Hi i have a realy bad problem with my phone its an AT&T atrix 2 i live in greece and have my greek sim (Cosmote) inside and while i am in a call it just freezes and sometimes for no reason it has no signal at all (its sure that one of this will hapen every day)
i have tried to change my rom but it's not helping
Can anyone help me?
sorry for my english
biupil said:
Hi i have a realy bad problem with my phone its an AT&T atrix 2 i live in greece and have my greek sim (Cosmote) inside and while i am in a call it just freezes and sometimes for no reason it has no signal at all (its sure that one of this will hapen every day)
i have tried to change my rom but it's not helping
Can anyone help me?
sorry for my english
Click to expand...
Click to collapse
Hi,im also using at&t atrix2 and i live in indonesia.
I was experience the same as you do,but now it's better.
Try sc v5.2 rom and then tweak the build.prop as i did.
Hope it works for you.
Last chance maybe you can try fxz to restore to 2.3.5.
In my opinion 2.3.5 has better signal,but i got sd card issue.
Sent from my MOTO
Atrix 2 signal
Hi there,
I had the same problem with my Atrix 2 when i updated to 2.3.6 OTA.
I downgraded to stock rom and everything works fine.
I tried a second OTA 2.3.6 update and signal dies several times a day.
I suggest using stock 2.3.5 rom to test the phone.
I don't know if there is actually a fix for this.
I recently reverted my Moto G back to stock firmware since none of the available ROMs were any good in my opinion. However, now that I've finally settled into my stock firmware and have decided to let Motorola be my update provider rather than spend all day trying out new ROMs, I have run into a little problem...
As of right now I am running a Moto G XT1031 on the Boost Mobile network with the following specs:
HW Version: P3C
Android Version: 4.3
Baseband Version: MSM8626BP_1032.3102.56.00R
Kernal Version: 3.4.0-g741c020-00001-gaf940d1
System Version: 14.14.9.falcon_cdma.Boost.en.US
Build Number: 14.10.0Q3.X-84-9
Well the issue now is that I have received an update on my phone from Motorola labeled as version: 173.44.18.en.US or in other words KitKat. I'd really like to update to this, but each time I click download now, it goes ahead and downloads the ~189.0MB file, and then asks me if I would like to install now, obviously yes, and powers off, goes into recovery and starts installing the update. BUT IT ALWAYS STOPS HALF WAY AND DISPLAYS ERROR AND THEN REBOOTS THE SYSTEM BACK TO NORMAL.
What could be the problem? My phone is currently rooted and has its bootloader unlocked. Do I need to be unrooted for the update to take place successfully?
Also, I was running TWRP 2.6.3.1, then CWM 6.0.4.6, and currently stock recovery but neither one gives me any better result.
Any help in greatly appreciated.
Best Regards,
David B.
davooo38 said:
I recently reverted my Moto G back to stock firmware since none of the available ROMs were any good in my opinion. However, now that I've finally settled into my stock firmware and have decided to let Motorola be my update provider rather than spend all day trying out new ROMs, I have run into a little problem...
As of right now I am running a Moto G XT1031 on the Boost Mobile network with the following specs:
HW Version: P3C
Android Version: 4.3
Baseband Version: MSM8626BP_1032.3102.56.00R
Kernal Version: 3.4.0-g741c020-00001-gaf940d1
System Version: 14.14.9.falcon_cdma.Boost.en.US
Build Number: 14.10.0Q3.X-84-9
Well the issue now is that I have received an update on my phone from Motorola labeled as version: 173.44.18.en.US or in other words KitKat. I'd really like to update to this, but each time I click download now, it goes ahead and downloads the ~189.0MB file, and then asks me if I would like to install now, obviously yes, and powers off, goes into recovery and starts installing the update. BUT IT ALWAYS STOPS HALF WAY AND DISPLAYS ERROR AND THEN REBOOTS THE SYSTEM BACK TO NORMAL.
What could be the problem? My phone is currently rooted and has its bootloader unlocked. Do I need to be unrooted for the update to take place successfully?
Also, I was running TWRP 2.6.3.1, then CWM 6.0.4.6, and currently stock recovery but neither one gives me any better result.
Any help in greatly appreciated.
Best Regards,
David B.
Click to expand...
Click to collapse
yep, you can't be rooted...bootloader unlock is ok. It sees a file is not correct and it will error out during update.
Cheers.
ckuke4 said:
yep, you can't be rooted...bootloader unlock is ok. It sees a file is not correct and it will error out during update.
Cheers.
Click to expand...
Click to collapse
Great! Thanks for the info.
