Hi guys.
Anyone using D2202/2212 had any success flashing the new bootloader?
Is there a way of flashing the bootloader without using EMMA since it doesn't work with our variant?
If someone can shed any light in this subject, that would be awesome. thanks in advance.
Morecs said:
Hi guys.
Anyone using D2202/2212 had any success flashing the new bootloader?
Is there a way of flashing the bootloader without using EMMA since it doesn't work with our variant?
If someone can shed any light in this subject, that would be awesome. thanks in advance.
Click to expand...
Click to collapse
just download d2203 Open device bootloader FTF from here http://forum.xda-developers.com/xperia-e3/development/ftf-device-18-5-c-0-19-t3136514 it will work..
old bootloder for d2212 can be used to return to stock one on d2212\d2202..
and if you flash then can you report me if
this cm11 works with it => http://forum.xda-developers.com/showpost.php?p=62899232&postcount=10
and you can also try aosp mashmellow/lollipop there are chances of them getting working but RIL will not.. maby by flashing stock ril,s it might work too..
vinay said:
just download d2203 Open device bootloader FTF from here http://forum.xda-developers.com/xperia-e3/development/ftf-device-18-5-c-0-19-t3136514 it will work..
old bootloder for d2212 can be used to return to stock one on d2212\d2202..
and if you flash then can you report me if
this cm11 works with it => http://forum.xda-developers.com/showpost.php?p=62899232&postcount=10
and you can also try aosp mashmellow/lollipop there are chances of them getting working but RIL will not.. maby by flashing stock ril,s it might work too..
Click to expand...
Click to collapse
going to test the bootloader w/ CM11 right away.
Morecs said:
going to test the bootloader w/ CM11 right away.
Click to expand...
Click to collapse
bootloader bricked my device, just black screen and no sign of life. going back to stock bootloader
after flashing the open devices bootloader I couldn't access the recovery, wasn't sure of what I should do so just decided to go back to stock.
maybe I should have tried to push CM11 via ADB, but I don't have a lot of experience using ADB.
what do you think @vinay, should I try doing it?
Morecs said:
bootloader bricked my device, just black screen and no sign of life. going back to stock bootloader
after flashing the open devices bootloader I couldn't access the recovery, wasn't sure of what I should do so just decided to go back to stock.
maybe I should have tried to push CM11 via ADB, but I don't have a lot of experience using ADB.
what do you think @vinay, should I try doing it?
Click to expand...
Click to collapse
flash rom first then flash bootloader.
vinay said:
flash rom first then flash bootloader.
Click to expand...
Click to collapse
no luck, Flashed CM11, then the bootloader. black screen.
Morecs said:
no luck, Flashed CM11, then the bootloader. black screen.
Click to expand...
Click to collapse
it,s gonna be hard to port aosp L/M - cm12/13 if we don,t have any stable rom for open device bootloader.
see if AOSP M boot up on this. you can use fastboot flash in new bootloader this time..
Xperia E3 D2212, CM12/13
vinay said:
just download d2203 Open device bootloader FTF from here http://forum.xda-developers.com/xperia-e3/development/ftf-device-18-5-c-0-19-t3136514 it will work..
old bootloder for d2212 can be used to return to stock one on d2212\d2202..
and if you flash then can you report me if
this cm11 works with it => http://forum.xda-developers.com/showpost.php?p=62899232&postcount=10
and you can also try aosp mashmellow/lollipop there are chances of them getting working but RIL will not.. maby by flashing stock ril,s it might work too..
Click to expand...
Click to collapse
can you give a working link for xperia e3 dual d2212 cyanogenmod 12/12.1/13 mode install
because fxp flamingo cm 12 installed is falled
vinay said:
it,s gonna be hard to port aosp L/M - cm12/13 if we don,t have any stable rom for open device bootloader.
see if AOSP M boot up on this. you can use fastboot flash in new bootloader this time..
Click to expand...
Click to collapse
still no sign of life.
flashed the new bootloader again and pushed all AOSP M files.
still only a black screen, no sign of life out of this bootloader for D2212.
