Hi all,
Yesterday I was flashing a theme for the Vemon ROM on the M8. I ended up deciding I didn't like it, so I tried to go back and flash a backup I had made. However, once I flashed the backup, the device wouldn't boot up past the HTC One white screen (it will go past the HTC logo by itself, but then the One appears on the screen and stops there). I have no idea why, as I have made backups before and have had no issues. On the default backup name, it does say KOH Release keys. I don't know if that means anything. I was able to get to recovery and flash the base Venom ROM, but I'd like to know why my backups are not playing nice.
Any and all help regarding this would be appreciated.
Did you try wiping everything before restoring your backup?
Sent from my HTC6525LVW using Tapatalk
I had the same, exact issue. Absolutely no reason why it shouldn't have worked. I made sure the Nandroid copied the necessary partitions/directories and also performed a full wipe before restoring the backup. Same issue. I was on TWRP and I'm pretty sure there is some issue with TWRP.
I haven't attempted to make a backup or restore a Nandroid since, so I don't know whether its still an issue.
ChuckFinley1992 said:
Hi all,
Yesterday I was flashing a theme for the Vemon ROM on the M8. I ended up deciding I didn't like it, so I tried to go back and flash a backup I had made. However, once I flashed the backup, the device wouldn't boot up past the HTC One white screen (it will go past the HTC logo by itself, but then the One appears on the screen and stops there). I have no idea why, as I have made backups before and have had no issues. On the default backup name, it does say KOH Release keys. I don't know if that means anything. I was able to get to recovery and flash the base Venom ROM, but I'd like to know why my backups are not playing nice.
Any and all help regarding this would be appreciated.
Click to expand...
Click to collapse
I tried wiping everything yes. I did a factory reset data wipe first, and then tried installing the backup. I don't know why it did not work. I was eventually able to get out of the boot screen with an volume up and power key combination, but it was more frustrating not knowing why this issue was happening. If anyone knows why this is occurring, I would gladly like to know.
Related
Hey guys, so I'm worried I might have bricked my One S, or at least messed it up beyond what I can personally repair.
Basically what happened was that I was trying to install the Auto brightness patch (http://forum.xda-developers.com/showthread.php?t=1638559) onto my One S, because I wasn't happy with the batterly life. Stupidly, I tried to install it without checking accurately for matching RUU version numbers. I thought the Virtuous Ville v1.40 ROM I was running had a 1.78 base, but it has a 1.70 one. Still, I figured that in case anything went wrong, I would just make a nandroid backup and restore. Unfortunately this did not work out so well.
My phone got stuck in a boot loop, so I reset it. When I tried to restore my Nandroid backup, I got an error saying "can't mount /sdcard" or something of the sort. Other Nandroid backups had always worked.
I think before entering recovery, I selected "factory reset" on the HBOOT menu instead of "recovery" by accident. It still loaded into the recovery though, so I wasn't sure what I had actually done. If I did press the wrong thing don't know if that somehow messed up the recovery's access to the SD card.
So now I don't know what to do. I don't mind having to reinstall everything and losing my data, I just want my phone to work. Everytime I try to turn it on it gets stuck in a boot loop, and there doesn't seem to be any way I can access my storage for either nandroid nor installing any roms.
Any help would be immensely appreciated.
Sorry guys, false alarm.
For anyone that's curious, all I had to do to fix my problem was simply reflash CWM recovery(interim touch). Not sure what went wrong, but I think that was that fixed it. Unfortunately I lost all my data and customizations(not sure ifbecause of the factory reset in HBOOT or because I also accidentally clicked on "clear storage" >_>) but since i just got the phone a few days ago and have been installing ROMs very frequently, it's no biggie.
Can a mod close this?
napilopez said:
Sorry guys, false alarm.
For anyone that's curious, all I had to do to fix my problem was simply reflash CWM recovery(interim touch). Not sure what went wrong, but I think that was that fixed it. Unfortunately I lost all my data and customizations(not sure ifbecause of the factory reset in HBOOT or because I also accidentally clicked on "clear storage" >_>) but since i just got the phone a few days ago and have been installing ROMs very frequently, it's no biggie.
