Database Info

[HOWTO] Flash DOWNLOAD firmware on P690

Bricked Phone Rooted Phone Need Original firmware to get warranty i am here to help you.
FIRST OF ALL DOWNLOAD FACTORY ROM FROM THIS LINK:-
Code:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP690/AINDBK/V10e_00.01/V10E_00.01.kdz
NOTE:- ABOVE LINK OF ROM IS INDIAN ROM ALTHOUGHT IT CONTAINS EVERY LANGUAGE BUT IT WILL NOT CONTAION APN OF YOUR COUNTRY
HOW TO GET YOUR OWN COUNTRY ROM AND GET YOUR WARRANTY BACK
FOLLOW THE STEPS
1) Get serial number of your phone BY REMOVING BATTERY AND LOOKING AT BACK PANEL OF PHONE.
2) Enter it in URL
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=<model_of_phone>&esn=<serial_number>
EXAMPLE​
FOR EXAMPLE IF MY MODEL IS LGP690 AND SERIAL NUMBER BELOW MY BATTERY IS 123456789012Q.
THIS WILL BE THE LINK
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=LGP690&esn=123456789012Q
5)Show page that you get in source-code view
COPY NUMBER WHICH IS INSIDE <ESN> </ESN> TAB
6)Enter this number to
Code:
csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<enter_esn_number_here>
7)Show page as source-code
COPY EVERYTHING BETWEEN THESE TABS
<sw_url></sw_url>
8)PASTE IT AND DOWNLOAD YOUR FIRMWARE
THANKS [email protected] FB:-SAME
SAY THANKS TO MY POST ​

karandeepdps said:
Bricked Phone Rooted Phone Need Original firmware to get warranty i am here to help you.
new link direct kdz download http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP690/AINDBK/V10e_00.01/V10E_00.01.kdz
FIRST OF ALL DOWNLOAD FACTORY ROM FROM THIS LINK:-
Code:
csmg.lgmobile.com:9002/swdata/WEBSW/LGP690/AINDBK/V10e_00/V10E_00.kdz
NOTE:- ABOVE LINK OF ROM IS INDIAN ROM ALTHOUGHT IT CONTAINS EVERY LANGUAGE BUT IT WILL NOT CONTAION APN OF YOUR COUNTRY
HOW TO GET YOUR OWN COUNTRY ROM AND GET YOUR WARRANTY BACK
FOLLOW THE STEPS
1) Get serial number of your phone BY REMOVING BATTERY AND LOOKING AT BACK PANEL OF PHONE.
2) Enter it in URL
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=<model_of_phone>&esn=<serial_number>
EXAMPLE​
FOR EXAMPLE IF MY MODEL IS LGP690 AND SERIAL NUMBER BELOW MY BATTERY IS 123456789012Q.
THIS WILL BE THE LINK
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=LGP690&esn=123456789012Q
5)Show page that you get in source-code view
COPY NUMBER WHICH IS INSIDE <ESN> </ESN> TAB
6)Enter this number to
Code:
csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<enter_esn_number_here>
7)Show page as source-code
COPY EVERYTHING BETWEEN THESE TABS
<sw_url></sw_url>
8)PASTE IT AND DOWNLOAD YOUR FIRMWARE
THANKS [email protected] FB:-SAME
SAY THANKS TO MY POST ​
Click to expand...
Click to collapse
ADD http :// BEFORE EVERY LINK

karandeepdps said:
ADD http :// BEFORE EVERY LINK
Click to expand...
Click to collapse
ADD HTTP :// BEFORE EVERY LINK
FOR EXAMPLE
http://forum.xda-developers.com/showthread.php?p=22225030#post22225030
DONT USE LIKE THIS
forum.xda-developers.com/showthread.php?p=22225030#post22225030

please my p698 got bricked and i have downloaded my firmware, how do i unbrick, steps please!

adiosa said:
please my p698 got bricked and i have downloaded my firmware, how do i unbrick, steps please!
Click to expand...
Click to collapse
Good day, may I ask if i can choose what firmware to be downloaded. Some Custom ROM i saw require V10c firmware while i got V10e and is already rooted. Can I flash CWM and cyanogenmod7.2 by jst even if im using V10e or I still have to downgrade to V10c?

