[Q] HELP! - Verizon HTC One (M8)

I had installed the newest version of twrp. AFter hearing that the older version was better i used the terminal emulator to flash 2.7.0.2 I rebooted the phone and now it will will only boot into recovery! Any ideas?! And since i was installing TWRP again i hadnt made a backup yet. Am i screwed?

DucatiMon said:
I had installed the newest version of twrp. AFter hearing that the older version was better i used the terminal emulator to flash 2.7.0.2 I rebooted the phone and now it will will only boot into recovery! Any ideas?! And since i was installing TWRP again i hadnt made a backup yet. Am i screwed?
Click to expand...
Click to collapse
Do you know how to use fast boot from your PC if so follow this Verizon RUU puts everything back to stock for you to start fresh
If you do not have fast boot download this HTC ONE ToolKit and use it to fast boot flash the Verizon RUU file

hipsh0t said:
Do you know how to use fast boot from your PC if so follow this Verizon RUU puts everything back to stock for you to start fresh
If you do not have fast boot download this HTC ONE ToolKit and use it to fast boot flash the Verizon RUU file
Click to expand...
Click to collapse
i know how to use it. I am about to do that method now. After frantically searching the forums i finally found some info on it. Will be back shortly.....
And its still downloading........

still no luck.........

FINALLY
DucatiMon said:
still no luck.........
Click to expand...
Click to collapse
All is good

