My problem is that the Earphones produce a weird bug but others do not and work fine, Lol?
Doesnt Anyone face this annoying problem?????
Bump
NextGenGTR said:
Bump
Click to expand...
Click to collapse
My Bose QC 15 headphones had a problem with the iPhone-compatible cable, that includes a volume control and microphone.
Another "audio only" Bose cable that omits the volume control and microphone is also available off eBay for ~$10.
I asked Bose for an Android-compatible version with volume control and microphone, and they said they're "considering making one".
normally the headphone jack provides a link for headphones with e.g. microphones or buttons (to accept calls), which uses the same wires as for the audio.
the effect can be triggered by e.g. dirty connectors. so I once had a new pair of headphones and on the connector jack there was a bit of debris (glue or whatever left). they did also cause the phone to pause/play every now and then. so I cleaned them and then they did work without problems. also sometimes the connectors have to "grind in" until there is a good electrical connection.
however as it is steadily pausing/playing on your iPhone 5 headphones, I dont think theres an issue with the connection itself.
it might just be that the iPhone 5 headphones are trying to "communicate" with your phone, which it doesnt support and therefore is misinterpreting it as the start/stop commands. you cant do anything about it I guess.
(except dont buy apple products anymore )
Related
If you plug in a headset in the PDA, the microphone underneath the PDA is automaticly turned off (because it assumes you have a microphone on the headset).
Is it possible to prevent this?
If i use my own head-phones without mic, i have to unplug it if the phone rings, else i can talk!
Does anyone know?
GeeZuZz,
I use an fm radio cigarette adapter to play my music through my car stereo and when my phone rings I only have to answer it and my mike does not cut out, the caller can hear me fine and I hear them through the car speakers so I know this doesnt totally answer your question but using the headphone out on mine does not cut out the mike.
GeeZuZz,
I use an fm radio cigarette adapter to play my music through my car stereo and when my phone rings I only have to answer it and my mike does not cut out, the caller can hear me fine and I hear them through the car speakers so I know this doesnt totally answer your question but using the headphone out on mine does not cut out the mike.
Hmm... if i answere the phone with the headset plugged in, they can't hear me. But if i disconnect it, and put it slowly in, they can hear me... in other words, theres a software restriction.
Any way to override this? I'll probably never use a headset anyway (the bundled one was crap).
GeeZuZz,
It is a hardware issue. If you look at your headset's plug, you will notice that it is divided into 4 bands.
1. earth(common)
2. Right earpiece
3. left earpiece
4. mic
When inserted into the socket, the bands actually physically cut signals to the speakers and mic in the device (more like a switch).
Because your headphones stll have the same 3.5mm shape, it will also cut signal to the devices on your pda and transfers the signals to your headphones that has only 3 bands (none for mic obviously).
from my experience, i think its up to the jack that you plugged in to the device, if the jack is a stereo (has 3 black rings), the device will think that a mic is present, thus automatically disabling it. but if the jack is mono (2 ring) the mic will still be enable.
Three black rings(4 bands) mean stereo phones + mono mic. Two Black rings( 3 bands) mean stereo phones only.
Hmm... are there any way i can modify the jack, so that it will not disconnect the mic? Like putting some plastic on the piece of the jack where the mic is supposed to make the connection?
Sup all would anyone have the actual TRRS pinouts for the audio jack for the desire I would like to make a up a lead that will allow me to plug an ordinary pair of headphones in using a proper TRRS jack instead of a TRS jack. thanks. There are definately issues plugging in a headphone directly or maybe it is my unit faulty?
Edited, this topic will show you the best way to connect your headphones to your desire as some people will experiance problems with pluggin in normal 3.5 jack plug headphones, this is due to the desire using a trrs socket for the microphone instead of a trs socket that normal headphones use.
pretty sure it is:
tip - left audio
ring 1 (closest to tip) - right audio
ring 2 - data of some kind
shield - ground
Hope this helps
cheers for that, im having some peeps tell me that i can just plug in an ordinary pair of headphones into the phone without any ill effects, i am concerned that i will have a problem because headphones are trs jacks and the desire has the trrs 3.5 jack. can anyone confirm any details on this for me please
nah you can use a normal TRS 3.5mm jack with no problems. I guess that when you use a normal TRS jack then shield and ring 2 on the connector are both connected to shield on the jack so it adjusts the software accordingly. But yea, no problems.
cheers for that
edited, we have since discovered that this is not the case, please read the entire topic for the correct way to connect headphones to the desire.
standard 3,5 mm (TRS) headphones DO CAUSE ISSUES
Was about to resend my HTC Desire, because it randomly called, skipped music stopped the music, FM-radio freeze etc. from the moment I connected my high-end 3,5mm headphone (TRS type: 3 contacts).
