Hi
This is a question to Mikyno,
Have installed gnabo rom v1 on my note 8010, now can I flash v2 without wipe data?
Thanks for your support and great job with the leaked rom
Aborg69 said:
Hi
This is a question to Mikyno,
Have installed gnabo rom v1 on my note 8010, now can I flash v2 without wipe data?
Thanks for your support and great job with the leaked rom
Click to expand...
Click to collapse
I did just this yesterday and it went fine, just wipe cache and dalvik prior to installing. Some say wipe again afterwards but I did not and have no issues.
And back everything up first just in case it all goes tits up!
Hope that helps.
rytterbomb said:
I did just this yesterday and it went fine, just wipe cache and dalvik prior to installing. Some say wipe again afterwards but I did not and have no issues.
And back everything up first just in case it all goes tits up!
Hope that helps.
Click to expand...
Click to collapse
Thanks a lot, just flash v2 and it work fine,
Again the fix for enable writing on ext sd card and modify the device name on buil.prop to remove the banner on poloaris office app
Thanks again
Gnabo v3 was just released
Sent from my SM-T320 using Tapatalk
Gnabo Rom V3 - Wi-Fi on N8000
Sorry, moved questions to the new thread, 'cause they were about Gnabo V3, not V2
Related
I already have CyanogenMod 7 (RC4) on my phone, but now that there is a stable release I would like to get it. My question is: can I install it over RC4 without having to wipe data and cache?
Save your Files and do a FullWipe, it's recommend and a must i think.
You are on the Safty-Side when you do that
I just flashed the final release over a daily build, the thread said so, and it works fine.
You don't have to wipe, only if there is a problem. I have been updating since around nightly 29 and haven't wiped once and that includes all the rc's and the new stable but make sure you backup just in case.
Sent from my HTC Desire using XDA Premium App
Kstarz said:
You don't have to wipe, only if there is a problem. I have been updating since around nightly 29 and haven't wiped once and that includes all the rc's and the new stable but make sure you backup just in case.
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
+1
Works fine for me. Just triple wiped cache and delvik cache and everything is smooth so far.
Sent from my Incredible using XDA App
Please can anyone said how to add some other language in nightly build? There is my language in elder builds but now it was removed from last nightly.
Worked just fine for me.
I find that I can't add more language without recompiling ROM. Wrote to author with this problem.
Please, somebody, tell me how to disable annoying vibration then i unlock my phone with slider. Can't find settings for this. I'm using CyanogenMod V7.0.2 on wildfire.
Solved: just disable lock screen)
I find this funny because the day after you posted this thread the new version of V7.0.3 came out look 5 May 2011! Im sure you have already found out this information out for youself but this will answer your question just look here ok -
http://forum.cyanogenmod.com/topic/20132-cyanogenmod-7-for-the-htc-wildfire-v703-5-may-2011/
Hope this helps
Main differences with oxygen and Bluetooth FTP profile
I'm a proud user of oxygen, but one thing that does not like me is that I need a new APP for Bluetooth file transfers (medieval...).
Does CM suppport this stock?
Regards,
mgmate said:
I'm a proud user of oxygen, but one thing that does not like me is that I need a new APP for Bluetooth file transfers (medieval...).
Does CM suppport this stock?
Regards,
Click to expand...
Click to collapse
What do you mean? can you u use that app with CM7???? If thats what you were asking? the answer is yes!
