Hi everyone,
I'm new to this forum but have been around the block a few times when it comes to software development, albeit not at a hardware level. I've got a couple old Android phones that I'm looking to root and play around with, but I'm having some trouble with the vernacular. The first device I'm trying is the newest of the old lot, a Nexus S (crespo).
I'm trying to install the "Guru" kernel (http://forum.xda-developers.com/nexus-s/development/kernel-guru-t2783561), but can't see how <4MB would be a complete system image. Does this kernel just reflect a patch that should be applied to the CM ROM, and if so, which one? I've rooted the phone using SuperOneClick but don't know where to go from here.
Thanks for helping this noob out, guys and gals. Cheers from Australia!
onethreenine said:
Hi everyone,
I'm new to this forum but have been around the block a few times when it comes to software development, albeit not at a hardware level. I've got a couple old Android phones that I'm looking to root and play around with, but I'm having some trouble with the vernacular. The first device I'm trying is the newest of the old lot, a Nexus S (crespo).
I'm trying to install the "Guru" kernel (http://forum.xda-developers.com/nexus-s/development/kernel-guru-t2783561), but can't see how <4MB would be a complete system image. Does this kernel just reflect a patch that should be applied to the CM ROM, and if so, which one? I've rooted the phone using SuperOneClick but don't know where to go from here.
Thanks for helping this noob out, guys and gals. Cheers from Australia!
Click to expand...
Click to collapse
u much flash cm rom or cm base rom to flash this kernel
leap_ahead said:
u much flash cm rom or cm base rom to flash this kernel
Click to expand...
Click to collapse
Thanks mate. Do I download this rom from the CM site, and does it matter which version I use? Am I correct in interpreting your directions to mean that "flashing" the kernel doesn't overwrite the whole rom, just simply acts like a patch after the CM distro is flashed?
onethreenine said:
Thanks mate. Do I download this rom from the CM site, and does it matter which version I use? Am I correct in interpreting your directions to mean that "flashing" the kernel doesn't overwrite the whole rom, just simply acts like a patch after the CM distro is flashed?
Click to expand...
Click to collapse
use cm Crespo rom 4.4.2 and up
leap_ahead said:
use cm Crespo rom 4.4.2 and up
Click to expand...
Click to collapse
I'm sorry, I'm having a bit of trouble extracting the process from your answer. Can you please confirm the order I do things in?
onethreenine said:
I'm sorry, I'm having a bit of trouble extracting the process from your answer. Can you please confirm the order I do things in?
Click to expand...
Click to collapse
flash the cm rom and then flash the guru kernel
leap_ahead said:
flash the cm rom and then flash the guru kernel
Click to expand...
Click to collapse
Thanks mate.
**IMPORTANT**
-Doing a back-up is your first step
-Clean installs help avoid issues
-If you are not 100% sure what you are doing, do a SEARCH and read up on how it is done..
Sent from my Nexus S using XDA Premium 4 mobile app
Related
Im new to the android community and phones. I bought an Inspire with gingerbread (2.3.3) and would like to add cyanogenmod to it but the tutorials look so "harmfull" they scare me away so i have some question.
Can i downgrade from 2.3 to android v1?
Have anyone here rooted and flashed the same phone I have?
What is "radio? Can I change it to another one? how can I tell if it will work with my carrier?
please, please, please. READ
these questions you are asking concern me
1. you dont downgrade to v1....because it doesnt exist
2. we all have the same phone as you, otherwise we wouldnt have an inspire section
3. there is an entire thread dedicated to this very subject....look in the dev section.
there are easy to follow guides, tutorials, and walkthroughs here, but you have to READ...there is ZERO excuse for not reading and comprehending this stuff. if it is too much for you, you should NOT be doing any of it, and leave your phone stock
This is why I said..im NEW with this... none of what you helped in some way.
joandajer said:
This is why I said..im NEW with this... none of what you helped in some way.
Click to expand...
Click to collapse
then you have some READING to do. nobody here is going to hold your hand.