No issues with the standard headset delivered with the HTC Desire (TRRS type: 3,5mm 4 contacts).
So, you might need a TRS -> TRRS adapter.
Anyone with other experiences???
Basically what I have found is that many of the normal headphones are not working correctly because it is a trrs socket that is used. To me this would mean that normal headphones shouldnt be used, I have tried various headphones but there are definately issues with them,
The main issue I was having was as you have said above and also the base wasnt right with them
I have since bought this
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130384433476&ssPageName=STRK:MEWNX:IT
which arrive today and when I am using this in conjunction with my headphones I now have the proper base to the set and NONE of the problems I was having when i was plugging them into the phone directly......... they just didnt sound right, now using griffin smarttalk this i can definately tell the difference now especially in the base, also this unit will lower the volume and allow you to make a call automatically with built in mike, clicking it twice doesnt skip the track suggested instead it will ring the last number dialled in the phone so a bonus actually to me
the straight adapters ie trrs to trs are very nearly the same price as this if not more expensive so i would recommend this all day long to you. At £9.75 delivered bargain m8, bought late evening on the 20th arrived this morning what more can i say, but if you are having issues it is definately in my eyes because of the difference in the trrs socket to the trs socket,
the base is fantastic on this phone now, before it was terrible, now i just need an equaliser to remove some of it
When you speak of "normal headphones", are you referring to simple 3.5 TRS headphones, or headphones with a mic ?
Cause if the majority of the headphones (without mic I mean) won't properly work with the Desire, it's a major flaw according to me.
I confirm: TRS (3 contacts, without mic) do not work...
...I tried 4 different 3,5mm stereo headsets (TRS type, 3 pole, without mic). NONE of them worked correctly (phenomenons as described above).
When you plug a 3 pole TRS headphone in the Desire 4 pole TRRS headphone output, a short circuit is generated between the first 2 internal contacts (seen from connector input: ground + control line).
I suspect that the Desire firmware cannot detect/handle this situation, and so it causes random actions (prev, next, call numbers, stop, play, ....)
I suspect that this issue could be solved with a firmware upgrade....
there is no way they would release hardware with a 3.5mm socket that you cant plug a 3.5mm jack into right? the firmware does detect when you use a TRS instead of a TRRS. You get a different icon on your notification bar for each of them. As ive said before my AKG's have worked perfectly so far and have shown none of the problems listed above.
This afternoon I quickly tested my Seinheiser PX100 headphones with a friend's desire and the Htc music player.
It worked flawlessly. Volume was good and it didn't play/pause/skipped tracks.
As I said it was a really quick test so I can't say for sure that everything's was okay.
Nonetheless apparently a lot of people experienced problems with numerous headphones. To me it's really a shame you can't even plug ANY 3.5mm jack headphones with the desire ...
I hope a software update could fix this.
I also had this problem when connecting my Desire to my car radio using an standard 3.5mm AUX cable. Will this cable solve my problem or will my car radio not be able to recognize a 4 pole cable?
http://cgi.ebay.nl/3-5mm-Male-TRRS-...erAccess_RL&hash=item5d28c530c1#ht_1252wt_939
I think this might be an issue of certain cables not making a full connection due to the shape of the case surrounding the socket. I had no problems with my headphones, sound was good and loud enough although I could see how it might not be loud enough for some.
I did start having issues when I plugged the aux lead in my car into the phone. The lead has a large shroud that obstructed the plug from being plugged all the way in. This gave the same problems as described in other posts, skipping tracks and also crashing the music software at one point.
I replaced the lead with another that had a better fit and the problems went away but I did notice when I leaned against the lead while it was playing music in my car it started skipping track again.
I wonder what HTC have to say about this....
DHel01 said:
I also had this problem when connecting my Desire to my car radio using an standard 3.5mm AUX cable. Will this cable solve my problem or will my car radio not be able to recognize a 4 pole cable?
http://cgi.ebay.nl/3-5mm-Male-TRRS-...erAccess_RL&hash=item5d28c530c1#ht_1252wt_939
Click to expand...
