help I tried to flash vengeance kernel and I saw baseband error in about phone. I also tried flashing simple kernel but same error is shown. I dont know its effect (seems nothing at all base on phone use) but it I also dont know why it show error in abot phone menu.
.hekp, ive searched the thread but I dont know what module to be flashed they are talkinfg about.
have you unlock your bootloader?
yes I alteady unlocked bootloader
And flash the kernel again?
Sent from my C1905 using XDA Free mobile app
..yes i already tried to reflash vengeance kernel, and i also tried to flash simple kernel as well, but same problem occurred. However, if i revert to the stock kernel, the error doesn't show up.
ninjageda33 said:
help I tried to flash vengeance kernel and I saw baseband error in about phone. I also tried flashing simple kernel but same error is shown. I dont know its effect (seems nothing at all base on phone use) but it I also dont know why it show error in abot phone menu.
Click to expand...
Click to collapse
start from stock flash
Milton Pakhi said:
start from stock flash
Click to expand...
Click to collapse
thanks for this, i will try this later, just got my xperia j bricked :l
This is normal. I got that too. But it doesnt give any bug or error. The important is your baseband is working. Look your mobile signal is up.
it's okay now, i switched into seraphic rom with intuisy kernel. very nice kernel and rom.
Related
Hello guys,
Need help!
Flashed my Xperia J with CM10, FXP212.
Problem: I don't get network service.
Bluetooth and WiFi seem to work fine.
Thanks for any help
Edit: (If this helps in anyway) I dont see the FreeXP logo on startup, instead I get a green colored battery logo with the LED glowing red and then the CyanogenMod logo.
Edit 2:
I tried restoring the stock ROM from my backup.
The CWM recovery screen says restore complete. So I say" reboot now". It vibrates and then there is nothing on the screen except for the LED glowing red.
So I remove & re-insert the battery. Switch it on, but I can only enter recovery on purple LED glow. It always enters recovery.
So all I am able to do now is enter recovery and nowhere from there
What am I doing wrong?? Help guys!
Try to fastboot the kernel from the previous release.
your device the network locked
same problm with me :screwy:
---------------------------------
Sent from my GT-S5570L using Tapatalk 2
gavster26 said:
Try to fastboot the kernel from the previous release.
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
I tried the boot.img kernel from FXP211 but no help.
saitri said:
your device the network locked
same problm with me :screwy:
---------------------------------
Sent from my GT-S5570L using Tapatalk 2
Click to expand...
Click to collapse
Hi saitri,
Thanks for the reply.
There was no network lock on the stock ROM.
Maybe I miss something here. What exactly is network lock?
JL.93 said:
Maybe I have the solution! Try this:
1) Flash stock rom ICS
2) Flash CM10's kernel with Flashtool
3) Various wipe
4) Flash CM10 with CWM
Fixed?
--- I'm sorry for my English, I translate with Google translator ---
Click to expand...
Click to collapse
Thanks for the reply.
I tried doing that earlier but landed into a bigger problem.
I can't boot in. It always enters recovery. Tried restoring the stock ROM from my backup but didnt work, It doesnt boot. So I press the 'Vol Up' key and it enters recovery.
What might have gone wrong here??
Myuvin said:
Hi saitri,
Thanks for the reply.
There was no network lock on the stock ROM.
Maybe I miss something here. What exactly is network lock?
Click to expand...
Click to collapse
I also do not understand, after I install cm10 210 and there was such a
saitri said:
I also do not understand, after I install cm10 210 and there was such a
Click to expand...
Click to collapse
Hi saitri,
U can flash a stock ROM, either ICS or JB using flashtool. Your phone will be unrooted. Bootloader remains unlocked.
You can then root it and install any other custom ROM. Though I havent installed a custom ROM yet after flashing the stock ROM.
Will let you know when I do it. Meanwhile you can flash a stock ROM. Let me knw if u need any assistance.