ALL the information you seek is already here, but you have to READ
Sorry if all you want is someone to hold your hand and spoonfeed information to you
NEW or not, it doesnt matter. I was NEW to this phone when i got it. I READ, the same way i have done with all my other phones. I READ to understand what i am doing and how to do it.
heres the first thing you should have read when you came to the inspire boards:
http://forum.xda-developers.com/showthread.php?t=1033353
its a sticky for a reason
Thanks for the link. Wil this tool The Ace Hack Kit work with 2.3.3 version? for rooting pourposes i mean?
joandajer said:
Thanks for the link. Wil this tool The Ace Hack Kit work with 2.3.3 version? for rooting pourposes i mean?
Click to expand...
Click to collapse
from the OP in the ACE Hack Kit thread:
Both stock Froyo and Gingerbread supported
Click to expand...
Click to collapse
this question has come up several times in the last month. yes it works just fine
Hi, i just rotted the unit and everything was fine
So i decided to use, cyanogenmod, it installed
now i can make calls but it does not connect to the data network portion.
Any ideas?
I noticed the radio baseband is slighly different than the original. could it be?
Sorry. was quick. i entered the APN settings and it is now connecting.. just Edge....before (stock rom) i had "H" (guessing is 3G). Now it only connects to E (edge i assume).
The weird thing is that before whenever i was in an area with only edge It would not allow me to browse but now I can.
any idea jedi master?
you can try a different radio. look at the radio thread in the dev section
Sorry to bother you so much. I was able to solve the radio issue. Now, since the market app wasn't included i followed the guide on how to install gapps but after doing so i can't get pass the boot screen "touch the android to begin".
I try to wipe and reflash but still does not let me do it. Any ideas?
did you touch the android to begin?
Yes, sir. But it will still restart.
i try to wipe data and restart the process but same thing happens.
Tried taping the four corners and an still happening.
Someone said the the gapps file might be corrupted.
Right now cyanogenmod is a pain. is there a way to install another room or the stock one through recovery?
Thanks for all your help!
joandajer said:
Yes, sir. But it will still restart.
i try to wipe data and restart the process but same thing happens.
Tried taping the four corners and an still happening.
Someone said the the gapps file might be corrupted.
Right now cyanogenmod is a pain. is there a way to install another room or the stock one through recovery?
Thanks for all your help!
Click to expand...
Click to collapse
you can install any rom you like in recovery.
boot into recovery
go to mounts and storage
mount usb storage
on your computer, copy the rom zip onto the phone
back,
install zip file from sdcard
browse to rom zip
confirm flash
Thank you. I am downloading RUU_Ace_Gingerbread_S_Cingular_US_2.47.502.7_Radio_12.56.60.25_26.10.04.03_M_release_200368_signed.exe.... is this the correct stock?
Does it have to be on ZIP? if so, where can i find stock roms?
joandajer said:
Thank you. I am downloading RUU_Ace_Gingerbread_S_Cingular_US_2.47.502.7_Radio_12.56.60.25_26.10.04.03_M_release_200368_signed.exe.... is this the correct stock?
Does it have to be on ZIP? if so, where can i find stock roms?
Click to expand...
Click to collapse
no. this will leave you an unrooted stock rom
why dont you browse the dev forum here and look at all the ROM offerings?
I think i will just go with the stock one and the do the same procedure (using the hack kit and just leave it stock rooted....
would that be ok?
joandajer said:
I think i will just go with the stock one and the do the same procedure (using the hack kit and just leave it stock rooted....
would that be ok?
Click to expand...