Related

[Q] boot loop

Hey I hate having to post this but im stumped. i was running cm7 nightly build 21 and wanted to flash back to stock pd15img. i followed the steps but when i went to update all it did was turn s on. now my mytouch gets to the animated MY logo and loops. i can still get to recovery and i have tried restore my backup but i still get the MY animated boot logo. any help or suggestions? thanks.
Did you revert your recovery back to stock or Clockwork 2.x instead of Clockwork 3.x that CM7 requires?
Genocaust said:
Did you revert your recovery back to stock or Clockwork 2.x instead of Clockwork 3.x that CM7 requires?
Click to expand...
Click to collapse
Yep. 2.5.1.2.. I even tried just flashing icedglacier but i still get the animated MYlogo wich continues to loop.
does the phone have to be rooted to fix this? It was prior to flashing the PD15IMG, but like i said when it was done loading the image i clicked update and it just turned s on....
okay so i just made some progress i think. i just flashed icedglacier again and this time it changed the boot logo to the icedglacier boot logo but it still loops.
on the bright side of things i was really tire of seeing the mytouch logo.
theycallmechase said:
Yep. 2.5.1.2.. I even tried just flashing icedglacier but i still get the animated MYlogo wich continues to loop.
does the phone have to be rooted to fix this? It was prior to flashing the PD15IMG, but like i said when it was done loading the image i clicked update and it just turned s on....
Click to expand...
Click to collapse
the PD15IMG is a HBoot flashed image. not via Clockwork's Recovery Manager.
What method did you follow to try and unroot your phone.
We kinda need to know what you did in order to fix it.
If you store the PD15IMG onto the root of the SD card and boot into bootloader it should automatically restore everything to a factory spec.
I unrooted my device by downloading the unroot folder and using visionary and the terminl emulator.
I didnt try to flash pd15img through clockworkmod i just put it on the root of my sd card and let the hboot do the rest once it loaded the image it gave me he update option i chose to update and when my phone came back on in hboot i saw s off and now im stuck in boot loop.
I have to get to work but if you think of anything that could help me out trhat would be awesome thanks guys for reading this in the first place
ps now if i try to load the pd15img it will load the image but there is no update opyion
theycallmechase said:
I unrooted my device by downloading the unroot folder and using visionary and the terminl emulator.
I didnt try to flash pd15img through clockworkmod i just put it on the root of my sd card and let the hboot do the rest once it loaded the image it gave me he update option i chose to update and when my phone came back on in hboot i saw s off and now im stuck in boot loop.
Click to expand...
Click to collapse
Try doing this. Esp. if you did the ./gfree deal.
http://forum.xda-developers.com/showthread.php?t=863899
I also made this mistake, I had to reflash a cm7 rom or miui, downgrade the recovery to 2.5.x (could also adb push) and from there went back to stock and rerooted and flashed ice glacier.
well im downloading sdk now. my internet is super slow.
theycallmechase said:
well im downloading sdk now. my internet is super slow.
Click to expand...
Click to collapse
you are just wanting the ADB you can download and install the drivers for just that. Takes like 5 mins to get up and running.
neidlinger said:
you are just wanting the ADB you can download and install the drivers for just that. Takes like 5 mins to get up and running.
Click to expand...
Click to collapse
cool drivers are installed. so do i just need to be hboot to use the drivers? or is there some sort a software i need?
theycallmechase said:
cool drivers are installed. so do i just need to be hboot to use the drivers? or is there some sort a software i need?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=928370&page=2
neidlinger said:
http://forum.xda-developers.com/showthread.php?t=928370&page=2
Click to expand...
Click to collapse
hahaha thanks bro, love the "(great for noobs)" in the title of the thread. will try as soon as possible.
after reading the guide i have one problem.
5. On your phone go to Settings/Applications/Development and make sure USB debugging is ON and plug it in via the usb..
any suggestions??
theycallmechase said:
hahaha thanks bro, love the "(great for noobs)" in the title of the thread. will try as soon as possible.
after reading the guide i have one problem.
5. On your phone go to Settings/Applications/Development and make sure USB debugging is ON and plug it in via the usb..
any suggestions??
Click to expand...
Click to collapse
Being that you have s=on it's going to be fairly difficult. [sidenote] i still cannot believe the PD15IMG didn't work for you [/sidenote]. but you can try and use the fastboot commands.If s=off you could load a separate recovery image and flash a ROM to get you up and running.
yeah, i knew this would happen to me. when i try to adb in it dosent show my device. i have a thing with best buy where they will mail it in to htc to have it fixed but im not sure since i modded the phone.
theycallmechase said:
yeah, i knew this would happen to me. when i try to adb in it dosent show my device. i have a thing with best buy where they will mail it in to htc to have it fixed but im not sure since i modded the phone.
Click to expand...
Click to collapse
since you are in fastboot you cannot use
adb devices
Click to expand...
Click to collapse
you have to use
.
fastboot devices
Click to expand...
Click to collapse
ok so adb devices gave me a list of devices wich was none.
fastboot devices did not do anything for me.
wait a minute.... it did show something a second time it says sh0bt602653 fastboot....
Ok, that means fastboot has detected your phone. You can flash individual system.img, recovery.img, etc directly from fastboot.
so what do i flash? what commands do i need to use.
C:\adb>fastboot -p sh0b7t602653 update update.zip
Whoops: didn't find expected signature
read_central_directory_entry failed
πmªeΩ▲K¡8|x¥►╬←ì☻²╣⌂ì╒▄╞)ⁿ‼♀÷ta in 'h↑τ‼
íTQ▬á╠4δ/l≤huä╘:ì{îC`╢r◄+m§┌╪é^EÇkm☺ªfR
⌠èc┘↕á(╚αñ-0←♫┌╗ê-UY#è°┌o◄■k┤▐╩_``╠FA∞9 ÄM°c↑Sl░LΩ¥♣⌠q╦è╬5è╖P»ìì_j↑û♦ß‼[Γ╞ö¶¡l∙K
╬@↓%$»}ÅKù⌡ΘP9♂₧▒≤☺■Wm3┴pß|*╩°φ`Dú╞▒m└√±←╓6↓A¬]W,ùa½↓εWX╗ôâ\?o\ö~y╚` ╨%█εç←╚q
¶╩♥&ò⌂M─)_5m8ù╢+'⌠y<BWδ¼
!╩X┘♫■s▐k╗wS";öPôBÇ1Yé↔è_ÿ∟╧♫â`↕á┘h▐]∟-╟;»5
▼Ç↨♥H·ò⌠ƒQ²'►╟Oç∙╗Y∟ì▲67╘%)▐∩╘kO¥▬Θî☼R∟┴¼'

