[Q] SHV-e120l Can't boot into recovery mode !! - General Questions and Answers

Hello guys. I'm totally newbie to this forum and to andoid devices. I got SGS2 HD LTE SHV-e120l
(My english is so bad and sorry for that.)
- I have been following this guide http://forum.xda-developers.com/galaxy-s2/development-hd/rom-cm11-e120l-s-t2573149 to flash this rom.
- I don't know if i did something that i shouldn't have but when i was wiping the cache my device rebooted.
- And it passed the word SAMSUNG and then it stucked on the word Samsung GALAXY S II HD LTE with the blue line filled.
- And I pulled the battery, tried to reboot but still the same stucking thing.
- I tried to boot into Recovery mode. but still same result.
- And I tried to boot into Download mode, actually it worked.
- I tried to flash the CWM using Odin so many times. It says PASS! but my device still doesn't start.
I have searched for right way to resolve but i couldn't find.
Hope you guys will help me.

Related

[Q] Galaxy mini S5570-Can't boot to recovery after flashing ClockWorkMod recovery

Hi,
I've recently flashed ClockWorkMod Recovery using Odin to my Samsung Galaxy mini S5570 device,
the opertion was succesfull (Odin said PASS), but now when I try to boot into Recovery (pressing Middle button and power button) the device just get stuck in the Samsung screen (the first screen you see when you regulary power on your device).
Will be glad for some help!
*Any Ideas how to fix this problem? or why does it occur?
1) Will HardReset/FactoryReset the phone will uninstall ClockWorkMod Recovery?
2) Do I need to ROOT my device prior to the flashing of ClockWorkMod Recovery with ODIN?
3) Can I remove/uninstall the ClockWorkMod Recovery?
Thanks advanced for your help!
Same issue
Hello,
I've got exactly the same issue and do not find any answer
Thank you for your help!
Etienne
Same here..
Same problem here, It just shows the samsung logo and that's all, I can't finish installing firmware
Stuck with first screen
I am also stuck with the opening screen. Prior being bricked the phone went through the washing machine. Board was cleaned. It still has carrier SIM lock on it. I am digging the forum for imput, but no luck so far.
With USB clable plugged in it shows only a small phone and computer icon with yellow triangle+exclamation mark on the dotted line between them. Cannot load the hard reset menu. The Download menu with big triangle comes up, that showed at least the display is working.
Odin 4.38 was able to flash the Clockworkmod, but no Gingerbread or some other update. The time runs happily but MIBIB will not load, and i must turn everything off.
I have the same issue. Wondering if there is a fix for this. Can boot into download mode but not Clockworkmod Recovery. Stuck at Samsung screen.
Okay well I found a fix!
I was trying to update CWM Recovery via Odin when I still had Froyo installed on the device. Classic rookie error. You need gingerbread to use the latest CWM. All I had to do was install an official samsung gingerbread ROM via Odin and then I was able to re-install CWM sucessfully. Now running CM9 on my Galaxy Mini and everything is great, very snappy (few bugs though)

P6200 bricked - but sometimes boots and CWM OK?

Hi guys,
Really sorry to ask about this but tearing my hair out!
I have a P6200 UK model. I installed CWM v6.0.1.0 and it worked fine. The intention was to install Galaxy ROM HD (build #06), so I downloaded it, put it on my SD card, and installed from CWM recovery. The install got stuck on "Flashing boot" - so after around 15 mins I reset it.
It went into a boot loop on the initial Samsung logo. Luckily I'd previously re-flashed stock HC with Odin (to cure a dead Wifi problem caused by, I think, an errant install of Busybox) so I did this again, rebooted, and the system came up, text started scrolling up the screen, followed by a red error message (see picture) and a reboot. I was then once again stuck on the initial Samsung Tab 7.0 Plus log. I repeated the process and it didn't even get past the Samsung logo.
So I thought I'd try the newly released ICS Rom (GT-P6200_ATO_P6200XXLQ1_P6200OXALQ1) - this seemed to install OK, then half booted, did some text type installation stuff with the blue Android, then rebooted again, finally getting stuck on the Samsung logo with blue pulsating behind it. It never gets any further than that.
I tried flashing HC back - same result as earlier. I can also reflash CWM and sometimes it works, sometimes it doesn't. It seems I've run out of options.
So - question is - where (if anywhere!) can I go from here?
Help greatly appreciated, many thanks!
have you tried a system wipe in cwm? if not do a system wipe and reflash HC using odin.. same thing happen to me 2 days ago.. I think something is up with HD rom

