Related
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
wipe cacche dalvik cache , factory reset
flash the ROM again
again wipe all...:good::fingers-crossed:
try it
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
You shld ask this in dev section under angeeks ROM thread
vipul12389mehta said:
You shld ask this in dev section under angeeks ROM thread
Click to expand...
Click to collapse
Hey buddy, he is not able to post in Dev section due to NewBie.
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
Hey have u flashed the rom on some other kernal if yes den try flashing the nordic firmware(XXLQ9) n den flash the rom
Hit thanks if i helped you
hasanjaved said:
wipe cacche dalvik cache , factory reset
flash the ROM again
again wipe all...:good::fingers-crossed:
try it
Click to expand...
Click to collapse
I have done than before and after flashing the ROM, but will give it another try
Thanks
Kartik pat said:
Hey have u flashed the rom on some other kernal if yes den try flashing the nordic firmware(XXLQ9) n den flash the rom
Hit thanks if i helped you
Click to expand...
Click to collapse
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Badboy800 said:
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Click to expand...
Click to collapse
Can you please explain the steps in detail which you have followed, so that i can try to help...
Badboy800 said:
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Click to expand...
Click to collapse
Ill tell u my steps what i did:
First i reverted back to gb using cwm backup den i did a factory reset n wiped cache.. Den i flashed the stock nordic firmware n den flashed the rom n before rebooting the device i wiped cache n delvik cache.. And it worked for me try dis if i want to
Hit thanks if i helped you
mj.vikram said:
Can you please explain the steps in detail which you have followed, so that i can try to help...
Click to expand...
Click to collapse
Okey, i came from Blueberry ROM 1.0 and here is the steps i followed:
1: Flashed the Nordic I9103XXLQ9 ROM USIN Odin v3.07
2. Booted up once to the rom to check if its had installed correctly
3. Flashed CMW 4.0.0.1 with Odin
4. Done a factory reset, wiped cache and dalvik cache
5. Flashed the Rom and after the process was complete from CMW, i restarted the phone but got stock on the Galaxy R splash screen and the phone restarted back to CMW.
6. Tried to wipe cache and dalvic cache again but still the phone wont boot up.
its so weird!
Kartik pat said:
Ill tell u my steps what i did:
First i reverted back to gb using cwm backup den i did a factory reset n wiped cache.. Den i flashed the stock nordic firmware n den flashed the rom n before rebooting the device i wiped cache n delvik cache.. And it worked for me try dis if i want to
Hit thanks if i helped you
Click to expand...
Click to collapse
Yes that may work, i will try it today.
Thanks buddy
Badboy800 said:
Okey, i came from Blueberry ROM 1.0 and here is the steps i followed:
1: Flashed the Nordic I9103XXLQ9 ROM USIN Odin v3.07
2. Booted up once to the rom to check if its had installed correctly
3. Flashed CMW 4.0.0.1 with Odin
4. Done a factory reset, wiped cache and dalvik cache
5. Flashed the Rom and after the process was complete from CMW, i restarted the phone but got stock on the Galaxy R splash screen and the phone restarted back to CMW.
6. Tried to wipe cache and dalvic cache again but still the phone wont boot up.
its so weird!
Click to expand...
Click to collapse
Are you selecting Install zip file/update from Zip option in CWM, Sorry for asking the silly Question because i just want to confirm it...
mj.vikram said:
Are you selecting Install zip file/update from Zip option in CWM, Sorry for asking the silly Question because i just want to confirm it...
Click to expand...
Click to collapse
Its okey Yess i do. I manage to flash it from both cmw versions so i dont think the problem is there. Should i go back to GB and then try the process?
Badboy800 said:
Its okey Yess i do. I manage to flash it from both cmw versions so i dont think the problem is there. Should i go back to GB and then try the process?
Click to expand...
Click to collapse
First, u are coming from deodexed Rom.