I can always root it again afterwards, right?
Actually the update still won't take place. I just noticed, using CWM, that the error is being caused because "the update is for cdma" models only and my phone is "xt1031" I have a feeling that this might just be an issue with boost mobile having a crappy network, and this is just a mistake.
I thought it was too good to be true that Boost Mobile had released a KitKat version for the Moto G so fast
davooo38 said:
I thought it was too good to be true that Boost Mobile had released a KitKat version for the Moto G so fast
Click to expand...
Click to collapse
they did roll it out fast...
go back to non-rooted stock and then apply update.
(that's what I did and it worked.
btw, I activated the phone w/ Ring+ and still had the update pushed!)
But wait ! I have a boost Mobile version and I can find a way to root. Any help?
kr338r said:
they did roll it out fast...
go back to non-rooted stock and then apply update.
(that's what I did and it worked.
btw, I activated the phone w/ Ring+ and still had the update pushed!)
Click to expand...
Click to collapse
k i'll give that a try
davooo38 said:
I recently reverted my Moto G back to stock firmware since none of the available ROMs were any good in my opinion. However, now that I've finally settled into my stock firmware and have decided to let Motorola be my update provider rather than spend all day trying out new ROMs, I have run into a little problem...
As of right now I am running a Moto G XT1031 on the Boost Mobile network with the following specs:
HW Version: P3C
Android Version: 4.3
Baseband Version: MSM8626BP_1032.3102.56.00R
Kernal Version: 3.4.0-g741c020-00001-gaf940d1
System Version: 14.14.9.falcon_cdma.Boost.en.US
Build Number: 14.10.0Q3.X-84-9
Well the issue now is that I have received an update on my phone from Motorola labeled as version: 173.44.18.en.US or in other words KitKat. I'd really like to update to this, but each time I click download now, it goes ahead and downloads the ~189.0MB file, and then asks me if I would like to install now, obviously yes, and powers off, goes into recovery and starts installing the update. BUT IT ALWAYS STOPS HALF WAY AND DISPLAYS ERROR AND THEN REBOOTS THE SYSTEM BACK TO NORMAL.
What could be the problem? My phone is currently rooted and has its bootloader unlocked. Do I need to be unrooted for the update to take place successfully?
Also, I was running TWRP 2.6.3.1, then CWM 6.0.4.6, and currently stock recovery but neither one gives me any better result.
Any help in greatly appreciated.
Best Regards,
David B.
Click to expand...
Click to collapse
Wait, You have a CDMA model..how did you gain root? I thought only the GSM variants were able to have their bootloaders unlock officially and haven't seen anyone take a crack at the CDMA versions.
Verizon is not allowing unlocks. Boost is.
Sent from my Moto G using Tapatalk
Takenover83 said:
Verizon is not allowing unlocks. Boost is.
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
wow I didn't know that. Well it doesn't matter anyways since I've already done it
Yeah u can unlock boot loader on boost mobile. I did it 2 weeks ago and installed costum ROM and everything. Loving the phone even more
Sent from my XT1031 using xda app-developers app
QBANBOY407 said:
Yeah u can unlock boot loader on boost mobile. I did it 2 weeks ago and installed costum ROM and everything. Loving the phone even more
Sent from my XT1031 using xda app-developers app
Click to expand...
Click to collapse
Where do you go to unlock the BM Bootloader? Only the GSM varients are listed on the moto bootloader program page.
Boost MOTO G
QBANBOY407 said:
Yeah u can unlock boot loader on boost mobile. I did it 2 weeks ago and installed costum ROM and everything. Loving the phone even more
Sent from my XT1031 using xda app-developers app
Click to expand...
Click to collapse
How did u do it. It will be helpful for many, please explain
Thanks
Yes please explain. I have the XT1031(Boost Moto G) and when I go to the unlock page it still tells me my device isn't eligible for unlock.
I have the boost Moto G, and simply following the instructions for all the other Moto G's gave me an unlock, the moto site didn't complain in the least
Sent from my XT1031 using xda app-developers app
paste it on ms word first
Dont paste directly from cmd, paste it on ms word first n delete the all space. Then copy n paste it on motorola web
Can't unlock my BM moto G
Removed
Need help
I'm stuck and don't know what else to do. Is my phone paper weight now? It also won't charge/keep charge. Both my fiancé and I tried looking everywhere to fix it but it won't work. If anyone can help I would really appreciate it... I miss my phone, had to get a crappy cheap phone.
QBANBOY407 said:
Yeah u can unlock boot loader on boost mobile. I did it 2 weeks ago and installed costum ROM and everything. Loving the phone even more
Sent from my XT1031 using xda app-developers app
Click to expand...
