
Sent from my HTC6500LVWBLU using Tapatalk 4
If I've helped, please hit the thanks button
I bought a galaxy s 3 and wanna root it preferably with cyanogenmod because of being a fan of vanilla android. Im new to rooting but trying to learn as much as I can about it. I figured if it works I'll switch to it from my note 2 and show it off a bit...thanks for anu assistance and btw...im new to this site
Sent from my SCH-I605 using xda app-developers app
If ur fone has the 4.3OTA then u won't be able to flash that rom or custom roms aosp aokp Cyanmode
twistedillutions said:
If ur fone has the 4.3OTA then u won't be able to flash that rom or custom roms aosp aokp Cyanmode
Click to expand...
Click to collapse
Just to be clear, if your gs3 has the official 4.3 on it, you CANNOT unlock the bootloader. You WILL brick your phone if you try.
Safer not to mess with it at this point imho
Sent from my SCH-I535 using XDA Premium 4 mobile app
Well that sucks...is there anything I can do with my s3?? Thanks for the answers bte
Sent from my SCH-I605 using xda app-developers app
xopterdoc415 said:
Well that sucks...is there anything I can do with my s3?? Thanks for the answers bte
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Everything is here:
http://forum.xda-developers.com/showthread.php?t=2575661
Lots you can do, xposed, safestrap, custom 4.3 touchwiz roms. Unfortunately no aosp.
Sent from my SCH-I535 using Tapatalk 2
I definitely appreciate but cyanogrnmod is why I bought the phone. .. I'd there a way to possibly uninstall the update in that case or would I pay much have to wait till cyanogenmod comes or with something to get around Knox? Truthfully a good reputable stock android feel Rom installer would be nice but I'm super noob status when it comes to this and would appreciate any assistance
Sent from my SCH-I535 using xda app-developers app
xopterdoc415 said:
I definitely appreciate but cyanogrnmod is why I bought the phone. .. I'd there a way to possibly uninstall the update in that case or would I pay much have to wait till cyanogenmod comes or with something to get around Knox? Truthfully a good reputable stock android feel Rom installer would be nice but I'm super noob status when it comes to this and would appreciate any assistance
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
So far no one has been able to unlock the bootloader. Not even downgrade ur fone also results in hard brick
Well definitely appreciated...what would be a good rom that y'all would suggest for me in that case...can I still root this phone or its that screwed due to the 4.3 update??
Sent from my SCH-I605 using xda app-developers app
xopterdoc415 said:
Well definitely appreciated...what would be a good rom that y'all would suggest for me in that case...can I still root this phone or its that screwed due to the 4.3 update??
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I literally linked the thread for you where to look. Read the discussion op, yes you can root. Everything you need is in that thread.
Sent from my SCH-I535 using Tapatalk 2
So did the fone did take the 4.3 OTA
Yes it did take the new update didnt.think anything about it till now
Sent from my SCH-I605 using xda app-developers app
xopterdoc415 said:
Yes it did take the new update didnt.think anything about it till now
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Nothing you can do right now as far as custom rom. Currently a few folks are working on a patch for safestrap in order to flash custom rom (currently only able to flash custom TW rom). You can follow this http://forum.xda-developers.com/showthread.php?t=2618887 to see the status.
Much appreciated...lije I saud im new to this so I'm a lil hard headed...ty everyone that has helped the info was helpful
Sent from my SCH-I605 using xda app-developers app
Now final question...can I root this phone just root it even though I cannot flash the cyanogenmod??
Sent from my SCH-I605 using xda app-developers app
xopterdoc415 said:
Now final question...can I root this phone just root it even though I cannot flash the cyanogenmod??
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
yes you can root the 4.3 http://forum.xda-developers.com/showthread.php?t=2565758 pretty simple.
Thank yall kindly if I cannot do cyanogenmod I can at least root...good sh...stuff..ty
Sent from my SCH-I605 using xda app-developers app
I have just received a replacement phone. I have gone about the ways I rooted previously and none of them are working. This did NOT come with 4.3 from the factory, and the 4.3 update is not installed. I reverted back to stock from android recovery, so 4.0.4 is on there right now. But no matter what I do, whether it's the one click method, the GS3 toolkit format, or manually trying to gain root through recovery, nothing works. On the "downloading" screen that you need during use of ODIN, it says "SECURE CHECK FAIL", and it'll either have "boot" after it, or "kernel". Anyone have any ideas? As of this moment I have no working phone. Looking for some help asap. Thank you guys.
xgerryx said:
I have just received a replacement phone. I have gone about the ways I rooted previously and none of them are working. This did NOT come with 4.3 from the factory, and the 4.3 update is not installed. I reverted back to stock from android recovery, so 4.0.4 is on there right now. But no matter what I do, whether it's the one click method, the GS3 toolkit format, or manually trying to gain root through recovery, nothing works. On the "downloading" screen that you need during use of ODIN, it says "SECURE CHECK FAIL", and it'll either have "boot" after it, or "kernel". Anyone have any ideas? As of this moment I have no working phone. Looking for some help asap. Thank you guys.
