TF700 just vibrates on boot - does not stop - Asus Transformer TF700

same thread in the troubleshooting forum. sorry!!!!

...

loner. said:
Have you thought of maybe changing back to a custom rom?
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
I can't get to installing a new ROM as I can't get to the bootloader. Also, as the thing is not booting, the device is not recognized on my computer.
Any other way?

...

loner. said:
Can you power down the device? Your computer has the adb drivers installed, obviously if it detected the device before. Try to power down the device or a hard boot.
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
I believe it is powered down. How would I make use of this now?

...

loner. said:
By pressing the power button and the the volume up should get you into the bootloader.
You can search XDA forums on using fastboot and adb if you still need more information. ?
Sent from my ASUS Transformer Pad TF700T
Click to expand...
Click to collapse
Unfortunately, as you may have read in my problem, when I press the power+vol up, I get a vibration and then blank screen. Nothing. So I don't see the bootloader.
Could it be that my screen is not lighting up?

...

loner. said:
Its starting to sound like a hardware problem. are you sure you have gotten it to power off?
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
I seems to be. There is no vibration or anything.

How can I make sure it is completely off??
Also, I connected the tablet to my tv with micro hdmi and nothing popped up ... the tablet kept vibrating.

NOw the tablet does not start at all!!!!!!!!!!!!!!!!

Related

Bootloop

hey guys, i got a bootloop. usually i can get into recovery through adb, but this time my device isnt showing. is there an alternative i can use likeodin or something?
bestofrhcp said:
hey guys, i got a bootloop. usually i can get into recovery through adb, but this time my device isnt showing. is there an alternative i can use likeodin or something?
Click to expand...
Click to collapse
power + volume up, then use 'fastboot devices' in adb see if it comes up.
Billchen0014 said:
power + volume up, then use 'fastboot devices' in adb see if it comes up.
Click to expand...
Click to collapse
Power+up is good for boot loops but if you have a recovery installed you can access it through the boot loader menu
Sent from my Nexus S 4G using Xparent Red Tapatalk 2
ebs512 said:
Power+up is good for boot loops but if you have a recovery installed you can access it through the boot loader menu
Sent from my Nexus S 4G using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
No, stay on the bootloader interface, don't press anything, connect it to ur PC and type this in adb: fastboot devices see if you can see your phone's serial number.
oops! accidentally beamed from my awesome NEXUS S!
It doesn't show my device in the list on adb Command or fastboot
Sent from my Nexus One using XDA
bestofrhcp said:
It doesn't show my device in the list on adb Command or fastboot
Sent from my Nexus One using XDA
Click to expand...
Click to collapse
That's bad, I recommend to hand it in for repairs, since you can't even connect it to a PC nor boot into recovery.
oops! accidentally beamed from my awesome NEXUS S!
I got it going close one! Thanks anyways for giving the time to suggest some advice.
Sent from my Nexus S using XDA
bestofrhcp said:
I got it going close one! Thanks anyways for giving the time to suggest some advice.
Sent from my Nexus S using XDA
Click to expand...
Click to collapse
hey do you mind telling me what you did because the same thing just started to happen on my nexus , thanks in advance
hi.... i need help!!!!
i have the same problem stated above . my phone automatically switches on if the battery is inserted. i cant use the volume keys when in fastboot mode(even the power key doesnt work). any advice ??? i have done remedies to the best of my knowledge though...should this phone be brought to service (center)??? im running on stock ics 404

[Q] Bricked TF101 - any way out?

