Hi,
I'm trying to access ADB shell of a device (Samsung Galaxy s4 Mini LTE) where Androis 4.2 is installed.
Obviously it won't pass me because of missing public key on a device.
/adt-bundle-linux-x86_64-20140321/sdk/platform-tools $ ./adb devices
List of devices attached
x.x.x.138:5555 unauthorized
xxxx17d3 unauthorized
I have an access to ADB shell of a CWM installed on recovery partition and through that shell I'm able to access filesystem.
I have tried of: adb push ~/.android/adbkey.pub /data2/data/misc/adb
where /data2 is: mount /dev/block/platform/msm_sdcc.1/by-name/userdata /data2
But this is not working.
Anything else I could try?
There are apps out there that let you control your device remotely. But these still depend on you being able to install and launch the program.Using a package called Screencast you can get the image from the screen on your computer. It runs on your computer and doesn’t need to be installed on the phone, but it will require a rooted phone.
The phone is rooted but I can not install any apps because I cannot access ADB shell nor use display because it is all black and no touchscreen is working. Not a single pixel is lit up on a screen.
I have a rooted s6 edge, I used cf's auto root method, however my phone is not encrypting properly (let it run for 4 hours last night before interrupting process) Will the s6 not encrypt if rooted, or if knox has been broken? Any advice on how to resolve this?
try a different method like rooting apk
i know i'm late but here's the fix:
1. The latest busybox needs to be installed.
2. After enabling USB Debugging on your phone, you need to go to adb shell on your PC and type su for root access . Accept the root permission request on your phone. You will then see in adb that the $ will turn into #
3. Type following command: pkill -KILL daemonsu
This will temporarily disable supersu/root. (You see that the # will turn back into $. Also you'll see your apps won't be able to gain root access). After encrypting your phone will be automatically rooted again.
4. Do NOT open SuperSu afterwards or reboot. Just start with encryption.
Just an extra note, since I ran into this.
The issue is that the encryption process tries to unmount /data, but doesn't know about the dameonsu process which has one or more files open. The unmount fails and the encryption hangs. The only way out is a hard reboot (hold power + volume down) and a factory reset.
Once you kill the daemon, be sure to exit adb as that will also hold /data mounted.
If it just shows a lock and the word "Encrypting" but no other activity, it's stuck and you'll have to reset it. If it works, it will reboot to the Verizon screen then show a % complete screen.
MTK ADB gets you a privileged shell at the push of a button, allowing you to run commands directly on your MediaTek device. Some might wonder if rooting hasn't already solved this. Firstly, root access is persisted by modifying system files. When the real binary gets substituted by that of the root app's, if the device is rebooted, the init daemon running as root runs the binary giving the app root. What's wrong with this? If you have “purist” tendencies, you probably would want your phone as stock as possible, or at least with your permission. Sadly, not only binaries are dumped. Extra temp files, logs and helper binaries too, that manually removing them is like dancing on floor of pins and a prick means a brick. Not only that, consider yourself blocked from updates. If you're unfortunate enough, an update could result in bricking your phone as the files supposed to be present had been changed. This is more common than you think. MTK ADB makes no changes to your files whatsoever. Also, there's the matter of security/privacy. Root apps tend to always do something in the background. Either sneaking in a new app, or phoning home with your private data, or both. MTK ADB doesn't steal your data. The Internet permission is for Telnet, etc. On some devices, MTK ADB can get root access (depending on manufacturer) while all devices can get shell access. You just have to check which yours belongs.
IMPORTANT
•Refresh before (and after) clicking Start to check ADB status.
•Supports all ADB functionality. Just run "adb <command>" eg "adb pull" (without quotes).
•The minimalist terminal is for those who haven't any. Feel free to use your regular terminal (I use Terminal IDE) and keyboard (Hacker's Keyboard is really good). Just run "adb shell" on it.
•You can connect to your device using another phone, PC, or anything with a terminal and in the same network by running "adb connect IP_address".
•If you get a " device offline" error, disable and enable USB debugging. Next time connect to the network before running the app.