i cant do Recovery

hello, im trying to install a custom rom, and now im in recovery step. i installed like 3 different recoverys.
all of them stuck in the red text step(when i get in to recovery mode from bootloader), and even after 20-30 mins still in the same position.
can someone say me when i need to do? i really need to fix it.
Snow201 said:
hello, im trying to install a custom rom, and now im in recovery step. i installed like 3 different recoverys.
all of them stuck in the red text step(when i get in to recovery mode from bootloader), and even after 20-30 mins still in the same position.
can someone say me when i need to do? i really need to fix it.
Click to expand...
Click to collapse
Make sure you are not plugged into your pc when you boot to recovery! - if that doesn't solve it ..
Does the phone boot to the existing Rom, do you have Rom manager installed? - if so update the recovery from Rom Manager. I found that after rooting the One S using the toolkit I could not get in to recovery, the update from Rom Manager sorted it!
All the best :good:
FatherD said:
Make sure you are not plugged into your pc when you boot to recovery! - if that doesn't solve it ..
Does the phone boot to the existing Rom, do you have Rom manager installed? - if so update the recovery from Rom Manager. I found that after rooting the One S using the toolkit I could not get in to recovery, the update from Rom Manager sorted it!
All the best :good:
Click to expand...
Click to collapse
i tried before to get in to recovery mode without USB(plugged to my computer or to charger) and still same problem.
and i dont have any rom manager.
i got HTC one S only with Unlocked phone and recovery(that doesnt work), so i think i need root for rom manager.
got something else?
Snow201 said:
i tried before to get in to recovery mode without USB(plugged to my computer or to charger) and still same problem.
and i dont have any rom manager.
i got HTC one S only with Unlocked phone and recovery(that doesnt work), so i think i need root for rom manager.
got something else?
Click to expand...
Click to collapse
Had same issue with the tool kit, the cwm didnt stick. The Touch work one did stick and I was able to get into recovery. However I downloaded the app ROM MANAGER and flashed the recovery from there. Since then I've had no issues booting into reocvery or bootloader. Just download rom manager and go about it that way!
osugsxr said:
Had same issue with the tool kit, the cwm didnt stick. The Touch work one did stick and I was able to get into recovery. However I downloaded the app ROM MANAGER and flashed the recovery from there. Since then I've had no issues booting into reocvery or bootloader. Just download rom manager and go about it that way!
Click to expand...
Click to collapse
NVM, there is no recovery for HTC at all, only Galaxy and some more. what i need to do?
I had this problem when I first rooted its weird just download the recovery again but save straight to fastboot folder wherever u have the folder and don't rename then flash the recovery that's how mine worked
Sent from my HTC One S using xda premium
k1llacanon said:
I had this problem when I first rooted its weird just download the recovery again but save straight to fastboot folder wherever u have the folder and don't rename then flash the recovery that's how mine worked
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
but i dont have root... and for root my phone i need recovery
there is some other way to root?
because the ROM manager doesnt work well without root.(cant install new recovery)
Snow201 said:
but i dont have root... and for root my phone i need recovery
there is some other way to root?
because the ROM manager doesnt work well without root.(cant install new recovery)
Click to expand...
Click to collapse
I'm not telling you to use Rom manager =\
Sent from my HTC One S using xda premium
k1llacanon said:
I'm not telling you to use Rom manager =\
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Ohh. .. but still in tried install the recovery like 2-4 times.
There is other way?
Snow201 said:
Ohh. .. but still in tried install the recovery like 2-4 times.
There is other way?
Click to expand...
Click to collapse
Which recoveries have you tried, and what version of phone do you have (S3 or S4). These must match.
Make sure you bootloader unlocked OK, check in bootloader screen, should say Unlocked.
The problem youre describing sound like when you try to boot after successfully flashing a ROM but forgot to or the kernel failed to flash with it. Only happens when ROM and kernel are mismatched enough that it wont boot, fex flashing CM9 and still on HTC original kernel. Try flashing the kernel from the ROM zip file with
Code:
fastboot flash boot boot.img
You can also try booting a recovery without installing it,
Code:
fastboot boot nameofrecoveryfile.img
frdd said:
Which recoveries have you tried, and what version of phone do you have (S3 or S4). These must match.
Make sure you bootloader unlocked OK, check in bootloader screen, should say Unlocked.
The problem youre describing sound like when you try to boot after successfully flashing a ROM but forgot to or the kernel failed to flash with it. Only happens when ROM and kernel are mismatched enough that it wont boot, fex flashing CM9 and still on HTC original kernel. Try flashing the kernel from the ROM zip file with
Code:
fastboot flash boot boot.img
You can also try booting a recovery without installing it,
Code:
fastboot boot nameofrecoveryfile.img
Click to expand...
Click to collapse
nope, until now i did only unlock for my phone. and i have no idea with version i have, how do i check it?
Snow201 said:
nope, until now i did only unlock for my phone. and i have no idea with version i have, how do i check it?
Click to expand...
Click to collapse
If you have working ADB and fastboot working (there is a sticky by user fibsib that explains this) you can make sure your phone isnt really just trying to boot the OS and failing rather than trying to enter recovery with the command
Code:
adb reboot recovery
But anyways figure out which version you have before doing anything more, flash the wrong stuff and you could break stuff. There are good info here as to how to see if you have the Ville=Z520e=S4 processor model or the Ville C2/Z560e/S3 processor model.
Then download a recovery for your phone model and install it with this command from your computer
Code:
fastboot flash recovery nameofrecoveryyoudownloaded.img
Should work.
have you actually flashed a recovery yet?
which one and how did you do it?
Make sure you have your phone updated to the latest software version before you root. Download system update OTA and click update.
Otherwise you will have issues.
I am rooted T-Mobile phone with original software 1.54 and still can not do recovery or update, it is probably me but it is difficult.
If you are in the US, make sure you use the US version in the development section after you upgrade your phone. Update then try to root it might be easier.