All those who replied: Thanks for your support and time.
Hey Guys ..I Flashed cwm on xperia e using the modded kernel http://forum.xda-developers.com/showthread.php?t=2276943 and now my wifi isnt working....can somebody give me the wifi modules ..pLEASSE wifi is very important to me,..:crying: ..........5 minutes of your time can make a change:fingers-crossed:
The WiFi module is there, but the kernel you installed cannot work with it. I think you have 2.23 firmware, which does not have any compatible kernels at the moment.
TheindianGuy said:
Hey Guys ..I Flashed cwm on xperia e using the modded kernel http://forum.xda-developers.com/showthread.php?t=2276943 and now my wifi isnt working....can somebody give me the wifi modules ..pLEASSE wifi is very important to me,..:crying: ..........5 minutes of your time can make a change:fingers-crossed:
Click to expand...
Click to collapse
cwm won't work on 11.3.a.2.23 (guess you have that) . just flash stock kernel and WiFi will work again
compatible kerne; of 2.23 firmware
NSDCars5 said:
The WiFi module is there, but the kernel you installed cannot work with it. I think you have 2.23 firmware, which does not have any compatible kernels at the moment.
Click to expand...
Click to collapse
when will be the compatible kernel of 2.23 firmware available????any hints??
loveingrup2 said:
when will be the compatible kernel of 2.23 firmware available????any hints??
Click to expand...
Click to collapse
I'd say as soon as a month or something after Sony releases the 2.23 source.
I do this for CWM: I keep the 0.47 CWM and the 2.23 stock kernels. When I need CWM, I flash it via fastboot and use it. When I'm done with it, I flash back stock using Flashtool.
NSDCars5 said:
I'd say as soon as a month or something after Sony releases the 2.23 source.
I do this for CWM: I keep the 0.47 CWM and the 2.23 stock kernels. When I need CWM, I flash it via fastboot and use it. When I'm done with it, I flash back stock using Flashtool.
Click to expand...
Click to collapse
hey man, telll me if this will work...i have the ftf file of 2.23 installed and i need cwm so......if i flash the cwm kernel will it work properly?? Im asking this since when i flashed the cwm kernel over the 2.13 firmware, THE WIFI STOPPED WORKING....just need to know if there is any method in which i can get cwm ...tanx..
TheindianGuy said:
hey man, telll me if this will work...i have the ftf file of 2.23 installed and i need cwm so......if i flash the cwm kernel will it work properly?? Im asking this since when i flashed the cwm kernel over the 2.13 firmware, THE WIFI STOPPED WORKING....just need to know if there is any method in which i can get cwm ...tanx..
Click to expand...
Click to collapse
Sure there is - the one I used till I got CM10. Flash the 0.47 FTF, then flash CWM kernel. Will work awesome.
As for where to get the 0.47 FTF, check this out: http://d-h.st/ufn Found this on Google, thanks to whoever generous guy uploaded it!
If you're wondering (like many others), even if you have a C1504, the C1505 firmware will work awesome, other than the occasional network drop (like when you're on the ground floor in a tall building with no windows nearby).
Hi again. I have a problem with the CWM for unlocked bootloader. When I tried to restore from my backup, a message appear saying "error mounting system" and "error mounting data" and not restore anything (when I power on the phone again, nothing changes). Can somebody help me? Sorry for my bad English.
Evedammo said:
Hi again. I have a problem with the CWM for unlocked bootloader. When I tried to restore from my backup, a message appear saying "error mounting system" and "error mounting data" and not restore anything (when I power on the phone again, nothing changes). Can somebody help me? Sorry for my bad English.
Click to expand...