Hi
So I have totally bricked my TF101, I basically ran the ARHD Super Wipe Full script and then stupidly hit reboot, rather than actually go an install anything.
Now my TF101 is stuck on the Asus boot screen and I can't get out of it. To top it off, my power button is totally messed up and doesn't really work anymore.
When I connect the TF101 to my computer (Win7) it tries to install the Asus MTP drivers (which fail because I get error 10, the device is not working, or something like that).
I can't get the machine into APX mode (or any other mode in that case) and I can't get ADB to work on it.
Have I totally baked the machine?
[FYI I have taken it back to Asus but for them to repair it, they say they have to change the motherboard and the cost would be HK$2,400].
Thanks in advance for any tips / suggestions.
browngeek said:
Hi
So I have totally bricked my TF101, I basically ran the ARHD Super Wipe Full script and then stupidly hit reboot, rather than actually go an install anything.
Now my TF101 is stuck on the Asus boot screen and I can't get out of it. To top it off, my power button is totally messed up and doesn't really work anymore.
When I connect the TF101 to my computer (Win7) it tries to install the Asus MTP drivers (which fail because I get error 10, the device is not working, or something like that).
I can't get the machine into APX mode (or any other mode in that case) and I can't get ADB to work on it.
Have I totally baked the machine?
[FYI I have taken it back to Asus but for them to repair it, they say they have to change the motherboard and the cost would be HK$2,400].
Thanks in advance for any tips / suggestions.
Click to expand...
Click to collapse
So power button doesn't work at all?
If that's the case then I'm afraid your tablet is kinda paperweight..
Try downloading universal naked drivers and install them.. that might help in installing / recognising your tablet... I'm out of suggestions....
You can try this.. let the battery drain out.. press down volume down button and then plug your tablet into power.. as soon as screen boots up hit volume up button that should take you into recovery... once in recovery do the needful.... good luck
Sent from my Transformer TF101 using xda app-developers app
Did you try using compressed air on the buttons? Maybe you just have some pocket lint in there.
As a last ditch effort, you could wait for it to shut down, hold volume down, and then plug it in. If your tf boots, it will respond to the boot time commands.
APX mode might be better since you won't need any button commands once you get in. I think ASUS changes the usb ID every once in a while to keep windows users on their toes. It doesn't seem to be an issue with linux.
"As a last ditch effort, you could wait for it to shut down, hold volume down, and then plug it in. If your tf boots, it will respond to the boot time commands."
If you can do this and get into recovery you'd be closer, what recovery do you have installed? I have twrp and it supports external sd which saved me when i did this. ..
Thanks guys.
I have already tried the universal naked drivers, without luck.
I was using an old Roach recovery.
Will try the other methods. Otherwise I'm going to take it down to one of the computer centres in HK to see if these guys can do anything (and hopefully cheaper than what Asus are asking for).
browngeek said:
Thanks guys.
I have already tried the universal naked drivers, without luck.
I was using an old Roach recovery.
Will try the other methods. Otherwise I'm going to take it down to one of the computer centres in HK to see if these guys can do anything (and hopefully cheaper than what Asus are asking for).
Click to expand...
Click to collapse
Dude before going try pressing volume down option what I said before...
Sent from my Transformer TF101 using xda app-developers app
udupa82 said:
Dude before going try pressing volume down option what I said before...
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Hi, yep, tried your suggestion, however its not getting past the boot screen. It does make a little clicking sound, but won't budge.
browngeek said:
Hi, yep, tried your suggestion, however its not getting past the boot screen. It does make a little clicking sound, but won't budge.
Click to expand...
Click to collapse
I hope u can fix it.. good luck...
Sent from my Transformer TF101 using xda app-developers app
OK, so opened up the Bezel, following this guide:
http://www.transformerforums.com/fo.../10501-rs-guide-power-lock-button-issues.html
Seems my power button is totally fried as even with the bezel open it doesn't work at all.
It should go to boot screen if ur pressing vol - it should boot into recovery I don't thinked the button fried:sly:
Sent from my SPH-D710 using xda app-developers app