yeah go ahead i have created a post how to root it check it out search root video.

adiosa said:
please my p698 got bricked and i have downloaded my firmware, how do i unbrick, steps please!
Click to expand...
Click to collapse
Go here
forum.xda-developers.com/showthread.php?t=1483192
Or pm me

karandeepdps said:
yeah go ahead i have created a post how to root it check it out search root video.
Click to expand...
Click to collapse
No no, you got me wrong. I am already rooted, the thing is can i Flash ClockworkMod Recovery and Custom ROMs like CM7.2, Dardroid 0 .3 in V10e Firmwares? Im confused because they require V10c and I got V10e.

karandeepdps said:
yeah go ahead i have created a post how to root it check it out search root video.
Click to expand...
Click to collapse
Hey Karan:
Have you rooted P698 with Cusom ROM? Which one did you use? I have been thinking to get this phone but have been holding back because I don't see any community support/custom rom for it. Any suggestion?

Pls do no flash cwm or rom 7.2 by jst on ur p698 bcause it will brick it bt can still b rcovered though!
Sent from my LG-P698 using XDA App

adiosa said:
Pls do no flash cwm or rom 7.2 by jst on ur p698 bcause it will brick it bt can still b rcovered though!
Sent from my LG-P698 using XDA App
Click to expand...
Click to collapse
Buddy, any idea/link how to root and flash custom rom on P698?

To root is a general thin. But to flash CWM rcovry and custm rom is still nt possible as no dvelopa has d interest of d device for now.
Sent from my LG-P698 using XDA App

ravisghosh said:
Hey Karan:
Have you rooted P698 with Cusom ROM? Which one did you use? I have been thinking to get this phone but have been holding back because I don't see any community support/custom rom for it. Any suggestion?
Click to expand...
Click to collapse
I cannot promise you it will work but you can flash p690 official kdz on your p698 and you can enjoy p690 mods.
Hope it helps.
Or donate if p698 i will make it for you

adiosa said:
Pls do no flash cwm or rom 7.2 by jst on ur p698 bcause it will brick it bt can still b rcovered though!
Sent from my LG-P698 using XDA App
Click to expand...
Click to collapse
I totally agree with you. DON'T DO CWM on P698. I brick it and replace one from shop.

adiosa said:
To root is a general thin. But to flash CWM rcovry and custm rom is still nt possible as no dvelopa has d interest of d device for now.
Sent from my LG-P698 using XDA App
Click to expand...
Click to collapse
CWM is OK now!

karandeepdps said:
Go here
forum.xda-developers.com/showthread.php?t=1483192
Click to expand...
Click to collapse
Pardon me but shouldn't this link also have http:// in front as you were suggested others to put that.. That will be useful I guess.. Thanks.

Thanks, worked perfectly for me. BTW the esn was just my IMEI number - could have jumped to the very last step with that.

Official Hong Kong ROM for P690?
do you guys have any Official Hong Kong ROM for LG P690? thanks

this is one of the most useful threads in xda :laugh:

Help, who can help me Delete the P698 "Hold key" on Call function. Can I delete the screen saver "112 Help Call" function also ? thankyou.

XXKPQ latest how to flash few files?

hello guys, i have i9003 2.3.6 XXKPQ it was rooted, until i reset phone. Now i wanna root back, i saw tutorial that i should reflash, but XXKPQ latest version so what to do now?

Are you trying to root it or trying to flash xxkpq??

i only wanna to root it

padekite said:
i only wanna to root it
Click to expand...
Click to collapse
If you want to root your phone use cf root bya amit.bagaria. Download it from android development section. Flash it via odin as PDA. This will root your device! ENJOY..

Ok gonna try

Report after flashing!