CM11 is the last hope for a custom AOSP based rom for D2212 users.
See my D2212https://dl.dropboxusercontent.com/content_link/2Yko668zLlwvL6zNZLQQSleEcjvr64j2YPAwo9OZMaAuRtlSlRkhkyNtkJGcgZSA/file?dl=1
Related
I am looking for the clear way of installing adb drivers for my xperia J for the rooting process.
I am very new to these areas so please mention clearly.
Thank you.
rajagennu said:
I am looking for the clear way of installing adb drivers for my xperia J for the rooting process.
I am very new to these areas so please mention clearly.
Thank you.
Click to expand...
Click to collapse
Install Sony PC Companion, connect the phone to pc and the ADB drivers will be install automatically.
If you are in 11.2.A.0.33 firmware then you need to downgrade it to 11.2.A.0.31 in order to Root your phone.
You need to use Flashtool to downgrade your phone. Click Here to download Flashtool
& for download 11.2.A.0.31 firmware Click Here
Search here to learn how to flash ftf using Flashtool.
And finally root your phone, Click Here to get DoomLord Rooting Toolkit.
I have successfully installed ADB drivers from the universal adb drivers. My mobile rooted too.
Now I am not getting whats next.
I am using xperia J.
Bootloader unlocked.
rooted.
Thank you.
rajagennu said:
I have successfully installed ADB drivers from the universal adb drivers. My mobile rooted too.
Now I am not getting whats next.
I am using xperia J.
Bootloader unlocked.
rooted.
Thank you.
Click to expand...
Click to collapse
You can try Custom ROM. Currently i am using AVD Rom, one of the best Stock based custom ROM for Xperia J, it works with both Locked & Unlocked Bootloader. Also you can try CM10.
Every ROM is different made in accordance with the user experiences and requirements.
How to
arifkpi said:
You can try Custom ROM. Currently i am using AVD Rom, one of the best Stock based custom ROM for Xperia J, it works with both Locked & Unlocked Bootloader. Also you can try CM10.
Every ROM is different made in accordance with the user experiences and requirements.
Click to expand...
Click to collapse
How to install ? I am very much new to this world. If i see those turotial pages its sounds some thing new. Can you please guide me . Please.
is downgrade to ICS must ?
Brother I have downloaded
1.AVD Rom Latest Release
2.Addon Archive
3.Kernel ftf:
I have few questions from the instructions.
How to do
6) Next take out battery open flashtool & flash my kernel ftf
Click to expand...
Click to collapse
and Is downgrading to ICS is must here ?
rajagennu said:
Brother I have downloaded
1.AVD Rom Latest Release
2.Addon Archive
3.Kernel ftf:
I have few questions from the instructions.
How to do
and Is downgrading to ICS is must here ?
Click to expand...
Click to collapse
Nope you dont have to downgrade , but if you want cm its better to flash baseband before cause of gsm fix
CM means ?
AgroCPU said:
Nope you dont have to downgrade , but if you want cm its better to flash baseband before cause of gsm fix
Click to expand...
Click to collapse
what stands for cm here .
I want a complete working mobile after installing ROM , what do you suggest my friend ?
rajagennu said:
Brother I have downloaded
1.AVD Rom Latest Release
2.Addon Archive
3.Kernel ftf:
I have few questions from the instructions.
How to do
and Is downgrading to ICS is must here ?
Click to expand...
Click to collapse
rajagennu said:
what stands for cm here .
I want a complete working mobile after installing ROM , what do you suggest my friend ?
Click to expand...
Click to collapse
Cm=cyanogenmod
And...in my opinion stock cm10 +riches kernel is faster than stock so if you want to overclock cpu and such things , install cm. but before , flash stock 4.0.4 dunno which build number it is XD
cause when not your gsm is not working
And another good thing, think you know it, riches kernel comes with dual recovery
AgroCPU said:
Cm=cyanogenmod
And...in my opinion stock cm10 +riches kernel is faster than stock so if you want to overclock cpu and such things , install cm. but before , flash stock 4.0.4 dunno which build number it is XD
cause when not your gsm is not working
And another good thing, think you know it, riches kernel comes with dual recovery
Click to expand...