PLEASE NOTE IF YOU DO NOT HAVE A HTC DESIRE THE LINKS BELOW ARE NOT FOR YOU GO HERE & FIND YOUR PHONE & THEN FOLLOW THE GUIDE BELOW INSTEAD!
http://forum.cyanogenmod.com/
Just if you are coming from another rom make sure you do a full wipe & wipe the dev cache before you flash the Cyanogen rom! If you already run a cyanogen rom on your phone now dont bother doing a wipe just flash the new rom! i would install clockwork mode 3.*.*.* with Cyanogen 7.0.3 ( or you will get stuck on a bootloop after installing! ) go here for it - http://forum.cyanogenmod.com/topic/20122-cyanogenmod-7-for-the-htc-desire-hd-v703-5-may-2011/ or if you dont wanna install the latest stable version ( & i dont know why you wouldnt want to ) or go here & install an older version the Cyanogen 6.1.3 from here - http://forum.cyanogenmod.com/topic/11011-cyanogenmod-61-for-desire-hd-v613-01012011/ ( if you want 6.1.3 version make sure you use clockwork version 2.*.*.* or you will get stuck on a bootloop after installing! )
Hope this helps
hello dear all
i flashed your great rom on my galaxy3, it realy runs smooth and good, i find it the best i tried!
there's 1 problem, when i reboot the phone it goed back to the factory settings so everything is gone (apps i installed, again the original wallpaper,original settings,etc.)
How come , because it's a beta version?
and i can nor unzip the 'FOR_LAUNCHER.zip'
Jaafar U.K. said:
hello dear all
i flashed your great rom on my galaxy3, it realy runs smooth and good, i find it the best i tried!
there's 1 problem, when i reboot the phone it goed back to the factory settings so everything is gone (apps i installed, again the original wallpaper,original settings,etc.)
How come , because it's a beta version?
and i can nor unzip the 'FOR_LAUNCHER.zip'
Click to expand...
Click to collapse
SOLVED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SOLVED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I had Kyrillos 9.3 with 2.2.2 g3mod kernel than I flashed this v3.0 using multiboot. It's very smooth, works perfect... There is only one thing, the camera is black/white but otherwise everything works smooth!!
so now i have android 2.3.5 on my galaxy 3 with all these nice and new features!
thanks developers!
JUST MIX THE KYRILLOS ROM AND THAN GO IN RECOVERY=MULTIBOOT=CHANGE ROM=G3ROM(=the system.img should be in there=in ur sdcard)=once finished=GO BACK=FACTORY WIPE =REBOOT = AND VOILA WORKS SMOOTH AND SAVES EVERYTHING IN REBOOT MODE= BEFORE NOT!!!!!
I believe it had something to do with dalvik cache.. Have you tried wiping it from CWM?
Dympy.
Sent from my GT-I5800 using xda premium
yes i did, it's still the same now...
Black and white camera preview is a known bug
Sent from my GT-i5801 using XDA App
I have flashed many firmwares (including my friends phones). While flashing certain ROMs, "Wipe data" seems to be mandatory (like in Cyanogen) while on some other, its only Optional (though may be recommended). I can understand doing "Wipe data/Cache" will clear out content of previous ROM so that the new ROM will run smoothly without any lag. But I like to know in which cases, we need to mandatorily wipe data before/after flashing new ROM.
selva.simple said:
I have flashed many firmwares (including my friends phones). While flashing certain ROMs, "Wipe data" seems to be mandatory (like in Cyanogen) while on some other, its only Optional (though may be recommended). I can understand doing "Wipe data/Cache" will clear out content of previous ROM so that the new ROM will run smoothly without any lag. But I like to know in which cases, we need to mandatorily wipe data before/after flashing new ROM.
Click to expand...
Click to collapse
If you are upgrading the system ie: upgrading from 2.3.5 to 2.3.6 or GB to ICS then its must, if you are moving from 2.3.6 to 2.3.6 then its optional...
mj.vikram said:
If you are upgrading the system ie: upgrading from 2.3.5 to 2.3.6 or GB to ICS then its must, if you are moving from 2.3.6 to 2.3.6 then its optional...
Click to expand...
Click to collapse
Oh..ok. Got it. Thanks Vikram :good:
i disagree a bit
mj.vikram said:
If you are upgrading the system ie: upgrading from 2.3.5 to 2.3.6 or GB to ICS then its must, if you are moving from 2.3.6 to 2.3.6 then its optional...
Click to expand...