Do one thing.. just install ur backup(if u took that one). Then install xxql9 using odin v 3.07(do run as administrator) & Then let it boot. Switch off the mobile and After that install CMW v4 & Then let it boot again. Again switch off ur mobile. Go to recovery install MOD rom. Dont wipe anything. It will do it by itself. Boot again. Let feel happy..
Sent from my GT-I9103 using xda premium
How to install this rom on stock GB?
I am currently on stock GB (Indian vesion). Can I directly flash this rom via CWM 4?? The Q&A in rom's post says there is no need to flash XXLQ9 first, but everyone is suggesting to flash that first?
vivekmaru said:
I am currently on stock GB (Indian vesion). Can I directly flash this rom via CWM 4?? The Q&A in rom's post says there is no need to flash XXLQ9 first, but everyone is suggesting to flash that first?
Click to expand...
Click to collapse
Yaa it will be better if you flash XXLQ9 first and then the rom so that u can enjoy all the features!!
Hit Thanks If I Helped You
Kartik pat said:
Yaa it will be better if you flash XXLQ9 first and then the rom so that u can enjoy all the features!!
Hit Thanks If I Helped You
Click to expand...
Click to collapse
Well.. I already flashed the Angeek's ROM via CMW before you replied and the ROM seem to work fine. Any idea on what features I may be missing on?
Hello All
This is my first Post i was experimenting with my Phone(HTC Pico(Explorer)) and installing new roms now my phone is not accepting any customised rom only stock rom it is accepting but with a internal memory problem. And by mistake i did Factory reset in Recovery Mode
PLease help me how to fix it i want to install custom rom and want to increase Internal Memory.
Previously Rom which i installed is Explode by rishik999
Thanks in Advance
deejay18590 said:
Hello All
This is my first Post i was experimenting with my Phone(HTC Pico(Explorer)) and installing new roms now my phone is not accepting any customised rom only stock rom it is accepting but with a internal memory problem. And by mistake i did Factory reset in Recovery Mode
PLease help me how to fix it i want to install custom rom and want to increase Internal Memory.
Previously Rom which i installed is Explode by rishik999
Thanks in Advance
Click to expand...
Click to collapse
Install this Rom http://forum.xda-developers.com/showthread.php?t=2409628 :good:
Have you checked your nand, what do you meen by not accepting?
use cyanogenmod 9 if you are new to flashing Roms with Mounts2sd...
shortyoko said:
Have you checked your nand, what do you meen by not accepting?
Click to expand...
Click to collapse
Accepting means its not booting with any ROM except Stock ROM
deejay18590 said:
Hello All
This is my first Post i was experimenting with my Phone(HTC Pico(Explorer)) and installing new roms now my phone is not accepting any customised rom only stock rom it is accepting but with a internal memory problem. And by mistake i did Factory reset in Recovery Mode
PLease help me how to fix it i want to install custom rom and want to increase Internal Memory.
Previously Rom which i installed is Explode by rishik999
Thanks in Advance
Click to expand...
Click to collapse
its the first n main rule..aftr u root ur phone dont factory reset evn by mistake..
now..how many roms u flashed?..
Try this: 1- Goto recovery
2- wipe data/factory reset
3- wipe cache
4- goto advanced>wipe dalvik cache
5- goto mounts & storage> wipe boot
6- wipe system
and then install a new rom..try cm9 build 11, use mounts2sd or flash jaggyrom.
amit.lohar said:
its the first n main rule..aftr u root ur phone dont factory reset evn by mistake..
now..how many roms u flashed?..
Click to expand...
