Database Info

[Q] AP Fastboot Flash Mode (s) -version droid razr HD

I've rooted, and unbricked so many devices, but I'm having problems with this one. I successfully rooted the device, but when I tried to Flash 4.2.2, but it didn't work properly. Right now, I can get into the Android system recovery, but the screen the phone normally boots to says the below.
AP Fastboot Flash Mode (s)
10.9B(*) (sha-1e9f557, 2013-02-14 09:13:08)
eMMC Info: Size 16GB
Device is Locked. Status Code:0
Battary Ok
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
usb disconnected
isb connected
for the below steps, I used the apply updaye from external storage option on Android system recovery.
When I try to flash Blur_Version.6.16.211.XT912.Verizon.en.US.zip, it Says Installation aborted after verifying update package. The same thing happens when I try to flash Slim-xt926-4.2.2.build.5.6-UNOFFICIAL-20130521-0436.zip
when I try flashing Blur_Version.6.16.211.XT912.Verizon.en.US.zip, it says assert failed: file_getprop("/system/build.prop". "ro.build.fingerprint") == "motorola/XT926_verizon/vanquish:4.1.1/9.8.1Q_39/41:user/release-keys" || file_getprop("/system/build.prop". "ro.build.fingerprint") == "motorola/XT926_verizon/vanquish:4.1.1/9.8.1Q-62_VQW_MR-2/6:user/release-keys"
So I can boot into the Android system rocovery, and boot mode selection menu(10.98)
on the boot mode selection menu, the only option that doesnt make my phone go into AP Fastboot Flash Mode, is the recovery option, and when I go into the recovery option, I get the android with the Exclamation mark, from there is how I get to the android system recovery.
Any ideas on how to fix this? I am assuming it will involve ADB, but I cannot do any ADB commands, because my device is not found when I do ADB remount, or ADB devices

You have to unlock your bootloader and install clockwork mod to install custom roms.
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
You have to unlock your bootloader and install clockwork mod to install custom roms.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Tried to install clockwork mod via Rom Manager, but it was it wasn't available for the droid hd. I had the phone rooted, and had safestrap installed. and I can't unlock the device on the motorola site anymore, because I can't get my phone to boot properly.

Well that's not how to do any of that. Definitely not safestrap. Pretty sure there's a utility in the development section that will do it all for you. I'd tell you the fastboot ways but it's probably over your head.
http://forum.xda-developers.com/showthread.php?t=2154995
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
Well that's not how to do any of that. Definitely not safestrap. Pretty sure there's a utility in the development section that will do it all for you. I'd tell you the fastboot ways but it's probably over your head.
http://forum.xda-developers.com/showthread.php?t=2154995
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I've tried the droid razr utility, and that didn't work for me either. Kept getting errors. I'll see what I can do with this toolkit, and let you know how it goes.

harshb98 said:
I've tried the droid razr utility, and that didn't work for me either. Kept getting errors. I'll see what I can do with this toolkit, and let you know how it goes.
Click to expand...
Click to collapse
I cannot install CWM it says invalid image size for partition recovery. and it still says the device is locked, after I unlocked it.

Are you sure it says status code unlocked? Are you rooted?
Sent from my PACMAN MATRIX HD MAXX

it says fastboot oem unlock punlock code]
OKAY [.023s]
finished. total time : .026s
*BOOTLOADER UNLOCK*
press any key to continue.
That's what it says after I enter in the unlock code I got from Generating unlock code OEM. I got a really long string of characters for the unlock code, and there are 4 parts seperated by '#' so I tried each part as the code, because I have never done this before, and when I did the whole string, it was a max of 64 characters, so that's why I started trying it by parts seperated by the '#'. and Yes it is rooted, because when I tried to do the root option, it said it was already rooted.

Unlocking your bootloader has nothing to do with entering numbers on your phone. And to check if your unlocked just go to the fastboot screen and see what status code it gives you.
Sent from my PACMAN MATRIX HD MAXX

the status code is 0. What option am I supposed to be using? the drivers are up to date, Still can't install recovery, I have root access, didn't touch the install modem (radio).

Does it say device unlocked? Status code 0 is usually locked. 3 Is unlocked.
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
Does it say device unlocked? Status code 0 is usually locked. 3 Is unlocked.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
No, it's still locked, and I don't know how to unlock it from this screen.