Click to collapse
but i upgraded my galaxy gio from 2.3.7 to 4.0 (CM7 to CM9) without wiping data. on maclaw.pl the instructions were given that as you are going from cyanogenmod to cyanogenmod so wiping data is not necessary... So how would you explain this. i ll be waiting for reply. thank u
mrq001 said:
but i upgraded my galaxy gio from 2.3.7 to 4.0 (CM7 to CM9) without wiping data. on maclaw.pl the instructions were given that as you are going from cyanogenmod to cyanogenmod so wiping data is not necessary... So how would you explain this. i ll be waiting for reply. thank u
Click to expand...
Click to collapse
May be cm has its own scripts that wipes the data by itself while installin it
Sent from my GT-I9103 using Tapatalk 2
mrq001 said:
but i upgraded my galaxy gio from 2.3.7 to 4.0 (CM7 to CM9) without wiping data. on maclaw.pl the instructions were given that as you are going from cyanogenmod to cyanogenmod so wiping data is not necessary... So how would you explain this. i ll be waiting for reply. thank u
Click to expand...
Click to collapse
can you provide the link of the thread for us where its written so...
vipul12389mehta said:
May be cm has its own scripts that wipes the data by itself while installin it
Click to expand...
Click to collapse
No Buddy i don't think so, Because even "Elite Recognized Developer Codeworkx" will ask to wipe data even if you are upgrading CM9 to CM10 ....
Hi
I flashed RemICS v1.7 by Chinmay7d on my i9003. I got my phone up and running and RemICS is indeed very fine. The problem is that my phone does not have all the apps installed as it mentioned in the ROM such as Solid Explorer, Mx Player and other apps. the only apps which were installed along with the ROM were S-Voice and Beats Audio. Also im not able to use my phone as Mass Storage. Please help.
My Phone: i9003
Rooted with XXKPQ 2.3.6
Running RemICS v1.7
Maybe the apps you missed comes with the GAPPS. After flashing the rom, flash the GAPPS for remics. Find it in the thread.
Thanks Mate
marshygeek said:
Maybe the apps you missed comes with the GAPPS. After flashing the rom, flash the GAPPS for remics. Find it in the thread.
Click to expand...
Click to collapse
Thanks Mate. Actually I didnot wipe the cache and data before installing the ROM. That gave me way. Solved it.
I placed Custom ROM [cm-7-20130201-NIGHTLY-s5670] in SD card and then after removing Sim card i booted my phone in recovery mode then wiped data and cache, and after that i applied update from that custom ROM.. it got stuck in ANDROID written on it.. i've waited for 40 mins and re-read the instructions.. then i found my mistake and tried to install custom Recovery CWM [beni_cwm-5_ext4_v2] by tj_styles.. and it blew my recovery mode also... now my phone is only booting in download mode. can i repair it.? plz help me dev :crying:
Flash back to gingerbread!
Flash back to Gingerbread with Odin.
Here a Video:
http://www.youtube.com/watch?v=zQ-f92hc8NE
Thanks for quick support..
FurFur_ said:
Flash back to Gingerbread with Odin.
Click to expand...
Click to collapse
first of all thanx for helping and
can i install already downloaded custom rom (cm7 nightly) instead of gingerbread?
yes.
First follow the instructions at the video.
then you can install cm7.
but first follow the video
akii.bh said:
...
...
and can i install already downloaded custom rom (cm7 nightly) instead of gingerbread?
Click to expand...
Click to collapse
* Flash Stock Gingerbread via Odin
* Then flash CWM recovery via Odin (One package)
* & then goto CWM of ur phone & flash Cyanogen.
Remember to format /system also if U R flashing Cyanogen for the 1st time...
Happy flashing...:thumbup:
Sent Via XDA™ Premium
To flash Cm7
U hav to first update ur fit to 2.3.x or gb.......
For dat use Odin.....
Der is tutorial to update ur fit to gb in YouTube.....just follow dat
To flash Cm7
Wipe data
Wipe cache
Wipe dalvik cache
Format system
mount system
Instal the zip file of ROM
Reboot......
