I have moved in the passed week and our cell signal is not as good at the new house. I normally don't connect to wifi unless I'm at church since I have an unlimited data plan. Is there a good app that will turn my wifi on when I am at my house and at church so I don't have to think about it?
Trilback said:
I have moved in the passed week and our cell signal is not as good at the new house. I normally don't connect to wifi unless I'm at church since I have an unlimited data plan. Is there a good app that will turn my wifi on when I am at my house and at church so I don't have to think about it?
Click to expand...
Click to collapse
tasker can do that, also there is another app, i dont know the name offhand i can find it iif tasker isnt for you.
Wifi manager can do that without problem => WiFi Manager apk
• Switch among your favorite networks with a single tap by using the WiFi Network Switcher widget. It will even enable WiFi if needed.
• Automatic switching between fixed and dynamic (DHCP) IP addresses
Related
Pretty self explanatory this one - is there any way of knowing whether your mobile internet connection (3G) or WiFi is being used in, for example, a browser session? Just don't want to make the mistake of looking at YouTube on the phone, meaning to use the home WiFi, and end up using my 3G by accident, and paying through the nose for extra feed.
ryanbryan said:
Pretty self explanatory this one - is there any way of knowing whether your mobile internet connection (3G) or WiFi is being used in, for example, a browser session? Just don't want to make the mistake of looking at YouTube on the phone, meaning to use the home WiFi, and end up using my 3G by accident, and paying through the nose for extra feed.
Click to expand...
Click to collapse
The icons on your task bar should indicate if you have a active data connection.
Or, you can use Spb Wireless Monitor (which you need to purchase). It produces reports telling you which software uses which connections and the amount of data transferred.
In a discussion I had with HTC Tech Support, they told me that wifi, when enabled, over-rides the cellular data. I'm not sure if this just applies to the settings or always. Hopefully, someone can provide a definitive answer.
Yes that is correct, if WIFI is enabled you WILL NOT have a cellular data connection.
Umm. There is a wifi icon in the taskbar o.o and a signal icon also.....whichever is there means it's active and if wifi is there, your data will not be active, only wifi.
What all you are saying is true but some applications still use the data network even if wifi is turned on and connected it seems. I have the same issue(i don't have a data plan with my fuze since my college has wifi everywhere). But things like weather and other native apps on the phone will just turn on the 3g network and stat using data instead of wifi.
if a device is transfering data over gprs/3g whatever
it show arrows moving in the signal str icon
otherwise it use wifi
Applications can choose to use a certain connection if they are programmed to do so, windows only gives each one a type of 'ranking', the fastest connection having the highest ranking and being the one an application is to use by default, but the application can override this and choose whatever connection it likes. This ranking is called the "Interface Metric" if you'd like to learn more about it.
There's an HTC program called 'bytecounter' that monitors the SMDx: ports in the system, which are the ports the system uses for data.. in bytecounter you will see the values increase if an application is using data over cellular network. let me know if you'd like me to upload it.
Umm. There is a wifi icon in the taskbar o.o and a signal icon also.....whichever is there means it's active and if wifi is there, your data will not be active, only wifi.
Click to expand...
Click to collapse
Well that wasn't particularly helpful. I too have made the same assumption, but the question asked if there was any way to make sure.
windows only gives each one a type of 'ranking', the fastest connection having the highest ranking and being the one an application is to use by default, but the application can override this and choose whatever connection it likes
Click to expand...
Click to collapse
Well that was the kind of answer I was looking for, and is particularly pertinent in my case, as my connection through my mobile provider is about as fast (or maybe even faster) than my fixed line connection at home. A rather bizarre situation, but such is the advancement of Australian broadband infrastructure.
The last couple of times I have used it, I have taken to turning off the phone connection so that only WiFi is running, and then using the internet. It would be good if you can upload the byetcounter program, seems like a free (?) version of the software programatix mentioned.
Here ya go!
Maybe this is just me, but when I try to unzip that file, nothing comes up....?
lol, i always forget to remove the hidden attribute.. let me go ahead and fix that..
Edit: fixed
Newer Windows Live (including the one that come with Touch Pro) will always dial-up the 3G/GPRS connection when checking for email in Messaging. But if you are checking in Windows Live, most of the time it doesn't dial-up but sometimes, it does.
So far that is the only program that I know of behaves like this. I contacted Microsoft regarding this and they keep asking me to contact my celular provider for help. In other word, they are not helping (or do not understand the problem).
Anyway I solved the problem by changing the Connections setting to "My Work Network" for Internet. The catch is, if I really want to use 3G/GPRS, I'll have to change the setting to my celular 3G/GPRS connection.
Or you could use the nodata application from modaco and disable whenever you like the cellular 3g connection just to be sure you are using wifi.When you are away from wifi networks you can in a matter of 2 clicks reenable the cellular 3g connection...
So I've had this HTC S743 for about 5 days and I thought I had it setup correctly to use wifi for data comm.
wifi enabled and selected to use my home network. I can see the radio tower status icon and my locally named network is also displayed.