Click to expand...
Click to collapse
Try to Odin flash factory 4.1.2 and see if the secure check turn to "enabled". If it's then try to root again.
I just Odin flashed a stock 4.1.2 ROM actually. It's booting up normally now. It honestly seems like they added a layer of protection on the newly distributed handsets. I will try to go through the normal 1 click method again and see if that works. How would I check if the secure check is still enabled?
Actually, no, it's still 4.0.4 but I'm going to try the same thing just with a different 1 click method.
Looks like the really old way worked. With the ez-unlock and ez-recovery. I had to completely demolish what was there when it was sent to me, though. So anyone who gets a replacement, the best bet is to flash a fresh 4.1.2 ROM or 4.0.4 ROM immediately, boot back up and go from there.
xgerryx said:
I just Odin flashed a stock 4.1.2 ROM actually. It's booting up normally now. It honestly seems like they added a layer of protection on the newly distributed handsets. I will try to go through the normal 1 click method again and see if that works. How would I check if the secure check is still enabled?
Actually, no, it's still 4.0.4 but I'm going to try the same thing just with a different 1 click method.
Looks like the really old way worked. With the ez-unlock and ez-recovery. I had to completely demolish what was there when it was sent to me, though. So anyone who gets a replacement, the best bet is to flash a fresh 4.1.2 ROM or 4.0.4 ROM immediately, boot back up and go from there.
Click to expand...
Click to collapse
Nice! just ignore the security check enable statement, I misread your post..
Can I install Clockworkmod Recovery and a custom ROM if I root with saferoot on my 4.3 TouchWiz VZW GS3?
TheUNCONN3CT3D said:
Can I install Clockworkmod Recovery and a custom ROM if I root with saferoot on my 4.3 TouchWiz VZW GS3?
Click to expand...
Click to collapse
No. Installing CWM will hardbrick your phone but it will be recoverable.
What you can do though, after Saferoot, is use Safestrap then you will be able to flash only other VRUCML1 TW 4.3 roms. You will need to flash the VRUCML1 kernel modules in that thread as well, after any and every rom flash in order to have working wifi.
What if I flash a de-KNOXED TW ROM?
What if I flash a de-KNOXED TouchWiz ROM then flash a different ROM like CyanogenMod or Carbon ROM?
TheUNCONN3CT3D said:
What if I flash a de-KNOXED TouchWiz ROM then flash a different ROM like CyanogenMod or Carbon ROM?
Click to expand...
Click to collapse
You can't do that, it uses a different kernel, you're limited to TouchWiz kernels only. Without it your phone will brick.
Sent from my SCH-I535 using Tapatalk 2
Oh :/ Thanks anyways.
That sucks. Hopefully someone from the community could figure this out. What if you rooted with Saferoot and froze KNOX? And installed a new ROM?
TheUNCONN3CT3D said:
That sucks. Hopefully someone from the community could figure this out. What if you rooted with Saferoot and froze KNOX? And installed a new ROM?
Click to expand...
Click to collapse
Knox isn't the problem, Verizon implemented the locked bootloader. Doing this only keeps your system from Detecting root access, but it really doesn't matter unless you're planning to return your phone to Verizon for warranty service.
Sent from my SCH-I535 using Tapatalk 2
Oh well I could care less about the warranty service. I just care about getting rid of this evil ROM.
Sent from my SCH-I535 using xda app-developers app
TheUNCONN3CT3D said:
Oh well I could care less about the warranty service. I just care about getting rid of this evil ROM.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I know, the point is you can't disable the bootloader, so you're limited to 4.3 custom TouchWiz roms using safestrap for now.
Sent from my SCH-I535 using Tapatalk 2
Oh okay thanks.
Okay thanks for all the help!
Issues with safestrap and installing CleanROM 8 Core Edition
For some reason when i use Safestrap to install CleanROM 8 i can't get the wifi to work...this might not be the best place to post but I don't have enough privileges to post in dev forums.
Phrisko said:
For some reason when i use Safestrap to install CleanROM 8 i can't get the wifi to work...this might not be the best place to post but I don't have enough privileges to post in dev forums.
Click to expand...