PRESS THANX IF I HELPED U
vinayaksuresh said:
To flash Cm7
U hav to first update ur fit to 2.3.x or gb.......
For dat use Odin.....
Der is tutorial to update ur fit to gb in YouTube.....just follow dat
To flash Cm7
Wipe data
Wipe cache
Wipe dalvik cache
Format system
mount system
Instal the zip file of ROM
Reboot......
PRESS THANX IF I HELPED U
Click to expand...
Click to collapse
Hey Bro! Don't need 2 mount /system...!!!
Sent Via XDA™ Premium
Thnx Friends..! it's fixed and i m on CM7 Nightly by tjstyle..
Thanks to all... i've installed gingerbread 2.3.6 and then cm7 nightly....
and is ROM manager safe...? it is installed automatically with CM7 and i wish to try "Cyanogenmod 10 by Yajnavalkya" Can I install it like previous one or i have to uninstall ROM manager first?
akii.bh said:
Thanks to all... i've installed gingerbread 2.3.6 and then cm7 nightly....
and is ROM manager safe...? it is installed automatically with CM7 and i wish to try "Cyanogenmod 10 by Yajnavalkya" Can I install it like previous one or i have to uninstall ROM manager first?
Click to expand...
Click to collapse
Don't ever use ROM Mngr. or u'll end up bricking ur device. CM 7 includes it but don't touch it...
Flash CM 10 by yajnab like CM7. No need 2 to touch rom mngr.
Sent Via XDA™ Premium
Warning [rom manager]
Galaxy_Rohit said:
Don't ever use ROM Mngr. or u'll end up bricking ur device. CM 7 includes it but don't touch it...
Flash CM 10 by yajnab like CM7. No need 2 to touch rom mngr.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Yes! Dont you ever try to touch ROM Manager. [WARNING]. you will may end up with a BRICKED galaxy fit. (btw its supported by galaxy fit, but better is not to touch it) and one advise....is as soon as you boot in cm7, remove ROM manager..
and yes you can try CM 10 RC2 by yajanab..its good, and you can try CM10.1 by erikcas as well.
happy flashing
thnx for the warning, now m moving to cm 10
cosmickamal said:
Yes! Dont you ever try to touch ROM Manager. [WARNING]. you will may end up with a BRICKED galaxy fit. (btw its supported by galaxy fit, but better is not to touch it) and one advise....is as soon as you boot in cm7, remove ROM manager..
and yes you can try CM 10 RC2 by yajanab..its good, and you can try CM10.1 by erikcas as well.
happy flashing
Click to expand...
Click to collapse
i just opened it once and i didn't used any option of ROM manager.. thnx for the support guys.. now m moving to cm 10
I simply delete the rom manager apk from the zip file of the rom before flashing . It atleast makes some space in the /system
Sent from my GT-S5670 using xda premium
akii.bh said:
i just opened it once and i didn't used any option of ROM manager.. thnx for the support guys.. now m moving to cm 10
Click to expand...
Click to collapse
enjoy cm10. Stay Happy.
cosmickamal said:
enjoy cm10. Stay Happy.
Click to expand...
Click to collapse
To be very true Cm10.1 latest build is way better than Cm10 Rc2.. No offence.
Cm10.1 is smooth and the camera works also smooth video recording as compared to cm10.
check it your self.
Good work by both the devs (Erickas and Yajnab) :good:
Rohit02 said:
To be very true Cm10.1 latest build is way better than Cm10 Rc2.. No offence.
Cm10.1 is smooth and the camera works also smooth video recording as compared to cm10.
check it your self.
Good work by both the devs (Erickas and Yajnab) :good:
Click to expand...
Click to collapse
yeah i tried both. cm10 n 10.1 and i agree 10.1 is better than 10. and you pls try cm9 as well...its also very good. now i am eagerly waiting for an update to all these roms. right now on official cm7.
Sent from my GT-S5670 using Tapatalk 2