Click to collapse
which kernel you are using?
i had faced this on stockkernel with cwm...so i used phantom and thunderzap kernel Nd their cwn was working perfectly...
btw in cwm 1st try to go and mount data,mount system...then try to.restore/advance restore...may be it will help you
live.hardik said:
which kernel you are using?
i had faced this on stockkernel with cwm...so i used phantom and thunderzap kernel Nd their cwn was working perfectly...
btw in cwm 1st try to go and mount data,mount system...then try to.restore/advance restore...may be it will help you
Click to expand...
Click to collapse
I tried but only I can restore data. When I tried to restoresystem this message appear: error while formatting system!!". How I can solve this problem?
If live.hardik says right, you have to flash custom kernel like ThunderZap, Phantom, Civic etc.
aleksander002 said:
If live.hardik says right, you have to flash custom kernel like ThunderZap, Phantom, Civic etc.
Click to expand...
Click to collapse
But I have locked bootloader
Evedammo said:
But I have locked bootloader
Click to expand...
Click to collapse
Hardluck for locked bootloader....
Cwm for locked bootloader is not working it can't restore and also it can't install zip....
Nobody help me? I flashed two times and the error persist. I can't install another kernel 'cause i have locked bootloader.
Evedammo said:
Nobody help me? I flashed two times and the error persist. I can't install another kernel 'cause i have locked bootloader.
Click to expand...
Click to collapse
Recovery for locked bootloader still under dev..its not stable yet as unlock one..you can entered it but cannot flash anything either restored..
Just unlocked bootloader or wait till dev done with the project..
There is one... But it is under dev at the moment, you can install it, because it's working obviously, but you won't see it clearly because it has some graphic glitches
LUCK!
Sent from my C2105 using xda app-developers app
First of all srry for my english :silly:
I have the Z3 6603
few months ago i can "taste" Cyanogen but i really don't like, so i came back to Stock.
I had some problems locking and unlocking bootloader, but was solved (thanxs xda users ) and now i have this problem. I can't flash any custom rom, only stock.
1-Bootloader is unlocked
2-I tried clean flash
3-I tried to flash Euphoria, CM, Carbon....
On TWRP gives me an error, it says that my device is leo. So i tried to change the updater-script, gives me another error so i can't flash.
On CWM give me Status 7 ...
Hope somebody can help me :crying:
Info
Spector_Prophet said:
First of all srry for my english :silly:
I have the Z3 6603
few months ago i can "taste" Cyanogen but i really don't like, so i came back to Stock.
I had some problems locking and unlocking bootloader, but was solved (thanxs xda users ) and now i have this problem. I can't flash any custom rom, only stock.
1-Bootloader is unlocked
2-I tried clean flash
3-I tried to flash Euphoria, CM, Carbon....
On TWRP gives me an error, it says that my device is leo. So i tried to change the updater-script, gives me another error so i can't flash.
On CWM give me Status 7 ...
Hope somebody can help me :crying:
Click to expand...
Click to collapse
did u download the correct rom?
Please send pic of error msg and link u download the rom files
:good:
Geeks Empire said:
did u download the correct rom?
Please send pic of error msg and link u download the rom files
:good:
Click to expand...
Click to collapse
http://forum.xda-developers.com/z3/development/rom-t3121048
http://forum.xda-developers.com/z3/orig-development/rom-glade-rom-t3063017
http://forum.xda-developers.com/z3/development/rom-cyanogenmod-12-nightlies-xperia-z3-t3010201
http://forum.xda-developers.com/z3/development/rom-aicp-9-0-z3-t3127286
i tried with this roms, right now i can't try to flash, but when i can i'll post a screenshot :good:
Hi guys.
Anyone using D2202/2212 had any success flashing the new bootloader?
Is there a way of flashing the bootloader without using EMMA since it doesn't work with our variant?
If someone can shed any light in this subject, that would be awesome. thanks in advance.
Morecs said:
Hi guys.
Anyone using D2202/2212 had any success flashing the new bootloader?
Is there a way of flashing the bootloader without using EMMA since it doesn't work with our variant?
If someone can shed any light in this subject, that would be awesome. thanks in advance.