[Q] Nexus S 4G Unlocked, Unrooted Broken Recovery

Hi,
I had before the OTA for Jelly Bean an ICS unlocked and rooted.
I tried to use ShabbyPenguin to get it rooted again but now I have a broken recovery.
So not sure what do I need to get it rooted again.. Is it possible?
Thanks!
Not positive, but could u flash cwm through adb? Then just flash a rooted ROM, or supuser.zip. Is the bootloader is still unlocked?
Haven't heard good stuff about root toolkits, its actually really easy to do for our phones.
Not sure if it is possible to flash cwm trough adb... However I will try it later today...
And yes, bootloader is still unlocked...
rustyjay said:
Not positive, but could u flash cwm through adb? Then just flash a rooted ROM, or supuser.zip. Is the bootloader is still unlocked?
Haven't heard good stuff about root toolkits, its actually really easy to do for our phones.
Click to expand...
Click to collapse
Yeah, I am positive u could use adb fast boot to flash a recovery, cwm or twrp u just need the image.
hhhmmmm... no luck yet...
I tried to flash a recovery and it keeps giving me a message
<waiting for device>
After that it seems like stuck..
I read somewhere else that maybe because of the drivers, but I already tried a couple of versions 1.3.8 and 1.5.6 with the same result...
btw I'm using a Windows 7 64 bit machine...
Not sure if use a Linux machine will have any benefit...
rustyjay said:
Yeah, I am positive u could use adb fast boot to flash a recovery, cwm or twrp u just need the image.
Click to expand...
Click to collapse
Well...
Also tried the google usb drivers with no luck....
I guess that I will try it with some other windows/linux version later today...
Off but on topic. Describe what you call a broken a recovery please.
When I try to run the recovery it appears a dead android with a red exclamation mark on the screen....
After that it takes some time to reboot again...
albundy2010 said:
Off but on topic. Describe what you call a broken a recovery please.
Click to expand...
Click to collapse
That is stock recovery. It is not broken.
Yes I was saying it was broken because before the OTA update I had twrp as recovery, and now I can't flash any recovery
albundy2010 said:
That is stock recovery. It is not broken.
Click to expand...
Click to collapse
When you flash/install a ota your recovery gets wiped back to stock once it boots up due to the flash recovery script in the stock ROM.
Nothing is wrong with your device. Just follow a real guide on how to unlock and root. Real meaning using the SDK. Or even use one of those stupid one click crap. should not have a issue.
Guides are in the forum stickies.
Hi Guys,
Well not sure what the problem was.... maybe the drivers, maybe Win7 64 bits or I don't what...
I used a WinXP machine with the pdanet installed and it worked like charm...
I succesfully installed the recovery and root again.
Anyway... thanks for your time.
Glad to hear that.