Help!! Stuck on boot screen after update

So my brother accepted the 4.2 update on Thursday. He is stock and non-rooted. When he accepted the update, his tablet was in the keyboard dock. He let it be while it updated for about 2 hours. It was still on the boot screen. Then, he detached it from the dock and put it on the charger. It's been just shy of six hours, and it's still on the boot screen. What should we do?
Sent from my GT-N8013 using Tapatalk HD
budzylikessoup said:
So my brother accepted the 4.2 update on Thursday. He is stock and non-rooted. When he accepted the update, his tablet was in the keyboard dock. He let it be while it updated for about 2 hours. It was still on the boot screen. Then, he detached it from the dock and put it on the charger. It's been just shy of six hours, and it's still on the boot screen. What should we do?
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
Did you try to power it off then on again?
No should I? Is there a chance of bricking it?
Sent from my GT-N8013 using Tapatalk HD
budzylikessoup said:
No should I? Is there a chance of bricking it?
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
We don't know what happened. Do you know if the software installed but failed to boot up or it never installed? Obviously it's not doing anything right now, so you have no choice but reboot the device. If it bricked it already done.
I just rebooted, same problem.
Sent from my GT-N8013 using Tapatalk HD
budzylikessoup said:
I just rebooted, same problem.
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
What SKU do you have? US or WW?
US
Sent from my GT-N8013 using Tapatalk HD
budzylikessoup said:
US
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
Did you try to boot to stock recovery and try a "cold boot"?
No, how would I do that??
Sent from my GT-N8013 using Tapatalk HD
budzylikessoup said:
No, how would I do that??
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
Turn off your device, then hold down volume down and power buttons, when you see a white text on the screen release both buttons, now use the Volume down to switch the highlighted RCK to Android icon, then hit the Volume up button twice to execute. This will cold boot your device.
Same problem, still stuck on the boot screen after 3 minutes.
Sent from my GT-N8013 using Tapatalk HD
budzylikessoup said:
Same problem, still stuck on the boot screen after 3 minutes.
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
How many icons did you see? 3 or 4?
After I held down power and vol down, I saw three icons.
Sent from my SCH-I535 using xda app-developers app
budzylikessoup said:
After I held down power and vol down, I saw three icons.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Seems like you're updated to 4.2 but something corrupted prevented it from booting up. Try the same procedures but this time select "wipe data" icon then hit volume up twice to execute it. This is like factory reset.
Thank you, we factory reset it and it was at 4.2.1 working properly.
Sent from my GT-N8013 using Tapatalk HD
budzylikessoup said:
Thank you, we factory reset it and it was at 4.2.1 working properly.
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
Nice! glad it worked for you.
Hey, Im sorry for hijacking this thread.
But I have exactly the same issue. Expect that my Tf700 wont boot, after that wipe...
Its still stuck on the "Asus" Screen.
Before I installed via OTA, I tried to save root with OTA Rootkeeper and changed nothing else. Im stock and my bootloader is locked.
I have also just 3 icons when pressing power and volume down. So I think I have a similar problem you described buhohitr.
If I boot with Volume Down and Power Button pressed there is this text:
Android cardhu-user bootloader <1.00 e> released by "WW_epad-10.6.1.14.4-20130329" A03
Key driver not found.. Booting OS
Starting Fastboot USB Download protocol
Click to expand...
Click to collapse
with the 3 Icons.
I hope somebod can help me. Thank you
Aski1 said:
Hey, Im sorry for hijacking this thread.
But I have exactly the same issue. Expect that my Tf700 wont boot, after that wipe...
Its still stuck on the "Asus" Screen.
Before I installed via OTA, I tried to save root with OTA Rootkeeper and changed nothing else. Im stock and my bootloader is locked.
I have also just 3 icons when pressing power and volume down. So I think I have a similar problem you described buhohitr.
If I boot with Volume Down and Power Button pressed there is this text:
with the 3 Icons.
I hope somebod can help me. Thank you
Click to expand...
Click to collapse
Did you try to boot into recovery then select the "WIPE DATA" icon (by hiting the volume down until it highlighted, then press the volume up button twice. It will wipe data then reboot your device automatically.
buhohitr said:
Did you try to boot into recovery then select the "WIPE DATA" icon (by hiting the volume down until it highlighted, then press the volume up button twice. It will wipe data then reboot your device automatically.
Click to expand...
Click to collapse
I already did that a couple of times and the problem still occurs :/
Aski1 said:
I already did that a couple of times and the problem still occurs :/
Click to expand...
Click to collapse
Since yours is still locked. I think the only to recover your device is wait for Asus to release the full firmware. Sorry!