Click to expand...
Click to collapse
just download d2203 Open device bootloader FTF from here http://forum.xda-developers.com/xperia-e3/development/ftf-device-18-5-c-0-19-t3136514 it will work..
old bootloder for d2212 can be used to return to stock one on d2212\d2202..
and if you flash then can you report me if
this cm11 works with it => http://forum.xda-developers.com/showpost.php?p=62899232&postcount=10
and you can also try aosp mashmellow/lollipop there are chances of them getting working but RIL will not.. maby by flashing stock ril,s it might work too..
vinay said:
just download d2203 Open device bootloader FTF from here http://forum.xda-developers.com/xperia-e3/development/ftf-device-18-5-c-0-19-t3136514 it will work..
old bootloder for d2212 can be used to return to stock one on d2212\d2202..
and if you flash then can you report me if
this cm11 works with it => http://forum.xda-developers.com/showpost.php?p=62899232&postcount=10
and you can also try aosp mashmellow/lollipop there are chances of them getting working but RIL will not.. maby by flashing stock ril,s it might work too..
Click to expand...
Click to collapse
going to test the bootloader w/ CM11 right away.
Morecs said:
going to test the bootloader w/ CM11 right away.
Click to expand...
Click to collapse
bootloader bricked my device, just black screen and no sign of life. going back to stock bootloader
after flashing the open devices bootloader I couldn't access the recovery, wasn't sure of what I should do so just decided to go back to stock.
maybe I should have tried to push CM11 via ADB, but I don't have a lot of experience using ADB.
what do you think @vinay, should I try doing it?
Morecs said:
bootloader bricked my device, just black screen and no sign of life. going back to stock bootloader
after flashing the open devices bootloader I couldn't access the recovery, wasn't sure of what I should do so just decided to go back to stock.
maybe I should have tried to push CM11 via ADB, but I don't have a lot of experience using ADB.
what do you think @vinay, should I try doing it?
Click to expand...
Click to collapse
flash rom first then flash bootloader.
vinay said:
flash rom first then flash bootloader.
Click to expand...
Click to collapse
no luck, Flashed CM11, then the bootloader. black screen.
Morecs said:
no luck, Flashed CM11, then the bootloader. black screen.
Click to expand...
Click to collapse
it,s gonna be hard to port aosp L/M - cm12/13 if we don,t have any stable rom for open device bootloader.
see if AOSP M boot up on this. you can use fastboot flash in new bootloader this time..
Xperia E3 D2212, CM12/13
vinay said:
just download d2203 Open device bootloader FTF from here http://forum.xda-developers.com/xperia-e3/development/ftf-device-18-5-c-0-19-t3136514 it will work..
old bootloder for d2212 can be used to return to stock one on d2212\d2202..
and if you flash then can you report me if
this cm11 works with it => http://forum.xda-developers.com/showpost.php?p=62899232&postcount=10
and you can also try aosp mashmellow/lollipop there are chances of them getting working but RIL will not.. maby by flashing stock ril,s it might work too..
Click to expand...
Click to collapse
can you give a working link for xperia e3 dual d2212 cyanogenmod 12/12.1/13 mode install
because fxp flamingo cm 12 installed is falled
vinay said:
it,s gonna be hard to port aosp L/M - cm12/13 if we don,t have any stable rom for open device bootloader.
see if AOSP M boot up on this. you can use fastboot flash in new bootloader this time..
Click to expand...
Click to collapse
still no sign of life.
flashed the new bootloader again and pushed all AOSP M files.
still only a black screen, no sign of life out of this bootloader for D2212.
CM11 is the last hope for a custom AOSP based rom for D2212 users.
See my D2212https://dl.dropboxusercontent.com/content_link/2Yko668zLlwvL6zNZLQQSleEcjvr64j2YPAwo9OZMaAuRtlSlRkhkyNtkJGcgZSA/file?dl=1