Click to collapse
No because you'll still have s-off just flash pirateghost's rom its similar to stock rooted and is always good
Sent from my Inspire 4G using XDA App
Nick281051 said:
No because you'll still have s-off just flash pirateghost's rom its similar to stock rooted and is always good
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Gene Poole has a very nice stock sense 3.0 rom. its very stock. mine is slightly 'themed' with some added tweaks
Thanks I will try RUU and if that does not work will download the latest one he has: PD98IMG_Ace_Cingular_US_1.84.502.11_Radio_12.39a.60.19_26.06.06.30_M_release_184324_signed.zip
joandajer said:
Thanks I will try RUU and if that does not work will download the latest one he has: PD98IMG_Ace_Cingular_US_1.84.502.11_Radio_12.39a.60.19_26.06.06.30_M_release_184324_signed.zip
Click to expand...
Click to collapse
thats not the latest rom.
are you scared of the dev forums? lol
http://forum.xda-developers.com/forumdisplay.php?f=1018
I found the following site with links to the stock firmware for the E-Ceros One smartphone. Not too sure if it actually works though, too scared to mess up my phone. However if it is the correct rom then we could use this to start developing custom roms for this phone.:good:
The website is as follows:
http://chinagadgetsreviews.blogspot.com/2014/07/download-e-ceros-one-android-422-jelly.html
***UPDATE***
It would seem that the Ulefone and the E-Ceros one are the same other than the ram. Also this phone already has a kitkat update so might be a worthwhile start for developing a custom rom for this phone.
Still a noob so going to try start rom development and learn as I go.
***UPDATE***
See Post #100 for Kitkat rom for E-Ceros.
Yeah got this phone . Has anyone updated it to kit kat.
It can be easily rooted with vroot. So a recovery would be great too to flash a custom ROM if someone could put one together, it would be amazing !
saor11 said:
It can be easily rooted with vroot. So a recovery would be great too to flash a custom ROM if someone could put one together, it would be amazing !
Click to expand...
Click to collapse
I used MTKDroidTools to load clockworkmod recovery onto mine. Now busy extracting the stock rom and then I'm going to try develop kitkat for it. Hopefully I can get it right.
Very good and cwm loaded OK with that? How did you root? Your working on a ROM wish you all the best with it !
saor11 said:
Very good and cwm loaded OK with that? How did you root? Your working on a ROM wish you all the best with it !
Click to expand...
Click to collapse
I used V-root to root, but this didnt satisfy MTKDroidTools, so I used the root function in MTKDroidTools to root it. CWM loads perfectly and works well. Can make backups etc without a hassle, only the CWM app doesn't recognise the device and so you need to tell it you manually loaded it. Thanks! Gonna need it, will be my first rom I'm working on so lets hope it goes well. Will probably just port the stock rom to someother already developed rom.
Thanks for that info and good luck
saor11 said:
Thanks for that info and good luck
Click to expand...
Click to collapse
Thanks! Just ported paranoid rom. Now to check if it works.
That was quick!
saor11 said:
That was quick!
Click to expand...
Click to collapse
Haha yeah, although dunno if I did something wrong or if there's not much different cause I couldn't see any changes after installing it. Used one of those programs on the forums which helps you port roms. Or maybe I just installed it wrong Either way, looking more into it now. lol
Sure keep trying is all you can do !
saor11 said:
Sure keep trying is all you can do !
Click to expand...
Click to collapse
Yup. And I have a working rom!!! Running MIUI now, seems stable. Will test run it for a little longer and then put up the ROM
Thanks to helloansuman from en.miui.com for his great guide. This will hopefully help me to port more roms. Anyways, lets hope the rom is polished.:good::good:
http://chinagadgetsreviews.blogspot.ro/2014/07/download-android-422-stock-firmware-for.html?m=1 ulefone u58 aka e-ceros one
Not a fan of miui myself use cm11 on my own phone. Gf has the e-ceros
saor11 said:
Not a fan of miui myself use cm11 on my own phone. Gf has the e-ceros
Click to expand...
Click to collapse
MIUI is ok, not my first choice of rom but it was the easiest. I'd rather have paranoid android rom or CM. But since it is my first rom port I'm feeling rather chuffed with myself. Now to try port something more serious.