http://www.youtube.com/watch?v=_bt8BVaDCf0
http://slaycode.WordPress.com
Bump
Proof:
http://forum.xda-developers.com/gen...iled-error-t3191150/post62611445#post62611445
More Proof:
http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546/page10
Proof:
http://forum.xda-developers.com/gen...iled-error-t3191150/post62611445#post62611445
More Proof:
http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546/page10
When I open the app it opens but it doesn't work when I enter the commands and moreover the app when I try to start the adb it says unsupported device
Am using infinix hot 4 pro running NOUGAT xos 2.2
LordFME said:
MTK ADB gets you a privileged shell at the push of a button, allowing you to run commands directly on your MediaTek device. Some might wonder if rooting hasn't already solved this. Firstly, root access is persisted by modifying system files. When the real binary gets substituted by that of the root app's, if the device is rebooted, the init daemon running as root runs the binary giving the app root. What's wrong with this? If you have “purist” tendencies, you probably would want your phone as stock as possible, or at least with your permission. Sadly, not only binaries are dumped. Extra temp files, logs and helper binaries too, that manually removing them is like dancing on floor of pins and a prick means a brick. Not only that, consider yourself blocked from updates. If you're unfortunate enough, an update could result in bricking your phone as the files supposed to be present had been changed. This is more common than you think. MTK ADB makes no changes to your files whatsoever. Also, there's the matter of security/privacy. Root apps tend to always do something in the background. Either sneaking in a new app, or phoning home with your private data, or both. MTK ADB doesn't steal your data. The Internet permission is for Telnet, etc. On some devices, MTK ADB can get root access (depending on manufacturer) while all devices can get shell access. You just have to check which yours belongs.
IMPORTANT
•Refresh before (and after) clicking Start to check ADB status.
•Supports all ADB functionality. Just run "adb <command>" eg "adb pull" (without quotes).
•The minimalist terminal is for those who haven't any. Feel free to use your regular terminal (I use Terminal IDE) and keyboard (Hacker's Keyboard is really good). Just run "adb shell" on it.
•You can connect to your device using another phone, PC, or anything with a terminal and in the same network by running "adb connect IP_address".
•If you get a " device offline" error, disable and enable USB debugging. Next time connect to the network before running the app.
http://slaycode.WordPress.com
Click to expand...
Click to collapse
Are you familiar with an APK that utilizes mtk_bypass to directly flash firmware to device.
I'm looking for an APK that basically does what sp flash tool does because I don't have a computer.
Hey, long time reader, first time poster.
The problem is that I am trying to edit build.prop, however after edits it cannot be saved as I have not yet gained root write access.
The context is that I need an app to believe I am a different device than I actually am.
The complications are that I only have one boot mode apparent (no recovery or download mode) and no usb connection access (only host USB A type ports). I have tcpip adb access, however when I go to cp 'su', 'busybox' and 'Superuser.apk' from tmp to bin I face the read only problem.
What I've tried so far; just about all of the 'one click root' options. Pressing/holding/tapping every physical button on the device while rebooting to try to get to an alternate boot.
My history is plenty of rooting/jailbreaking/writing etc. I'm 3rd year Computer Engineering, so I'll follow a fair bit of technical direction, but I'm definitely no pro.
Looking forward to hearing from you guys, thanks in advance!
Update
In addition, I should clarify I've tried 'adb reboot-bootloader' and 'adb reboot recovery', both with no advances. Can anyone offer anything else to try?
Hi,
I think I've already explain everything in title.
My Galaxy S5 on Android 8 (I think) as her screen broken (black)
Before that it already wokr badly and slowly. I bought a new phone but this one break just before I can transfer data.
I can unlock the patern (I know that because the volume + buton react)
Smart switch say that the phone is locked (even it's not true). Tested on 2 PC
The phone appear in Windows but no file or folder appear.
In adb the device is shown unauthorised and even if I click where the message to unlock should be, notihng append.
The phone is connected on Wifi, apparear in Google Find it but not Samsung find it...
I think that it's already to much information...
My question : how can I do the unlock the phone and do a smart switch backup ? or an other way to transfer data.
Regards
James
The Samsung Galaxy S10 comes with a USB OTG adapter. OTG stands for "On the Go" and is used for the connection between smartphone and USB stick / cable. Connect this USB OTG adapter to the USB Type C port of your Samsung, then connect the USB OTG adapter with USB Type C port of your computer.
You should see the data stored on your Samsung.
jwoegerbauer said:
The Samsung Galaxy S10 comes with a USB OTG adapter. OTG stands for "On the Go" and is used for the connection between smartphone and USB stick / cable. Connect this USB OTG adapter to the USB Type C port of your Samsung, then connect the USB OTG adapter with USB Type C port of your computer.
You should see the data stored on your Samsung.
Click to expand...
Click to collapse
It's an S5. But I have a OTG adaptor for it but my new phone A52s doesn't connect to the S5.
I try with a S7 but I can see that there is a lot autorisation to give on the old phone which will be very hard to do with a black screen.
If ADB is unauthorized, the only way to back up any data would be via a custom recovery. That would require that the device have an unlocked bootloader though
iBowToAndroid said:
If ADB is unauthorized, the only way to back up any data would be via a custom recovery. That would require that the device have an unlocked bootloader though
Click to expand...
Click to collapse
ADB authorised is not require for Smart Switch... I think
And my device have access to recovery and it's root so the bootloader is unlocked.
jameslevalaisan said:
ADB authorised is not require for Smart Switch... I think
And my device have access to recovery and it's root so the bootloader is unlocked.
Click to expand...