Click to collapse
Ok I will continue with AVD ROM , seems easier than that. But how to do this
Next take out battery open flashtool & flash my kernel ftf
Click to expand...
Click to collapse
can you explain more clearly ?
Thank you.
rajagennu said:
Ok I will continue with AVD ROM , seems easier than that. But how to do this
can you explain more clearly ?
Thank you.
Click to expand...
Click to collapse
Ehm first is your bootloader unlocked?
When yes flash boot.img from cm then boot into recovery . Make factory reset,cache and dalvik wipe and go to mounts and storage , format system ... install avd rom , make permission fix (its in advanced) then dont reboot it , just take out battery then flash vengeance,simple or the stock kernel
AgroCPU said:
Ehm first is your bootloader unlocked?
When yes flash boot.img from cm then boot into recovery . Make factory reset,cache and dalvik wipe and go to mounts and storage , format system ... install avd rom , make permission fix (its in advanced) then dont reboot it , just take out battery then flash vengeance,simple or the stock kernel
Click to expand...
Click to collapse
after fixing permissions phone will be still on right ? it wont be any problem ? how to do flashing kernel ?
rajagennu said:
after fixing permissions phone will be still on right ? it wont be any problem ? how to do flashing kernel ?
Click to expand...
Click to collapse
Yes its still on after that ...ehm... and which kernel do want
AgroCPU said:
Yes its still on after that ...ehm... and which kernel do want
Click to expand...
Click to collapse
then dont reboot it , just take out battery then flash vengeance,simple or the stock kernel
Click to expand...
Click to collapse
I have downloaded their kernel
https://mega.co.nz/#!KlZlSLBI!InCg31egMl8AkW2MwiQkxhkyuN9yAmlJVuTtNt1tWgM
how to install it . I have not done that step.
please I am in middle help me.
Hey, after seeing the stable cm11 i thought it was time to unlock bootloader.. so I downloaded flashtool, then did all the steps for unlocking bootloader. When I tried booting, bootloop occurs.. What should I do?
hexr96 said:
Hey, after seeing the stable cm11 i thought it was time to unlock bootloader.. so I downloaded flashtool, then did all the steps for unlocking bootloader. When I tried booting, bootloop occurs.. What should I do?
Click to expand...
Click to collapse
Did you search and read that thread?
http://forum.xda-developers.com/xpe...orial-bootloader-unlocking-relocking-t2332900
On the end with Red color:
PS: You may run into bootloop or some other problems after unlocking bootloader. Simply flash stock FTF to fix.
Yes this is the thread I followed to the word..
I'll have to download the stock ftf? :\
I just read it somewhere that flashing a cwm recovery and wiping caches will remove the bootloop.. isnt that a better route to go through?
siankatabg said:
Did you search and read that thread?
http://forum.xda-developers.com/xpe...orial-bootloader-unlocking-relocking-t2332900
On the end with Red color:
PS: You may run into bootloop or some other problems after unlocking bootloader. Simply flash stock FTF to fix.
Click to expand...
Click to collapse
Better download stock ftf,because you will need it anyway someday when you mess your phone with roms,mods,fix...
Okay it's flashing
Just another question, the install recovery option is greyed out.. what do I do?
siankatabg said:
Better download stock ftf,because you will need it anyway someday when you mess your phone with roms,mods,fix...
Click to expand...
Click to collapse
hexr96 said:
Okay it's flashing
Just another question, the install recovery option is greyed out.. what do I do?
Click to expand...
Click to collapse
Just flash kernel with integrated recovery.