[Q] HELP! International Version Samsung S3 won't boot up

Hello guys, my apology if I open this thread somewhere. I just couldn't find a perfect thread to post about these issues. My International Version Samsung Galaxy S3 won't boot up after I root it with ODIN. The rooting was fine as I was able to download some apps in google play for root users. Eventually, I restarted my phone & there you go! It didn't boot up, all I see was a samsung logo & then my phone dead again. I got into recovery mode(home + power + ctrl up), i tried 'wipe data/reset factory" but still to no avail after I reboot my device, it will take me to the start up set-up of samsung (just like when you unbox your phone, the set up message shown when you 1st turn on your phone) but I stucked on the language, after I select language, my phone hangs & dead again. I can get into download mode too (home+power+cntrl dwn) but it will just stuck me to "downloading... do not turn off target'. Can somebody help me with this? I read about flashing & stuff but I just dunno how to do it though I tried but using SGS3 toolkit but again I am stuch at waiting for debugging... ANy help is appreciated.. Thanks

[Q] it keeps loading screen cycle is repeated.

Hi guys. I trying to flash, was doing well, everything perfect, but when processing a rom to another screen / logo TWRP recovery loop, ie flashing again and again one fell again and again. I tried on several computers re-flash TWRP both as the CWM with Odin, but the result is the same.
For when flashing the CWM recovery samsung logo appears but then the black screen with no remains. I have also tried with the PARAM and WIPE odin file and also without result. My version is samsung galaxy s3 mini i8190L. I welcome any comments.
I have tried many things, I read something flashing by adb but it is not very clear.
Anyone who knows anything for my one movable working normally again and exit the loop ?.
Thanks in advance to anyone who can tell me.
PS: sorry for the bad english

GT-N8010 stuck in boot logo and can't enter recovery

Hi everybody, I´m kinda new in this and I´m really sad because my tablet won't boot anymore :crying:, I have a samsung galaxy 10.1 gt-n8010 wich I've been using for like a 2 years or so, everything was perfect(I was using omega rom v2.1 for more than a year!!!) until last week, I was recharging the battery of my tablet it was turned on , then later that day I realized that the tablet was on the boot logo (samsung galaxy 10.1), I tried to restart it but same thing happend, it got stuck at the boot logo, and when I tried to enter the recovery menu, only the letters teamwin are shown, but after 2-3 seconds it reboots and again got stuck at the logo that's how the pain and suffering started :crying::crying:
I´ve tried so many things to revive my tablet, wich I will list here;
I´ve flashed it (4.1.2 and 4.4.2 both stock roms and even the custom omega rom wich was the one I was using) using several versions of odin (v3.07 - v1.85 - v3.10.6) and odin says it passed succesfully, but then the problem remains
I´ve removed the battery and leave it just like that all day long, even I tried to turned it on without the battery (with direct power), but nothing it doesn't even turn on at all, no luck either.
I've flashed with some custom recoverys, (cwm,twrp), and again, no recovery.
I've tried to flashed it with several versions of pit files (I´m desperate and mad by now !!!) using several versions of roms and NOTHING even a file for a bootloader and again, no recovery, no boot no nothing it's just like if it wasn't flashing anything at all.
I'm sad, desperate, mad, angry, I wan´t my precious back !!!
Does anybody knows how to revive it ???
I have searched and searched and I've found nothing
Thanks in advance.
i have the same problem with my gt-n8000 :S:S:S:S someone help pls :S:S:S
Kindly get debrick.img for your phone to revive again
Even I have bricked my note 10.1 and past 1 week im searching solution for it.
Got this that is debrick.img which can be created by unbricked device only and can be used via sdcard to revive your bricked phone.
Can check this post - http://forum.xda-developers.com/showthread.php?t=2626147
Please help me also if someone can create a debrick.img for note 10.1 N8000 too.

Categories

Resources