Click to collapse
So then flash a custom recovery, and then enter it. That will either give you MTP access to the files and folders, or ADB should also be enabled - and does not require authorization
iBowToAndroid said:
So then flash a custom recovery, and then enter it. That will either give you MTP access to the files and folders, or ADB should also be enabled - and does not require authorization
Click to expand...
Click to collapse
purehaps you have forget that the screen is broken. I can't access the phone for complicated manipulation. I'have already have TWRP installed on it but without a view it's impossible to manipulate it. Also, it's not normal that the phone are not viewed on windows or is shown locked on smart switch.
In recovery mode, the phone isn't show on windows also. Find the MTP option in TWRP without a screen view is very diffucult and dangerous, (the wipe option are near)
If I can access file on phone I will be able to view screenshot and configure it.
jameslevalaisan said:
purehaps you have forget that the screen is broken. I can't access the phone for complicated manipulation. I'have already have TWRP installed on it but without a view it's impossible to manipulate it. Also, it's not normal that the phone are not viewed on windows or is shown locked on smart switch.
In recovery mode, the phone isn't show on windows also. Find the MTP option in TWRP without a screen view is very diffucult and dangerous, (the wipe option are near)
If I can access file on phone I will be able to view screenshot and configure it.
Click to expand...
Click to collapse
1. No, I didn't forget that the screen is broken
2. I wasn't telling you to press anything in TWRP. When it's in TWRP and you plug it in, you will either get MTP and/or ADB access automatically
3. Yes, it is perfectly normal to not have access to the files and folders in Windows, when it's powered on normally. There's a popup on the phone that you have to tap in order to grant permission to the folders and files. That's why it shows up as an empty device when you plug it in while in normal mode
iBowToAndroid said:
1. No, I didn't forget that the screen is broken
2. I wasn't telling you to press anything in TWRP. When it's in TWRP and you plug it in, you will either get MTP and/or ADB access automatically
3. Yes, it is perfectly normal to not have access to the files and folders in Windows, when it's powered on normally. There's a popup on the phone that you have to tap in order to grant permission to the folders and files. That's why it shows up as an empty device when you plug it in while in normal mode
Click to expand...
Click to collapse
Ok excuse me.
Hum when I'm in recovery mode, my phone doesn't appear in Widows. And in adb, I haven't access to all folder. Data is empty for exemple.
For 3. Ok, I don't remember this notification. But I'm shure that I'have already use this phone with my PC. If I wasn't able to ring it on Whastapp, I will think that the phone doesn't works anymore at all. But it's not the case.
jameslevalaisan said:
purehaps you have forget that the screen is broken. I can't access the phone for complicated manipulation. I'have already have TWRP installed on it but without a view it's impossible to manipulate it. Also, it's not normal that the phone are not viewed on windows or is shown locked on smart switch.
In recovery mode, the phone isn't show on windows also. Find the MTP option in TWRP without a screen view is very diffucult and dangerous, (the wipe option are near)
If I can access file on phone I will be able to view screenshot and configure it.
Click to expand...
Click to collapse
ADB commands work by default while in TWRP, you can back up almost anything that your TWRP version allows through your PC using ADB commands, TWRP will serve as intermediary, but you will not go to operate over your broken screen device but through your ADB/fastboot CMD.
In normal mode I can unlock the phone but after that even if I click where the message should appear it doesn't do anything.
In adb I can't access a backup command (and if I can do this, It will not the easyer way to transfer my sms.)
I have some old other phones to see some message exemple and know where to clic but it doesn't works. I have install Vyzor, It asks me a permission but even if I tap in the right of the screen the permission doesn't works.
I also try to transfert a new adb key but I think it doesn't work because Wyzor still ask permission.
jameslevalaisan said:
In normal mode I can unlock the phone but after that even if I click where the message should appear it doesn't do anything.
In adb I can't access a backup command (and if I can do this, It will not the easyer way to transfer my sms.)
Click to expand...
Click to collapse
There is no backup command in ADB that you can use. And the reason that you can't access /data is because that requires going into TWRP settings and mounting the system partition.
What you can do in TWRP is to adb pull all of the files and folders off of the internal storage
Other thing, I can phone my phone with Whatsapp but I can't click to hang off.
iBowToAndroid said:
There is no backup command in ADB that you can use. And the reason that you can't access /data is because that requires going into TWRP settings and mounting the system partition.
What you can do in TWRP is to adb pull all of the files and folders off of the internal storage
Click to expand...
Click to collapse
ok to do have a exemple of command to tap ?
And there no way to just be able to connect my phone with smart switch on windows ?
jameslevalaisan said:
I have some old other phones to see some message exemple and know where to clic but it doesn't works. I have install Vyzor, It asks me a permission but even if I tap in the right of the screen the permission doesn't works.
I also try to transfert a new adb key but I think it doesn't work because Wyzor still ask permission.