Under the comm manager the data connection is off.
I have a very simple $45/mo plan with no monthly data plan.
Over the last 5 days I have been surfing the web a bit did some email tests with my ISP and used the on board GPS app which is horrible. Not heavy usage but experimentation to see if I like how the phone works.
After 2 days I get an email from AT&T that I have extremely high data usage exceeding my account limit (for having no monthly plan) and that I should sign up for a data plan at once.
$29 over 2 days for this little bit of fluff? A total of 2,900kb in data.
So I call up AT&T and they tell me this and that and want me to sign up for a plan which I may do. But I want to be able to know that the datacomm is happening via WIFI when I can see a selected WIFI is in service.
They also told me that all GPS data is forced through 3G and bypasses WIFI???
Can anyone here give me an idea about what I may be doing wrong and whether AT&T is correct about the GPS service?
Is there a better GPS app that doesn't do this? This one pretty much stinks anyway. A resolution of 1000 meters doesn't cut it.
AT&T also informed me that I can't have a smart phone without a data contract. Really? I've had one for 6 years like that but it wasn't WIFI capabale and too small to bother with web access.
Thanks for any light you shed on the subject.
One thing I have subsequently found out is that if data connection is off and WIFI is off then when I go into IE and start surfing it does bring up pages. Then when I go back to the Comm Manager the Data Connection to check the status of my connections it is still off for an instant and then it automatically turns itself on as though it had been turned on by use of IE and the status was just being updated.
Last night I installed a newer version of Google maps and was only able to install it via the web browser as opposed to via the Activesynch application on my PC. I was concerned that this might trigger turning on the 3G connection. So I had it set up for a WIFI connection ONLY and installed the app. Afterwards I went into the connection manager and once again the data conn. was turned back on so it's possible that it utilized AT&T's 3G network instead.
Is there any way to control or stop this?
GPS data doesn't have anything to do with 3G/Wifi data......
I know it's supposed to be positioning via the satellites through the GPS antenna but the the description data is coming over the network right? So it appears that even though I'm setup for WIFI access and it's showing as connected with an IP address etc. when I try the Googlemaps GPS app it turns the data conn. for 3G back on.
Thanks for chiming in ...
I have been copying over and installing some new apps to try out this morning via usb. WIFI is on and I'm loged in. None are datacomm oriented that I know of (unless they'r trying to make an internet access to notify about being installed) none the less I just checked again and my data conn. is once again turned back on. Is this typical behavior for a windows mobile phone (6.1) or is this just an AT&T "feature".
Sorry, I don't have a WM6 phone!
This may be a dumb question but is there a way to set up wifi and data to automatically toggle? As in, when wifi is available it uses wifi, but when its not it automatically switches to 3g/4g? When im home i like to use wifi, but then when I leave I lose it and usually forget to switch over to data, so I get no emails or updates on anything until I look at my phone.
Option 1: Leave wifi and data on all the time.
When a trusted wifi network is available and your phone is connected, your phone will not use data (you will see the data indicator automatically disappear even though it is enabled). When you are no longer connected to wifi, your phone will automatically bring the data connection back.
Exception: using apps (usually Verizon-specific) that require a mobile data connection will bring the 3g/4g radio out of dormancy.
Pro: automatic switching, no need for additional apps.
Con: leaving wifi on takes its toll on battery life.
Option 2: Download/Install Llama from the Market
After you teach the program what cell towers are where, you can define criterion (ie you physically leave or enter a defined area, a certain time, etc) to carry out specific actions, including changing volume, display brightness, toggling data connection, wifi connection, bluetooth, gps, etc.
Pro: automatic switching of most anything imaginable, saves battery life compared to leaving wifi on
Con: additional app running in background, occasional instances of bugs
cnoevl21 said:
This may be a dumb question but is there a way to set up wifi and data to automatically toggle? As in, when wifi is available it uses wifi, but when its not it automatically switches to 3g/4g? When im home i like to use wifi, but then when I leave I lose it and usually forget to switch over to data, so I get no emails or updates on anything until I look at my phone.
Click to expand...
Click to collapse
wi-fi matic is the app you want, it auto toggles wifi on when you are on the same cell tower than is near your home, as soon as your cellular switches to your home cell towers it toggles wifi on, and when it's away from home cell towers it toggles wifi off, you can use it for multiple wifi networks as well, i travel for work so i dont have a work wifi but u could have it auto toggle on at work or home, its also extremely easy to use, far easier than any tasker program.
I am trying to find a free toggle widget to do one simple thing - enable or disable the WiFi Calling feature on my T-Mobile HTC One M7.
Why? I've been having shoddy internet connection issues at home for the last year. Spikes, timeouts, and packet loss before it even gets TO the routing server. How this affects my phone is obvious when you also consider I can barely get 2 bars of 2G signal while inside my home. The best way around this is to turn WiFi Calling on and set it to "WiFi Only" mode so it doesn't try to turn the cell radio back on while the connection is unstable (never more than 3-4 seconds). Just means I have a few seconds here and there where it may drop a call or delay a text or something, which is a small price to pay if you ask me.