You just run the unlock bootloader procedure.
Sent from my PACMAN MATRIX HD MAXX

That's what I did. I did option 2, for unlock bootloader, than I get 1. reboot fastboot 2. Generate unlock code OEM 3. login to website to continue with unlocking 4. Unlock using unlock code I did option 2, and got the unlock code, than did option 4, and used the unlock code it generated.

harshb98 said:
That's what I did. I did option 2, for unlock bootloader, than I get 1. reboot fastboot 2. Generate unlock code OEM 3. login to website to continue with unlocking 4. Unlock using unlock code I did option 2, and got the unlock code, than did option 4, and used the unlock code it generated.
Click to expand...
Click to collapse
http://www.andromods.com/basic-how-...ootloader-motorola-unlocking-tool-online.html
followed the instructions on that site, and it said "your device does not qualify for bootloader unlocking."

You can't do it online. You have to do it with the 3rd party tool.
http://forum.xda-developers.com/showthread.php?t=2226504
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
You can't do it online. You have to do it with the 3rd party tool.
http://forum.xda-developers.com/showthread.php?t=2226504
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
SO What did I do wrong? I generated the unlock OEM code, than I selected the Option to Unlock using unlock code. when I did the generate unlock OEM code, it gave me a long numer like the one on that site, but when I use that number as the unlock code, it says it's to long, and it can be at max 64 characters.

Once again there's no numbers involved man. Your trying to do the official unlock. Use the link I just posted.
Sent from my PACMAN MATRIX HD MAXX

deeje00 said:
Once again there's no numbers involved man. Your trying to do the official unlock. Use the link I just posted.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I have no way of doing this 'Ensure USB Debugging mode is enabled on your device.' when I ran the .bat file, it said "waiting for device
daemon not running. Starting it now on port 5037
daemon started succesfully

You can't enable usb debugging?
Sent from my PACMAN MATRIX HD MAXX

Forgotten lock pattern

Hi,
My daughter has changed the lock pattern on her Z5 and then subsequently forgotten the lock pattern. She now cannot get into her phone.
The phone also doesn't give an option to enter a google account to unlock it.
I'm used to my nexus, so as a last resort, wiping the phone is pretty easy.
I've learned that Sony does not provide an installed recovery partition so wiping the phone is not easy.
I've tried booting a recovery via fastboot to wipe the phone which did not work.
I've tried unlocking the bootloader to then boot a recovery by:
- getting unlock code from sony
- putting phone into fastboot
- installing drivers and minimal adb fastboot
- running the following command: fastboot -i 0x0fce oem unlock 0xUNLOCKCODEHERE
I get this error: FAILED (remote: Command not allowed)
I've tried using flashtool (both official and unofficial). The official tool from sony says your phone is locked. The other flashtool gives me the same error as fastboot does (I assume it is running the same command).
What options do i have to either unlock the phone or wipe it?
Thanks
James

If I read the user manual correctly you can remove the lock pattern by repairing the phone with Xperia Companion.
If you forget your screen unlock password, PIN or pattern, you can use the device repair feature in Xperia™ Companion to erase the security layer. You need to provide your Google account login details to perform this operation. By running the repair feature, you reinstall software for your device and you may lose some personal data in the process.
Click to expand...
Click to collapse
source: http://support.sonymobile.com/gb/xperiaz5/userguide/Restarting-and-resetting-your-device/

As last resort you could reflash the ftf (firmware) u are using. Or just wipe data.
But dont forget to back up ! ?
Gesendet von meinem E6653 mit Tapatalk

you find the way?
hello..i got the same problem,,but I sent it to repair the glass and until it came back I forgot the pattern.(I got another phone).can you help me?please advice.,i realy want my sony
thank you.
[email protected]