[Q] Flashing Recovery on Latest VZW Version

I had my phone bootloader unlocked, CWM loaded, and rooted. I decided I didn't really need root and was messing around so I took the VZW update which, of course, required me to flash the stock recovery.
Well, I wanted to play with the new CM 10.2 so I went to flash CWM back on using mattlgroff's utility and while I don't receive any errors and it reboots the phone, the stock recovery is still there.
Any way to flash a recovery or am I hosed? I thought it was only motochopper I couldn't use on the new VZW firmware.
theoreticaljerk said:
I had my phone bootloader unlocked, CWM loaded, and rooted. I decided I didn't really need root and was messing around so I took the VZW update which, of course, required me to flash the stock recovery.
Well, I wanted to play with the new CM 10.2 so I went to flash CWM back on using mattlgroff's utility and while I don't receive any errors and it reboots the phone, the stock recovery is still there.
Any way to flash a recovery or am I hosed? I thought it was only motochopper I couldn't use on the new VZW firmware.
Click to expand...
Click to collapse
Flash recovery manually.
Turn on USB debugging
Open the folder that has the tool files. Find the one that had adb, fastboot and aapt. Go up one folder. Hold the shift key and right click the folder that has adb etc. There is a option in the right click menu that says something to the effect of 'open in command prompt', select it. in the command prompt type: adb reboot bootloader Hit enter.
Copy the cwm img file into the folder with adb and fastboot. Go back to the command prompt. Then type fastboot flash recovery <name of recovery>.img Hit enter. If it doesnt reboot type: fastboot reboot Hit enter.
Enjoy.
Tip: when typing the name of the cwm image type the first few letters then hit tab to autocomplete the name.
Unfortunately, while the commands went through without error, it still has the stock recovery.
theoreticaljerk said:
Unfortunately, while the commands went through without error, it still has the stock recovery.
Click to expand...
Click to collapse
Bad download maybe? Give TWRP a try.
Unfortunately I did.
theoreticaljerk said:
Unfortunately I did.
Click to expand...
Click to collapse
When you go into the bootloader it does, in fact, say you are unlocked?
Sent from my DROID RAZR HD using Tapatalk 4
I was using mattlgroff's utility and the first time I tried CWM it failed. I didn't have my phone rooted, but I had the bootloaded unlocked. So, I just rooted the phone and reflashed CWM and it was fine. I think that same utility has the old software on it, so if nothing else, just flash the old software, root, and then install your recovery.
mentose457 said:
When you go into the bootloader it does, in fact, say you are unlocked?
Sent from my DROID RAZR HD using Tapatalk 4
Click to expand...
Click to collapse
It does still say UNLOCKED.
al2fast said:
I was using mattlgroff's utility and the first time I tried CWM it failed. I didn't have my phone rooted, but I had the bootloaded unlocked. So, I just rooted the phone and reflashed CWM and it was fine. I think that same utility has the old software on it, so if nothing else, just flash the old software, root, and then install your recovery.
Click to expand...
Click to collapse
I can't root because I'm on the latest VZW version.
theoreticaljerk said:
It does still say UNLOCKED.
I can't root because I'm on the latest VZW version.
Click to expand...
Click to collapse
You can flash back to the last version then root. Then you can try flashing CWM or TWRP.
EDIT: Im pretty sure they found a way to root the latest OTA.
mentose457 said:
You can flash back to the last version then root. Then you can try flashing CWM or TWRP.
EDIT: Im pretty sure they found a way to root the latest OTA.
Click to expand...
Click to collapse
Correct me if I'm wrong though...but I don't believe you need root to flash a recovery.
theoreticaljerk said:
Correct me if I'm wrong though...but I don't believe you need root to flash a recovery.
Click to expand...
Click to collapse
You shouldn't but these phones are a bit wonky when it comes to that sort of stuff. For example you dont need root to unlock the bootloader on any other phone except this one.
What does the stock recovery even look like? Ive never been there. After flashing the recovery how are you getting to recovery? Are you using the terminal or command prompt on your computer or are you holding the up/down/power combo the arrowing down to recovery and then arrowing up?
theoreticaljerk said:
I had my phone bootloader unlocked, CWM loaded, and rooted. I decided I didn't really need root and was messing around so I took the VZW update which, of course, required me to flash the stock recovery.
Well, I wanted to play with the new CM 10.2 so I went to flash CWM back on using mattlgroff's utility and while I don't receive any errors and it reboots the phone, the stock recovery is still there.
Any way to flash a recovery or am I hosed? I thought it was only motochopper I couldn't use on the new VZW firmware.
Click to expand...
Click to collapse
Ive found the solution to this if you still haven't...
You need to have root. How you get that is up to you. I flashed back to the last rootable OTA, rooted, used voodoo root keeper to backup root, then took the OTA and restored root with voodoo. Once I had root again i used Root Explorer to rename the file called recovery-from-boot.p in /system . Then I booted into fastboot mode and flashed the recovery like normal. That was it.