Click to collapse
Have you flashed the VRUCML1 kernel modules zip like you are supposed to? They are in the first post of the Safestrap thread.
Sent from my SCH-I535 using Tapatalk 4
Phrisko said:
For some reason when i use Safestrap to install CleanROM 8 i can't get the wifi to work...this might not be the best place to post but I don't have enough privileges to post in dev forums.
Click to expand...
Click to collapse
You have to also flash the kernel module from the OP of the safestrap thread.
Sent from the Shark Tank using XDA Premium 4 mobile app
Intalling CleranRom 8 using Safestrap
landshark68 said:
You have to also flash the kernel module from the OP of the safestrap thread.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
SlimSnoopOS said:
Have you flashed the VRUCML1 kernel modules zip like you are supposed to? They are in the first post of the Safestrap thread.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
OK so when i installed the rom and ran it, i had 4g but i had no wifi. So i then flashed the kernal module and lost all 4g...should i flash it right after i flash the rom before boot?
Phrisko said:
OK so when i installed the rom and ran it, i had 4g but i had no wifi. So i then flashed the kernal module and lost all 4g...should i flash it right after i flash the rom before boot?
Click to expand...
Click to collapse
Yup! Wipe, flash the rom, kernel modules, then boot up. Do these exact steps each time that you flash a custom VRUCML1 4.3 touchwiz (TW) rom.
Edited.
SlimSnoopOS said:
Yup! Wipe, flash the rom, kernel modules, then boot up. Do these exact steps each time that you flash a custom VRUCML1 4.3 touchwiz (TW) rom.
Edited.
Click to expand...
Click to collapse
OK re-creating rom slot 1...........installing CleanRom 8...flashing Kernel Modules...rebooting......Success! Thanks so much! Worked like a charm!:victory::victory::victory:
Hope we can get root and unlock bootloader soon without Knox. Kinda missing kitkat due to my replacement from verzion
Sent from my Nexus 7 using Tapatalk
Me too... I feel like a prisoner lol
Sent from my SCH-I535 using Tapatalk
Phrisko said:
Me too... I feel like a prisoner lol
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
so i feel stupid...after i creat a rom slot (and does it matter what size i make it?)
i can't install CM?
JasonN3 said:
so i feel stupid...after i creat a rom slot (and does it matter what size i make it?)
i can't install CM?
Click to expand...
Click to collapse
It already comes with twrp preinstalled with safestrap. You can only flash TouchWiz 4.3 roms. You can change the rom slot size according to your preference but the more you use on one rom the less you'd have for any additional slots.
Sent from my SCH-I535 using Tapatalk
JasonN3 said:
so i feel stupid...after i creat a rom slot (and does it matter what size i make it?)
i can't install CM?
Click to expand...
Click to collapse
to clarify
a-does it matter what size i make the slot? pros/coons?
am i limited in roms, i don't understand what it means when you saya touchwiz rom?
can i instal any decent rom, like a cyagenmod as long as i do the kernel after?
So I'm locked and rooted with safestrap installed on 4.3. There's only a couple roms compatible with locked bootloaders so I decided to try them out. So I downloaded Alliance rom and it boots up just fine. But there's only one issue, the WiFi won't turn on. I tap the toggle, and it says on for a second, then it turns off. I have no idea why, but I've tried different kernels and roms and its the same thing. Any help or insight would be appreciated. Thanks.
Sent from my SCH-I535 using XDA Free mobile app
Go back into the Safestrap thread and download the VRUCML1 kernel modules. If you want working wifi whenever you flash a TouchWiz rom through Safestrap, you must flash these as well. These will only work if your baseband is VRUCML1 (Settings/About Phone/Baseband). If you are on VRUCNC1 then you need to Odin flash VRUCML1 tar then root and run Safestrap.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Go back into the Safestrap thread and download the VRUCML1 kernel modules. If you want working wifi whenever you flash a TouchWiz rom through Safestrap, you must flash these as well. These will only work if your baseband is VRUCML1 (Settings/About Phone/Baseband). If you are on VRUCNC1 then you need to Odin flash VRUCML1 tar then root and run Safestrap.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
I am almost certain I flashed that before the rom. I guess it may have been c1 instead. I will try again
Sent from my SCH-I535 using XDA Free mobile app
poppers162 said:
I am almost certain I flashed that before the rom. I guess it may have been c1 instead. I will try again
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Cool, let me know how it goes. Remember, once on VRUCML1 and Safestrap, flash the rom then kernel modules. If the rom has an option for Safestrap then choose that and see if wifi works BEFORE reflashing and flashing with VRUCML1 kernel modules.