Not knocking your work at all its a thousand times more than I have done. Congrats
saor11 said:
Not knocking your work at all its a thousand times more than I have done. Congrats
Click to expand...
Click to collapse
Thanks, and I didn't take offence. lol. Anyway, looking into that rom you posted. Maybe we can get a working kitkat rom.
I am just waiting to hear any feed back on it before updating with sp tools
saor11 said:
I am just waiting to hear any feed back on it before updating with sp tools
Click to expand...
Click to collapse
Busy trying to flash now
It Works!!!!!!!!
I am new device
I was wondering if it should install rom?There is an excellent rom recommendation for this device
Or leave Genuine 5.0.1?
Also asked if I wanted to experiment with installing rom
How do I keep the existing rum 5.0.1 repeatable always what should I do?:good:
Start in the general forum and look for rootSU's sticky roll up. Start by reading that. It'll have everything you need to know. Once you've read that if you still have questions feel free to ask.
Sent from my Nexus 5 using XDA Free mobile app
haimmalka said:
I am new device
I was wondering if it should install rom?There is an excellent rom recommendation for this device
Or leave Genuine 5.0.1?
Also asked if I wanted to experiment with installing rom
How do I keep the existing rum 5.0.1 repeatable always what should I do?:good:
Click to expand...
Click to collapse
Use MultiROM to test out various ROMs while still keeping your current setup. It's a great tool and the best way to try out new things.
_MetalHead_ said:
Use MultiROM to test out various ROMs while still keeping your current setup. It's a great tool and the best way to try out new things.
Click to expand...
Click to collapse
Isn't there a problem requiring manual edits of updater- script in lollipop ROMs?
rootSU said:
Isn't there a problem requiring manual edits of updater- script in lollipop ROMs?
Click to expand...
Click to collapse
I'm not sure. I only flashed one Lollipop ROM (N5X) via MultiROM, and the first build I flashed worked fine, but I was unable to flash newer builds so maybe that's why.
_MetalHead_ said:
I'm not sure. I only flashed one Lollipop ROM (N5X) via MultiROM, and the first build I flashed worked fine, but I was unable to flash newer builds so maybe that's why.
Click to expand...
Click to collapse
I don't user multirom so I have no first hand experience but from what I've seen, some (if not all) lollipop ROMs that are to be a secondary ROM on multirom, need an edit.
rootSU said:
I don't user multirom so I have no first hand experience but from what I've seen, some (if not all) lollipop ROMs that are to be a secondary ROM on multirom, need an edit.
Click to expand...
Click to collapse
Allow a little more about what to do?
My English is not good
How do I save an existing system to return to the future with I want !?
How do I start to install rom?
Send me here to do an application directory where to start
Thank you
Learn to walk b4 you run. Read, read and do some more Reading on MANUAL ROOT, not all in one kits. These are great. I use then but you need to know the basics of communication with your phone in fastboot, incase of mistakes.
When you are ready make a full backup and an "efs" it's important to store the efs off the phone. Not sure what it is? Get Reading)
I could of named a kit but you would not find anything out. In an emergency (which happens) you would have to start learning things you should have-at the worst time. Good luck on your journey!
howard bamber said:
Learn to walk b4 you run. Read, read and do some more Reading on MANUAL ROOT, not all in one kits. These are great. I use then but you need to know the basics of communication with your phone in fastboot, incase of mistakes.
When you are ready make a full backup and an "efs" it's important to store the efs off the phone. Not sure what it is? Get Reading)
I could of named a kit but you would not find anything out. In an emergency (which happens) you would have to start learning things you should have-at the worst time. Good luck on your journey!
Click to expand...
Click to collapse
I'm a bit of the very
I had the LG G2
I just need a link or software to backup for the Original Version
I need an explanation after this link to do to install recovery
I've found here and install rom
Request to give me what I asked for
I previously got fastboot errors
LG G2 will not turn more
Make no mistake Esau did not want to lose a device!!!
haimmalka said:
I'm a bit of the very
I had the LG G2
I just need a link or software to backup for the Original Version
I need an explanation after this link to do to install recovery
I've found here and install rom
Request to give me what I asked for
I previously got fastboot errors
LG G2 will not turn more
Make no mistake Esau did not want to lose a device!!!