suzana.ask said:
hello..i got the same problem,,but I sent it to repair the glass and until it came back I forgot the pattern.(I got another phone).can you help me?please advice.,i realy want my sony
thank you.
[email protected]
Click to expand...
Click to collapse
Flash new ftf and in flashtool select to wipe userdata.
---------- Post added at 02:11 PM ---------- Previous post was at 02:11 PM ----------
mrjack711 said:
Hi,
My daughter has changed the lock pattern on her Z5 and then subsequently forgotten the lock pattern. She now cannot get into her phone.
The phone also doesn't give an option to enter a google account to unlock it.
I'm used to my nexus, so as a last resort, wiping the phone is pretty easy.
I've learned that Sony does not provide an installed recovery partition so wiping the phone is not easy.
I've tried booting a recovery via fastboot to wipe the phone which did not work.
I've tried unlocking the bootloader to then boot a recovery by:
- getting unlock code from sony
- putting phone into fastboot
- installing drivers and minimal adb fastboot
- running the following command: fastboot -i 0x0fce oem unlock 0xUNLOCKCODEHERE
I get this error: FAILED (remote: Command not allowed)
I've tried using flashtool (both official and unofficial). The official tool from sony says your phone is locked. The other flashtool gives me the same error as fastboot does (I assume it is running the same command).
What options do i have to either unlock the phone or wipe it?
Thanks
James
Click to expand...
Click to collapse
Just use flashtool to flash new ftf and select to wipe userdata, pictures and that won't be wiped you don't select to wipe ssd.

My phone keeps on booting to fastboot

Hi all. Need urgent help here. I tried flashing my phone following everything on one post i found for flashing(androidbiits[dot]com/root-oppo-realme-5-rmx1911-easily/). But something went wrong(I don't know what went wrong, I just followed everything step by step). My phone suddenly keeps on booting to fastboot mode. I tried entering recovery mode but it boots to fastboot mode instead. Need help
PS. I tried to reflash my phone with rmx1911 stock rom. But I noticed my device state is locked. I can't somehow unlock it with fastboot(fastboot flashing unlock). A bootloader unlock prompt appears on my phone and when I choose to unlock the bootloader, my phone just reboots back to fastboot mode with the device state still locked

Use msm tool and ofp file for realme 5 ..you have to flash whole rom again..and it can be flashed in phone state locked too

Give the following commands :
$ fastboot flashing unlock
Then flash TWRP
Then flash stock ROM by renaming .ozip to .zip via TWRP.

mine too ... is there anything I can fix
mine too ... is there anything I can fix

joniyesnoppa said:
mine too ... is there anything I can fix
Click to expand...
Click to collapse
Flash this file use command-
fastboot flash vbmeta vbmeta.img
---------- Post added at 08:24 PM ---------- Previous post was at 08:20 PM ----------
sumeetsk2 said:
Flash this file use command-
fastboot flash vbmeta vbmeta.img
Click to expand...
Click to collapse
bit.ly/383BPIp
Download and Flash this files

how do I enable fast charging 3.0 because charging defaults only to 1.4a even though redmi 3s can only 1.9ampere

Cant flash vbmeta.img ... Anyone? Help

limilnate1 said:
Hi all. Need urgent help here. I tried flashing my phone following everything on one post i found for flashing(androidbiits[dot]com/root-oppo-realme-5-rmx1911-easily/). But something went wrong(I don't know what went wrong, I just followed everything step by step). My phone suddenly keeps on booting to fastboot mode. I tried entering recovery mode but it boots to fastboot mode instead. Need help
PS. I tried to reflash my phone with rmx1911 stock rom. But I noticed my device state is locked. I can't somehow unlock it with fastboot(fastboot flashing unlock). A bootloader unlock prompt appears on my phone and when I choose to unlock the bootloader, my phone just reboots back to fastboot mode with the device state still locked
Click to expand...
Click to collapse
Mine to have the same issue....i think you should visit nearest realme service center for flashing stock rom
The Phone is unable to flash vbmeta beacuse the phone is in locked condition
There only one way "FLASH STOCK ROM"

Contact me +923358048675 whatsapp 100% remote service
limilnate1 said:
Hi all. Need urgent help here. I tried flashing my phone following everything on one post i found for flashing(androidbiits[dot]com/root-oppo-realme-5-rmx1911-easily/). But something went wrong(I don't know what went wrong, I just followed everything step by step). My phone suddenly keeps on booting to fastboot mode. I tried entering recovery mode but it boots to fastboot mode instead. Need help
PS. I tried to reflash my phone with rmx1911 stock rom. But I noticed my device state is locked. I can't somehow unlock it with fastboot(fastboot flashing unlock). A bootloader unlock prompt appears on my phone and when I choose to unlock the bootloader, my phone just reboots back to fastboot mode with the device state still locked
Click to expand...
Click to collapse
..