Click to expand...
Click to collapse
ADB backup is not to operate while your device is on, but it is to operate while your device is in TWRP mode.
TWRP has integrated by default the ADB options not need to authorize through your broken screen because it is already authorized.
Messages as an app user (the same with root or system user) is part of userdata, you want to back up userdata to restore it after in other device or a scenery where your device get repaired, no?
I'll give you an example, you have to use this command, create a folder on a convenient place onto your PC directory, something like "BACKUP", assuming that you set it up correctly the environment for ADB/fastboot to use it along all of your system, you should open from this newly created folder an CMD (I use the new Windows terminal for easy/comfortable results) then type from the terminal adb shell twrp backup userdata , you'll have the userdata backed up in your PC in less of 2 minutes depending on the size of the partition, and so on successively.
What you can back up from TWRP depends on the restrictions from your TWRP version, you should back up the normal that you can see from the TWRP screen and even more but for example if your TWRP have some issues mounting vendor partition of course the ADB commands can't do the job for this specific partition, but anyway you have a lot you can do through it.
jameslevalaisan said:
ok to do have a exemple of command to tap ?
And there no way to just be able to connect my phone with smart switch on windows ?
Click to expand...
Click to collapse
1. The command depends on what the mount point for your internal storage is. The command would be "adb pull /(mount point)" , so it could be:
adb pull /sdcard
adb pull /storage0/sdcard
Or several others
2. No, you can't connect with Smart Switch without allowing permission on the popup box on the phone screen
Hi guys,
I'm very happy to find here some people to help me. thank you a lot. I just now in recovery mode.
here is some result of command
Code:
adb devices
List of devices attached
487e969e recovery
adb root
adbd is already running as root
adb shell
~ # ls
cache init.recovery.qcom.rc selinux_version
charger init.recovery.service.rc sepolicy
data init.recovery.usb.rc service_contexts
default.prop license sideload
dev oem sys
etc prebuilt_file_contexts system
file_contexts proc tmp
fstab.qcom property_contexts twres
init res ueventd.qcom.rc
init.rc root ueventd.rc
init.recovery.hlthchrg.rc sbin vendor
init.recovery.nano.rc seapp_contexts
~ #
as you can see there is not storage in the ls result
Code:
~ # ls /res
images keys
~ # ls /data
~ # ls /data
Code:
adb pull /data/data/com.android.providers.telephony/databases/mmssms.db ./
adb: error: remote object '/data/data/com.android.providers.telephony/databases/mmssms.db' does not exist
Is there something inspired you ?
iBowToAndroid said:
1. The command depends on what the mount point for your internal storage is. The command would be "adb pull /(mount point)" , so it could be:
adb pull /sdcard
adb pull /storage0/sdcard
Or several others
2. No, you can't connect with Smart Switch without allowing permission on the popup box on the phone screen
Click to expand...
Click to collapse
1. the ls command doesn't show any sdcard or storage
2. Ok bit wyh I can't click on the permission popup ?
SubwayChamp said:
ADB backup is not to operate while your device is on, but it is to operate while your device is in TWRP mode.
TWRP has integrated by default the ADB options not need to authorize through your broken screen because it is already authorized.
Messages as an app user (the same with root or system user) is part of userdata, you want to back up userdata to restore it after in other device or a scenery where your device get repaired, no?
I'll give you an example, you have to use this command, create a folder on a convenient place onto your PC directory, something like "BACKUP", assuming that you set it up correctly the environment for ADB/fastboot to use it along all of your system, you should open from this newly created folder an CMD (I use the new Windows terminal for easy/comfortable results) then type from the terminal adb shell twrp backup userdata , you'll have the userdata backed up in your PC in less of 2 minutes depending on the size of the partition, and so on successively.
What you can back up from TWRP depends on the restrictions from your TWRP version, you should back up the normal that you can see from the TWRP screen and even more but for example if your TWRP have some issues mounting vendor partition of course the ADB commands can't do the job for this specific partition, but anyway you have a lot you can do through it.
Click to expand...
Click to collapse
I try this...
C:\Users\James-23\AppData\Local\Android\Sdk\platform-tools>adb shell twrp backup userdata
TWRP does not appear to be running. Waiting for TWRP to start . . .
Press CTRL + C to quit.
^C
C:\Users\James-23\AppData\Local\Android\Sdk\platform-tools>adb shell twrp plat-form-tools userdata
TWRP does not appear to be running. Waiting for TWRP to start . . .
Press CTRL + C to quit.
^C
I'm not sure I understand your command. But it return a result. "Backup" is the name of a folder ? or it's a commande for twrp ?
Is there a way to be sure that twrp is installed (with all my phone, sometime, I don't remember what is on it. The thing it's sure it that this phone is root because I use root function with some app but perhaps just with magisk or Super SU.