Click to collapse
Almost 20 ROMS i flashed and previous kernel was yannou and now i am using TWRP so is their any way to use custom rom
Need urgent help
i had rooted my pico months back and was on different custom roms......now i want 2 get back to the stock rom which i have downloaded Odexed Stock ROM Flashable Zip (With Link2SD Support)(Revision 3)(http://forum.xda-developers.com/show...4&postcount=76) and i have flashed this rom 5 - 10 times and everytime i reboot after flashing the rom..(i have an 8 gb class 4 sd card which has an 512 mb ext3/4 partition and i had once factory reseted from the option in bootloader)...i am stuck on htc boot logo.....can u plssssss help
hitanshu.bachawat said:
i had rooted my pico months back and was on different custom roms......now i want 2 get back to the stock rom which i have downloaded Odexed Stock ROM Flashable Zip (With Link2SD Support)(Revision 3)(http://forum.xda-developers.com/show...4&postcount=76) and i have flashed this rom 5 - 10 times and everytime i reboot after flashing the rom..(i have an 8 gb class 4 sd card which has an 512 mb ext3/4 partition and i had once factory reseted from the option in bootloader)...i am stuck on htc boot logo.....can u plssssss help
Click to expand...
Click to collapse
have you tried jaggyrom?
Affangta said:
Try this: 1- Goto recovery
2- wipe data/factory reset
3- wipe cache
4- goto advanced>wipe dalvik cache
5- goto mounts & storage> wipe boot
6- wipe system
and then install a new rom..try cm9 build 11, use mounts2sd or flash jaggyrom.
Click to expand...
Click to collapse
Try this. And to make it easy install Philz recovery.
Need urgent help
Affangta said:
have you tried jaggyrom?
Click to expand...
Click to collapse
Yes.....it also got stuck on htc boot logo
i m using grand 4.1.2 rom by mms andy.. i want to install lejoice turbo v3.1 rom.. but don't know how to add the boot.img and also which one to use.. plzz help with complete flashing process
ankur_35 said:
i m using grand 4.1.2 rom by mms andy.. i want to install lejoice turbo v3.1 rom.. but don't know how to add the boot.img and also which one to use.. plzz help with complete flashing process
Click to expand...
Click to collapse
hi..u just download rom and place boot.img in it using any archiver then copy it to sd card main and then flash it in recovery by wiping data and dalvik cache
thanks for ur reply.. but could u give the link of the boot. img...
The best and simplest way is simply first flash rom via clockwork mod following the same procedure you follow while flashing any rom.
I.e. wipe data,cache and delvic cache.
Then flash any kernel of you choice like a simple clockwork flashable zip. That is no wipes needed.
Then reboot and you are done bro.
hello guys,
i have micromax a110, canvas 2, with ics 4.0.4. i tried to flash xr650 http://forum.xda-developers.com/showthread.php?t=2238818 but upon restarting it gets stuck at boot logo. this is my first time flashing rom. i have followed the exact steps mentioned there but still not able to flash it. if i am missing any steps or i need to flash kernel and how to do it...
Is your device rooted?
ruchir500 said:
hello guys,
i have micromax a110, canvas 2, with ics 4.0.4. i tried to flash xr650 http://forum.xda-developers.com/showthread.php?t=2238818 but upon restarting it gets stuck at boot logo. this is my first time flashing rom. i have followed the exact steps mentioned there but still not able to flash it. if i am missing any steps or i need to flash kernel and how to do it...
Click to expand...
Click to collapse
Hi ruchir500,
I can help you in installing this custom ROM properly but before that can you tell me - is your handset rooted?
How exactly you flashed this XR650 ROM in your device? I know you followed the same steps as mentioned in the post but if you would provide the exact steps you tried may help me and you to resolve the issue in a better way.
Regards,
Abhinav P
Re:[Q]need help flashing custom rom
ruchir500 said:
hello guys,
i have micromax a110, canvas 2, with ics 4.0.4. i tried to flash xr650 http://forum.xda-developers.com/showthread.php?t=2238818 but upon restarting it gets stuck at boot logo. this is my first time flashing rom. i have followed the exact steps mentioned there but still not able to flash it. if i am missing any steps or i need to flash kernel and how to do it...
Click to expand...