Guys i need your help! I have xperia l c2105 with 15.3.A.17 firmware. I just used this http://forum.xda-developers.com/xpe...orial-bootloader-unlocking-relocking-t2332900 tutorial and now my device is not booting. I need you to tell me step by step what to do to repair this and i promise i will not try anything else if im not sure about it
GiwrgosP- said:
Guys i need your help! I have xperia l c2105 with 15.3.A.17 firmware. I just used this http://forum.xda-developers.com/xpe...orial-bootloader-unlocking-relocking-t2332900 tutorial and now my device is not booting. I need you to tell me step by step what to do to repair this and i promise i will not try anything else if im not sure about it
Click to expand...
Click to collapse
can u go to flashmode and fastboot mode?
after doing the steps in unlocking did u try to reflash the stock ftf?if not, try it first.
mizukage said:
can u go to flashmode and fastboot mode?
after doing the steps in unlocking did u try to reflash the stock ftf?if not, try it first.
Click to expand...
Click to collapse
I relocked bootloader and repaired it from PC companion.. If you own this phone do you wanna tell me your current rom and kernel u are using now? (and if you overclocked tell me your frequences )
GiwrgosP- said:
I relocked bootloader and repaired it from PC companion.. If you own this phone do you wanna tell me your current rom and kernel u are using now? (and if you overclocked tell me your frequences )
Click to expand...
Click to collapse
Current ROM: Stock
Kernel: Thunderzap
Bootanimation: using LG G Watch bootanimation [http://forum.xda-developers.com/xperia-l/themes-apps/lg-g-watch-bootanimation-xperia-l-res-t2773711]
Rooted and Unlock Bootloader
Using Xposed to customize the looks of my stock rom.
been trying Custom rom but i always found a bug so still go back to stock
mizukage said:
Current ROM: Stock
Kernel: Thunderzap
Bootanimation: using LG G Watch bootanimation [http://forum.xda-developers.com/xperia-l/themes-apps/lg-g-watch-bootanimation-xperia-l-res-t2773711]
Rooted and Unlock Bootloader
Using Xposed to customize the looks of my stock rom.
been trying Custom rom but i always found a bug so still go back to stock
Click to expand...
Click to collapse
Now are you able to get OTA updates from sony? Or even updates from pc companion?
GiwrgosP- said:
Now are you able to get OTA updates from sony? Or even updates from pc companion?
Click to expand...
Click to collapse
yup i got an update to .17 but i never update it. no development for .17 fw.
Hey all,
Can someone explain me how to flash this version of CM 12 ? (link here, look for flamingo codename http://click.xda-developers.com/api... Pg. 4 | Sony Xperia E3 | XDA Forums&txt=here )
I tried cwm got softbrick
i tried the recovery from cm 12 from the dl package and got perma bootloops
I tried Flashtools but nothing happpens cause of the format type from system file
how to flash this rom with adb then? if its possible
Exerath said:
Hey all,
Can someone explain me how to flash this version of CM 12 ? (link here, look for flamingo codename http://click.xda-developers.com/api... Pg. 4 | Sony Xperia E3 | XDA Forums&txt=here )
I tried cwm got softbrick
i tried the recovery from cm 12 from the dl package and got perma bootloops
I tried Flashtools but nothing happpens cause of the format type from system file
how to flash this rom with adb then? if its possible
Click to expand...
Click to collapse
Do you have a 2203 variant?
adrianocolvero said:
Do you have a 2203 variant?
Click to expand...
Click to collapse
I have the D2203
adrianocolvero said:
Do you have a 2203 variant?
Click to expand...
Click to collapse
i got the same problem too
Same with me also.
Files must be encrypted for fxp dev,s only untill release. that,s was front page won,t show any cm12 for e3(flamingo) it must be worse than even android L aosp.
Use SONY AOSP instead of CM12
I think its a better choice to follow official Sony AOSP Lollipop 5.0 method instead using Cyanogenmod 12. It doesnt matter if is D22XX (XX mean 02/03/06/12/43)
http://developer.sonymobile.com/kno...e/open-devices/list-of-devices-and-resources/
https://github.com/sonyxperiadev/device-sony-flamingo
Also, AOSP is closer to pureness in android, because even cyanogenmod have useful tricks that are not so pure.