Click to collapse
I solved those problems with this lead- i dont think the one your showing will work for you
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220593400305
they come from china etc however only 5 days to arrive from ordering.
and I now enjoy trouble free music. I also have ordered the Griffin Smart Talk so i can listen to my headphones and be able to answer the phone as well however I didnt want to use it for plugging into a car stereo etc etc so i wanted a straight lead conversion.
Just a quick warning the first lead i ordered from this person was faulty, however i had also ordered 3 other leads from the same person as an after thought which were all perfect.. as they are only pennies it is worth ordering one or two spare for redundancy purposes. I decided to order 3 as backups more in case i broke one and the person stopped selling them etc etc
These leads will allow you to connect the htc to any other source including external speakers which didnt work when putting them in normally but did work when i used this cable in conjunction with it.
this cable is a trrs to trs jack plug and is used to convert a 4 pin socket to a 3 pin socket jack plug.
I've been using a pair of JVC Gummy Air on my Desire since I got it, not a single problem.
Re: TRRS Pinouts for Desire
I've used some headphones, and 2 different aux connector for the cars and all 3 work absolutely perfectly. No issues at all.
Sent from my HTC Desire
I have been using my Yuin PK3 earbuds for music since I got my Desire and it has been working without any problems.
TheOriginalKi said:
I've been using a pair of JVC Gummy Air on my Desire since I got it, not a single problem.
Click to expand...
Click to collapse
Oh yeah and I've also hooked it into the tv via a standard audio cable!
Not sure what you guys are talking about but my AIAIAI headset works fine with the Desire
Mic working too!
aiaiai.dk/headsets/tracks-headsets/tracks-headset-black.html
^those
Sennheiser PXC 250 with NR, no problems
I have been researching online about using car aux-in cable for making phone calls.
I heard that some phones work and some do not. In those cases, when it doesn't work, it means that the person in the phone cannot hear what you say, because by default the mic is muted when something is plugged in to the jack.
With HTC Sensation, does this happen? Is the phone mic muted when a headset/aux cable is plugged in to the phone? If yes, is there any workaround? What is the general solution to make phone calls via aux cable?
I heard that some people might use the griffin cable with mic, but since my aux port is located where the shifter is, I am not sure how the quality would be. Any idea?
Thanks
absolution8 said:
I have been researching online about using car aux-in cable for making phone calls.
I heard that some phones work and some do not. In those cases, when it doesn't work, it means that the person in the phone cannot hear what you say, because by default the mic is muted when something is plugged in to the jack.
With HTC Sensation, does this happen? Is the phone mic muted when a headset/aux cable is plugged in to the phone? If yes, is there any workaround? What is the general solution to make phone calls via aux cable?
I heard that some people might use the griffin cable with mic, but since my aux port is located where the shifter is, I am not sure how the quality would be. Any idea?
Thanks
Click to expand...
Click to collapse
well, i hope this answers ur question
i have made calls/received calls via aux (when im listening to music in da car n get a phone call i dont uplug it, just answer)
i talk thru the mic normally and i hear the other person from tha car speakers.
so i guess the mic is not muted
From previous experience - though not with Sensation, as I'm all blue-tooth now, the following was true
If you plug in a normal 3.5mm TRS jack (stereo headphone / line-in / etc) the phone detects it as headphones and not headset, so the device realised there was no "in-line" mic, and used the phone's microphone itself.
A better option (which I did) was to fashion my own lead - using another HTC headset, but removing the two earphones, and soldering the cables to an in-line socket. This worked well, because I had a microphone clipped to me, with remote control for music (don't want to touch the phone when driving now, do we!!) and the stereo audio feed back to the car speakers. Cost me about £3 in total, including the second headset.
I would imagine this to be the same for the Sensation too, as all these sockets have various detection mechanisms, to make the right things happen, depending on what you connect.
Good luck, and safe driving!
On my tablet I always get a slight static hiss/background noise during and a couple seconds after the tablet plays any sound.
This seems very odd to me since it's not affected by how loud the volume is (as long as sound is on, not at 0).
I don't have this on any other outputs (HDMI/BT/USB OTG/build-in speakers, all fine)
Every headset/speaker I use outputs this from cheapo Samsung in-ears to a quite expensive 2.1 setup.
I'm used to having a bit of noise at the highest volume levels (which for ex. my Note 3 has) and consider this normal.