Can a mod close this?
Click to expand...
Click to collapse
You shouldn't be using the interim release of the touch recovery anymore.
There is an official release now: Official Touch Recovery
And yes, you lost everything because you did a factory reset... it's all in the name you know... 'factory reset' - does it ring any bells?
I'm having the same problem here. I've tried to fastboot flash alternate recoveries and keep getting the sdcard error. I was trying to install cm9 and now phone won't boot and no sdcard!
Any help would be GREATLY appreciated........
Try this: http://forum.xda-developers.com/showthread.php?t=1630459
Sent from my HTC One S using Tapatalk 2
I followed the instructions exactly on this page: http://forum.xda-developers.com/showthread.php?t=1663169
CM9 seemed to work fine for a while. I installed Titanium Backup and brought back my apps and just a bit of system data (contacts, voicemail, texts, etc). After I had restored those things, it said it suggested a reboot. I did that, but now it just reboots over and over. I can't get in to the OS for more than a few seconds before it reboots again. Help please!
As that thread specifies, I have a MX2 from CSpire. For now I don't care so much about getting CM9 working as just getting my phone back to a working state. I have both a nandroid and titanium backup on the sd card. I just need very specific instructions on how to get back to the way it was (2.3.6) given that I can't get in to the OS.
Edit: Pulling the battery doesn't resolve anything
Does it let you stay in long enough to remove the app/settings you restored? Are you able to get into recovery mode at all?
If you can get into recovery you might first want to try Fix Permissions and see how that works. If this does not solve it then consider doing a factory wipe and start restoring your apps/settings again one by one and rebooting in between until you get to the particular one that started your reboot problem.
What ROM were you on prior to CM9? Although they should be largely universal sometimes there are some slight changes in custom ROMs that might work well in many other ROMs but not in a select few. Other times it is an app that is not compatible.
The post below might be of some help since your phone seems to have a different method of getting into recovery than what I have dealt with so far.
http://forum.xda-developers.com/member.php?u=4395758
Factory Restore DX2
This might help. It's a factory restore, like you just bought it. http://forum.xda-developers.com/showthread.php?t=1317707
After much sweat, tears, and button pressing, I have gotten it back to stock CM9 and it seems to be behaving as expected. I am going to install apps one by one and reboot between every install. Hopefully I'll find the culprit soon enough.
Hi
Was running CM10 nightly from 12 Dec. Bluetooth froze while in car. I rebooted phone. It never came back up after booting, just looping Cyanogenmod logo.
Went into recovery, did a Nandroid, restored my previous backup from the 11th. Still looping Cyanogenmod logo.
Got home. Reflashed stock kernel. Went into recovery and flashed CM10 stable after wiping. Comes up with HTC logo, then black.
Tried to go back into recovery. Comes up with HTC logo, then goes black.
Now it lets me into fastboot, and into the bootloader menu, but recovery does not work. Neither does booting normally. Tried reflashing kernel AND recovery (stable TWRP). It just keeps looping the HTC logo.
HBOOT is 1.14.
Help, please. I'm going to destroy this piece of ****.
If all else fails, run a RUU and skip the thread.
yea, just ruu. i ruu'd a few days ago for kicks.
some car chargers and even wall chargers can make ur phone go wonky, my old moto backflip would randomly press buttons if i used a non-motorola charger.
on a side note, i never used the word "wonky" until this forum.
try running "fastboot erase cache"
also try a clean install instead of restoring nandroid, im assuming your also fastbooting the boot.img from all your nandroid backups. if not they probably wont boot.
strange...
I would say ruu and retry as well.. Sometimes accessories can make a phone go haywire.. Besides the phone is not a piece of crap.Roms can never give you complete stability while stock unrooted can.