Ok rooted that, but in About phone, wont show that phone ROOT
its says its amit.bagaria here, its ok ?

padekite said:
Ok rooted that, but in About phone, wont show that phone ROOT
its says its amit.bagaria here, its ok ?
Click to expand...
Click to collapse
Yes
Cheers
Sent from my GT-i9003 powered by MIUI

rohan. said:
Press the thanks button atleast!!
Click to expand...
Click to collapse
Lol.. no need to force others bro

[Q]How to Root Galaxy 3 ICS [AKOP]

Hello XDA Users,
How i can root my galaxy 3?
I have the AKOP Build 2 ROM.
I only found instructions for other smartphones...
Gingerbread23

SuperOneClickRoote 2.1.1.on your phone usb debuging must be on.conect to Pc and prest start on the progam,it is easy and fast,I am on Froyo when i use it,so i the not know is it gona worke on gingerbread.

SoLoSaroman said:
SuperOneClickRoote 2.1.1.on your phone usb debuging must be on.conect to Pc and prest start on the progam,it is easy and fast,I am on Froyo when i use it,so i the not know is it gona worke on gingerbread.
Click to expand...
Click to collapse
I've tried the last version of SuperOneClick but it did not work.
I'll try the 2.1.1.

Gingerbread23 said:
Hello XDA Users,
How i can root my galaxy 3?
I have the AKOP Build 2 ROM.
I only found instructions for other smartphones...
Gingerbread23
Click to expand...
Click to collapse
Use the su fix at page 1, post 5

rubensollie said:
Use the su fix at page 1, post 5
Click to expand...
Click to collapse
Thank you
(I've Probably read too fast)

rubensollie said:
Use the su fix at page 1, post 5
Click to expand...
Click to collapse
Is that the gapps link? Or has the post been changed
[Edit]
Nvm, CWM with this file fixed super permissions.
http://forum.xda-developers.com/showpost.php?p=24007069&postcount=432

if you are on a custom rom... surely you are already rooted?

Ava.tar said:
if you are on a custom rom... surely you are already rooted?
Click to expand...
Click to collapse
On most roms its already done, but in this case it was another issue as you can read

Install fimg ics new.zip you can find in galaxy 3 general cm7a7/ics/cm9 kernel thread
Sent from my GT-I5800 using xda premium

[Q] Rooting Galaxy 3

Hey everyone, I want to know how to root my Galaxy 3 and whether I may lose my phone data after doing it ?
Please reply me...

Have u flashed a custom Rom

Mitali said:
Hey everyone, I want to know how to root my Galaxy 3 and whether I may lose my phone data after doing it ?
Please reply me...
Click to expand...
Click to collapse
If you are on android 2.1 download an apk (app) from google called z4root, open it on your phone and click on root.
If you are using android 2.2 download a program on your computer called superoneclick root, turn USB debugging on (on your phone), connect your USB and click on root.

Mitali said:
Hey everyone, I want to know how to root my Galaxy 3 and whether I may lose my phone data after doing it ?
Please reply me...
Click to expand...
Click to collapse
Plz do a search next time, when I did one on ur behalf it threw so many results anyway I will sort u out on this all the info can be found HERE Hope it helps you
Br
cliffrock

cliffrock said:
Plz do a search next time, when I did one on ur behalf it threw so many results anyway I will sort u out on this all the info can be found HERE Hope it helps you
Br
cliffrock
Click to expand...
Click to collapse
Sorry , U gave the link for Galaxy S3 and I want it for Galaxy 3..

MicroGeek said:
If you are on android 2.1 download an apk (app) from google called z4root, open it on your phone and click on root.
If you are using android 2.2 download a program on your computer called superoneclick root, turn USB debugging on (on your phone), connect your USB and click on root.
Click to expand...
Click to collapse
Thanks. I also want to know whether I may lose any data after rooting ?

Mitali said:
Thanks. I also want to know whether I may lose any data after rooting ?
Click to expand...
Click to collapse
No you wont
Sent from my GT-I5800 using xda app-developers app

[Q] [HELP] How to completely remove CHAINFIRE 3D from nerves of Galaxy tab2 p3100

Please help one day I installed chainfire3d on my galaxy tab2 p3100 running 4.1.1. But on reboot, it stucks on samsung logo.
There after, I flashed 4.1.1 using odin but, it does not able to play qny big games such as Asphalt7, NFS HP, NFS most wanted etc.
Please help........