Realme has just release its flashtool to flash there ofp firmware through fastboot. Just try it. and post result.
Note: This require bootloader to unlock
Flashtool Link:
https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool.zip
Firmware Link:
https://combinefile.com/index.php?a=downloads&b=file&c=download&id=42977

not flashing
my realme 5 stuck in fastboot mode and bootloader is lock and vbmeta image want bootloader unlock
plz plz help me
stay home and staysafe friends

How to Remove Warning Bootloader Unlocked Message

Recently rooted my new Zenfone 7. Is it possible to remove Bootloader unlocked Warning message at the start up of the system? Thanks for an answer.

re-lock the bootloader
Boot into fastboot, then send this command from your pc.
fastboot oem asus-lock
how did you get root to work? I followed the instructions listed and it would not work for me.

I followed the instructions there: https://forum.xda-developers.com/t/recovery-official-twrp-for-asus-zenfone-7-series.4161719/ in fastboot mode you should update android drivers manually through device manager to get it work otherwise you'll get " waiting on device " error and it won't flash TWRP.

Is it possible to remove Bootloader unlocked warning without re-locking device though?

Jkm15 said:
I followed the instructions there: https://forum.xda-developers.com/t/recovery-official-twrp-for-asus-zenfone-7-series.4161719/ in fastboot mode you should update android drivers manually through device manager to get it work otherwise you'll get " waiting on device " error and it won't flash TWRP.
Click to expand...
Click to collapse
Getting TWRP on and working was fine. It was when I went and tried to flash Magisk that it kept causing a bootloop.
Jkm15 said:
Is it possible to remove Bootloader unlocked warning without re-locking device though?
Click to expand...
Click to collapse
Why? Unless you plan on overwriting TWRP, there is no benefit to having it unlocked all the time. TWRP will still work after it is re-locked. and you can unlock it again via the app anytime you need to update.

Joeb2000 said:
Getting TWRP on and working was fine. It was when I went and tried to flash Magisk that it kept causing a bootloop.
Why? Unless you plan on overwriting TWRP, there is no benefit to having it unlocked all the time. TWRP will still work after it is re-locked. and you can unlock it again via the app anytime you need to update.
Click to expand...
Click to collapse
Had locked bootloader on device with magisk. Result is fastboot loop =|

Same wish here. that warning screen is ugly....

Unable to unlock the bootloader

I've recently bricked my device trying to install LineageOS, long story short I had to use MSM Tool in order to flash a new, stock ROM. Since I did that I am unable to unlock the bootloader: everytime I do the phone bricks with this following Yellow message on the screen: "upgrade download failed please check your download flow is right". After that I have to use the MSM Tool again to unbrick the Yellow text.
Any ideata how I might unlock the bootloader? Aside from that, the phone works fine.
EDIT: I managed to fix this by OEM updating my device to Android 11 and *then* unlocking the bootloader. Another issue has arisen now, though: whenever I try to boot TWRP from fastboot, the phone reboots and gets stuck in the "Fastboot Mode" OnePlus logo screen. Would anyone know how to fix this, or maybe is there a way to root your phone without using a custom recovery?

Karellen11 said:
I've recently bricked my device trying to install LineageOS, long story short I had to use MSM Tool in order to flash a new, stock ROM. Since I did that I am unable to unlock the bootloader: everytime I do the phone bricks with this following Yellow message on the screen: "upgrade download failed please check your download flow is right". After that I have to use the MSM Tool again to unbrick the Yellow text.
Any ideata how I might unlock the bootloader? Aside from that, the phone works fine.
EDIT: I managed to fix this by OEM updating my device to Android 11 and *then* unlocking the bootloader. Another issue has arisen now, though: whenever I try to boot TWRP from fastboot, the phone reboots and gets stuck in the "Fastboot Mode" OnePlus logo screen. Would anyone know how to fix this, or maybe is there a way to root your phone without using a custom recovery?
Click to expand...
Click to collapse
Yes you can ,,install thru boot loader with ADB and fastboot CMD. First you need to extract the boot.img from your oos rom, patch it in magisk app, then put it in your adb folder and run the cmd " fastboot flash boot boot.img .