Yep. Thanks. Had to start from scratch with Sense again. Now on CM10 stable (and stable CM10 kernel). Hopefully it doesn't lose its mind again, I'm going overseas soon. Sigh.
For anyone who has a similar catastrophe - Titanium recovered most (but not all) of my apps from my TWRP backup. I guess my data partition was slightly corrupt. AppExtractor restored my SMS database from the backup too.
I hate phones.
Passa91 said:
Yep. Thanks. Had to start from scratch with Sense again. Now on CM10 stable (and stable CM10 kernel). Hopefully it doesn't lose its mind again, I'm going overseas soon. Sigh.
For anyone who has a similar catastrophe - Titanium recovered most (but not all) of my apps from my TWRP backup. I guess my data partition was slightly corrupt. AppExtractor restored my SMS database from the backup too.
I hate phones.
Click to expand...
Click to collapse
I always export my contact list to /sdcard if a change is made and then backup to google just in case
Passa91 said:
Yep. Thanks. Had to start from scratch with Sense again. Now on CM10 stable (and stable CM10 kernel). Hopefully it doesn't lose its mind again, I'm going overseas soon. Sigh.
For anyone who has a similar catastrophe - Titanium recovered most (but not all) of my apps from my TWRP backup. I guess my data partition was slightly corrupt. AppExtractor restored my SMS database from the backup too.
I hate phones.
Click to expand...
Click to collapse
I'd suggest keeping a boot.IMG and a stock ROM on the SD card along with adb drivers so you can fix it with a computer without downloading anything.
Sent from my Nexus 4 using xda premium
I've looked around quite a bit, but can't find anyone who has had this problem when restoring. I was trying out Paranoid Android 3.10 D2VZW on my Galaxy SIII, and decided to go back to JellyBam 8.2.0 D2VZW. Both are 4.2.2 ROMs. I rebooted into CWM Recovery, wiped data and cache (can't remember if I wiped the Dalvik), and restored my JellyBam backup. The restore went fine, and I rebooted the system from CWM...nothing! Phone is completely black, no boot up at all. I tried the power button, a battery pull, booting into recovery, and booting into download. When I plug my phone into my computer (a Mac with Windows running in Parallels), I get QHSUSB_DLOAD. So far my research tells me this means my phone is hard-bricked. If I plug in without a battery, I get a red LED light that extinguishes after a few minutes. My understanding of hard-bricking is that it's caused by flashing ROMs not intended for my phone (i.e. an international version ROM). Why would my phone hard-brick if the last thing I did is restore a backup from a previously-working ROM built for my phone? I didn't check the md5, but if the md5 failed wouldn't the restore fail too? I literally can't do anything with my phone. No display, no Odin/download, no recovery. The only indications that it isn't completely fried are the red LED and my computer recognizing the QHSUSB_DLOAD and making a notification sound when it's connected or disconnected. I have no problem sending it to be JTAGed if need be, but I'm not 100% that it's hard-bricked. Any suggestions?
ransdell2 said:
I've looked around quite a bit, but can't find anyone who has had this problem when restoring. I was trying out Paranoid Android 3.10 D2VZW on my Galaxy SIII, and decided to go back to JellyBam 8.2.0 D2VZW. Both are 4.2.2 ROMs. I rebooted into CWM Recovery, wiped data and cache (can't remember if I wiped the Dalvik), and restored my JellyBam backup. The restore went fine, and I rebooted the system from CWM...nothing! Phone is completely black, no boot up at all. I tried the power button, a battery pull, booting into recovery, and booting into download. When I plug my phone into my computer (a Mac with Windows running in Parallels), I get QHSUSB_DLOAD. So far my research tells me this means my phone is hard-bricked. If I plug in without a battery, I get a red LED light that extinguishes after a few minutes. My understanding of hard-bricking is that it's caused by flashing ROMs not intended for my phone (i.e. an international version ROM). Why would my phone hard-brick if the last thing I did is restore a backup from a previously-working ROM built for my phone? I didn't check the md5, but if the md5 failed wouldn't the restore fail too? I literally can't do anything with my phone. No display, no Odin/download, no recovery. The only indications that it isn't completely fried are the red LED and my computer recognizing the QHSUSB_DLOAD and making a notification sound when it's connected or disconnected. I have no problem sending it to be JTAGed if need be, but I'm not 100% that it's hard-bricked. Any suggestions?