@Exerath Try the AOSP and tell us!
lexiyuri said:
I think its a better choice to follow official Sony AOSP Lollipop 5.0 method instead using Cyanogenmod 12. It doesnt matter if is D22XX (XX mean 02/03/06/12/43)
http://developer.sonymobile.com/kno...e/open-devices/list-of-devices-and-resources/
https://github.com/sonyxperiadev/device-sony-flamingo
Also, AOSP is closer to pureness in android, because even cyanogenmod have useful tricks that are not so pure.
@Exerath Try the AOSP and tell us!
Click to expand...
Click to collapse
means i flash cm12 or AOSP % ion my xperia e3 d2202
lexiyuri said:
I think its a better choice to follow official Sony AOSP Lollipop 5.0 method instead using Cyanogenmod 12. It doesnt matter if is D22XX (XX mean 02/03/06/12/43)
http://developer.sonymobile.com/kno...e/open-devices/list-of-devices-and-resources/
https://github.com/sonyxperiadev/device-sony-flamingo
Also, AOSP is closer to pureness in android, because even cyanogenmod have useful tricks that are not so pure.
@Exerath Try the AOSP and tell us!
Click to expand...
Click to collapse
@lexiyuri
I tried AOSP 5.0 BUT the only thing that makes me go back to kitkat is the knew bug with photos, If I can't take photos with my phone, I just can't work (I need to take photos oftens because I work on a "chantier" (not sure about the word but know as Dockyard too)
I would be happy to use AOSP and a working camera, if possible having root too so, if you have the solution --- Tell me how please
UP
I'm using 'AOSP_L_150129_flamingo' rooted - no camera, no gps ,no video and no recovery, Wifi was working but now it's not, bluetooth is good. I then flashed the boot image from 'Cwm20150203-UNOFFICIAL-flamingo' and now have recovery and still rooted.
So lots o good things but it's not usable yet.
westroger said:
I'm using 'AOSP_L_150129_flamingo' rooted - no camera, no gps ,no video and no recovery, Wifi was working but now it's not, bluetooth is good. I then flashed the boot image from 'Cwm20150203-UNOFFICIAL-flamingo' and now have recovery and still rooted.
So lots o good things but it's not usable yet.
Click to expand...
Click to collapse
how about battery life? do you experience any partial wakelocks?
noobAKO said:
how about battery life? do you experience any partial wakelocks?
Click to expand...
Click to collapse
No, battery life seemed ok, but I didn't pay too much attention to it. I've gone back to stock now.
hi,
I tried to flash FXP cm12 to my phone, and followed by this steps:
- I downloaded FXP-cm-12-20150209-UNOFFICIAL-flamingo.zip from here.
- Extract boot.img from zip.
- Flashed boot.img to my D2203. ( fastboot flash boot boot.img )
- Turn on the phone.
- When I pressed the Vol-Down key, when the purple light is on, I thought, the CWM will come, but it isn't.
- Nothing happened.
1st question: what did I do wrong?
2nd question: how can be flash the FXP cm12 to the D2203?
3rd question: from where can be download the working(!!) boot.img to cm12?
Thanks for reply.
ps: of course, at the end of the process, the rooted boot.img went back to the phone, and now it's working well...
furtongy said:
hi,
I tried to flash FXP cm12 to my phone, and followed by this steps:
- I downloaded FXP-cm-12-20150209-UNOFFICIAL-flamingo.zip from here.
- Extract boot.img from zip.
- Flashed boot.img to my D2203. ( fastboot flash boot boot.img )
- Turn on the phone.
- When I pressed the Vol-Down key, when the purple light is on, I thought, the CWM will come, but it isn't.
- Nothing happened.
1st question: what did I do wrong?
2nd question: how can be flash the FXP cm12 to the D2203?
3rd question: from where can be download the working(!!) boot.img to cm12?
Thanks for reply.
ps: of course, at the end of the process, the rooted boot.img went back to the phone, and now it's working well...