Click to expand...
Click to collapse
You have a lg G2? This is the nexus 5 forum. Don't flash any files you find in this forum. There is a forum for the G2
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You have a lg G2? This is the nexus 5 forum. Don't flash any files you find in this forum. There is a forum for the G2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I had the LG G2 lol
Now I have a nexus 5
Please tell me what to do how to get started I want to Esau Tat has been
haimmalka said:
I had the LG G2 lol
Now I have a nexus 5
Please tell me what to do how to get started I want to Esau Tat has been
Click to expand...
Click to collapse
The first thing you need to do is install a custom recovery. Use twrp. Once you have that installed make a backup of your device with it. Then you can install a rom.
http://forum.xda-developers.com/showthread.php?p=47025283
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
The first thing you need to do is install a custom recovery. Use twrp. Once you have that installed make a backup of your device with it. Then you can install a rom.
http://forum.xda-developers.com/showthread.php?p=47025283
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Okay I'll try it
I do a backup before all?
haimmalka said:
Okay I'll try it
I do a backup before all?
Click to expand...
Click to collapse
It's always a good idea to do a backup of your device before you start to modify your phone.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
It's always a good idea to do a backup of your device before you start to modify your phone.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Can you help me through TeamViewer?
I pay you for this money
All the files on your computer
Just get in my computer with TeamViewer
Do this to mehttp://forum.xda-developers.com/google-nexus-5/general/guide-nexus-5-how-to-unlock-bootloader-t2507905/post47025283#post47025283
Seriously?
If you can't manage to do this on your own and don't even want to learn how, then you shouldn't be here.
Lethargy said:
Seriously?
If you can't manage to do this on your own and don't even want to learn how, then you shouldn't be here.
Click to expand...
Click to collapse
I do not know good English language to understand it
What Afct you what I ask who wants to help will help those who do not want to not help me
You do not need to be here and I Ro
haimmalka said:
I do not know good English language to understand it
What Afct you what I ask who wants to help will help those who do not want to not help me
You do not need to be here and I Ro
Click to expand...
Click to collapse
If you don't understand how to do something yourself, aren't willing to learn, and just want someone to do it for you, I suggest you don't do it at all.
Lethargy said:
If you don't understand how to do something yourself, aren't willing to learn, and just want someone to do it for you, I suggest you don't do it at all.
Click to expand...
Click to collapse
םok ok by
haimmalka said:
Can you help me through TeamViewer?
I pay you for this money
All the files on your computer
Just get in my computer with TeamViewer
Do this to mehttp://forum.xda-developers.com/google-nexus-5/general/guide-nexus-5-how-to-unlock-bootloader-t2507905/post47025283#post47025283
Click to expand...
Click to collapse
Got your pm. I don't respond to pm's nor do I do team viewer. It's not that hard to do. Hardest part is setting up adb/fastboot. Google 15 second adb install xda and skip the first part of the guide where you setup sdk.
Sent from my Nexus 5 using XDA Free mobile app
AS the name implies this is a stock rooted Android 5.1 - LMY47O Lollipop ROM!
The one we have been waiting for!
Features
100% Stock
Rooted / Powered by SuperSU by @Chainfire!
Busybox
No other edits
FSTRIM on install
Notes:
Should update bootloader. It is attached as a ZIP file but is not flashable! You need to fastboot flash it. For those in windows I have batch file in there along with ADB and fastboot.
First boot is a loooooooooooong time! About 5 to 7 minutes!
You must be on Latest TWRP to enjoy this ROM. No other recoveries supported however they may work.
Troubleshooting
If you get no status bar reboot to recovery and clear all cache. If that doesnt work try flashing the factory image then flash TWRP again and then this ROM.