[Q] Fixing my Bricked Verizon S3

Hello everyone,
I'm in deep trouble with my bricked phone. Yesterday I wanted to flash Cyanogenmod 11 and I was following a video guide on how to do it. The video said to flash TWRP recovery to the phone so that's what I did. I don't believe it said anything about unlocking the bootloader at all. So what happened was I flashed the recovery and the problem said if I wanted to boot into recovery now.
It didn't because a message popped up saying "A program that i not authorized by Verizon was detected on this phone" blah blah blah. And now anytime I tried booting the phone it goes to that message. I can't boot to anything. Yesterday was able to boot into ODIN mode and thought I could flash something or at least wipe my phone completely and start from scratch. Well I went to bed and thought I could pick u from ODIN mode but now my screen won't turn on. When I press the power button, the light nor the screen turns on. Now I have no idea that to do.
Things I've tried:
https://www.youtube.com/watch?v=dU5H8NJ7vTM
I tried this twice, once yesterday with a 2 GB non class 10 SD card and the other today with a 16gb Class 10 SD card that matches my 16gb S3.
Odin doesn't recognize my phone and neither does my computer.
I think my only option is to buy a USB Jig to try to get my phone into download again. Is there anyway I can make a USB jtag jig instead of buying? Would anyone in a Verizon Store be able to help me?
I don not care about the data on my phone at all, all I want to make it work again.
Please help, thanks.
I'll stop by the Verizon Store and see if they can help.
Edit: I wasted my time...
logitechnoob said:
I'll stop by the Verizon Store and see if they can help.
Click to expand...
Click to collapse
They can't, you need to read the guides on how to fix the softbrick and read up on your device limitations. Updated S3's have locked bootloaders.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
They can't, you need to read the guides on how to fix the softbrick and read up on your device limitations. Updated S3's have locked bootloaders.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Okay I'll keep trying. What probably really bricked my phone was when I tried the fix in the video with a small SD card. I didn't watch the first where he mentions it's crucial to use a 16gb class 10 card...
logitechnoob said:
Okay I'll keep trying. What probably really bricked my phone was when I tried the fix in the video with a small SD card. I didn't watch the first where he mentions it's crucial to use a 16gb class 10 card...
Click to expand...
Click to collapse
Your phone isn't hard bricked, it's soft bricked, that guide won't do anything for you. If you were on 4.1.2 you need to use the appropriate file or you'll lock your bootloader.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
Your phone isn't hard bricked, it's soft bricked, that guide won't do anything for you. If you were on 4.1.2 you need to use the appropriate file or you'll lock your bootloader.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1840030
I tried this one but I can't do it because ODIN doesn't see my phone and I can't get into Odin mode
Edit: Well I can't see anything because my screen won't turn on. I turn on the phone with holding down the Power + Home + Vol Down, then keep holding down Home and Vol Down, then Vol Up to get into download mode. When I plug in the cord the phone vibrates as if I turned it on again.
logitechnoob said:
http://forum.xda-developers.com/showthread.php?t=1840030
I tried this one but I can't do it because ODIN doesn't see my phone and I can't get into Odin mode
Click to expand...
Click to collapse
That will work, but you don't have to go through the whole flashing boot chain process, I'd use the newer guide ThePagel wrote with the 4.1.2 tar.
You should be able to get into download mode. Power + home + volume down until the blue small text appears in the corner. Then you can let go.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
That will work, but you don't have to go through the whole flashing boot chain process, I'd use the newer guide ThePagel wrote with the 4.1.2 tar.
You should be able to get into download mode. Power + home + volume down until the blue small text appears in the corner. Then you can let go.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Well I can't see anything because my screen won't turn on. I turn on the phone with holding down the Power + Home + Vol Down, then keep holding down Home and Vol Down, then Vol Up to get into download mode. When I plug in the cord the phone vibrates as if I turned it on again.
logitechnoob said:
Well I can't see anything because my screen won't turn on. I turn on the phone with holding down the Power + Home + Vol Down, then keep holding down Home and Vol Down, then Vol Up to get into download mode. When I plug in the cord the phone vibrates as if I turned it on again.
Click to expand...
Click to collapse
Strange, so you're getting into download mode but once you plug it in the phone reboots?
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
Strange, so you're getting into download mode but once you plug it in the phone reboots?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I can't verify that I'm getting into download because my screen is off the whole time, so I'm doing the button presses blindly. And yes it seems like it is
logitechnoob said:
I can't verify that I'm getting into download because my screen is off the whole time, so I'm doing the button presses blindly. And yes it seems like it is
Click to expand...
Click to collapse
I think your power button is broken or the display is broken. It doesn't make sense for it to be hard bricked.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
I think your power button is broken or the display is broken. It doesn't make sense for it to be hard bricked.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
That's what the person said at the Verizon store but I don't believe it at all. The screen was perfectly fine Friday night. I didn't drop my phone at all so that the hardware could have been physically damaged.
logitechnoob said:
That's what the person said at the Verizon store but I don't believe it at all. The screen was perfectly fine Friday night. I didn't drop my phone at all so that the hardware could have been physically damaged.
Click to expand...
Click to collapse
You don't need to drop it for it to be broken, they've been known to stick. Lookup YouTube videos on how to unstick the power button.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
You don't need to drop it for it to be broken, they've been known to stick. Lookup YouTube videos on how to unstick the power button.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Okay so I had the phone unplugged and without the battery overnight. I put in the battery and turn it on, phone vibrates and that's it. However, when I plug it in to be charged, now the red LED light doesn't come on and the phone vibrates repeatedly like it's in a boot loop.
How can I tell if my power button it stuck? I can feel the button depress like it should.
logitechnoob said:
Okay so I had the phone unplugged and without the battery overnight. I put in the battery and turn it on, phone vibrates and that's it. However, when I plug it in to be charged, now the red LED light doesn't come on and the phone vibrates repeatedly like it's in a boot loop.
How can I tell if my power button it stuck? I can feel the button depress like it should.
Click to expand...
Click to collapse
There's no way to easily tell, it sounds like it is though. Try to fix it and see if it fixes your phone.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
There's no way to easily tell, it sounds like it is though. Try to fix it and see if it fixes your phone.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
WOAHHHHHHH phone screen is working again for no reason!!! I can get into ODIN mode!! I'm doing this fix right now!
http://forum.xda-developers.com/showthread.php?t=1840030
Phone is de-bricked! Runnign stock Android 4.0.4 right now. I'm going to properly install Cyanogenmod now lol
Thanks for all your help!