SlimSnoopOS said:
Cool, let me know how it goes. Remember, once on VRUCML1 and Safestrap, flash the rom then kernel modules. If the rom has an option for Safestrap then choose that and see if wifi works BEFORE reflashing and flashing with VRUCML1 kernel modules.
Click to expand...
Click to collapse
The original one I had was only 2 megabytes compared to the 19 Megabyte one I just got. In the description of Alliance rom, it says to flash the module, then the rom. I did that, chose the safestrap kernel and it reboots after 30 seconds on the rom. It keeps doing that. So then I wiped it, and tried a different kernel, which is the stock Alliance one, and it boots up and works fine, but no WiFi. I'm completely lost here, as I just got this phone 3 days ago. And I took the 4.3 update with no knowledge of the locked bootloader If you have any more suggestions, please inform me. Thanks.
Sent from my SCH-I535 using XDA Free mobile app
poppers162 said:
The original one I had was only 2 megabytes compared to the 19 Megabyte one I just got. In the description of Alliance rom, it says to flash the module, then the rom. I did that, chose the safestrap kernel and it reboots after 30 seconds on the rom. It keeps doing that. So then I wiped it, and tried a different kernel, which is the stock Alliance one, and it boots up and works fine, but no WiFi. I'm completely lost here, as I just got this phone 3 days ago. And I took the 4.3 update with no knowledge of the locked bootloader If you have any more suggestions, please inform me. Thanks.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
No, flash the rom then the VRUCML1 kernel modules. OR flash the rom and choose Safestrap kernel.
What does your baseband say, btw? VRUCML1 or VRUCNC1?
SlimSnoopOS said:
No, flash the rom then the VRUCML1 kernel modules. OR flash the rom and choose Safestrap kernel.
What does your baseband say, btw? VRUCML1 or VRUCNC1?
Click to expand...
Click to collapse
Ml1
Sent from my SCH-I535 using XDA Free mobile app
SlimSnoopOS said:
No, flash the rom then the VRUCML1 kernel modules. OR flash the rom and choose Safestrap kernel.
What does your baseband say, btw? VRUCML1 or VRUCNC1?
Click to expand...
Click to collapse
Nothing is working, it either doesn't boot up, or no WiFi.
Sent from my SCH-I535 using XDA Free mobile app
poppers162 said:
Nothing is working, it either doesn't boot up, or no WiFi.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Out of curiosity which rom are you running?
@SlimSnoopOS not trying to step on any toes here
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
ShapesBlue said:
Out of curiosity which rom are you running?
@SlimSnoopOS not trying to step on any toes here
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Alliance rom, build 23.
Sent from my SCH-I535 using XDA Free mobile app
poppers162 said:
Alliance rom, build 23.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
That's one rom I've never tried out. I'll let snoop handle the rest.
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
poppers162 said:
Alliance rom, build 23.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm, have you tried another rom like CleanRom or Mostly Stock ML1 to see if wifi works? Cuz the only two methods I know to have working wifi on Safestrap is
1) Flash rom and if it has Aroma installer, choose SafeStrap kernel option
or
2) Flash rom then flash VRUCML1 kernel modules
SlimSnoopOS said:
Hmm, have you tried another rom like CleanRom or Mostly Stock ML1 to see if wifi works? Cuz the only two methods I know to have working wifi on Safestrap is
1) Flash rom and if it has Aroma installer, choose SafeStrap kernel option
or
2) Flash rom then flash VRUCML1 kernel modules
Click to expand...
Click to collapse
I've tried MOAR and I believe that's it
Sent from my SCH-I535 using XDA Free mobile app
poppers162 said:
I've tried MOAR and I believe that's it
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Aight, try another VRUCML1 based rom with your same VRUCML1 kernel modules and we'll see if its reproducible there. You may have to reboot one or two additional times after the rom boots up to check if wifi works.
SlimSnoopOS said:
Aight, try another VRUCML1 based rom with your same VRUCML1 kernel modules and we'll see if its reproducible there. You may have to reboot one or two additional times after the rom boots up to check if wifi works.
Click to expand...
Click to collapse
Will do, CleanRom is downloading right now. I'll let you know what's up when it's installed. Thanks
Sent from my SCH-I535 using XDA Free mobile app
SlimSnoopOS said:
Aight, try another VRUCML1 based rom with your same VRUCML1 kernel modules and we'll see if its reproducible there. You may have to reboot one or two additional times after the rom boots up to check if wifi works.
Click to expand...
Click to collapse
Same thing with CleanRom and a fresh download of the modules. I think I might just stay with stock TW. Hopefully some miracle will happen and the bootloader will be unlockable again. Guess we'll just wait and see
Sent from my SCH-I535 using XDA Free mobile app