Click to expand...
Click to collapse
It's definitely hard bricked, whatever happened is very strange though, as a nandroid doesn't usually mess up your boot partition.
Flashing a rom not intended for your phone can cause a hard brick, but that's not the only way it can happen. Somewhere in the restore process your boot partition got corrupted. Your base coding somehow is not being recognized, and your computer and phone can't tell what's supposed to run. A jtag is really your only option.
TWRP offers you the option to disable the boot and recovery partition when restoring. After you fix your phone, I'd recommend trying that out so you're absolutely sure your boot partition doesn't get touched. Those really don't need to be restored anyway.
Sorry that happened to you.
Sent from my SCH-I535 using Tapatalk 2
Bummer. Thanks for the input. I kinda figured that was the case, but was hoping I was missing something. Guess I'm going to have it JTAGed, probably by Mobile Tech Videos. The process looks fairly simple. If the equipment costs were comparable to having someone else do it I might do it myself, but if that were the case everyone else would be doing that too! I'll let you know how it goes.
ransdell2 said:
Bummer. Thanks for the input. I kinda figured that was the case, but was hoping I was missing something. Guess I'm going to have it JTAGed, probably by Mobile Tech Videos. The process looks fairly simple. If the equipment costs were comparable to having someone else do it I might do it myself, but if that were the case everyone else would be doing that too! I'll let you know how it goes.
Click to expand...
Click to collapse
I think the price is reasonable if you factor in equipment and labor.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
I think the price is reasonable if you factor in equipment and labor.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Got my phone JTAGed by Patrick Walls (whose service is available on eBay for ~$35), and it works great. Fast service and great communication from Patrick. The phone came back unrooted with a stock 4.1.2 ROM. Of course I immediately re-rooted it and flashed a fresh JellyBAM ROM to it (with a huge feeling of trepidation), and so far everything is working, with the exception of the camera (I get "Can't connect to camera" after taking one picture, and a reboot is the only thing that enables the camera again, for one pictures, then can't connect, reboot, one pic, can't connect, etc.).
Having never hard-bricked before after many, many ROM changes on a Fascinate and about 10 ROM changes on my S3, I'm a little nervous about changing them now. Is my hesitation unfounded providing I don't mess with the bootchain? To root my phone I flashed the VRALEC bootchain, then TWRP, then rooted, then JellyBAM, then the VRBMD3 bootchain, as per this rooting guide:
http://forum.xda-developers.com/showthread.php?t=2046439
Now that I've put my phone back to the Jelly Bean bootchain, I should be free to flash ROMs built for my device without a serious concern about hard-bricking, right?
ransdell2 said:
Got my phone JTAGed by Patrick Walls (whose service is available on eBay for ~$35), and it works great. Fast service and great communication from Patrick. The phone came back unrooted with a stock 4.1.2 ROM. Of course I immediately re-rooted it and flashed a fresh JellyBAM ROM to it (with a huge feeling of trepidation), and so far everything is working, with the exception of the camera (I get "Can't connect to camera" after taking one picture, and a reboot is the only thing that enables the camera again, for one pictures, then can't connect, reboot, one pic, can't connect, etc.).
Having never hard-bricked before after many, many ROM changes on a Fascinate and about 10 ROM changes on my S3, I'm a little nervous about changing them now. Is my hesitation unfounded providing I don't mess with the bootchain? To root my phone I flashed the VRALEC bootchain, then TWRP, then rooted, then JellyBAM, then the VRBMD3 bootchain, as per this rooting guide:
http://forum.xda-developers.com/showthread.php?t=2046439
Now that I've put my phone back to the Jelly Bean bootchain, I should be free to flash ROMs built for my device without a serious concern about hard-bricking, right?