But this is very annoying, especially when navigating the UI as I always have to endure this hiss for a couple of seconds.
I'm not sure if it's a hard or software issue, since normally static hiss always occured to me on lower-end devices with higher volume, and if it were a software issue should it not also do this on all outputs (including digital).
I haven't come across anyone with a similar issue.
Yep, this happens for me as well on my LTE version. It also happened on the Nexus 7 2013. The noise is from interference from the other board components in close proximity to the audio chip.
jaredmorgs said:
Yep, this happens for me as well on my LTE version. It also happened on the Nexus 7 2013. The noise is from interference from the other board components in close proximity to the audio chip.
Click to expand...
Click to collapse
Yes, I also have the LTE version.
Bleh, that's no fun and really annoying. I have never had anything from a reputable brand do this.
The next test would be to see if it does it through USB Audio or Bluetooth Audio. I have a Microsoft LifeChat 3000 headset that I have successfully connected to the tablet, which doesn't seem to have the hiss. It could be due to the impedance of the speakers of this headphone compared with my Shure SE425 IEMs that I notice it more. I also use Tri-flange tips on my IEMs which makes everything more pronounced.
jaredmorgs said:
The next test would be to see if it does it through USB Audio or Bluetooth Audio. I have a Microsoft LifeChat 3000 headset that I have successfully connected to the tablet, which doesn't seem to have the hiss. It could be due to the impedance of the speakers of this headphone compared with my Shure SE425 IEMs that I notice it more. I also use Tri-flange tips on my IEMs which makes everything more pronounced.
Click to expand...
Click to collapse
I did, My USB headset doesn't have this issue (plugged into the shield with a USB OTG cable), my 3.5 mm headphones and cheapo IEMs don't have the issue when plugged into a Sony SBH50 connected to the Shield (via Bluetooth), but they do have the issue when directly plugged into the Shield. Meh.
So that proves that it is the shielding on the 3.5mm jack.
Unfortunately, that's case closed. If it's any consolation, you get used to it after a while.
An update:
I tested with my PC's line-in input, and when I put it in any 24bit mode sound is crystal clear 24/7, I don't get any issues.
mic-in sounds garbage but that's to be expected (I can hear the tablet's internals cause distortion all the time.), it also doesn't always get detected by the tablet.
Is this of the lower impedance that the static noise gets filtered out? I'm not an audio expert.
Hi dear friends,
I'm having a weird issue with wired (jack) headphones during calls : I can hear my own microphone !
For example during a call, if I'm in windy conditions, I can hear the wind.
During such scenarios, my phone is in a pocket or in a bag, so the mic I hear is the one on the headphone's cable.
This problem arises with either the headphones provided with the Pixel, or with any other wired headphones kit (I've tested with a Samsung).
On headphones with volume control, I can even hear a loud sound when volume up or down ...
And this issue is here out of the box, without any APP installed.
My phone has already been replaced by Google support, but the issue is still there one the new one.
Does any of you Pixel 3a owners, have seen such an issue with its phone ?
This is normal operation.
If you are wondering why the noise cancellation isn't working better, you have to understand how it works. It compares the audio from the mic on the headphone wire with the audio from a mic(s) on the phone. Anything that both mics pick up is cancelled by the noise cancellation software because it is considered an "outside noise". But anything picked up on just the wired mic is considered part of the conversation and won't be cancelled out. That means if your phone is in your pocket and it isn't getting the same wind noise (for example), then the phone will not cancel out that audio because it's only being picked up by the wired mic and not both mics.
Hopefully that helps. If you want wind noise to be cancelled out, try holding your phone in your hand and see if that helps. But the wind noise may not be picked up even then depending on which way the wind is blowing vs what orientation your phone is being held in, so you might have to hold the phone a couple of different ways to find one that works the best at that time.
sic0048 said:
This is normal operation.
If you are wondering why the noise cancellation isn't working better, you have to understand how it works .....
Click to expand...
Click to collapse
Thanks for your reply
My guess is that this issue is not related to noise cancellation.
1) I've indeed mention that, in my test scenario, my phone was in my pocket. But I can remember of several times I was holding the phone in my hand, or phone was lying on a table, and even then the sound captured by both mics was audible by me.
2) When I'm in call with another person, and I'm hearing the wind in my own mic, the other person does NOT hear the wind.
Isn't anyone here using jack wired headphones ?