OnePlus 3 stucked at boot logo

My oneplus 3 is stucked at boot logo.. I cant choose any option in recovery mode because my power button is broken.. Is there any way to boot the phone?
Akshay1310 said:
My oneplus 3 is stucked at boot logo.. I cant choose any option in recovery mode because my power button is broken.. Is there any way to boot the phone?
Click to expand...
Click to collapse
Try adb.
adb reboot
Also, there are mods that allow using the volume button as the power button.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Try adb.
adb reboot
Also, there are mods that allow using the volume button as the power button.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
How can I do adb reboot? I dnt know anything about phone.. Please help me
Akshay1310 said:
How can I do adb reboot? I dnt know anything about phone.. Please help me
Click to expand...
Click to collapse
Send your device to a repair shop then, if you do not have experience, you will probably not be able to fix this, you will probably damage your device worse than what it is already damaged.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Send your device to a repair shop then, if you do not have experience, you will probably not be able to fix this, you will probably damage your device worse than what it is already damaged.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
My brother booted up the phone.. We had to bend the frame near the sim card tray to get the power button work.. I just need one help.. How to add custom buttons in recovery mode?
Akshay1310 said:
My brother booted up the phone.. We had to bend the frame near the sim card tray to get the power button work.. I just need one help.. How to add custom buttons in recovery mode?
Click to expand...
Click to collapse
Nvm I got it.. Thanks
Akshay1310 said:
Nvm I got it.. Thanks
Click to expand...
Click to collapse
One last question
My phone is rooted .. What if my phone is 0% how can I boot it up again?
Akshay1310 said:
My brother booted up the phone.. We had to bend the frame near the sim card tray to get the power button work.. I just need one help.. How to add custom buttons in recovery mode?
Click to expand...
Click to collapse
Is the bootloader unlocked on the device?
If not, you won't be able to change button mapping/function in recovery.
If it is, you can try building a new copy of recovery but change the keymapping/button function in the coding of the recovery before you compile the new copy.
To be honest, you won't be able to solve this with a software fix, you will have to repair the power button if you want to be able to make selections in recovery, whether you "want" to or whether you can afford it or not.
Another option is to use a USB keyboard or a USB mouse to make selections, android supports keyboard and mouse via USB.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Is the bootloader unlocked on the device?
If not, you won't be able to change button mapping/function in recovery.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
Yes, its unlocked
Akshay1310 said:
Yes, its unlocked
Click to expand...
Click to collapse
I added more information to my post above.
Sent from my SM-S767VL using Tapatalk

Categories

Resources