Using root explorer goto data , search for chainsfire 3d and its component and dekete them with no mercy..
Or in settings clear its data and then uninstall/delete..
:thumbup::thumbup:
................................................................................................

Help to flash samsung p3100 with odin without enable usb debugging on
dailyuse17 said:
Please help one day I installed chainfire3d on my galaxy tab2 p3100 running 4.1.1. But on reboot, it stucks on samsung logo.
There after, I flashed 4.1.1 using odin but, it does not able to play qny big games such as Asphalt7, NFS HP, NFS most wanted etc.
Please help........
Click to expand...
Click to collapse
how u flash it without enable usb debugging can u help me i need help

Sanjay-Kumar said:
Using root explorer goto data , search for chainsfire 3d and its component and dekete them with no mercy..
Or in settings clear its data and then uninstall/delete..
:thumbup::thumbup:
................................................................................................
Click to expand...
Click to collapse
Any other way of removing the files? I'm stuck on the boot logo. I installed it not looking at the compatibility list. I have a SGS4 ATT with MF3

sincity said:
Any other way of removing the files? I'm stuck on the boot logo. I installed it not looking at the compatibility list. I have a SGS4 ATT with MF3
Click to expand...
Click to collapse
I faced the same prob once. but trust me bro, you should flash the sbf again. its the full solution of this.

imharshadpatel said:
I faced the same prob once. but trust me bro, you should flash the sbf again. its the full solution of this.
Click to expand...
Click to collapse
what is sbf again??.. my brain is fried from reading post after post... LoL. But if you are referring to stock ROM, yes I am waiting for someone to put it out. I'll tell you one thing.. I won't be the first to try it. hahaha

sincity said:
what is sbf again??.. my brain is fried from reading post after post... LoL. But if you are referring to stock ROM, yes I am waiting for someone to put it out. I'll tell you one thing.. I won't be the first to try it. hahaha
Click to expand...
Click to collapse
yes, I am talking about flashing the stock rom again. you can follow the link to unbrick your device :
phonerebel.com/how-to-unroot-unbrick-samsung-galaxy-s4-return-to-stock-att-sprint-t-mobile-verizon-more/

imharshadpatel said:
yes, I am talking about flashing the stock rom again. you can follow the link to unbrick your device :
phonerebel.com/how-to-unroot-unbrick-samsung-galaxy-s4-return-to-stock-att-sprint-t-mobile-verizon-more/
Click to expand...
Click to collapse
Hey bro.. I saw this but it didn't say anything about the build version.... I have the MF3 the latest and greatest. Meaning... from what I read, there is nothing out there at this present time. I don't want to try the MDL is it might just mess it up some more. So until it is confirmed that a certain flash will work for MF3... then I'll just wait. I gonna have to go caveman (no phone) for a couple of weeks/months... but its all good. Maybe it will humble me to not rely on portable technology... LOL!

sincity said:
Hey bro.. I saw this but it didn't say anything about the build version.... I have the MF3 the latest and greatest. Meaning... from what I read, there is nothing out there at this present time. I don't want to try the MDL is it might just mess it up some more. So until it is confirmed that a certain flash will work for MF3... then I'll just wait. I gonna have to go caveman (no phone) for a couple of weeks/months... but its all good. Maybe it will humble me to not rely on portable technology... LOL!
Click to expand...
Click to collapse
I searched too for its unbricking method. but didn't find any. waiting for a correct method is a good decision.

imharshadpatel said:
yes, I am talking about flashing the stock rom again. you can follow the link to unbrick your device :
phonerebel.com/how-to-unroot-unbrick-samsung-galaxy-s4-return-to-stock-att-sprint-t-mobile-verizon-more/
Click to expand...
Click to collapse
I got exactly what you have. So if you find a solution let me know.
---------- Post added at 09:18 PM ---------- Previous post was at 09:16 PM ----------
Otherwise... some ppl are telling me to jtag it.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s4-jtag-brick-repair/