[Q] lg g2 problem. no answers anywhere on internet.

my rooted lg g2(d801) is in a boot loop. it can go to twrp, but when i try to reboot,poweroff etc. a screen pops up that says im not rooted install supersu. i have supersu the file shows in the file manager, and im rooted. i can go to download mode and it says im rooted.
zacktolliver said:
my rooted lg g2(d801) is in a boot loop. it can go to twrp, but when i try to reboot,poweroff etc. a screen pops up that says im not rooted install supersu. i have supersu the file shows in the file manager, and im rooted. i can go to download mode and it says im rooted.
Click to expand...
Click to collapse
Uhh maybe because you don't have an LG G2????
Looks like an M8 or something??
Just saying.
thats not my phone thats just what my phone say says in twrp.
zacktolliver said:
thats not my phone thats just what my phone say says in twrp.
Click to expand...
Click to collapse
Ahh ok,
What version of twrp is your phone using? If you have a computer you can push a newer version of twrp and flash it.
Did you flash a wrong ROM? If so which one?
Did you backup your stock rom?
I would be good to put the exact things you did before this happened so that you can get the help you need.
spec4 said:
Ahh ok,
What version of twrp is your phone using? If you have a computer you can push a newer version of twrp and flash it.
Did you flash a wrong ROM? If so which one?
Did you backup your stock rom?
I would be good to put the exact things you did before this happened so that you can get the help you need.
Click to expand...
Click to collapse
im running 2.7 twrp. i do have a computer ill look that up. no i actually was just trying to make a backup i wiped my phone )everything but internal storage) the backup failed. i tried to reboot my phone. then i got that message thats says im root rooted install supersu. then powered it off into a bootloop
zacktolliver said:
im running 2.7 twrp. i do have a computer ill look that up. no i actually was just trying to make a backup i wiped my phone )everything but internal storage) the backup failed. i tried to reboot my phone. then i got that message thats says im root rooted install supersu. then powered it off into a bootloop
Click to expand...
Click to collapse
Flash this twrp and see if it helps.
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
Also if you are going to flash another rom try flashing the latest SuperSU from here. Download the zip version.
http://forum.xda-developers.com/showthread.php?t=1538053

Categories

Resources