Click to collapse
How did you end up doing it. I'm trying to unlock a boost mobile phone and I can't. Another question. Are you able to use tether or hotspot? Please your input will help me a lot. Thank you
witor19 said:
How did you end up doing it. I'm trying to unlock a boost mobile phone and I can't. Another question. Are you able to use tether or hotspot? Please your input will help me a lot. Thank you
Click to expand...
Click to collapse
What problems are you having with unlocking your device?
I've unlocked 3 Boost Moto G's - so I know it's possible. Check this out > https://forums.motorola.com/posts/35e4d3be5c
As far as Mobile Hotspot, yes, it's possible with a few edits.
Hi I'm Alex and I'm new in this community. I got this problem with fqrouter2, when I turn the WiFi repeater on it says "failed to start WiFi repeater: failed to start hotspot"
I don't know what's going on, it always worked when I had kk and now that I actually need it does not work.. Does anyone know how to get off this issue? Thanks
slither92 said:
Hi I'm Alex and I'm new in this community. I got this problem with fqrouter2, when I turn the WiFi repeater on it says "failed to start WiFi repeater: failed to start hotspot"
I don't know what's going on, it always worked when I had kk and now that I actually need it does not work.. Does anyone know how to get off this issue? Thanks
Click to expand...
Click to collapse
Made account just to bump this question... have been searching the web for weeks now. From xda to the chinese version of the one plus site to looking through the reppository myself. No answer, not one.
Same here. I even tried flashing the earliest version of android (CM11) I could find because I remembered reading it was not compatible with later versions of android. I think it's compatible up to jellybean and the N5 was released with KitKat
Did fqrouter2 ever work on Nexus 5, even older versions of Android?
Bump
Bump! Have the same problem.
Hi
My daughter has a 1st gen Moto G [XT1032] which is about 5 months old.
About a month ago the stock rom (Tesco uk) wouldn't boot and has she had cracked the screen it wasn't covered under the warranty.
So I rooted it and put on a stock Eu rom 4.4.4 and that seemed ok for about 2 weeks and then similar issues with booting.
So then I wiped everything and put on Cyanogenmod on 5.1.1 I think it was but that only lasted about 3 days before not booting,
I then tried a fresh copy of that again but last night she came to me with it and it was so buggy and jumpy and the home screen wouldn't load and it was massively overheating.
So I searched again for another stock rom of 4.4.4 and I put that on last night.
Do you think it could be a hardware problem that's causing it or am I just choosing unstable roms?
If so can anyone recommend a stable rom as there are so many to choose from.
Thanks for any advise
Sounds like hardware.
Mine was a Tesco phone on 4.4.4 now running optimized stock .br 5.0.2 from the development section and it's never ran better!
eemgee said:
Sounds like hardware.
Mine was a Tesco phone on 4.4.4 now running optimized stock .br 5.0.2 from the development section and it's never ran better!
Click to expand...
Click to collapse
Thanks I was thinking that because she dropped it and cracked the screen it's had a knock on effect... Not sure what hardware fault could cause it though
Hi all, I installed the nexus experience in my moto maxx XT1225 BR but the 4G signal went dead, 3G and 2G is working perfect and also everything else.
I did a full backup (just in case from the 5.02p) before and the 4G is working fine if I go back but the battery drain is just epic, with the original rom it last 8 hours and with the nexus experience 1,5 day.
Is there any way to extract the radio from a TPRW backup? Because I tried all the radios listed in here but can't get to work the 4G on custom rom
Thank you in advance to all.
MauroGL said:
Hi all, I installed the nexus experience in my moto maxx XT1225 BR but the 4G signal went dead, 3G and 2G is working perfect and also everything else.
I did a full backup (just in case from the 5.02p) before and the 4G is working fine if I go back but the battery drain is just epic, with the original rom it last 8 hours and with the nexus experience 1,5 day.
Is there any way to extract the radio from a TPRW backup? Because I tried all the radios listed in here but can't get to work the 4G on custom rom
Thank you in advance to all.
Click to expand...
Click to collapse
You tried the radios listed in the CM12.1 thread, post #1?
same problem here, after installing CM 12.1 nightly and the new baseband, my 4G LTE stopped working. before when i was on cyanogen + 5.0.2 baseband, LTE was working fine except for GPS .
ChazzMatt said:
You tried the radios listed in the CM12.1 thread, post #1?
Click to expand...
Click to collapse
Hello, yes I tried the both baseband for the BR version and neither of them worked (everything works fine except the lack of LTE