i have set all audio 's media level from 0-14 at value 255 and volume 160 . how to reset to default?
Related
well i just brought these today and i conneted them to my htc vox and from wmp the volume sounds relly low.... is there any registy tweaks or programs that will boost my sound?
I have the Jabra BT3030 headset and it sounds awesome.
Have you tried the bluetooth registry tweaks?
here they are:
ADD/CHANGE the following values from the registry at HKLM\Software\Microsoft\Bluetooth\A2DP\Settings :
Name: UseJointStereo
Value (DWORD): 1
REMOVE the following values from the registry at HKLM\Software\Microsoft\Bluetooth\A2DP\Settings if they are present:
- BitPool
- MaxSupportedBitPool
ADD the following value to the registry at HKLM\Software\Microsoft\Bluetooth\A2DP\Settings:
Name: SampleRate
Value (DWORD): 48000 (decimal)
I hope this will improve your experience.
have fun.
prajith
those settings NOT change volume level
Hypola
try to:
-set system volume in 5 (high). In phone settings, not WMP of course
-try to use another type of earphones. Like Sony MDR-EX 90 (or Koss the plug)
-use CorePlayer. In it settings use volume boost option in audio page
Edit:
As nir36 move the contents of this thread
Perhaps it can be deleted, there is no point to have it anymore...
Added In-Call Volume and Ring volume
Aegishua said:
Sorry if this has already been posted but there are a couple of things that are worth outlining to most users.. for example there are registry entries that allow you to change the volume and increase it significantly beyond windows actually supports and there are various other edits.. but one edit i really would like is to disable the Incoming Call Bubble..(haven't found a solution for it yet) but i thought i'd just provide everyone else with what i've found so far. (I take no credit for these registry edits)
Volume Edits
HKCU\ControlPanel\Volume\
DWORD - Ringer
(HEX)Increase it to 0x#<change it to 5 or higher> to increase it to its maximum volume. - Only tested on the Atom Life
(DEC)Increase it to over 5 to increase the volume
DWORD - Volume
Same as Ringer DWORD
In Call Edits
REMOVE SOUNDS WHEN ADJUSTING VOLUME INCALL
HKCU\ControlPanel\Sounds\StandardIncallVolume
HKCU\ControlPanel\Sounds\QuietestIncallVolume
HKCU\ControlPanel\Sounds\LoudestIncallVolume
STRING - Script
Remove the 'p' in the script strings to remove the noises while in a call. This makes the volume increase smoother and removes the annoying noises.
INCREASE INCALL VOLUME
HKCU\Control Panel\SoundCategories\InCall
DWORD - InitVol
Defaults to around 2 - 5, Increase this to 5 or Higher
Ringtone Edits
HKCU\ControlPanel\Sounds\Ringtone0
STRING - Script
RINGTONE VOLUME
HKCU\Control Panel\SoundCategories\Ring
DWORD - InitVol
Defaults to around 2 - 5, Increase this to 5 or Higher
Notifications Edits
HKCU\ControlPanel\Notifications
This works for any Script DWORDs in most if not all of those strings.
EG. To Show the icon on the taskbar, vibrate and play the sound selected
Reg: HKCU\ControlPanel\Notifications\Phone\Options
HEX Value - 0x3
DEC Value - 3
PS: If this is already done.. Close the thread or PM me and i'll delete it.
Click to expand...
Click to collapse
What should I edit to increase the system sound volume (i.e the volume of music playing)
Also, please tell me how much to increase so that I do NOT damage my device in any case.
Thanks
Hope this can go in the guides thread.
nir36 said:
Hope this can go in the guides thread.
Click to expand...
Click to collapse
I read the guide, but there's a confusion.
What should I modify to increase the volume of the music playing, and also by what value should I increase so as NOT to damage the device.
THanks
lamborg said:
I read the guide, but there's a confusion.
What should I modify to increase the volume of the music playing, and also by what value should I increase so as NOT to damage the device.
THanks
Click to expand...
Click to collapse
Myself RAWR said:
HKCU\ControlPanel\Volume\
DWORD - Ringer
(HEX)Increase it to 0x#<change it to 5 or higher> to increase it to its maximum volume. - Only tested on the Atom Life
(DEC)Increase it to over 5 to increase the volume
DWORD - Volume
Same as Ringer DWORD
Click to expand...
Click to collapse
Okay essentially, you open the registry editor on your phone and then make your way to the Volume String. from there you'll see a number of DWORDS and what not. Select Volume and edit the value. Change it to something like 5 or higher than the value that was already there. Soft reset after that
Alternatively you can install the SRS WOW HD driver if your phone supports it (most phones do). Download it Here
ok, the guide was moved to the GUIDES thread... post 25.
Hello All, I am having a heck of time trying to figure out how to change the default value in the headset value while in service mode.
I first type *#*#197328640#*#*
then select #5 Audio
then select #2 Headset
then key imput 100
It just adds that number to the default value of 52 and makes it 52100. How do I change the default value? Please help! My phone has been rooted and android version 2.3.5
Thanks
Dave
otterjock said:
Hello All, I am having a heck of time trying to figure out how to change the default value in the headset value while in service mode.
I first type *#*#197328640#*#*
then select #5 Audio
then select #2 Headset
then key imput 100
It just adds that number to the default value of 52 and makes it 52100. How do I change the default value? Please help! My phone has been rooted and android version 2.3.5
Thanks
Dave
Click to expand...
Click to collapse
It could have something to do with the fact that it says "menu key not exist" when you get to these values, it's possible they cannot be changed here.
Hey guys,
Im using stock rom of JB V 4.1.1.... I messed up with the engineering mode in headset n loud speaker, could anyone please help me with the default values for the same ...would really appreciate it, the main problem here is the headset volume at 0 stays nil(no sound) and the volume from 1-7 remains constant there is no diminishing of sound or increase in anyway.....
[email protected] said:
Hey guys,
Im using stock rom of JB V 4.1.1.... I messed up with the engineering mode in headset n loud speaker, could anyone please help me with the default values for the same ...would really appreciate it, the main problem here is the headset volume at 0 stays nil(no sound) and the volume from 1-7 remains constant there is no diminishing of sound or increase in anyway.....
Click to expand...
Click to collapse
I think the default is 128-150 for sound. Not sure.
Normal Mode
FIR 0
Type - Sip
Level 0
Valve - 108
Max Vol. - 128 (make it 150)
Headset Mode
FIR 0
Type - Sip
Level 0
Valve - 108
Max Vol. - 148
LDspeaker Mode
FIR 0
Type - Ring
Level 0
Valve - 140
Max Vol. - 128 (Make it 150)
1. engineer mode --> engineer mode (mtk) --> Hardware Testing tab --> Audio --> Normal Mode
2. select [sph]
3. changed:
lvl 6 = 155 (was 136)
lvl 5 = 140 (was 124)
lvl 4 = 125 (was 112)
lvl 3 = 110 (was 100)
lvl 2 = 100 (was 88)
lvl 1 = 86 (was 76)
lvl 0 = 75 (was 64)
4. Back to Speech Enhancement > changed Common Parametre to Normal Mode
5. Selected parametre 7, set to 96 (was 64)
6. selected parametre 6, set to 300 (was 400), supposedly adds a bit more bass to the audio
done !!!
significant volume boost during calls and it sounds more natural
My engineering mode in audio doesn't have normal mode unless you mean system. In audio enhancements is the same. In audio it doesn't have sph in any of the drop down menue. I tried these settings and it will not accept them