Getting Symlinks failed during install? Make sure /system is unchecked in TWRP mounts
Problems with internal storage? Look at THIS POST for fix by @freakzapster
MOD EDIT: Link removed as domain has expired. Thread closed until new links can be installed
[/CENTER]
Sharing Policy
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credit!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
Hit Thanks!
One for the road!
Dont forget to hit thanks :angel:
Maybe @GROGG88 will make a bootloader that can be flashed in recovery :highfive:
Is it ok to dirty flash , coming from latest CleanROM?
skn-xda said:
Is it ok to dirty flash , coming from latest CleanROM?
Click to expand...
Click to collapse
Should not be an issue... However, make a nandroid back up first!
Nice to have you back and to have my tablet back on Clean rom and 5.1 as well.
scrosler said:
Maybe GROGG88 will make a bootloader that can be flashed in recovery :highfive:
Click to expand...
Click to collapse
I'm transitioning careers, buying a new home, and moving across multiple states... So, I wouldn't count on it right now.
On the positive side. This gives everyone the motivation to learn how to use fastboot... A knowledge that should precede flashing ROMs anyways. :laugh:
Thanks for this!
Please please please could someone make a recovery flashable bootloader as I don't own a PC but need to update my bootloader thanks in advance
Sent from my Nexus 7 using XDA Free mobile app
toonarmy4life said:
Please please please could someone make a recovery flashable bootloader as I don't own a PC but need to update my bootloader thanks in advance
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
+1 please. I am too stupid to make such a file
Guys, do I need to flash ROM again if I update the bootloader? Will my data be wiped?
matcho13579 said:
Guys, do I need to flash ROM again if I update the bootloader? Will my data be wiped?
Click to expand...
Click to collapse
No. No, if nexus is unlocked.
Recently updated bootloader to 04-05 ("fastboot flash bootloader bootloader-flo-flo-04.05.img") still staying on 4.4.4 KTU84P, waiting for 5.1.1+Xposed.
GROGG88 said:
I'm transitioning careers, buying a new home, and moving across multiple states... So, I wouldn't count on it right now.
On the positive side. This gives everyone the motivation to learn how to use fastboot... A knowledge that should precede flashing ROMs anyways. :laugh:
Click to expand...
Click to collapse
Thats impressive. I am going in for major surgery on Monday! This may be my last post for a while!
Could someone tell me how I can flash that new bootloader without a PC? Sorry for being a pest lol
Sent from my Nexus 7 using XDA Free mobile app
Would I have to do anything special if I already have the paid version of Stericson's busybox installed?
Thanks so much Scott for making these ROMs and good luck on your surgery!
scrosler said:
Thats impressive. I am going in for major surgery on Monday! This may be my last post for a while!
Click to expand...
Click to collapse
I hope it goes well and gets you in a better state.
scrosler said:
Thats impressive. I am going in for major surgery on Monday! This may be my last post for a while!
Click to expand...
Click to collapse
Dont worry man, youll get well very soon and back again for Clean Rom
Best wishes Scott and Grogg !!
Thanks
Q&A for Gnabo ROM X Tab S feature
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Gnabo ROM X Tab S feature. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I'm running a old version of Hyperdrive v6 on a N8013 Android 4.1.2. According to rootchecker, my bootloader is N8013UEUCMC2 and Kernel version is 3.0.31-813049.
I was looking at Gnabo's thread and I'm wondering if I need to flash any of these, Kernel for N801X, WiFi Fix for N801X and Remove phone stuff for N801x, or are those already included in your ROM?
Thanks
dax711 said:
I'm running a old version of Hyperdrive v6 on a N8013 Android 4.1.2. According to rootchecker, my bootloader is N8013UEUCMC2 and Kernel version is 3.0.31-813049.
I was looking at Gnabo's thread and I'm wondering if I need to flash any of these, Kernel for N801X, WiFi Fix for N801X and Remove phone stuff for N801x, or are those already included in your ROM?
Thanks
Click to expand...