However, I can't do WiFi calling outside of the house, which means going in and disabling it every time I want to go somewhere. After a couple months of this (because WiFi calling doesn't disable when WiFi is off for some reason...), I'm trying to find an easier solution. Losing 20% of my battery overnight from having it swapping back and forth is a pain, so I'm not going to set it to "WiFi Preferred", which started all of this.
I tried the application at this thread but it only seems to want to work with Tasker, which is a paid app and currently not a financial option for me (that same $3 is two days' worth of food).
Maybe you need to look into "Mobile Data Toggle" widgets? Accompanied with wi-fi toggle widget, you can set Mobile data to Off, and wi-fi - On when you're at home, and vice-versa when you're away.
NerdgrlApps said:
Maybe you need to look into "Mobile Data Toggle" widgets? Accompanied with wi-fi toggle widget, you can set Mobile data to Off, and wi-fi - On when you're at home, and vice-versa when you're away.
Click to expand...
Click to collapse
Mobile Data is always off 'cause I have a minimal 50MB plan. I have a WiFi toggle on my power bar (wifi, bluetooth, gps, brightness, etc). I need a WiFi CALLING toggle.
Hi.
I get wifi calling working fine on my phone, but it just disappears and stops working after a few hours. Rebooting makes it work again.
Anyone else have this problem?
trainfire said:
Hi.
I get wifi calling working fine on my phone, but it just disappears and stops working after a few hours. Rebooting makes it work again.
Anyone else have this problem?
Click to expand...
Click to collapse
Are you sure it's failing and what do you mean 'stops working'?
Do you try to place a call and it fails because WiFi calling is broken?
Or are you just watching the carrier name change off of WiFi calling? Because your phone will move off of WiFi calling if the signal strength is low enough and the strength of the cellular signal is higher.
The preference switch just dictates which to favor first over the other, it doesn't lock you to WiFi calling only.
Try walking closer to an access point and checking if WiFi calling comes back, that's what it does for me I move from outside with a weak WiFi signal to inside with a strong signal.
If that's the case then you'll need more access points in your house.
Namelesswonder said:
Are you sure it's failing and what do you mean 'stops working'?
Do you try to place a call and it fails because WiFi calling is broken?
Or are you just watching the carrier name change off of WiFi calling? Because your phone will move off of WiFi calling if the signal strength is low enough and the strength of the cellular signal is higher.
The preference switch just dictates which to favor first over the other, it doesn't lock you to WiFi calling only.
Try walking closer to an access point and checking if WiFi calling comes back, that's what it does for me I move from outside with a weak WiFi signal to inside with a strong signal.
If that's the case then you'll need more access points in your house.
Click to expand...
Click to collapse
Where I am right now there is no cellular (offshore). I can also recreate the problem if I turn flight mode on and off. After I do that I can't do wifi call (the icon/text is gone and calls and texts are not working anymore). Kinda weird behavior tbh. It might be the wifi, but it was stable on my last phone. I can wait till I get home and try that wifi, but it's only here at work I need it
trainfire said:
Where I am right now there is no cellular (offshore). I can also recreate the problem if I turn flight mode on and off. After I do that I can't do wifi call (the icon/text is gone and calls and texts are not working anymore). Kinda weird behavior tbh. It might be the wifi, but it was stable on my last phone. I can wait till I get home and try that wifi, but it's only here at work I need it
Click to expand...
Click to collapse
Try disabling MAC address randomization for the access point you are on, it defaults to enabled. It can cause issues if the DHCP lease time is low and your phone gets on and off the network, making it show up as a new device each time.
If it still is having issues then it might just be the network, a grocery store near me has filters and when you get on their guest WiFi you can place a call for a couple seconds before it kills the connection.
Namelesswonder said:
Try disabling MAC address randomization for the access point you are on, it defaults to enabled. It can cause issues if the DHCP lease time is low and your phone gets on and off the network, making it show up as a new device each time.
If it still is having issues then it might just be the network, a grocery store near me has filters and when you get on their guest WiFi you can place a call for a couple seconds before it kills the connection.
Click to expand...
Click to collapse
I'll give that a go. Thanks
Namelesswonder said:
Try disabling MAC address randomization for the access point you are on, it defaults to enabled. It can cause issues if the DHCP lease time is low and your phone gets on and off the network, making it show up as a new device each time.
If it still is having issues then it might just be the network, a grocery store near me has filters and when you get on their guest WiFi you can place a call for a couple seconds before it kills the connection.
Click to expand...
Click to collapse
Disabling the MAC address randomization did the trick. Been on and stable since I turned it off. Thanks again
A new problem have emerged in this same topic.
Using the same phone, same sim, same wifi, same settings (disabled mac address randomization) the wifi calling won't activate at all now. Any idea what I can do to trouble shoot? Wifi calling is turned on and set to preffered.