Click to collapse
I will suggest three things. The first is that you reflash again.Take note if there is an instruction for you to wipe CACHE and DALVIK CACHE in the ROM. Doing this anyway often helps. Some Devs sometimes omit to mention this in the OP, but it will be in the ROM itself. Sometimes, doing a factory reset or data wipe will remove the bootloop. And secondly try another ROM. Aromatic BUMBLEBEE and Blackpearl are the two best 4.1.1 ROMs after MICROFIRE 3.2.
@B#! said:
Hi ruchir500,
I can help you in installing this custom ROM properly but before that can you tell me - is your handset rooted?
How exactly you flashed this XR650 ROM in your device? I know you followed the same steps as mentioned in the post but if you would provide the exact steps you tried may help me and you to resolve the issue in a better way.
Regards,
Abhinav P
Click to expand...
Click to collapse
hi abhinav,
ya.. my device is rooted...i was flashing rom for the first time, i tried to flash it by cwm recovery..
steps which i followed were..
went to cwm recovery
Wipe Data/Factory Reset. wipe partion cache
Goto Mounts & Storage -> Format /system
Goto Advanced -> Clead Dalvik Cache
Install xr650 zip from SD card
thats it...
then rebooted..and got stuck in boot logo..
so i restored back to my original rom via backup..
Benelshaddai said:
I will suggest three things. The first is that you reflash again.Take note if there is an instruction for you to wipe CACHE and DALVIK CACHE in the ROM. Doing this anyway often helps. Some Devs sometimes omit to mention this in the OP, but it will be in the ROM itself. Sometimes, doing a factory reset or data wipe will remove the bootloop. And secondly try another ROM. Aromatic BUMBLEBEE and Blackpearl are the two best 4.1.1 ROMs after MICROFIRE 3.2.
Click to expand...
Click to collapse
i followed the steps carefully and wiped cache and dalvik cache and did a factory reset and data wipe also...but still gets stuck in boot logo...
i will surely try the roms whcih u have mentioned..
thanks..
is it the kernel i m missing??
guys.. i read many posts and comments.. it seems it might be the issue with kernel.. i havent flashed any kernel with my custom rom..i have seen people dont talk abt it in their rom post, it might be prohibited.. how to know which kernel to install for a rom.?
Try Xtreme Rejoice Kernel
ruchir500 said:
guys.. i read many posts and comments.. it seems it might be the issue with kernel.. i havent flashed any kernel with my custom rom..i have seen people dont talk abt it in their rom post, it might be prohibited.. how to know which kernel to install for a rom.?
Click to expand...
Click to collapse
Hi ruchir500,
Here are some steps you must follow while installing any new custom ROM:
Your device is already rooted so you can continue with the following steps:
1) Goto CWM --> install zip from SD card --> select the ROM zip file --> it will start installing the ROM
2) Then --> Wipe data/factory reset --> Wipe cache partition --> then goto --> advanced--> Wipe dalvik cache --> Wipe battery stats
3) Go back--> reboot system now.
Hope this helps. And if doesn't help try:
1) Download Xtreme Rejoice Kernel zip file from here: http://d-h.st/87R, transfer to SD card
2) Install this ROM with the same steps as mentioned above for the ROM installation
If these steps doesn't help, try both the steps without rebooting the system or CWM > after completing both the steps reboot system.
Let me know if this helps.
@B#! said:
Hi ruchir500,
Here are some steps you must follow while installing any new custom ROM:
Your device is already rooted so you can continue with the following steps:
1) Goto CWM --> install zip from SD card --> select the ROM zip file --> it will start installing the ROM
2) Then --> Wipe data/factory reset --> Wipe cache partition --> then goto --> advanced--> Wipe dalvik cache --> Wipe battery stats
3) Go back--> reboot system now.