Click to expand...
Click to collapse
Glad you got it working.
There's always a risk of something going wrong and a hard brick reoccurring, you just had bad luck. I don't think your brick had anything to do with your bootchain.
I think what probably happened was when you made a nandroid in cwm, the boot partition somehow got corrupted. CWM by default restores your boot, recovery, data, system, and cache partitions. In the advanced restore section, you can restore one at a time but you have no way of simply disabling a particular partition from being restored. I think since the boot partition was messed up, it erased your good data and hard-bricked your phone.
TWRP by default only backs up your data, cache, and system partitions and leaves your boot and recovery partitions alone. If you restore that backup, then there's pretty much no way a hard brick can happen. I can't think of any reason why you really need to backup your recovery or boot partition.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Glad you got it working.
There's always a risk of something going wrong and a hard brick reoccurring, you just had bad luck. I don't think your brick had anything to do with your bootchain.
I think what probably happened was when you made a nandroid in cwm, the boot partition somehow got corrupted. CWM by default restores your boot, recovery, data, system, and cache partitions. In the advanced restore section, you can restore one at a time but you have no way of simply disabling a particular partition from being restored. I think since the boot partition was messed up, it erased your good data and hard-bricked your phone.
TWRP by default only backs up your data, cache, and system partitions and leaves your boot and recovery partitions alone. If you restore that backup, then there's pretty much no way a hard brick can happen. I can't think of any reason why you really need to backup your recovery or boot partition.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Great, thanks for the info! I'll make sure that the boot and recovery partitions aren't touched in the future. I've primarily used CWM, but am probably just going to stick with TWRP.
I was mucking around with Titanium Backup and froze (*not uninstalled) Blinkfeed. Unfortunately, this caused my phone to crash. Now it will not boot. I am able to get it into CWM recovery, but I never made a .zip to recover from and now I just feel stupid. Is there any way to recover this?
Am I able to do a factory reset in order to get the phone working again? (And also, will this remove my root) The data I'm not terribly concerned about. All important pictures have been backed up already and there are no documents that are dire. I just need a working phone.
Thank you for any help you can provide!
I would just put a rom zip onto a microSD and flash that.
Although I wouldn't have thought that freezing BlinkFeed would crash your phone and get it stuck in a bootloop, so what do I know?
Performed a factory reset and that doesn't seem to have fixed the problem.
I'm going to look into flashing a rom but that is something I haven't done before and I'm not too comfortable with it.
Do you have any suggestions? I just want to keep the standard stuff (what it was shipped with). I was mainly rooting to get rid of bloatware and have a bit more freedom.
EDIT: Rebooted a second time and the factory reset seems to have taken hold. I'm back at square one but it is far better than nothing.
EDIT2: Not quite back at square one as my backup through Titanium Backup still existed and I was able to utilize that. Lost some contacts, call history, and texts. That's all!
Glad to hear that you were able to fix it. If you ever need a stock Sense rom, I would recommend CleanRom. Watch out though, its really easy to become a flashaholic
i did the same thing : )
Dwight Caffery said:
Glad to hear that you were able to fix it. If you ever need a stock Sense rom, I would recommend CleanRom. Watch out though, its really easy to become a flashaholic
Click to expand...
Click to collapse
, but i actually did delete blinkfeed on the m8 verizon using titanium. screen went black. i can get into recovery mode, but no backup made yet because i havent decided on which rom i like best. i did a factory reset with no change after reboot. can i install a rom on my sd then use it to reboot my phone? please help. thanks in advance
S.Hash said:
, but i actually did delete blinkfeed on the m8 verizon using titanium. screen went black. i can get into recovery mode, but no backup made yet because i havent decided on which rom i like best. i did a factory reset with no change after reboot. can i install a rom on my sd then use it to reboot my phone? please help. thanks in advance
Click to expand...
Click to collapse
Or run the stock s-on ruu which doesn't wipe.