Click to expand...
Click to collapse
Try pressing volume key up and down till cwm boots.
westroger said:
Try pressing volume key up and down till cwm boots.
Click to expand...
Click to collapse
thanks, good idea, bur not working.
ps: are you tried too?
Return to stock inmediately and wait until sony releases an official lollipop. Stock is nice and you can use it everyday
But if you want lollipop so bad
Currently, FXP CM12 is not working well, but AOSP is working with bugs (no camera, no wake up) but is better than FXP CM12
I was dowload the FXP-cm-12-20150302-UNOFFICIAL-flamingo.zip,
from here.
Extract boot.img from zip, and flashed. ( fastboot flash boot boot.img )
Does anyone know how to, which keys press exactly to get CWM recovery?
VolumeUp or VolumeDown don't working.
I have D2203.
CM11 and CM12 now working on D2203
CM11 no bugs, everything working (NFC dont count as bug cause its just useless...)
CM12 almost same bugs as AOSP + no sound in rear speaker
My xperial L c2105 phone doesn't power on. When I press the power button the phone vibrate, but there are not any word in the screen.
When I connect the charger it doesn't charge.
But fastboot mode and flashmode work correctly.
Sometimes the red indicate light shows continuesly
Priyamal said:
My xperial L c2105 phone doesn't power on. When I press the power button the phone vibrate, but there are not any word in the screen.
When I connect the charger it doesn't charge.
But fastboot mode and flashmode work correctly.
Sometimes the red indicate light shows continuesly
Click to expand...
Click to collapse
Before I start to offer ideas on the issue do you have any idea what caused this to start?
Did you flash a custom ROM/Recovery/Firmware to the phone or did it just stop working ?
TechMinerUK said:
Before I start to offer ideas on the issue do you have any idea what caused this to start?
Did you flash a custom ROM/Recovery/Firmware to the phone or did it just stop working ?
Click to expand...
Click to collapse
Yes. I try to unlock bootloader by official way. But i couldnt unlock it on that way. So I unlocked it using flash tool.
Then i install cwm recovery. But after that i couldnt turn on my phone. I think i did some mistake.
Priyamal said:
Yes. I try to unlock bootloader by official way. But i couldnt unlock it on that way. So I unlocked it using flash tool.
Then i install cwm recovery. But after that i couldnt turn on my phone. I think i did some mistake.
Click to expand...
Click to collapse
Then the best option is to download the flashing tool for your device and flash the stock firmware to it using fastboot. That should get it into a working state which you can then work from to install a custom recovery.
TechMinerUK said:
Then the best option is to download the flashing tool for your device and flash the stock firmware to it using fastboot. That should get it into a working state which you can then work from to install a custom recovery.
Click to expand...
Click to collapse
I flash a stock fermware. Now start the phone and get bootloop. Please help me to solove this.
My phone is sony xperia L c2105
Build number : 15.3.a.1.17
Priyamal said:
I flash a stock fermware. Now start the phone and get bootloop. Please help me to solove this.
My phone is sony xperia L c2105
Build number : 15.3.a.1.17
Click to expand...
Click to collapse
Before booting/after flashing the firmware make sure you reset the device in recovery so it has a "clean slate" to boot to as this should remove any old apps/settings from the previous firmware/ROM that could cause it to bootloop
TechMinerUK said:
Then the best option is to download the flashing tool for your device and flash the stock firmware to it using fastboot. That should get it into a working state which you can then work from to install a custom recovery.
Click to expand...
Click to collapse
TechMinerUK said:
Before booting/after flashing the firmware make sure you reset the device in recovery so it has a "clean slate" to boot to as this should remove any old apps/settings from the previous firmware/ROM that could cause it to bootloop
Click to expand...
Click to collapse
Thank you for help. Now my phone work well. Thank you again.
Priyamal said:
Thank you for help. Now my phone work well. Thank you again.
Click to expand...
Click to collapse
I don't suppose you could use the thanks button ?