Hope this helps. And if doesn't help try:
1) Download Xtreme Rejoice Kernel zip file from here: http://d-h.st/87R, transfer to SD card
2) Install this ROM with the same steps as mentioned above for the ROM installation
If these steps doesn't help, try both the steps without rebooting the system or CWM > after completing both the steps reboot system.
Let me know if this helps.
Click to expand...
Click to collapse
thanks bro,,
it seems i was not installing the kernel...
once i installed it... it was good to go..
thanks again....
;Its my first thread on xda
ROM Name- CleanKat V4.0
Device- Huawei Honor Holly (Ported it from Walton Primo GF2)
ROM Developer- Umang Leekha
ROM Porter- Waseem Maya
For Internal Storage Bug Fixing - Muhammad Waqas Hameed
If I forgot someone then tell me....!
Features
1. Based on AOSP KITKAT
2.Better battery life than other KK
ROMs, stock kernel
3.Added data traffic monitor in settings,
you can toggle it
4.Added 13 new battery icon styles in
settings, ported from carbon rom
5.Beautiful Cleankat lockscreen,
screenshot attached
6.Beautiful Cleankat bootanimation and
bootlogo
7.Cleankat music player, advanced
calculator and browser
And....!
And.........!
And...............!
Many More.............!
Now Come to the main thread...!
Hello Guys....!
Now presenting You CLEAN KAT V4 for HUAWEI HONOR HOLLY
PURE AOSP 4.4 (Kitkat)
Ported by Waseem Maya (ME)
Instructions to Install:
Go Into Philz Touch Recovery
Select Wipa & Data
Select Clean To Install a New Rom
Select Install Zip from SD Card
Select Clean Kat V4
Install it....
Done
After Install
Clear Cache & Dalvik Cache
Bugs:
It has no bug...!
Engineering Mode:
MTK Enginnering Mode APK Iin Attachment....!
you can increase sound level of your phone in Engineering Mode...!
If you found any bugs please inform me.....!
Download Link:
http://d-h.st/1w68
Please add this rom on Huawei Honor Holly main page
Great work! Can you list the features of this ROM?
fiorezy said:
Great work! Can you list the features of this ROM?
Click to expand...
Click to collapse
Ok wait
Sent from my Hol-U19 using Tapatalk
thanks for your accomplishment
does it support Arabic language completely
does it include GAPPS or i need to flash them seperately
can i install it thru twrp recovery ? if yes how ?
best regards
I dont know if it supports Arabic or not and you dont need flash gapps its already included yes you can flash using twrp band do wipe data factory reset and install after install clear cache and dalvik cache.... Now reboot...! Done
Sent from my Hol-U19 using Tapatalk
waseemmayaa said:
I dont know if it supports Arabic or not and you dont need flash gapps its already included yes you can flash using twrp band do wipe data factory reset and install after install clear cache and dalvik cache.... Now reboot...! Done
Sent from my Hol-U19 using Tapatalk
Click to expand...
Click to collapse
how can i check if it support Arabic before flashing it ? any idea
musafercom said:
how can i check if it support Arabic before flashing it ? any idea
Click to expand...
Click to collapse
I'm gonna test it then I will tell you
fiorezy said:
I'm gonna test it then I will tell you
Click to expand...
Click to collapse
Bootloop
EDIT: I fixed it after changing boot.img with stock.
Great ROM and very smooth, btw it SUPPORTS ARABIC!
fiorezy said:
Bootloop
EDIT: I fixed it after changing boot.img with stock.
Great ROM and very smooth, btw it SUPPORTS ARABIC!
Click to expand...
Click to collapse
CAN YOU EXPLAIN MORE.
JUST TO MAKE SURE DOES IT SUPPORT ARABIC FULLY.
WHAT IS btw ?
I AM ON STOCK ROM
MY DEVICE IS ROOTED AND ON TWRP RECOVERY WHAT SHOULD I DO IN STEPS TO FLASH THIS ROM WITHOUT GETTING STOCK IN A BOOT LOOP IF YOU GREATLY RECOMMEND THE ROM AND ITS STABLE WITHOUT BUGS AND HOW TO GO BACK TO STOCK ROM IF I DO NOT LIKE OR IF SOMETHING GO WRONG.