Click to collapse
all are include in the rom
AhmedSafian said:
all are include in the rom
Click to expand...
Click to collapse
Thanks!! Can;t wait to finally get off 4.1.2
dax711 said:
Thanks!! Can;t wait to finally get off 4.1.2
Click to expand...
Click to collapse
Just to let you know I had to install the wifi fix after installing your rom. I haven't had time to play with it too much but so far it seems to run very smoothly
dax711 said:
Just to let you know I had to install the wifi fix after installing your rom. I haven't had time to play with it too much but so far it seems to run very smoothly
Click to expand...
Click to collapse
I was wondering, you know that page with 6 sections that shows news and side sync. How do I open the news stories? I figured out that you can flip up and down to scroll through different stories but can't figure out how to open the story.
Also, this isn't related to your rom but I've been out of the loop for awhile, can you tell me what is the best current solution for installing flash for websites.
Thanks again, I've been using it a lot for the last few hours after I got wifi working and I'm really loving it!
hi
What recovery you use?
I tried to philz recovery and the TWRP, but the installation takes only a few seconds and nothing in this device.
Sorry for my english...
Long time gnabo fan here, eagerly waiting for V5.
santosrps123 said:
hi
What recovery you use?
I tried to philz recovery and the TWRP, but the installation takes only a few seconds and nothing in this device.
Sorry for my english...
Click to expand...
Click to collapse
I used CWM
dax711 said:
I used CWM
Click to expand...
Click to collapse
What version of CWM did you use ?
electrikjesus said:
What version of CWM did you use ?
Click to expand...
Click to collapse
6.0.1.1
dax711 said:
I was wondering, you know that page with 6 sections that shows news and side sync. How do I open the news stories? I figured out that you can flip up and down to scroll through different stories but can't figure out how to open the story.
Also, this isn't related to your rom but I've been out of the loop for awhile, can you tell me what is the best current solution for installing flash for websites.
Thanks again, I've been using it a lot for the last few hours after I got wifi working and I'm really loving it!
Click to expand...
Click to collapse
you just can click on the story if you were installed flipboard
and for flash you can also google it and installed like any apk
AhmedSafian said:
you just can click on the story if you were installed flipboard
and for flash you can also google it and installed like any apk
Click to expand...
Click to collapse
Thanks, everything still running smoothly.
Lost Root
Can anyone point me to the proper files and procedure to get this Rom Rooted?
I came from Gnabo8 Rooted and TWRP.
I need to get the Root back.
Thanks,
I think, he testing our patience
ronimus said:
Can anyone point me to the proper files and procedure to get this Rom Rooted?
I came from Gnabo8 Rooted and TWRP.
I need to get the Root back.
Thanks,
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1831152
Just follow method 2 and you should get root.
No working 3G?
Hi, it is possible to enable N8000 data network with Gnabo rom X tab S?
I'm really enjoying it, thank you!
sorry my poor english,
Tab S Sensation ROm Will Not Install
When I try to install this ROM, I get the following error, am using PhilZ Touch 6 recovery CWM 6.0.4.7.
The error is;
format () expects 5 args, got 4
E:Error in /data/media/0/download_rom/TAB.S.Sensation.V6.n801x.zip
(status 7)
Installation aborted.
I did a Wipe Data/Factory Reset. My internal storage has about 1/6 G free, and the SDCARD has about 2 G free.
What could be wrong, I have downloaded the ROM twice now.
Any suggestion appreciated.
Thanks
what is your device?
try you first apply Gnabo rom? :good:
@AhmedSafian thank you for your hard work. This ROM is definitely the one that made my tab look new. Just wanted to report few things.
(N8013)
1) xposed is not pre-installed? If ever I'll do it manually, which version would you recommend.
2) I installed a HULU app since I do have an account with them, (it's like Netflix) it doesn't run. Any suggestions on what to do with it?
3) Is Sound Alive better than (Dolby Digital)?
Sent from my SM-G9250 using Tapatalk