THANKS & BEST REGARDS
musafercom said:
CAN YOU EXPLAIN MORE.
JUST TO MAKE SURE DOES IT SUPPORT ARABIC FULLY.
WHAT IS btw ?
I AM ON STOCK ROM
MY DEVICE IS ROOTED AND ON TWRP RECOVERY WHAT SHOULD I DO IN STEPS TO FLASH THIS ROM WITHOUT GETTING STOCK IN A BOOT LOOP IF YOU GREATLY RECOMMEND THE ROM AND ITS STABLE WITHOUT BUGS AND HOW TO GO BACK TO STOCK ROM IF I DO NOT LIKE OR IF SOMETHING GO WRONG.
THANKS & BEST REGARDS
Click to expand...
Click to collapse
btw= by the way
I already tried this ROM and i'm sure that it fully supports Arabic, It was very smooth and handy, I used it for short minutes then I went back to MIUI because I didn't like the full grey design.
To install it, first at all, copy the zip file on your SD card, Boot into recovery mod, backup you current ROM to SD card in case something wrong happened. After that, wipe data and cache then flash Clean Kat, finally wipe dalvik cache and tap reboot system.
In case you got bootloop or you didn't like Clean Kat, just go back to twrp and restore your backup.
fiorezy said:
btw= by the way
i already tried this rom and i'm sure that it fully supports arabic, it was very smooth and handy, i used it for short minutes then i went back to miui because i didn't like the full grey design.
To install it, first at all, copy the zip file on your sd card, boot into recovery mod, backup you current rom to sd card in case something wrong happened. After that, wipe data and cache then flash clean kat, finally wipe dalvik cache and tap reboot system.
In case you got bootloop or you didn't like clean kat, just go back to twrp and restore your backup.
Click to expand...
Click to collapse
do i need to fatctory reset ?
Does that mean i do not need stock recovery to do that.
How to go to twrp recovery if i got a bootloob
musafercom said:
do i need to fatctory reset ?
Does that mean i do not need stock recovery to do that.
How to go to twrp recovery if i got a bootloob
Click to expand...
Click to collapse
Don't do factory reset, just install twrp first
Go to this thread and you will find many useful things
fiorezy said:
don't do factory reset, just install twrp first
go to this thread and you will find many useful things
Click to expand...
Click to collapse
i have twrp already
thanks
How was the rom ( CleanKat ) now I am porting Resurrection Remix 5.1.1 for HHH but there are bugs in it....!
Sent from my Hol-U19 using XDA Free mobile app
waseemmayaa said:
How was the rom ( CleanKat ) now I am porting Resurrection Remix 5.1.1 for HHH but there are bugs in it....!
Sent from my Hol-U19 using XDA Free mobile app
Click to expand...
Click to collapse
Clean Kat was very smooth, no bugs so far, didn't use it for much time, but I think everything is working fine, besides a liitle bug when scrolling through Download files, and there is no option to disable soft keys.
You can disable it by editing build.prop
Sent from my Hol-U19 using XDA Free mobile app
Help me pls. My phone is on bootloop after flashing cleankat rom. How can i replace the boot.img of cleankat rom to stock boot.img?i have no.pc,only phone. I tried moving stock boot.img to cleankat rom using xplore but it corrypt the zip file. Pls help
yuansmart said:
Help me pls. My phone is on bootloop after flashing cleankat rom. How can i replace the boot.img of cleankat rom to stock boot.img?i have no.pc,only phone. I tried moving stock boot.img to cleankat rom using xplore but it corrypt the zip file. Pls help
Click to expand...
Click to collapse
Give me your stock boot.img, I will try to upload for you the whole ROM tomorrow
How can i fimd my stock boot.img?pls